Save this Search
     
Sort by:
  • Posted Date
Hiring Open
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 31 minutes ago  |  Ends: 14d, 23h  |   0 Proposals
I have a Next Engine 3D Scanner and Rapidworks software. I am scanning handguns and handgun magazines so I can create my own customized forms for vacuum forming holsters and magazine carriers. I am having some difficulty figuring out certain processes on rapid works. My options are continue to struggle and gain little value from the software and scanner, spend $995 on "pro care" via next engine. Or 3rd and hopefully a workable option, I would like to hire you and spend a few hours working together using a screen sharing option in order to figure out the solutions to the problems I am having. Are you VERY familiar with rapid works? I want to be sure. Please confirm this is something you could do and perhaps describe your experience using rapidworks for reverse engineering. Thank you!!!
Category: 3D Modelling       
Skills: 3D, SolidWorks, RapidWorks, 3D Systems, 3D Scanning       

F****CDH
 [?]
Sign in to view client's details.
| F****CDH
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: 37 minutes ago  |  Ends: 14d, 23h  |   1 Proposal
I have floor plans for a 152 mē apartment that I want to split in two. Approximately one third is to become a design studio with 2 work stations for which I would like an interior design proposal as a draft. No interior design work needs to be done for the apartment. You will need to provide separate floor plans for the newly created apartment and office and a 3D model in ArchiCAD.
Category: Architecture       
Skills: 3D Modeling, ArchiCAD, Architecture, AutoCAD       

p****tic
 [?]
Sign in to view client's details.
| p****tic
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 1h, 17m ago  |  Ends: 14d, 22h  |   1 Proposal
Hello! I am looking to create three to four Velcro "straps". The dimensions of each should be 12 inches wide by 60 inches long with "male" Velcro on one side and "female" Velcro on the other. I'm not even sure if Velcro material is available in these dimensions... What do you think? Once the prototypes are created I might need more. What are your thoughts on the possibility and timing of something like this? Thanks!
Category: Contract Manufacturing       
Skills: 3D Modeling, Manufacturing Design       

b****pgh
 [?]
Sign in to view client's details.
| b****pgh
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 2h, 7m ago  |  Ends: 14d, 21h  |   4 Proposals
We're looking for a designer with skills in CAD and solidworks to help us design a 3D model of an iphone6 case. ReelCase has a retractable lanyard integrated into the case. We can provide you with sketches and drawing of our iPhone5 case, and a solidworks file of our iPhone5 case upon a signature of an NDA agreement. We look forward to working with you.
Category: 3D Modelling       
Preferred Location: United States

d****ndt
 [?]
Sign in to view client's details.
| d****ndt
|    United States
Fixed Price: Not Sure   |  Posted: 3h, 0m ago  |  Ends: 14d, 20h  |   0 Proposals
I am looking for a manufacturer who can produce the gutter hanger as shown in the attached files or something similar. I would like the quote to include the screw. The material for the bracket itself is aluminum with mill finish. Quantity would initially be 10,000 brackets at a time. I am open to any design modifications which would reduce production costs. Due to shipping costs, any non-US manufacturer would need substantially lower costs for my consideration.
Category: Contract Manufacturing       

C****Ext
 [?]
Sign in to view client's details.
| C****Ext
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 3h, 29m ago  |  Ends: 14d, 20h  |   1 Proposal
Hi, We are a startup developing a line of modular handbags and are looking for someone with experience in lock design, mechanism and 3D modeling. Please get in touch if these requirements meet your skills. Thanks!
Category: Product Design       
Skills: SolidWorks       

e****tch
 [?]
Sign in to view client's details.
| e****tch
|    United States
Hourly Rate: Not Sure   |  Duration: 1-2 weeks  |  Posted: 3h, 32m ago  |  Ends: 14d, 20h  |   2 Proposals
I need a power system that can power an ODROID C1 and video camera for about 20 hours at a time. I also need to have the dimensions of the batteries that will be used. I need a time and materials estimation of what it will take to build something like this. For the specifications of the ODROID see   [obscured]   and look at the C1 page. The camera is one of the products listed on the same page.
Category: Electrical       

j****scu
 [?]
Sign in to view client's details.
| j****scu
|    United States
Fixed Price: Less than $500   |  Posted: 4h, 4m ago  |  Ends: 14d, 19h  |   18 Proposals
I have a product that is drawn in a 3d cad file I have some upgrades or changes that I need to make to it to make it mostly size changes and hardware
Category: Product Design       

r****rs1
 [?]
Sign in to view client's details.
| r****rs1
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 4h, 28m ago  |  Ends: 29d, 19h  |   1 Proposal
I drive a lot for work and want to make the car seat more comfortable. The seat it comes with unnaturally pushes the head forward, back hunch, and shoulders slouched forward. I would like to make a car cushion or support that props up the driver's torso/upper back so that upper back/shoulder posture is in a straight line. 1. I was wondering how much money & time does it take to design back cushion based on the attached 3D scan of car & photos. 2. Also wondering if you have advice about what materials to print it in (I'm guessing foam or soft plastic with some whiffle ball-like holes to make it breathable, but this is just a guess so I'm open to suggestions) 3. Does your company do the 3D printing too, or do you give me the file and i can send it to one of the 3D printing companies. Thanks!!
Category: 3D Modelling       

