Save this Search
     
Sort by:
  • Posted Date
Posted: Within 24 hours
Fixed Price: Less than $500   |  Posted: 58 minutes ago  |  Ends: 14d, 22h  |   0 Proposals
I need u to use arena simulation software and save a screen shot of every step And then write analysis part in microsoft word Thanks u Submission Instructions: ? For this laboratory assignment, you are expected to do the following three exercises. Make sure you address all parts of the question and provide appropriate answers to the questions as stated. Attach a coversheet to your Assignment, with your full name and student number clearly indicated. ? Hardcopy submission of report answering these three questions. For each question include Purpose, Objectives, Model overview, Parameter values, Results (Statistics), Analysis of Results/Interpretation, Conclusions and Recommendations. ? Also submit one CD or USB containing the three .doe model files only. Note: this will not be returned. Each question is worth 15 marks, for a total mark out of 45. This assessment is worth 10% of your mark for ENGG953 in total. Question 1 (15 marks). An insurance application arrives into a system with ...
Category: Other - Engineering &...       

n****oll
 [?]
Sign in to view client's details.
| n****oll
|    United Arab Emirates
Fixed Price: Less than $500   |  Posted: 1h, 22m ago  |  Ends: 14d, 21h  |   3 Proposals
I'm looking for an electrical engineer to design the following: A circuit receives variable voltage from an SCR dimmer: (  [obscured]  /wiki/File:Lightdimmer_with_diode_bridge.svg) and passes it through to a load (a lightbulb). When the light bulb blows out, the device automatically switches the power to a backup light bulb.
Category: Electrical       

a****pel
 [?]
Sign in to view client's details.
| a****pel
|    United States
Fixed Price: $50 - $150   |  Posted: 2h, 25m ago  |  Ends: 6d, 21h  |   2 Proposals
So I am interested in possible applications of phase change material. A few kickstarters around that are using them in small amounts to keep drinks cold or hot for longer. I am looking for an engineer/product designer to put together for me a brief on using phase change material as a method of maintaining a bath at the ideal temperature. The concept below is essentially what I am looking at but using an amount of PCM to actually create the product.   [obscured]  /2012/03/19/perfectly-warmed-bath/ Would need to know feasibility, costs, effectiveness etc....to determine whether I pursue the idea. Anyone keen to help out?
Category: Other - Engineering &...       

N****L83
 [?]
Sign in to view client's details.
| N****L83
|    Australia
Fixed Price: $30 - $100   |  Posted: 5h, 0m ago  |  Ends: 14d, 17h  |   9 Proposals
I need an electrical engineer to help me design a PCB for a strain gauge indicator. I have most of the schematic already, but will also need some help connecting the already-designed circuit to the PIC18F, so some research may be in order if you don't know how to use the PIC18F. Attached is the schematic. Hope to hear from people soon and hope to get this done as soon as possible! :) Note: I will handle all the manufacturing myself.
Category: Electrical       

c****liu
 [?]
Sign in to view client's details.
| c****liu
|    United States
Fixed Price: $100 - $200   |  Posted: 5h, 45m ago  |  Ends: 6d, 18h  |   4 Proposals
We decided to redesign the dining room and washrooms. To remove the play area To Include the bar in reception are No need to have booths Redesign the room with new layout We require 3d render and new layout sketch. The interior of design needs change to effectively use material form following suppliers. The project must list material used in design with item code, item name, colors etc and supplier name.   [obscured]   (For walls, tabletops and reception, Screens)   [obscured]   (for ceiling)   [obscured]  /gallery.html (Walls and screens) Lighting:   [obscured]   (Lighting)   [obscured]  /   [obscured]  /   [obscured]  -ledlighting.com.au/   [obscured]   FLOORING:   [obscured]  /en-au/commercial-flooring (Stone) Chairs :   [obscured]  ,   [obscured]  / TVS : 40 inch Other assets ideas:   [obscured]  / (w...
Category: Interior Design       
Skills: 3D Modeling, Interior Design, SketchUp Pro       

