Save this Search
     
Sort by:
  • Posted Date
Time Left: Less than 24 hours
Fixed Price: Less than $500   |  Posted: Jun 18, 2015  |  Ends: 22h, 2m  |   20 Proposals
I have a product design prototype that needs editing to modify specs. You must be comfortable agreeing to a confidentiality statement for work for hire and have experience working in STL format as well as generating a 3D pdf for 2D viewing. The design prototype has already been rendered in STL but needs modification due to market feedback.
Category: Contract Manufacturing       

j****016
 [?]
Sign in to view client's details.
| j****016
|    United States
Fixed Price: Not Sure   |  Posted: Jun 18, 2015  |  Ends: 17h, 48m  |   7 Proposals
Hello ? We have a two phase project that requires an expert with a M2M device control over satellite experience/ background to design a detailed schematic to turn on/off existing simple piece of hardware (self-powered) as needed over a satellite constellation from a work station computer. This detailed schematic will need to show the end-to-end M2M solution and detailed diagrams of all components and their interaction. We will provide the simple schematic of the device that needs to be controlled/"power on/off" through an accessible wiring harness and/or inline power switch or micro-controller over and existing satellite constellation (Iridium/Inmarsat). The device is self-powered and has an existing tri-band antenna. (Avionics/Aerospace engineering background helpful but not necessary) Phase two is to build the prototype(s) and merge with said devices which can be used to demo to Avionics/Aerospace team on a desktop version or over Iridium SDK . We are receptive to h...
Category: Other - Engineering &...       
Preferred Location: North America, Western Europe, Eastern Europe, India/Southern Asia

T****oup
 [?]
Sign in to view client's details.
| T****oup
|    United States
Fixed Price: $500 - $1,000   |  Posted: Jun 18, 2015  |  Ends: 16h, 52m  |   12 Proposals
I want to build a top-of-the-line men's wet-shave set. This project would require a designer to build some or all the products contained in the set. The material should be highest quality with a combination of rustic and flashy materials. It will be aimed at men of some means. Here is a list of all items. 1)A small chest that is just large enough to neatly contain the following items: 2) Badger Shave Brush 3) Safety Razor and Razor refills 4) Straight Blade 5) Bowl 6) Shave Soap Tin 7) Stand for brush, razor, straight blade, and 8) Thin Master Shaver's Guide You are permitted to use pre-existing products that can be modified to fit my purposes and bear my company's label.
Category: Product Design       
Skills: Manufacturing       

B****eau
 [?]
Sign in to view client's details.
| B****eau
|    United States
Fixed Price: Not Sure   |  Posted: Jun 18, 2015  |  Ends: 16h, 46m  |   12 Proposals
Where planning on going to china in July. So we want someone can shows around to the factories and make samples we can look at. We'll be ordering in bulk. Specifically near and around hong kong region. Our company is interested in Major brand shoes Vans - Nike and LIDS hats. - Replica bike frames (Carbon fiber) Sworks bianchi trek etc. Carbon fiber rims - 88 mm - Aerospoke (5 spoke) - Carbon disc - trispoke Paintball - Mask -paintballs -gear Whole bike - Mountain bikes Selfie sticks We prefer to be able to meet in person once we arrive. Looking for sources that can give us prices that are manufacturing price not retail. Theres no point to import if the prices are the same as here.
Category: Other - Engineering &...       

S****Ceo
 [?]
Sign in to view client's details.
| S****Ceo
|    United States
Fixed Price: About $50   |  Posted: Jun 18, 2015  |  Ends: 16h, 17m  |   29 Proposals
We currently do materials takeoffs in-house and we are looking to outsource. Estimated time for takeoffs vary between 45 minutes to 2 hours. We are looking to pay $50 for each completed takeoff. Assignments would be ongoing. We have attached a completed Takeoff and corresponding Excel Spreedsheet to show what we need.
Category: Other - Engineering &...       

