Save this Search
     
Sort by:
  • Posted Date
Fixed Price: Less than $500   |  Posted: Feb 27, 2015  |  Ends: 13h, 33m  |   5 Proposals
I need some data analysed regarding petroleum technology. the task involves a recently launched taskforce to venture into a newly discovered oil reservior. i can send the data, but due to the sensitive nature of this project, this will only be sent to the hired freelancer.
Category: Other - Engineering &...       

S****ays
 [?]
Sign in to view client's details.
| S****ays
|    Kenya
Fixed Price: $20 - $100   |  Posted: Feb 26, 2015  |  Ends: 16h, 5m  |   12 Proposals
I have a model that needs the site added. Also two design options need to be added. So I am looking for a talented designer that needs little direction. If you think you can do the job, please state your qualifications for producing designs. It is a simple community center with an emphasis on the design being the entrance with curtain walls. It is important that you pay attention to details for this model since it will be rendered. So site corners should be curved, add metal parapets, etc. Project is due saturday morning with periodic updates throughout. Must use either sketchup or Revit 14+ (let me know which one you want to use) I will provide the floor plan as well as site plan and current 3d model.
Category: 3D Modelling       
Skills: Architecture, AutoDesk Revit, SketchUp       

d****mek
 [?]
Sign in to view client's details.
| d****mek
|    United States
Fixed Price: Less than $500   |  Posted: Feb 26, 2015  |  Ends: 5h, 54m  |   12 Proposals
This is a basic design for what will essentially house a printed circuit board. The important part is making this look good as it will be in high traffic areas. I'm open to design ideas, so use your creativity. The attached files (v2 / v3) contain other concepts that incorporate translucent acrylic or similar that allows LED lighting to illuminate it. Minimum Requirements: - Plastic design (white) that is square - Very strong low profile magnets on the back - Accommodate two AA batteries - 10mm LED (mvp_sketch.png) - Dimensions: 2.25in x 2.25in x 1in
Category: 3D Modelling       
Skills: 3D Modeling, AutoCAD, 3D Printing, 3D Design       

b****gan
 [?]
Sign in to view client's details.
| b****gan
|    United States
Hourly Rate: $12 - $23 / hr   |  Duration: Not Sure  |  Posted: Feb 19, 2015  |  Ends: 13h, 11m  |   1 Proposal
Hello, and thanks for viewing my posting. My company is using the service "Unbounce" to capture leads, and we need to post these leads to our Microsoft Dynamics CRM in real time. Currently we can only receive them via email. There are two options to succesfully do this, which are a little beyond my coding knowledge: 1. Unbounce offers a "webhook" integration, that can post the leads to any URL you provide. We tried this and couldn't get it to work. 2. Forward the leads that are currently coming to our email, and post them to the CRM. Again, this job is to take our leads that include name, phone, and email and have them automatically post to our CRM (dynamics). If you are not familiar with dynamics and couldn't provide the fix in a day please do not apply. Thank you!
Category: Product Design       

v****ebe
 [?]
Sign in to view client's details.
| v****ebe
|    India
Fixed Price: $500 - $1,000   |  Posted: Feb 14, 2015  |  Ends: 18h, 58m  |   56 Proposals
I have 50 models of residential houses done in Google Sketchup with a decent amount of detail. I need a high quality visual from the front of the property for each model that will be put onto a new website so high resolution images are key.The selected candidate will have an option to have free advertising on the website as well. This will be the first stage of the project and more models and visuals will be needed in the future Please attach portfolio work to your job proposal.
Category: 3D Modelling       
Skills: 3D, 3D Design, 3D Rendering       

J****HLE
 [?]
Sign in to view client's details.
| J****HLE
|    United Kingdom
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Feb 14, 2015  |  Ends: 17h, 39m  |   2 Proposals
Hi - we need some help with customizing our DLP projection to fit our needs and want to hear ideas from someone well versed in the field. Must be familiar with the light engines, PCB drivers, as well as with general optics (i.e. different lens, mirrors). Actual experience in the field needed for this consult. 1- NDA required. 2- Quick 10 minute call on skype needed before we award the job. We'll quickly outline the problem and you can tell us how many hours you think it'll take approximately. Thank you
Category: Other - Engineering &...       

