Save this Search
     
Sort by:
  • Posted Date
Hiring Open
Fixed Price: $1,000 - $5,000   |  Posted: Aug 04, 2015  |  Ends: 20h, 7m  |   6 Proposals
smart hump on the roads ,,our company based in singapore and we are seeking a freelancer 3D designer and animator to develop virtual reality road with vehicles moving showing our smart Humps installed in the roads we prefer if the freelancer have better understanding for our need , but this can be overcome thru Skype ..and produce 2-3 Mins video animation for sales and marketing purposes ,,the quality of the work should be high with musical background we expect and looking forward the content of animation includs follows footage here attached power point file can tell the video script 1- Vehicles moving on roads with shots close to housing windows lighting and also road lamps and traffic lights ( need city center environement , where crowded roads with vehicles , checkpoint , shipyard , car parkings gantries in/out , warehousing gates with heavy trucks ) 2- we need to show close up camera to the wheel and the smart hump to show how is works 3- we need to show how the hump instal...
Category: 3D Modelling       
Skills: 3D, 3d Animation       

I****015
 [?]
Sign in to view client's details.
| I****015
|    Singapore
Fixed Price: Less than $500   |  Posted: Jul 30, 2015  |  Ends: 23h, 8m  |   18 Proposals
I need CAD drawings similar to the pipe/tubing of the attached image. I will supply the dimensions the curves will be left to you. I have the frame/chassis of the car and will give you the dimensions to work with the pipe/tubing. I will also spec the pipe OD and ID. Joints are to be welded and will be affixed to the car with clamp, nuts and bolts. $200.00 USD is too much for this job. Supplier must be able to communicate in English over the phone.
Category: CAD       
Skills: AutoCAD, AutoCAD 2012       

R****uma
 [?]
Sign in to view client's details.
| R****uma
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 29, 2015  |  Ends: 11h, 34m  |   37 Proposals
I'm looking to have 3 different small boards laid out so they can be printed / assembled, and later mass produced. I have most the details, and they are small and simple boards (capacitive touch chips that run LEDs) approximately 10-30 components. Will need a little help revers engineering a board I already have. Thanks, Mark Johnson
Category: Electrical       
Skills: PCB Design, Circuit Design       

E****Art
 [?]
Sign in to view client's details.
| E****Art
|    United States
Fixed Price: Not Sure   |  Posted: Jul 22, 2015  |  Ends: 22h, 49m  |   10 Proposals
I need someone to do cad drawings and design an inhabitable box for one person to live in for a few days, for a marketing stunt. The dimensions should be in the metric system. The proposed dimensions are 2.5 (H) x 3 (L) x 3 (W) meters. Also, the box should be on a platform of stairs. We are envisioning the box to be made of plexiglass and stainless steel with the platform being made out of wood. It is extremely important that the box is completely clear and easy for people to see into. The box should be air conditioned with good ventilation.There must be a door to get in and out of the box. There should also be a smaller 75x75 centimeter window where necessities can be easily transferred into the box. The box should be designed in such a way that is will not be classified as a building structure (which has to be signed off by a structural engineer). Instead, it should be an apparatus/decoration. It should resemble the attached picture.
Category: Architecture       

M****ick
 [?]
Sign in to view client's details.
| M****ick
Hourly Rate: Less than $10 / hr   |  Duration: 1-2 weeks  |  Posted: Jul 22, 2015  |  Ends: 20h, 56m  |   7 Proposals
its a job about transmission lines and prefer to the light and power its depends on power generating and distributed with logical area around city
Category: Electrical       

D****v98
 [?]
Sign in to view client's details.
| D****v98
|    India
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 22, 2015  |  Ends: 20h, 43m  |   9 Proposals
We are looking for oil and gas electrical, instrumentation, mechanical, structural, sub sea and operations writers and or instructors. You will be required to create outlines and then content for a range of courses ranging from oil and gas offshore platforms to refineries in topics from E&I Facilities Engineering to undersea engineering. Please clearly indicate your experience and ability to write and or instruct competently. You must be a qualified engineer with relevant experience. Topics include ? Process Safety Fundamentals ? Introduction to Oil and Gas Production Facilities ? I&C Fundamentals ? HAZOP ? LOPA ? Heat Transfer & Separation ? Pressure Relief Design ? Flow Assurance $20-$25 AUD Per Hour for writing work. Instructing fees TBA.
Category: Other - Engineering &...       
Skills: Technical Writing       

