Save this Search
     

All JobsEngineering & Manufacturing

 (49,678 results)  
Sort by:
  • Posted Date
Fixed Price: $25 - $30   |  Posted: 22 minutes ago  |  Ends: 14d, 23h  |   0 Proposals
See attached for 20 questions based on advanced production management which i need done asap. Need someone with the relevant experience and knowledge to complete these questions in a timely fashion! Need in a couple hours.
Category: Mechanical       

i****ys4
 [?]
Sign in to view client's details.
| i****ys4
|    Trinidad And Tobago
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 1h, 17m ago  |  Ends: 14d, 22h  |   0 Proposals
I NEED A PROJECT FILE FOLDER PUT TOGETHER. ONLY PERSON THAT CAN DO THIS IS SOMEONE WHO HAS KNOWLEDGE IN BUILDING INDUSTRY REQUIREMENTS OF SOUTH AUSTRALIA. THE FOLDER NEEDS TO HAVE THE FOLLOWING THIS ALL CAN BE JUST SAMPLES , THEY DONT NEED TO RELATE TO ANY PROJECT EXACTLY. CAN BE VARIOUS DOCUMENTS OF DIFFERENT SITES (MAINLY SO THAT I CAN GET A GUIDE ON WHAT NEEDS TO BE DONE AND HOW) SO NEEDS TO BE ALL FILLED WITH INFO. DEVELOPMENT APPLICATION -- done PERMITS - done BUILDING CONTRACT PLANS - done SITE SAFETY POLICY- done SCHEDULE OF WORK QUALITY CONTROL CHECK-LIST SITE INSTRUCTIONS - done SITE REPORTS - done BUILDING INSPECTION OF ADJOINING PROPERTY - done SITE ESTABLISHMENT INC TRAFFIC MANAGEMENT WASTE MANAGEMENT PLAN PURCHASE ORDER - done CLAIM FOR PROGRESS FORM - done VARIATION- done INSURANCE-done HANDOVER KIT TO INCLUDE CERTIFICATE OF COMPLETION DEFECT LIST -done CERTIFICATE OF COMPLIANCE FORM 1 SCHEDULE OF FINISHES so the ones that say (done) i have those documents but th...
Category: Civil & Structural       

j****990
 [?]
Sign in to view client's details.
| j****990
|    Australia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 1h, 18m ago  |  Ends: 14d, 22h  |   0 Proposals
I have a wave file of dtmf tones. I like to right a loop that reads through the file detecting the dtmf tones contained in it
Category: Electrical       
Skills: Electrical Engineering, MathCAD, Electronics       

i****njm
 [?]
Sign in to view client's details.
| i****njm
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 2h, 40m ago  |  Ends: 14d, 21h  |   1 Proposal
Want to create a blood pressure cuff that accomodates obese people. It will be able to more precisely measure the systolic and diastolic pressure of a person with a much larger arm circumference. Due to the current inaccuracy of readings of these people, will likely likely require a new design of the cuff. Want to hire someone to produce this design and detailed computer sketches of a prototype. Please message me if interested.
Category: Product Design       
Skills: Biotechnology, Product Design       

J****ng7
 [?]
Sign in to view client's details.
| J****ng7
|    United States
Fixed Price: Not Sure   |  Posted: 3h, 29m ago  |  Ends: 14d, 20h  |   0 Proposals
Hello I am looking to establish an ongoing professional working relationship with an experienced store fixtures / furniture technical drafter / engineer / detailer who uses Solidworks 2015. He / She must be very good with Solidworks, have minimum 5 years experience in furniture industry. The right person must understand joinery types, materials and manufacturing procedures used in furniture industry. I need to find a person who understands terms like tongue and groove, dado / rebates, clearance and other industry specific terminology. Please do not apply if you are not familiar with these terms. The jobs will consist in getting a designer's drawing ( which usually is just few elevations and maybe some rough section views ) and convert them into production drawings, with joinery, predrilled holes for hinges / slides or other accessories. It is necessary to include Bill of Materials ( BOM ) with accurate cut sizes, material descriptions ( this will be provided by me ? just input where...
Category: CAD       