D****ang
 [?]
Sign in to view client's details.
| D****ang
|    Australia
Hourly Rate: Not Sure   |  Duration: 1-2 weeks  |  Posted: 7h, 22m ago  |  Ends: 14d, 15h  |   11 Proposals
Please provide general pricing and current availability for an AutoCAD (or related software) project that should take 1 to 2 weeks. Our company has an office in Southampton, PA and is looking to hire a professional to assist with an process control panel CAD project. Should we reach a general agreement I will have our personnel in Southampton contact you directly with additional parameters. Thank you, Eric Vangellow
Category: CAD       
Skills: AutoCAD, 2D Design, CAD/AutoCAD       

m****mod
 [?]
Sign in to view client's details.
| m****mod
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 7h, 37m ago  |  Ends: 14d, 15h  |   8 Proposals
I have already designed and created a keychain, but no longer have access to the drawings, so I am looking for a CAD designer to take my current product, which is 2D, and put it into a CAD drawing with measurements so that I can take it to other/new machine shops. I will have at least 2 more similar keychains to do as well. I have all three physically produced, and could send pictures with some dimensions to aid in the drawing process, I just do not have the abilities/software to create this myself. As I stated before, these are largely 2D, but there are parts of them that require the machine shop to taper the item (produced from stainless steel, 1/8" thick) on a grinder. But I do not think that this would be required in the drawings, as it is not able to be included on a waterjet or laserjet machine. Please contact me if you feel you can assist me with my drawings, I will require some sort of NDA to protect my ideas. Thanks for reading, thanks for you time Garrett(ID: 69...
Category: Product Design       
Skills: 3D Design, 2D Design       

g****ens
 [?]
Sign in to view client's details.
| g****ens
|    United States
Hourly Rate: $15 - $20 / hr   |  Duration: 3-4 weeks  |  Posted: 8h, 6m ago  |  Ends: 14d, 14h  |   5 Proposals
We are seeking a designer to help us through the concept ideation, sketching, and CAD design for a prototype of a new consumer cosmetics good.
Category: Product Design       

r****ld3
 [?]
Sign in to view client's details.
| r****ld3
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 8h, 17m ago  |  Ends: 14d, 14h  |   0 Proposals
We are a company that installs wifi networks for large buildings. We have a circumstance in a large building where we have an extremely high 2.4GHz interference. We are looking for someone who can help identify the sources of interference and possible solutions to attenuate the interference such as shielding. We have a Wi-Spy 2.4/5GHz Spectrum Analyzer and have taken recordings at different parts of the building specifically next to floors and rooms that contain large motors for water pumps and elevators. We are looking for someone with experience in identifying sources of interference. Please let me know if this is something you can help with. We need to begin working on this project immediately and would like to set up a meeting to discuss next steps. Please include hourly rate in your bids. Also include schedule of availability. Thank you and looking forward for you bids.
Category: Other - Engineering &...       
Skills: 3D Modeling, Manufacturing Design       
Preferred Location: North America, Western Europe, Eastern Europe, Eastern Asia, Australia/Oceania

o****ant
 [?]
Sign in to view client's details.
| o****ant
|    Hungary
Hourly Rate: Not Sure   |  Duration: 1-2 weeks  |  Posted: 8h, 25m ago  |  Ends: 14d, 14h  |   0 Proposals
I need someone to help me do some VBA work using Excel to communicate to a power supply/tester through USB using an Agilent add-on for USB communication. We have started a crude version but need more resources to make it work on a small 10" touchscreen. There will need to be ability to scan in a part number to pull in test information from a test database.
Category: Electrical       
Preferred Location: United States

a****ler
 [?]
Sign in to view client's details.
| a****ler
|    United States
Fixed Price: $500 - $1,000   |  Posted: 9h, 15m ago  |  Ends: 2d, 14h  |   0 Proposals
We need someone to write a program plan and manual in reference to the published ESD S20.20 standard. The manual will need to support our current facility and business model.
Category: Electrical       