S****kay
 [?]
Sign in to view client's details.
| S****kay
|    Australia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 22, 2015  |  Ends: 20h, 11m  |   55 Proposals
Hi I'm Glen. I have a timber decking business in Australia (see justdeck.com.au) This job will be a longterm position for the right candidate and comes in two parts: Part 1 - I'm looking for someone who can turn my hand drawn sketches and site photos in realistic, life-like 3D models that I can email to prospective clients as part of my project proposal. Part 2 - once we have been awarded a decking construction project I will need a set of construction plans. These will include: floor plan, elevations, joist and bearer layout All plans and 3D models will need to emailed as PDF's I will need each new job completed and returned to me ready to submit to my prospective clients within 48hrs, no later Please see attachments for examples of the images you'll receive from myself. Each job will also come with a detailed written description.
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

a****ing
 [?]
Sign in to view client's details.
| a****ing
|    Australia
Hourly Rate: $30 - $40 / hr   |  Duration: 1-3 months  |  Posted: Jul 22, 2015  |  Ends: 18h, 57m  |   38 Proposals
We are building a new constructed home and need full service plans I have provided some plans and pictures of what I want the home to look like and layout you can find the pictures attached. I am looking for someone to draw up the blue prints for a house and any other sketches I might need if you have any questions please feel free to ask me anything. I want with all of the measurements and there will only be a small amount of changes. Here is the link of the home I want you can also find pictures attached as well I would like to make some minor adjustments to the design the front of the house.   [obscured]  /realestateandhomes-detail/720-Jefferson-St-NW_Washington_DC_20011_M59012-23997   [obscured]  /DC/Washington/720-Jefferson-St-NW-20011/home/40387764
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

K****030
 [?]
Sign in to view client's details.
| K****030
|    United States
Hourly Rate: More than $50 / hr   |  Duration: 4-6 months  |  Posted: Jul 21, 2015  |  Ends: 16h, 49m  |   27 Proposals
Looking for experienced product engineering (mechanical) specialist with proven experience in taking an existing working prototype to become production ready. The right candidate would work with an award-winning industrial design individual who has already been selected. Ideally the candidate will be located in Chicago. The prototype is fully functional, being tested by a professional testing company, but now needs the collaboration between engineer and designer to be completed. Compensation will be competitive with attractive bonuses. The successful candidate must be prepared to start immediately (part-time) and full-time within a month. We anticipate the entire project to last four-six months.
Category: Product Design       
Skills: SolidWorks, 3D Printing, Physics       

a****eas
 [?]
Sign in to view client's details.
| a****eas
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 21, 2015  |  Ends: 16h, 35m  |   24 Proposals
We have existing PLC ladder diagrams that need to be changed and edited. We have the drawings in AutoCAD format.
Category: Electrical       
Skills: AutoCAD       

T****ces
 [?]
Sign in to view client's details.
| T****ces
|    United States
Fixed Price: Not Sure   |  Posted: Jul 21, 2015  |  Ends: 16h, 21m  |   13 Proposals
Seeking some one who owns a 3d printer to print out 3d furniture models. We will provide the artwork design. Please educate us on the process and what you will need? Please attach samples
Category: Product Design       
Skills: Computer Engineering, 3D Printing       

d****dia
 [?]
Sign in to view client's details.
| d****dia
|    United States
Fixed Price: $500 - $1,000   |  Posted: Jul 21, 2015  |  Ends: 13h, 38m  |   3 Proposals
I need an expert in optics to design and perhaps build a video display that would be fit in sunglasses and not strain the user. The job is very open and the worker is expected to provide innovation as this probably has not been done before. Some ideas that could be implemented are holographic waveguides, nano-pixels, or oleds. Challenges include: -Not blinding the user. -Creating a focus-able object very close to human eyes -Must be able to connect to a streaming circuit. -Must be reproducible (teach to manufacturers, pictures and drawings along the way) All parts will be bought by me. Final product will be shipped to me at the end and the shipping will be paid by me. If final product is patentable the creator may co-patent with me. If the project is a success, creator will be asked to join the company.
Category: Product Design       