C****uji
 [?]
Sign in to view client's details.
| C****uji
|    Canada
Fixed Price: Not Sure   |  Posted: 5h, 33m ago  |  Ends: 14d, 18h  |   3 Proposals
I need to work to render 3D images for a building of 4 floors and 8 apartments . I need also 3 humanized plant models for the types of building the apartment
Category: 3D Modelling       
Skills: 3D       

p****ote
 [?]
Sign in to view client's details.
| p****ote
|    Brazil
Fixed Price: $500 - $1,000   |  Posted: 5h, 44m ago  |  Ends: 14d, 18h  |   7 Proposals
I need a 3D CAD operator with experience in product design and manufacturing to take a design from a 2D illustrations and reference from physical prototypes. Ideally the CAD file can be used for more realistic renders.
Category: CAD       
Skills: AutoCAD, Product Design       

l****rpe
 [?]
Sign in to view client's details.
| l****rpe
|    Australia
Hourly Rate: $40 - $50 / hr   |  Duration: 7-9 months  |  Posted: 5h, 49m ago  |  Ends: 14d, 18h  |   2 Proposals
Description: Perform work required to validate pharmaceutical equipment, GMP utilities, control systems and processes. Write protocols and reports in collaboration with Validation QA, and manufacturing. Work on multiple projects simultaneously. Responsibilities would include but are not limited to the following areas: fermentation, recovery and purification, aseptic and bulk filling operations, process utilities, multi-product equipment, cleaning, sterilization, thermal mapping, and control systems validation. Ability to work independently and within project teams. Minimum Requirements: B.S. in biological sciences, chemistry, or engineering with 3 plus years of manufacturing, engineering or QA/QC experience. Must have a minimum of 3 years direct/hands on experience with the validation of processes, equipment or facilities. Experience with Validator 2000 and/or ValProbes a plus.
Category: Other - Engineering &...       

a****hah
 [?]
Sign in to view client's details.
| a****hah
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: 5h, 52m ago  |  Ends: 14d, 18h  |   0 Proposals
The project is to analyze "partial half-wave rectification" at the interface between an electrode and biological tissue according to the references cited below. We'd like to start with an overview of how you'd approach the project. Provided you have the required expertise, we are willing to pay for that overview. The goal is to produce a set of graphs that show the degree of partial half-wave rectification according to various parameters (e.g. frequency and amplitude of the wave outputted at the electrode). Here are some references relevant to this work: Merrill, D. R., M. Bikson and J. G. Jefferys (2005). "Electrical stimulation of excitable tissue: design of efficacious and safe protocols." J Neurosci Methods 141(2): 171-198. McAdams, E. T. and J. Jossinet (1994). "The detection of the onset of electrode-electrolyte interface impedance nonlinearity: a theoretical study." IEEE Trans Biomed Eng 41(5): 498-500. McAdams, E. T. and J. Jossinet (1994). &qu...
Category: Chemical Engineering       

c****nkw
 [?]
Sign in to view client's details.
| c****nkw
|    United States
Fixed Price: Not Sure   |  Posted: 6h, 10m ago  |  Ends: 14d, 17h  |   4 Proposals
Looking for an Exterior Design; with Drive-thru, that is 100% up to USA standards, codes, and guidelines. Design will need to include different textures, designs, logo's, parking lot, and landscaping. Looking for an interior design that is similar to Wendy's, Chick-fil-a, and Chipotle. Needs to be in USA measurements, store size between 2800 - 3100 sqft.
Category: Architecture       
Skills: ArchiCAD, Architecture, AutoCAD, AutoCAD 2012       

m****son
 [?]
Sign in to view client's details.
| m****son
|    United States
Fixed Price: Not Sure   |  Posted: 6h, 10m ago  |  Ends: 29d, 17h  |   0 Proposals
Hello, I am currently a Junior studying Finance at Indiana University. My summer is coming up and I'm passionate to pursue my entrepreneurial dream. I have great ideas for consumer products. The technology needed to make these products is surely present just applied differently and I need a engineer who can work with bluetooth connection from a smart phone device to a type of camera. The thing is I would not pay you a salary but instead you will receive a piece of equity. In other words I am looking for a developer to become my co- founder. I truly believe these products will be of tremendous value for all. If you are inspired to create value for the world please join my team! - Kenneth Linares ii
Category: Product Design       
Preferred Location: United States