r****lar
 [?]
Sign in to view client's details.
| r****lar
|    United States
Hourly Rate: $20 - $30 / hr   |  Duration: Not Sure  |  Posted: Feb 14, 2015  |  Ends: 17h, 38m  |   13 Proposals
I have an offroad aftermarket product that I am in the process of patenting. I am self-taugh in solidworks and auto-cad and my capabilities are limited. Im looking for someone to create patent drawings for my attorney. May need other design help along the way. Looking for someone locally to San Jose Bay Area. Any automotive manufacturing experience is ideal. Sorry for the rushed email. I like your portfolio i would to discuss more with you. below is an email i have sent to other applicants as well. My name is Joe. There are two of us within our business that design, Wes is the other. I primarily come up with the designs And have the "vision" of what I want to create. I would like to know more about you? Where are you located? Previous and current employers? What software do you use primarily? We would like to keep everything in solidworks. We currently have many assemblies some need revisions an small changes. looking forward to hearing back from you.
Category: Other - Engineering &...       

i****smw
 [?]
Sign in to view client's details.
| i****smw
|    United States
Fixed Price: Not Sure   |  Posted: Feb 14, 2015  |  Ends: 15h, 58m  |   20 Proposals
One of our clients has an idea for a new product. It is a plastic dispenser apparatus with a timer. It is for outdoor use. The client has created a pencil drawing of the concept but they need help getting it to market. Elance to the rescue! Elance service providers are very talented and we have seen hundreds of projects successfully completed. Now we will try mechanical engineering. What we need is for an expert mechanical engineer to step in a guide the client through the process of developing the product and preparing it, including the necessary drawings, for manufacture. The goal is to produce a high-quality product that will also be as inexpensive to manufacture as possible. Along with your bid, please outline exactly how you plan to assist our client in this endeavor and how long you think the process might take. Also please provide examples of similar projects you have completed in the past. Note: We will provide the client's drawing to the bidders we feel most comfortable with u...
Category: Other - Engineering &...       

l****rad
 [?]
Sign in to view client's details.
| l****rad
|    United States
Fixed Price: Not Sure   |  Posted: Feb 14, 2015  |  Ends: 14h, 49m  |   25 Proposals
Hello and thanks for your interest in our project. We are looking to have a small retail space in a few key cities in the United States. We are looking for a very skilled expert in interiors to create a mock up of the look that we're going for. Ideally, we'd like for the winning bidder for this project to offer us an 'estimate' on how much space will be needed to complete. The retail space will consist of the following: ? sales floor (that will include a front desk, vanity mirror + stools, an ottoman in the center of the space) ? small storage space (separate room) for inventory (we are selling hair products) ? small office for management We're thinking that the space wouldn't be more than about 1500-2500 SF total but again, we're open to estimates. This is NOT a huge department store space. This is literally a small space like one you'd see at a strip mall.
Category: 3D Modelling       
Skills: 3D, 3D Modeling, AutoCAD, Sales, 3D Design       

k****p80
 [?]
Sign in to view client's details.
| k****p80
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Feb 14, 2015  |  Ends: 14h, 21m  |   2 Proposals
Buna, Scuze de deranj, ajuta ma te rog cu un sfat. Am terminat recent facultatea de constructii si datorita unor probleme medicale sant nevoit sa i ajut pe ai mei acasa. Fiindca n as vrea sa treaca timpul fara sa fac nimic productiv mi-am facut un cont pe Elance si pe freelancer. N-am reusit inca sa prind nici un proiect -oricum am inteles de pe forumuri ca inceputurile sant cele mai grele la proiectele online. Te rog sa ma ajuti si sa mi spui tu ce ai face in locul meu. Mentionez ca am cunostiinte bune de Autocad 2d si 3d si cunosc germana si engleza (am mai incercat sa prind si ceva traduceri dar nimic) Multumesc pentru ajutor.
Category: 3D Modelling       
Skills: 3D, AutoCAD, .NET Compact Framework       