K****h10
 [?]
Sign in to view client's details.
| K****h10
|    United States
Fixed Price: Not Sure   |  Posted: Jul 21, 2015  |  Ends: 13h, 12m  |   48 Proposals
I am looking for someone to draw up the blue prints for a house. I have the blue prints of the home that I want with all of the measurements and there will only be a small amount of changes. Total living will be 3060 ft2 Total Slab will be 4176 ft2
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

T****TAT
 [?]
Sign in to view client's details.
| T****TAT
|    United States
Hourly Rate: Less than $10 / hr   |  Duration: 1-2 weeks  |  Posted: Jul 21, 2015  |  Ends: 12h, 14m  |   7 Proposals
2-5 years experience with 3D content development using 3D Studio Max. Knowledge of Adobe After Effects for applying post effects to 3D rendered videos is a plus
Category: 3D Modelling       
Skills: 3D       

p****cko
 [?]
Sign in to view client's details.
| p****cko
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 21, 2015  |  Ends: 11h, 29m  |   11 Proposals
Process engineering calculations are required for the addition of a heat exchanger to a vessel. The fluid will be pumped out of the vessel, through the exchanger, and back into the vessel, in order to cool the fluid with process water. There are three vessels that require a heat exchanger addition.
Category: Other - Engineering &...       

F****RIL
 [?]
Sign in to view client's details.
| F****RIL
|    Canada
Fixed Price: Not Sure   |  Posted: Jul 21, 2015  |  Ends: 11h, 10m  |   13 Proposals
I know what I want and even have a proto type. I need some design work to market the product. It is mostly mechanical work with a 12vt switch and small pump. Thank you Dave O
Category: Other - Engineering &...       

D****ave
 [?]
Sign in to view client's details.
| D****ave
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 21, 2015  |  Ends: 10h, 38m  |   13 Proposals
Im a developer / builder working on infill spec and pre-sell new construction single family houses in Atlanta GA. I'm looking for an Architiect that can take my drawings from a 80%-90% level to fully complete and ready for permit. We would need an architect's stamp so the designer needs to be registered in the state of Georgia. The majority would be copying exactly what we have drawn in-house on our program, Chief Architect but we also usually need input on specific design or aesthetic conflicts that may come up. We need someone who can turn around the drawings fairly quickly (1 to 2 weeks).
Category: Architecture       
Preferred Location: United States

c****KBD
 [?]
Sign in to view client's details.
| c****KBD
|    United States
Fixed Price: Not Sure   |  Posted: Jul 21, 2015  |  Ends: 10h, 33m  |   29 Proposals
Hello, I am in need of a professional who has extensive experience in CAD designing for prototypes. I am looking to take an idea of an ordinary 1 Gallon Milk jug/ water jug, but redesign it with key features. this will be a product in full production runs. I will provide greater detail to the person I work with on this job.
Category: Product Design       

j****rde
 [?]
Sign in to view client's details.
| j****rde
|    United States
Fixed Price: Not Sure   |  Posted: Jul 21, 2015  |  Ends: 10h, 30m  |   23 Proposals
Trying to get something printed using   [obscured]  /3dprintlab/instance/5e359c07-2147-4e13-ba51-93288f83f45e We have the item we want 3d printed in a DWG file but need it converted to a .3ds for materialise.com
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