L****You
 [?]
Sign in to view client's details.
| L****You
|    United States
Fixed Price: Less than $500   |  Posted: 4h, 54m ago  |  Ends: 14d, 19h  |   0 Proposals
Dear developers, I am looking for engineer. Design an simple USB device - HID interface (and his firmware in language C) using components such as Maxim DS2465, DS28Exx, MAXQ1050 and MAXQ1010. It is extremely important that the professional has experience with at least one component of Maxim DEEPCOVER or security line components from another company (greater protection of intellectual property against reverse engineering, including physical and invasive tamper) . Please only Freelance who has experience with above requirements. If you have no experience, please do not bid. Serious bidders only !!! Doubts? Ask me.
Category: Other - Engineering &...       

r****mer
 [?]
Sign in to view client's details.
| r****mer
|    Brazil
Hourly Rate: $10 - $15 / hr   |  Duration: 3-4 weeks  |  Posted: 5h, 48m ago  |  Ends: 14d, 18h  |   1 Proposal
we are looking for engineer with experience of Ingenico terminals for repair, programming and maintenance. the position is short term and project based but it is on going position. more details will be provided in later stage. please forward your CV we contact you for further details.
Category: Other - Engineering &...       

g****bc2
 [?]
Sign in to view client's details.
| g****bc2 *
|    United Kingdom
Fixed Price: Less than $500   |  Posted: 5h, 54m ago  |  Ends: 14d, 18h  |   5 Proposals
Hello, I have a small project to model a relatively simple concept. Knowledge of loudspeaker mechanics is a plus. I need to model: A 3D Atmospheric (fluid) Dynamics Model for based on Intuitive Physics. The concept I have revolves around the design of a new speaker driver. If you're interested, what software might you use? Best, Soudy
Category: 3D Modelling       

s****han
 [?]
Sign in to view client's details.
| s****han
|    United States
Fixed Price: Not Sure   |  Posted: 5h, 57m ago  |  Ends: 14d, 18h  |   0 Proposals
Develop controls and commissioning specifications for 35,000 sqft museum HVAC project. Controls to be based on BACnet open protocol/Niagara. Systems include heating 100% OA air handling units, radiant floor, heating, split system A/C, boilers and pumps, exhaust fans and motorized relief dampers. Specs shall include point lists and Cx specs FPT templates for each system.
Category: Mechanical       
Skills: Mechanical Engineering       

M****ITE
 [?]
Sign in to view client's details.
| M****ITE
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: 5h, 58m ago  |  Ends: 14d, 18h  |   1 Proposal
Our new product will require: - Ability to track via GPS - Ability to track a 1 inch diameter "ring" shape, tracking device will need to be inserted in this ring - App that cant be logged into and tracked - website to be logged in to track - web design front end and back end - Require, initially 1000 models of this (max. $18 per model) - Require 50,000-200,000 per year (max. $14 per model) Budget of $1000 to $5000 Includes: - 3 year commitment and contract - 1 prototype full functional within 12 weeks - fully functioning website - fully functioning App - Design will be explained and detailed via email
Category: Product Design       

i****ays
 [?]
Sign in to view client's details.
| i****ays
|    Canada
Fixed Price: Less than $500   |  Posted: 6h, 40m ago  |  Ends: 2d, 17h  |   2 Proposals
I need ~5 Nordic 51822's pre-flashed with their soft device and overnighted to me ASAP. Some of these seem to be able to flash this chip:   [obscured]  /dataman-48pro2c-super-fast-universal-isp-programmer.html   [obscured]  /search/device-list/beeprog2c/ I will pay for all shipping costs, with a larger bonus the quicker this can happen.
Category: Electrical       
Skills: Electrical Engineering, Electronics       