N****ter
 [?]
Sign in to view client's details.
| N****ter
|    United States
Fixed Price: $500 - $1,000   |  Posted: 9h, 40m ago  |  Ends: 2d, 14h  |   1 Proposal
We need someone to take all of the current published standards and our published policies and counterfeit specifications that are listed on our website and incorporate them into one manual. We will be able to supply all of the supporting documentation/standards and manual needs to cover each and every requirement that is listed in three different standards.
Category: Electrical       
Skills: Technical Writing       
Preferred Location: North America

N****ter
 [?]
Sign in to view client's details.
| N****ter
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 10h, 41m ago  |  Ends: 14d, 12h  |   4 Proposals
Design a off road hand cycle that can be used by physically athletes that improves over today's current models. (and there are not many) This is in support of a charity that provides these bikes to disabled individuals with a concentration on military personnel
Category: Product Design       

a****ski
 [?]
Sign in to view client's details.
| a****ski
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 10h, 41m ago  |  Ends: 14d, 12h  |   0 Proposals
I'm looking for an experienced pattern-maker and seamstress to construct patterns and production ready garments from sketches. I need someone who can produce made-to-order garments with no minimums. You must have a good eye for fashion and a good understanding of high quality garment construction and fit. I need someone who has experience with Contemporary Women's Wear. I also need someone who is versatile with woven and knit fabrics. You must understand on how to construct with knit fabrics and have the proper machinery. Please look through my portfolio of the designs that have been produced so you have an idea of the garments that my company produces.
Category: Contract Manufacturing       
Skills: patternmaker, seamstress       

S****tta
 [?]
Sign in to view client's details.
| S****tta
|    United States
Fixed Price: Less than $500   |  Posted: 10h, 43m ago  |  Ends: 2d, 13h  |   12 Proposals
Hi, I have a very simple plastic casing which is used to hold a battery in place within a tv controler. I would like a 3D drawing of it so i can have it 3d printed. It is about 1mm in thickness and about 90mm X 40mm in size. It has a 5mm lip around the edge which holds the battery in place. it has a few circular holes in it where it slots into the controller. I have the piece available to send to you to replicate: I would like a few very minor changes to it: i need a few extra circular holes in it and it needs to be slightly extended in 2 places (i can clearly illustrate for you) I would like 2 final stl files. One with just a single casing and one with multiple casings connected together with a 2mm spruce to reduce the printing cost. (as some printers charge you extra for multiple pieces, connecting them with a spruce will count as one object) i expect this job to be extremely easy for someone with the right skillset which probably wont take much time at all. Thanks(ID...
Category: 3D Modelling       
Skills: 3D Modeling, AutoCAD, 3D Printing, 3D Rendering       
Preferred Location: United Kingdom

e****k0o
 [?]
Sign in to view client's details.
| e****k0o
|    United Kingdom
Fixed Price: Less than $500   |  Posted: 10h, 52m ago  |  Ends: 14d, 12h  |   44 Proposals
8 Elevations & 4 plans need to be converted to an editable dwg. Files attached are a good examples of all files. Please provide a timeline.
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

B****mjj
 [?]
Sign in to view client's details.
| B****mjj
|    Canada
Fixed Price: Less than $500   |  Posted: 11h, 19m ago  |  Ends: 14d, 11h  |   19 Proposals
I have .pdf plans of an existing apartment which need to be turned into CAD drawings using layers and blocks I will provide. No site visits, no details, no 3D rendering necessary. Consideration will be given based upon proposed price and completion time. Some specifics: - Everything must be drawn using layers and blocks based on an example plan that I will provide along with the .pdf image and photos of the apartment. One existing/demolition plan, one construction plan, and one reflected ceiling plan will be drawn per the example and notes provided. - No annotation is necessary, but dimensions must match those shown on .pdf plans, and building elements must align in plan. - I have rough measurements of parts of the apartment. These will be used to scale the .pdf of the rest apartment to use as an underlay in AutoCAD, and drafter shall make intelligent choices about dimensions that are not provided. - Using PLines (polylines or shapes) to draw elements is ABSOLUTELY NOT acceptable,...
Category: Architecture       
Skills: Architecture, AutoCAD       