e****aul
 [?]
Sign in to view client's details.
| e****aul
|    Romania
Fixed Price: Less than $500   |  Posted: Feb 14, 2015  |  Ends: 14h, 14m  |   0 Proposals
Button in Notificiation Area so that on the click of that button the following can happen: 2. Choose one of the monitors to take a full screen shot of the chosen monitor 3. Open the screen shot taken in a new window/form that has the following editing/ annotation capability: add text box, arrow, elipse/circle and rectangle. All of these must be resizable and movable on the image. 3. Dropdown menu in editor that has the ability to select from a list of names to place in the filed name of the newly created screenshot file name. Ideally, I would like to get this list of names from a table through an ODBC connection. However, just being able to load this list of names from a text file on the desktop would be sufficient at this time. 4. Save Annotated image to desktop as a file that contains a date created, username (from NT credentials), and selected name from the ODBC or test file.
Category: Other - Engineering &...       
Skills: Python, VB.NET, IronPython       

j****ile
 [?]
Sign in to view client's details.
| j****ile
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Feb 14, 2015  |  Ends: 12h, 23m  |   2 Proposals
Hi, we have a framecad machine we need do bullied a labor houses with framecad pro and the frame cad detailer,
Category: Civil & Structural       

I****nbe
 [?]
Sign in to view client's details.
| I****nbe
|    Kuwait
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Feb 14, 2015  |  Ends: 12h, 10m  |   4 Proposals
The CatTop(TM) is a device that would serve as a decoy device for your cat. Resembling a laptop, it would lure the cat to lie on top of it, giving you free access to your own laptop. I need a prototype of this device. Requirements are as follows: 1. The device shall contain the shell and resemblance of a standard laptop. It must have a hinge that opens and closes. (Note: this should not be the shell of an existing laptop) 2. The "keyboard" will serve as a heating pad, emitting warmth when the device is plugged in. 3. The power source for the device can be via wall outlet or USB. 4. The "monitor" shall consist of a sticker displaying a cat-friendly image. 5. Nice to have: 'Meow' noises that emit from the device when pressure is applied to the keyboard. Services required: 1. Parts 2. Labor 2. Shipping prototype when complete
Category: Product Design       
Skills: Product Development       

n****lla
 [?]
Sign in to view client's details.
| n****lla
|    United States
Fixed Price: Less than $500   |  Posted: Feb 14, 2015  |  Ends: 12h, 6m  |   34 Proposals
We need someone to modify an existing .STEP file by changing the wall thickness of one part, and adding in a small 'handle' on another area. Then supply 3D PDF renders and the updated STEP along with PDF design CADS.
Category: Product Design       

P****neo
 [?]
Sign in to view client's details.
| P****neo
|    United States
Fixed Price: Less than $500   |  Posted: Feb 14, 2015  |  Ends: 11h, 53m  |   4 Proposals
We are looking for someone who knows the difference between the Manufacturing requirements for an FDA listed product vs an FDA class 2 product, and all the certification and documentation requirements. We are going through the process of setting up a new manufacturing facility in Texas to continue manufacture of existing products (previously manufactured by another company). We need to ensure the new facility meets all the necessary certification requirements. We utilize a factory in China, so you will need to be familiar with all the certification requirements both for our OEM factory in China, and our Texas facility. This first phase is to simply create a detailed list of requirements for us. We will then determine what parts we have the skills for inhouse, then work with you through any areas we require further external expertise. This quote is solely for the first phase of the project where after a quick conversation it is expected you will be able to understand our current pos...
Category: Other - Engineering &...       
Skills: Manufacturing Design, FDA, ISO 13485       
Preferred Location: United States

P****neo
 [?]
Sign in to view client's details.
| P****neo
|    United States
Hourly Rate: Less than $10 / hr   |  Duration: 1-2 weeks  |  Posted: Feb 14, 2015  |  Ends: 11h, 21m  |   27 Proposals
we need someone who is familiar with injection moulding or 3D printing the part is a small round cap. it is 3 cm high and 4 cm wide. First we need a 3D designer who can do a drawing for the injection mold / 3d printing. If we go with injection moulding we need a mold maker and a someone who can then manufacture it. If we go 3D printing we need only the designer and someone who is familiar with 3D printing.
Category: 3D Modelling       