r****r10
 [?]
Sign in to view client's details.
| r****r10
|    United States
Fixed Price: Less than $500   |  Posted: Jul 21, 2015  |  Ends: 10h, 29m  |   16 Proposals
I have a device a patented device that I need built in order to show to marketing companies. The device is to be made out of stainless steel (powdered finish and metallic dusted finish). The length will need to be around 9-12 inches long and roughly 2-3 inches wide. I have a drawing of what I am looking for, please contact me. Must agree to an NDA
Category: CAD       
Skills: 3D Modeling, AutoCAD, CAD/AutoCAD       

l****ino
 [?]
Sign in to view client's details.
| l****ino
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 21, 2015  |  Ends: 10h, 27m  |   6 Proposals
I need to design a self standing walking cane with a retractable grabber system. The grabber is concealed in the center bottom of the cane and deploys from the center bottom. A lever on the handle allows pinches the grabber. The grabber retracts into the center. Maybe it retracts by pressing it down into the floor and deploys by pressing the lever or a trigger. See pictures.
Category: Other - Engineering &...       

t****962
 [?]
Sign in to view client's details.
| t****962
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: 1-2 weeks  |  Posted: Jul 21, 2015  |  Ends: 10h, 4m  |   5 Proposals
Hi. I noticed you performed a few jobs using QGIS. I am interested in creating an initial map of a small US city. In the map I need to represent its school district boundaries and overlay that with custom schools zones determined by a student's local school identification. If the initial map works I will offer additional work to add other layers to the base map.
Category: Other - Engineering &...       

r****eto
 [?]
Sign in to view client's details.
| r****eto
|    United States
Fixed Price: Less than $500   |  Posted: Jul 21, 2015  |  Ends: 9h, 30m  |   4 Proposals
I am the sales director for an Industrial Wall Mount Air Conditioning Company. We manufacture units for oil rigs and such. We are looking to update our company logo to something more modern. I would like to use the logo and colors as a base for the brochure. The logo will also be placed on the air conditioners (currently the units have no company logo on them. The company is Maverick Enterprises and we currently use a horse as our logo. Would love to make the horse more of a "maverick" while using the company name or a simple "M" Open to all colors. I will provide pictures and such. Needs to be in Adobe In Design so I can modify at a later time.
Category: Other - Engineering &...       
Preferred Location: North America

b****ux1
 [?]
Sign in to view client's details.
| b****ux1
|    United States
Fixed Price: Less than $500   |  Posted: Jul 21, 2015  |  Ends: 9h, 21m  |   22 Proposals
I would like to get 3D renderings for the house we're going to be building. The plans are being completed currently. Once they are finished, I will want to get digital images of the exterior and the main living areas of the house. What I'm really looking for would be total exterior renderings. Also, for the interior, I want entry, living, dining, kitchen, and maybe master bed/bath. We would just like to be able to see what the finished product will look like. We would also prefer to have landscaping shown. It would be helpful to have this all done by a designer, so that we can get decorating ideas as well. I will provide the CAD file once the plans are complete. Please view the attached floor plan. I will attach the elevation plans once they are complete.
Category: Interior Design       
Skills: Interior Design, 3D Design, 3D Rendering       

k****ees
 [?]
Sign in to view client's details.
| k****ees
|    United States
Fixed Price: $500 - $1,000   |  Posted: Jul 21, 2015  |  Ends: 8h, 0m  |   8 Proposals
Two finite element models made in Ansys Workbench v14.5, a step-by-step tutorial and a document with all the considerations and analysis. The models are two tanks (steel and concrete), filled with water subject to ground acceleration (design spectrum from Ecuatorian Code). The analysis consists of a modal anaylsis and a spectral-modal analysis. The step-by-step tutorial must be made in a way that a novice user of Ansys can reproduce the models and even create a similar one. The document must contain all the information necessary to understand the dynamic behaviour of the tank. Important considerations: water as a fluid element, convective and impulsive actions in same model, sloshing, flexibility of the wall, uplifting, buckling (diamond, elephant foot), etc. A sample model should be sent to analyze the compatibility of softwares.
Category: 3D Modelling       

e****a13
 [?]
Sign in to view client's details.
| e****a13
|    Brazil
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job