L****ail
 [?]
Sign in to view client's details.
| L****ail
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 11h, 21m ago  |  Ends: 14d, 11h  |   4 Proposals
We need to have a foundation designed for a house that is to be moved and rebuilt at 2117 holmes st in dallas. we are going to move the existing frame house, built 1920, to this location and set it atop a new pier foundation we will prepare there. i'd like to use sonatube piers on a concrete base at grade and use generalized local geographic information for soil profiling.
Category: Civil & Structural       

m****nek
 [?]
Sign in to view client's details.
| m****nek
|    United States
Fixed Price: Less than $500   |  Posted: 12h, 20m ago  |  Ends: 14d, 10h  |   21 Proposals
2D drawing of a mechanical press clutch plate from photographs and dimensions provided. One sheet drawing in pdf format.
Category: CAD       
Skills: 2D Design       

b****cts
 [?]
Sign in to view client's details.
| b****cts
|    United States
Fixed Price: Not Sure   |  Posted: 12h, 28m ago  |  Ends: 14d, 10h  |   4 Proposals
Water measurement unit Description The water measurement unit is used to monitor the water quality at client based on purchased licences and send the information of the water to a server where level of the measured sensors are set. The software warns the server that the water quality is poor and needs action. Hardware - working with 12V (safety at water) - Computer based - Linux OS running on the device - electronics in IP44 box - sensor for measuring pH - sensor for measuring Redox - sensor for measuring conductivity - 2pcs sensors for measuring water flow - sensor for measuring temperature - WiFi module - the sensors should NOT at any circumstances lead electricity. - enough with slowest possible processor - cheapest possible unit Client software - Linux based - possibility to connect to WiFi network (also password protected) - Data is measured from sensors and sent sent through wifi network to server - gives warning if wifi network not available - the wifi configuration for th...
Category: Electrical       
Skills: Electrical Engineering, Electronics       

i****ion
 [?]
Sign in to view client's details.
| i****ion
|    Sweden
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 12h, 45m ago  |  Ends: 14d, 10h  |   0 Proposals
Hello, we are looking for someone to help us on a project for civil aviation management are you available ?
Category: Civil & Structural       
Skills: Civil Engineering, Structural Analysis       

F****i_i
 [?]
Sign in to view client's details.
| F****i_i
|    United Kingdom
Fixed Price: Less than $500   |  Posted: 13h, 6m ago  |  Ends: 14d, 9h  |   9 Proposals
This is a RF based design. There are few requirements for this project for which more focus should be provided. Please ask for details.
Category: Electrical       

t****leo
 [?]
Sign in to view client's details.
| t****leo
|    United States
Fixed Price: Less than $500   |  Posted: 13h, 35m ago  |  Ends: 14d, 9h  |   0 Proposals
Hey, I need someone to hack the garment steamer process for men's clothing. This is for home/personal use only. Here is the steamer I have:   [obscured]  /site/conair-extremesteam-professional-handheld-garment-steamer-white-blue/6627506.p?id=1218763369275&skuId=6627506 I want someone to come up with a mechanism by which: 1. Men's shirts and trousers are steamed automatically using a hacked version of the device displayed above. Please note, the device is generally used in a vertical position and you have to control the rate at which the device moves over the clothing. 2. Both the front and side of the shirts and trousers need to go through the steaming process. 3. I would be willing to pay extra for the following services: a) Water is filled in the steamer automatically. Come up with a 3d printed module that replaces the original component and water is refilled in it automatically. b) A contraption device that flips the clothing to front and back. So I can hav...
Category: Other - Engineering &...       
Skills: Automation, Arduino, Robotics, Raspberry Pi, DIY       

g****dma
 [?]
Sign in to view client's details.
| g****dma
|    Canada
Hourly Rate: Not Sure   |  Duration: 1-2 weeks  |  Posted: 14h, 14m ago  |  Ends: 14d, 8h  |   2 Proposals
We are looking for private lessons Autodesk Inventor 2015 consultant for an beginner student in Queens NY or over other digital media.
Category: Product Design       
Skills: Autodesk Inventor       

I****eyn
 [?]
Sign in to view client's details.
| I****eyn
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job