T****rAv
 [?]
Sign in to view client's details.
| T****rAv
|    United States
Fixed Price: Less than $500   |  Posted: 7h, 7m ago  |  Ends: 1d, 16h  |   9 Proposals
I have a project that has been reasonably well documented in Revit 2015, however, needs schedules, details and final works done to get ready for construction. Simple 7 unit townhouse project. I have the Revit File and PDF of sample project (revit file of sample available for awarded company)
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoDesk Revit       

a****cts
 [?]
Sign in to view client's details.
| a****cts
|    Australia
Fixed Price: $500 - $1,000   |  Posted: 8h, 29m ago  |  Ends: 29d, 15h  |   14 Proposals
We need applicant who can design a custom multi stage gearbox, including sizing and design of gears, design of cast Shell, choice of bearings and sealing elements together with machining drawings. The gearbox consists of a main frame and a sub frame, subframe rotates around the main axis at rate of 10 rpm, there are two additional outputs; one at each end of the sub frame that rotates at a rate of 35 rpm. Input power 75kW. A video depicting the working principle is here   [obscured]  /watch?v=WOuuNJDmsr0 .
Category: Mechanical       

a****ati
 [?]
Sign in to view client's details.
| a****ati
|    Turkey
Fixed Price: Not Sure   |  Posted: 9h, 13m ago  |  Ends: 2d, 14h  |   2 Proposals
We need the bug fix on this COMSOL simulation for frequency range of 10 to 20 MHz and run at 14.5MHz for one simulation. Please quote on this job with running one to three simulation settings.   [obscured]  /s/jitrglim3apu5nj/piezo_saw_transient.mph?dl=0
Category: Other - Engineering &...       
Skills: COMSOL Multiphysics, COMSOL       

j****mit
 [?]
Sign in to view client's details.
| j****mit
|    Australia
Fixed Price: About $50   |  Posted: 9h, 16m ago  |  Ends: 2d, 14h  |   5 Proposals
Urgently required: Transpose basement plan hand drawn mark ups in to Acrobat Pro mark ups on unmarked copy of plan, using the same colours as in hand drawn plan key. All hand drawn comments are to be typed in capital letters inside Callout Tool boxes with the Callout Tool boxes placed around the perimeter of the floor plan, pointing to the area/s of interest. Key also to be typed and drawn using Acrobat Pro mark ups in the same position as in current hand drawn copy.
Category: Architecture       

R****tes
 [?]
Sign in to view client's details.
| R****tes
|    Australia
Fixed Price: $500 - $1,000   |  Posted: 9h, 22m ago  |  Ends: 14d, 14h  |   3 Proposals
Need a process & procedure to get pure ethanol from sugarcane juice at home I have a sugarcane juice crusher and sugar cane but i need pure ethanol for my backyard home factory.
Category: Chemical Engineering       

s****nov
 [?]
Sign in to view client's details.
| s****nov *
|    Kenya
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 9h, 34m ago  |  Ends: 14d, 14h  |   2 Proposals
We need a shelf or similar display system for greeting cards in our store. The display should be on a pillar near the cash desk. Simple Scandinavian design is a must. Dimensions of pillar, cards etc will be given along with photos of the area etc. Need a quick turnaround of 3 days maximum.
Category: Product Design       

D****ldt
 [?]
Sign in to view client's details.
| D****ldt
|    United Arab Emirates
Hourly Rate: Less than $10 / hr   |  Duration: 1-2 weeks  |  Posted: 10h, 25m ago  |  Ends: 14d, 13h  |   0 Proposals
The end customer has given us photographs and a broad understanding of the products manufactured in their works. The products need to be catalogued in the order of the industry they serve and brief descriptions need to be provided for each.
Category: Other - Engineering &...       
Skills: Chemical Engineering, Manufacturing       

d****ino
 [?]
Sign in to view client's details.
| d****ino
|    India
Fixed Price: $500 - $1,000   |  Posted: 10h, 44m ago  |  Ends: 14d, 13h  |   8 Proposals
i want to design a product which can help in hair fixing. Details can be explained on meeting or on telephone.
Category: Product Design       
Skills: SolidWorks, Product Design       

S****pS2
 [?]
Sign in to view client's details.
| S****pS2
|    Singapore
Hourly Rate: $20 - $30 / hr   |  Duration: 4-6 months  |  Posted: 12h, 14m ago  |  Ends: 25d, 9h  |   6 Proposals
Dear PCB Engineers, You are applying for a position wherein you will be required to document a.k.a write academic papers on the new PCBs and design techniques we use in our R&D lab on a day to day basis, IP rights shared between you and the company. Hence we will be scouting for engineering as well as English writing talents. Since we would like to have a taste of your abilities, after you send in your applications we will be sending you a research paper to selected candidates among the applicants, so that you may rephrase the content, add your insight and tell us something we don't know yet about the paper. Its an interesting job for people who are in love. Happy Applying.
Category: Electrical       
Skills: Electrical Engineering, Electronics, English       

s****tes
 [?]
Sign in to view client's details.
| s****tes
|    India
Fixed Price: Not Sure   |  Posted: 12h, 45m ago  |  Ends: 14d, 11h  |   33 Proposals
Create a dwg file from a drawing of a knife that I will furnish. This file will be used to waterjet cut the knife.
Category: CAD       
Skills: AutoCAD       

e****215
 [?]
Sign in to view client's details.
| e****215
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job