f****ati
 [?]
Sign in to view client's details.
| f****ati
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: Jun 18, 2015  |  Ends: 16h, 15m  |   7 Proposals
This is a project which is completed. I'm looking for some professional structure engineer to review the estimation and adapt it to the Australian codes and standards. I need someone who can show me that he/she is professional in Australian code and standards. We need this to be done ASAP Regards
Category: Civil & Structural       

s****e13
 [?]
Sign in to view client's details.
| s****e13
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: 7-9 months  |  Posted: Jun 18, 2015  |  Ends: 15h, 31m  |   17 Proposals
Need candidates proficient with ArcGIS to do processing of shape files and other tasks to help us clear out a backlog of map requests.
Category: Civil & Structural       

j****arr
 [?]
Sign in to view client's details.
| j****arr
|    United States
Fixed Price: Not Sure   |  Posted: Jun 18, 2015  |  Ends: 13h, 47m  |   2 Proposals
i am looking for an expert to help me with verilog firmware code implementing UDP comms. i have a verilog code to communicate with a controller but the communication keeps hanging up after 1000's of transmissions/operations
Category: Product Design       
Skills: Verilog / VHDL       

r****s13
 [?]
Sign in to view client's details.
| r****s13
|    United Kingdom
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: Jun 18, 2015  |  Ends: 12h, 19m  |   11 Proposals
Greeting, We need a new Chinese sourcing agent for factories and products. - Must have strong knowledge or LED industry Duties include: - Calling/emailing factories + our already existing factories/suppliers - Lead times - Quality Control ( LED Chips/ Drivers/ housing material etc etc. Be able to double check LED chip code + batch number with the LED chip manufacturer. - Visit Factories and meet/build business relationship with suppliers. We need someone who can work 5-6 days per week. This might only mean around a few hours of work in total each week. It depends on how busy our production schedule is. We need someone who is fast,reliable and can make things happen quickly in China. Please tell me why you are perfect for the job. LED understanding or have worked in the industry for some years is HIGHLY looked to be a successful employee.
Category: Electrical       

L****012
 [?]
Sign in to view client's details.
| L****012
|    Australia
Hourly Rate: $20 - $30 / hr   |  Duration: 1-2 weeks  |  Posted: Jun 18, 2015  |  Ends: 12h, 12m  |   21 Proposals
I'm a designer/Builder living in Austin Texas. I need help with Autodesk inventor, I imagine some of it might be tutorial, Some of it might be outputting designs for water jets and sheet metal folding. Ideally I'd like to doing an initial design in inventor and then outsource the final mechanical design to someone else. You can check out my works at: hartmoderndesign.com
Category: CAD       
Skills: 3D Modeling, Autodesk Inventor       

c****t97
 [?]
Sign in to view client's details.
| c****t97
|    United States
Fixed Price: Not Sure   |  Posted: Jun 18, 2015  |  Ends: 10h, 7m  |   5 Proposals
Maximum Power Point Tracking in Doubly Fed Induction Generator using Tip Speed Ratio Control algorithm The idea of this project is to make a simulation and evaluation for one of the MPPT algorithms during wind conversion process, which is Tip Speed Ratio Control algorithm. the type of the generator is vector control and the type of the converter is back to back (AC-AC). the parameters of both generator and wind turbine are given in the attached files in "Parameter. Pdf" the simulation must be performed in MATLAB simulator (code or Simulink ) A report that discusses the mathematics equation of the model and discussion for the obtained results are also required.
Category: Electrical       
Skills: Electrical Engineering, Simulink       

m****lab
 [?]
Sign in to view client's details.
| m****lab
|    Jordan
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 18, 2015  |  Ends: 7h, 5m  |   7 Proposals
I need someone who can solder my components on my printed PCB boards and code and programme u-controller. I have soldered one side of one PCB board so far, but it has to be soldered double side and need 5 PCB boards to be soldered. I will provide some components but a few components need to be purchased on your hand or use what you have in your stock. I would encourage the freelancers in European region to apply as I need a fast turnaround.
Category: Electrical       
Skills: Embedded System       

s****414
 [?]
Sign in to view client's details.
| s****414
|    Switzerland
Fixed Price: Less than $500   |  Posted: Jun 18, 2015  |  Ends: 4h, 26m  |   2 Proposals
Necesito diseñador industrial que realice mobiliario modular para tiendas. Que los muebles sirvan para tienda de ropa, para calzado, perfumería..... Que sea modulable, que una tienda de 20 m2 y otra de 60 m2 tengan el número de muebles de la de 20 m2 x 3. Ejemplo: una tienda lleva 5 tableros de cremallera de 1 metro y otra 8,5 tableros, lo ideal es que los tableros de 1 metro de ancho y de 0,50 para qué sirva para todo tipo de tiendas. También una lleva un mostrador de 2 metros y otra de 3 metros, pues los mostradores deben ser modulable si de 1 metro. Es decir que según sea el tamaño se pueda ir sumando por módulos.
Category: Product Design       

y****der
 [?]
Sign in to view client's details.
| y****der
|    Spain
Fixed Price: Less than $500   |  Posted: Jun 18, 2015  |  Ends: 4h, 10m  |   5 Proposals
Hello Electrical engineer required who experts in AC-DC converter. charger power supplies, winder turbines, generators, transformers ready to hire today.
Category: Electrical       