7****ord
 [?]
Sign in to view client's details.
| 7****ord
|    United States
Hourly Rate: Not Sure   |  Duration: 3-4 weeks  |  Posted: Feb 14, 2015  |  Ends: 8h, 7m  |   5 Proposals
It involves the design of a tray dryer for micron particles. The moisture transport in the micronparticles should be addressed to know the maximum % of organic moisture content can be removed. The design involves the construction & maintenance of the tray dryer. The heat energy from exhaust gas out of the dryer is recovered using a heat exchanger. The heat exchanger should be designs to meet specific requirements which would be provided. The output waste gas is then passed through a scrubber to be scrubbed with water, to reduce concentration of CO2 which has to be designed to. Excel should be used for the calculations, Autocad should be used for the mechanical drawing. Additional information of the input & output data will be provided. Previous experience on dryer/calciner would be an advantage. The project should be completed before March 7th. For you to be considered for the project, I'll need the subtopics that would be covered in this design. With this, I can cho...
Category: Chemical Engineering       

k****yhg
 [?]
Sign in to view client's details.
| k****yhg
|    United Kingdom
Fixed Price: Less than $500   |  Posted: Feb 14, 2015  |  Ends: 5h, 21m  |   0 Proposals
I have some firmware code in silab 8051 controller for apple authentication chip 2.0version B. I would like to rewrite it for 2.0c version which has different protocol . This is a fast track project and we would like to do it less than 10 days. Required experience Firmware engineer for this project.
Category: Product Design       

j****003
 [?]
Sign in to view client's details.
| j****003
|    India
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Feb 14, 2015  |  Ends: 4h, 17m  |   7 Proposals
Hello I am looking for an expert engineer/designer who can help me create a product for people who enjoy playing golf, who carry their golf clubs, but suffer from back pain. The idea is to create a product that will allow for pain-free carrying of heavy golf bags. Please submit details on your background and information on how you would take on this design project.
Category: Product Design       

n****007
 [?]
Sign in to view client's details.
| n****007
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jan 30, 2015  |  Ends: 18h, 20m  |   8 Proposals
Mate the given schematic with a suitable microcontroller and design and fabricate the sample PCB. Also some C programming will be required. Detail Scope of work 1. Establish the I2C communication between provided IC of schematic and chosen microcontroller. 2. Establish communication between microcontroller and PC via USB. 3. Microcontroller should also be field programmable via USB. 4. Write a basic C program for microcontroller which can access the IC via I2C. 5. Write a basic PC program to access all the registers in the IC and some variables of the microcontroller. 6. Design the PCB and get 2 sample units fabricated for testing.
Category: Electrical       
Skills: Integrated Circuits, Electronics, PCB Design       
Preferred Location: India/Southern Asia

p****n86
 [?]
Sign in to view client's details.
| p****n86
|    India
Fixed Price: $500 - $1,000   |  Posted: Jan 30, 2015  |  Ends: 14h, 38m  |   9 Proposals
part-time job; draw graphic by ourside requirement. need imagination; impact designs; we will provide some artworks for your refference. Main product is soccer ball , volleyballs. designers also can refference corresponsible product by internet
Category: Product Design       
Skills: CorelDraw, Adobe Illustrator, Drawing, 3D Design       

l****gyu
 [?]
Sign in to view client's details.
| l****gyu
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Dec 31, 2014  |  Ends: 6h, 32m  |   3 Proposals
Require a provider with knowledge in agriculture. Areas of experience could be: - Landscape Design - Green Roofs - Vertical Farming - Commercial Filtration - Horticulture. - Building integrated agriculture I am planning a business strategy for the fields listed above and have an overall plan and technical understanding of building dynamics, filtration and plant engineering. Require a provider to become involved in the planning and implementation of a business offer. This will become a long term requirement for the right provider. To be considered please provide details or case examples of work in the above mentioned fields.
Category: Mechanical       
Skills: Chemical Engineering, filtration       

u****fc
 [?]
Sign in to view client's details.
| u****fc
|    United Kingdom
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job