K****s64
 [?]
Sign in to view client's details.
| K****s64
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 6h, 35m ago  |  Closed  |   7 Proposals
I have finished floor plans for a two story house, 5000 SQFT. I would like someone to create a section elevation for me for the east section and west section. I will specify the points on the plan where for each section I want done. I will send my floor in an Auto CAD file, meaning you must have autoCAD (2014 at least) and do the sections through auto CAD.
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD, Drafting       

s****rch
 [?]
Sign in to view client's details.
| s****rch
|    United States
Hourly Rate: $30 - $40 / hr   |  Duration: 7-9 months  |  Posted: 7h, 2m ago  |  Ends: 25d, 13h  |   5 Proposals
Responsibilities o Provide technical support related to concrete production and construction process including promoting adequate use of guidelines and the implementation of best practices: assist jobsites in the evaluation and optimization of the mix designs and selection of materials; review pre-and post-bid concrete documents including mix designs, specifications, quality procedures, etc.; advice on new improved technologies; and troubleshoot concrete production and construction. o Monitored the quality of aggregates and production of ready mix concrete, evaluate aggregate properties and quality of potential sources of raw materials, designed concrete mixture proportions, perform site inspections, repairs and non-destructive field testing, evaluated structural properties and capacity of building materials, investigated and implement new products, perform feasibility studies, developed new materials technologies, coordinate concrete sampling and testing for different constru...
Category: Civil & Structural       

o****rog
 [?]
Sign in to view client's details.
| o****rog
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 7h, 32m ago  |  Ends: 14d, 16h  |   1 Proposal
Need assistance with completion of structural drawings for a residential project. Drawings are 70% complete (estimated). Primarily need assistance with cleanup based on engineer markup, addition of details, etc. No designing at this point. Must be located in the US or Canada and have previous experience with structural drafting.
Category: CAD       
Skills: 3D Modeling, Architecture, AutoCAD       
Preferred Location: North America

b****215
 [?]
Sign in to view client's details.
| b****215
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 8h, 6m ago  |  Ends: 14d, 15h  |   1 Proposal
want to create a very simple 5" tall by 8" long (estimated) canvas pouch. It would carry 4 bars of surf wax, with several 3 outside pockets to accommodate a wax comb, a fin key and a tube of sunscreen. This bag would be used by a surfer to carry the essentials. Either left in their car or carried to the beach.
Category: Product Design       

m****her
 [?]
Sign in to view client's details.
| m****her
|    United States
Hourly Rate: $15 - $20 / hr   |  Duration: Not Sure  |  Posted: 8h, 17m ago  |  Closed  |   2 Proposals
I have a five star task seating base that I've drawn up in Rhino that needs to be fixed for a presentation model. I need the model cleaned up with certain fillets applied (in solid works). I will include my original curves, the five star base without any fillets and a rough section that you can use for fillet example. Don't worry about any underneath wall thickness/ribs. No one will see that. Deliverables will be. Five star base fixed in Solidworks and fillets applied (inches/decimal). The main cylinder will have very tight fillets (.0156") and the five legs will have (.0625"). The cylinder that rest on top of caster will also have a (.0156") fillet. Save it as both IGES and Solidworks I can't imagine it will take more than a few hours. I've provided a lot of data that should speed things up. I want to have it done by Monday if possible.
Category: Product Design       
Skills: SolidWorks       

g****ign
 [?]
Sign in to view client's details.
| g****ign
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: 8h, 28m ago  |  Closed  |   0 Proposals
I have a five star task seating base that I've drawn up in Rhino that needs to be fixed for a presentation model. I need the model cleaned up with certain fillets applied (in solid works). I will include my original curves, the five star base without any fillets and a rough section that you can use for fillet example. Don't worry about any underneath wall thickness/ribs. No one will see that. Deliverables will be. Five star base fixed in Solidworks and fillets applied (inches/decimal). The main cylinder will have very tight fillets (.0156") and the five legs will have (.0625"). The cylinder that rest on top of caster will also have a (.0156") fillet. Save it as both IGES and Solidworks I can't imagine it will take more than a few hours. I've provided a lot of data that should speed things up. I want to have it done by Monday if possible.
Category: Product Design       
Skills: SolidWorks       