E****ido
 [?]
Sign in to view client's details.
| E****ido *
|    Pakistan
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 03, 2015  |  Ends: 20h, 26m  |   10 Proposals
Familiar MSP430 series or similar firmware development. Understand and can develop firmware update system Familiar with blue tooth low energy (BLE) firmware design.
Category: Electrical       
Preferred Location: United States

G****Pal
 [?]
Sign in to view client's details.
| G****Pal
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 03, 2015  |  Ends: 17h, 8m  |   9 Proposals
We need one inventive engineer well-versed in solar technology who can take our ideas and add the solar components needed to energize them. These products are geared for general public, mostly farm-related and small but essential items. Compensation is part ownership in patent. We will be using crowd funding to finance the prototype. Our company will provide design, marketing, fund-raising, publicity and direction.
Category: Electrical       

C****ksU
 [?]
Sign in to view client's details.
| C****ksU
|    United States
Fixed Price: Less than $500   |  Posted: Jun 03, 2015  |  Ends: 16h, 7m  |   7 Proposals
We are looking for a person with a high level of knowledge and relevant practical experience to create 50 questions for Plumbing The test must contain 3 types of questions (simple choice, multiple choices, true/false) allocated among 4 skill levels (beginner, intermediate, advanced, expert) and organized among several task-based subtopics. Thank you for your interest!
Category: Other - Engineering &...       
Skills: Plumbing       

o****bal
 [?]
Sign in to view client's details.
| o****bal
|    Canada
Fixed Price: Not Sure   |  Posted: Jun 03, 2015  |  Ends: 10h, 45m  |   3 Proposals
Xylitol product formulation/recipe Line of products aimed at children with xylitol as the only sweetening agent as point of difference. This product is not aimed to be a medicine, but rather food product or enriched food product as defined in European Union.  At this moment we are looking for a specialist to create product formulation/recipe in a few product categories to create healthier alternative for current confectionery products. The line of products consist of winegum, lollypop, soft fruity chew (soluble chewing gum like Maoam). Specific requirements are as described below: Winegum - sweetened only with xylitol, all natural (as much as possible) enriched with some vitamin (or superfruit containing vitamin such as acerola). At the beginning one flavour - strawberry. Lollypop - small dimension with natural colourings. Sweetened only with xylitol, all natural (as much as possible) enriched with some vitamin (or superfruit containing vitamin such as acerola). At the beginning o...
Category: Other - Engineering &...       
Preferred Location: Western Europe, Eastern Europe

A****m_Z
 [?]
Sign in to view client's details.
| A****m_Z
|    Italy
Fixed Price: Less than $500   |  Posted: Jun 03, 2015  |  Ends: 7h, 53m  |   7 Proposals
Hello, i need to filter a mix signal with a digital filter and display the filtered signal on a glcd or tft. The signal contains 50Hz base signal and its harmonics. Plus a fault signal just below 50Hz so all frequency included 50Hz must be gone but a fault signal. Output signal will be written through adc and displayed. I do have a arduino due board which has ADC and DAC moduls on board. Can you design and port it for arduino due?
Category: Electrical       

o****779
 [?]
Sign in to view client's details.
| o****779
|    Turkey
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 04, 2015  |  Ends: 5h, 3m  |   25 Proposals
Hi, I am seeking someone who has experience in electrical engineering. The work requirements will be sent. Thank you.
Category: Electrical       

d****zzt
 [?]
Sign in to view client's details.
| d****zzt
|    Israel
Fixed Price: Not Sure   |  Posted: Apr 04, 2015  |  Ends: 23h, 46m  |   7 Proposals
I would like to know if it's technically viable to create the prototype. Detailed diagrams, illustrations, and/or media are needed to demonstrate this invention can work in it's actual environment. Job Requirements: 1. Certified Electrical Engineer 2. Experience in designing prototypes with screen technology and multi-touch peripherals 3. Possibly use currently available components for construction 3. Sign a Non-Disclosure Agreement 4. Pay expectation for completing this Fixed-Priced Job
Category: Product Design       

R****rks
 [?]
Sign in to view client's details.
| R****rks
|    Taiwan
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job