g****ign
 [?]
Sign in to view client's details.
| g****ign
|    United States
Fixed Price: Not Sure   |  Posted: 9h, 48m ago  |  Ends: 14d, 14h  |   3 Proposals
Hi everyone, we need someone that knows about GSM terminals to test a company infrastructure. Thank you,
Category: Other - Engineering &...       
Skills: Manufacturing Design, Electronics       

j****sso
 [?]
Sign in to view client's details.
| j****sso
|    France
Fixed Price: Not Sure   |  Posted: 10h, 57m ago  |  Closed  |   1 Proposal
Hi everyone, we need someone that knows about IMSI and GSM terminals to test a company infrastructure security. Thank you
Category: Other - Engineering &...       

j****sso
 [?]
Sign in to view client's details.
| j****sso
|    France
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 11h, 36m ago  |  Ends: 6d, 12h  |   11 Proposals
Custom home building company looking for design assistance on a new project in the resort area near Lake Tahoe, CA. This project has a few different components: First, would need to take existing plans that are in CAD and convert into Revit format. Would then make revisions/modifications to the design, including reversing the floor plan, expanding some spaces, and altering roof lines/structure. Separately, there is a barn garage structure that has a basic plan in .pdf. Would need to re-draw this in Revit, implementing red-lined revisions to the scale and proportions. After this is complete, these structures need to be situated on to a site plan/topo map, and joined by a flat roof'd, narrow connector. The objective is to get the project ready for engineering and plan review submittal. Looking forward to getting going on this as soon as possible. Thank you for your consideration.
Category: Architecture       

b****uer
 [?]
Sign in to view client's details.
| b****uer
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: 12h, 11m ago  |  Ends: 6d, 11h  |   20 Proposals
I need to get full plans drawn for a house I am going to build. I have a fairly close drawing of the floor plan. I have attached the jpgs for it. The house in my plan is currently 3800 SF + or -. I will need the full set of plans including electrical, roof, elevations, etc... Please let me know if you have any questions. I would like an architect to draw the plans. Please attach examples that you have completed for me to review. I also have interior pictures from the house we saw with a similar plan. If you'd like to see them to get an idea of our style wanted, let me know. The google drive folder is listed below:   [obscured]  /open?id=0BxPlxkJRDiwjdmN0aGRvWFctcDA&authuser=0 The link above is the home that we viewed and the plan from which the project is derived. You are surely able to see the changes that I made to the plan. We do want to make a few changes to the interior (floors, fireplace, and furniture). Also, the exterior will be a mixture of light Stucco and p...
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

k****ees
 [?]
Sign in to view client's details.
| k****ees
|    United States
Hourly Rate: Less than $10 / hr   |  Duration: Not Sure  |  Posted: 12h, 24m ago  |  Ends: 14d, 11h  |   6 Proposals
We are looking for an experienced person whom is capable of reading blue prints, surveying product quantities, applying to excel sheets, cable takeoffs and installation time estimations. Required process: 1. Recieve daily RFQs from general contractors, plus daily search on provided websites, finding projects that we would be capable of bidding. 2. Extract bill of material, include wiring and other. 3. Estimate installation time, number of engineers required. Candidates must be able to have some tool skills Any cad software Any takeoff software Be able to read blue prints Knows how to use excel sheets We are looking for a long term relationship, if this works out. First we want to try it and see how it works.
Category: Other - Engineering &...       

2****ONS
 [?]
Sign in to view client's details.
| 2****ONS *
|    United States
Fixed Price: Less than $500   |  Posted: 12h, 45m ago  |  Ends: 14d, 11h  |   2 Proposals
Hello, I am looking for a mechanic that possibly specializes in acoustic and auto engineering. I have a 3D model of what I want my invention to look like and once I hire someone for the job then I will go into further detail. I really need someone who also knows Iphones since this is a new Iphone device.
Category: Mechanical       

M****112
 [?]
Sign in to view client's details.
| M****112
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job