Save this Search
     
Sort by:
  • Posted Date
Time Left: Less than 7 days
Hourly Rate: Less than $10 / hr   |  Duration: Not Sure  |  Posted: 42 minutes ago  |  Ends: 2d, 23h  |   4 Proposals
Project & File Requirements: -provide 2D DWG autodesk autocad files. -all walls to be drawn at 4" and wall fill hatching on separate layer -do NOT draw siding lines -do not draw trim lines -all brick ledge to be drawn at 5-1/2" -use 1/2" accuracy with autocad snaps. (NO 1/16" or 1/4"!!!) -room names & sizes shown on first draft floor plan -use separate autocad layers (wall lines, hatching, text, dimensions, doors, windows, plumbing, appliances, etc all on their own layer in autocad) Other plan info: 3x5 single hung windows, except shower, toilet, sink areas. 3' exterior doors no bi-fold doors provide AUTOCAD not PDF Can you use my EXAMPLE file to work in?
Category: Architecture       
Skills: Architecture, AutoCAD, Autodesk       

b****ver
 [?]
Sign in to view client's details.
| b****ver
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 16h, 11m ago  |  Ends: 2d, 7h  |   6 Proposals
The goal of this project will be to update a design of a PCBA for a 2500 mAh LiPo single battery power bank. PCBA specifications: Hi, we have not found a part number of the main IC. We are now choosing a provider to update this design to a new IC. We'd like the resulting design: - to reuse as much as possible from the existing design - to fully comply with this list of requirements: 1. Input: DC5V 1A, so that battery charges at 1Amp rate 2. Outputs: two independent outputs, DC5V 1A. Connection of an external device to one output automatically blocks the other output. 3. Built-in protections for input and outputs: 3.1. overvoltage 3.2. overcurrent 3.3. short circuit 4. Built-in protections for battery: 4.1. Overcharge 4.2. Overdischarge 4.3. Overcurrent 4.4. Overheating 5. Battery charging/discharging: standard 3.7V LiPo battery charging cycle, 2500 mAh battery (we will provide the samples) 6. Simple shake sensor: activates LED indication. Example:   [obscured]  /Electron...
Category: Electrical       
Preferred Location: North America, Western Europe, Eastern Europe, Eastern Asia

a****kov
 [?]
Sign in to view client's details.
| a****kov
|    United States
Fixed Price: Not Sure   |  Posted: 23h, 48m ago  |  Ends: 6d, 0h  |   17 Proposals
Create 3D model in CAD software and output into a plastic 3D model. Smarty 3D Printing project. Dimensions: Height (not counting antenna): 9.0" to 12" Outer Diameter of upper body section: minimum of 3.0" (if proportions are kept the same as the jpg drawing it will satisfy this requirement. We are located in the Bay Area in California.
Category: 3D Modelling       
Skills: 3D, AutoCAD, 3D Printing       
Preferred Location: United States

s****007
 [?]
Sign in to view client's details.
| s****007
|    United States
Fixed Price: Less than $500   |  Posted: Jul 02, 2015  |  Ends: 5d, 19h  |   18 Proposals
End product should be a high-resolution and photo-realistic 3D rendering of back wall and floor with fireplace, mantel, wood/fire in fireplace. A very simple rendering but must look like it was photographed and similar to the attached sample but without the tree, no rug, no furniture, no stockings, no floral/garland, no vases, no chalkboard, no ceiling (have wall extent to the top, left and right)...simply floor, wall, mantel with fire screen, wood and fire. I'd like the ability to have a variety of revisions to get to the final product but to start, replicating the scene as I've described above and shown in the attached is step 1. If this process looks great, there are other opportunities to do more work and add in other elements. Please only submit bids if you are able to pull off renderings that look realistic, like we photographed the room and didn't render it.
Category: 3D Modelling       
Skills: 3D Modeling, 3D Design, 3D Rendering       

j****407
 [?]
Sign in to view client's details.
| j****407
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: Jul 02, 2015  |  Ends: 5d, 19h  |   6 Proposals
We are looking for a talented FPGA programmer to help us implement a low noise (<10nV/(rootHz)) lock-in amplifier for heterodyne detection of sideband signals. Carrier frequencies range from 0.3 to 1.5MHz. The lock-in amplifier must have the ability to generate signals at specified frequencies and demodulate signals at the sum or difference of two frequencies (FM/heterodyne detection). Your job will be to develop a working prototype that does the following: 1) Takes in signals via a high speed, 16bit ADC 2) Generates a sine wave with programmable amplitude (ranging from 0 to 5V) and frequency, f2 = (1 to 1000Hz) 3) Demodulates the signals at two frequencies f1+f2, f1+2f2. f1 is determined from the DAC input. f2 is the frequency generated in step #2. 4) Outputs the RMS amplitude of the two demodulated signals via a low noise, 16bit DAC. We have an ADC and FPGA eval board already chosen, part #'s AD9268 and HSC-ADC-EVALCZ from Analog. You will need to help us choose the DAC and fi...
Category: Electrical       

N****lIR
 [?]
Sign in to view client's details.
| N****lIR
|    United States
Hourly Rate: $40 - $50 / hr   |  Duration: Not Sure  |  Posted: Jul 02, 2015  |  Ends: 5d, 7h  |   25 Proposals
Wanted organized detail oriented Solidworks injection molded parts expert Hello, I am working on a new Solidworks project and I need to make some adjustment to already existing files. I am looking for someone who is super positive and has a can do attitude. You need to be super familiar with Solidworks and designing plastic injection molded parts for manufacturing. You must be able to work in fast paced environment. You must have experience with creating gasket over molds. You must be very familiar with the plastic injection molding process. Have some knowledge in creating bump-offs, living hinges and creating mirror image parts. You must be willing to meet in person in Tucson and be available ASAP. The main components of the work will be: creating a living hinge editing existing plastic hinges designing new parts Please send me an email and include the following: Previous projects you have created What the responsibilities were Who your boss was Along with what each...
Category: Product Design       

A****as1
 [?]
Sign in to view client's details.
| A****as1
|    United States
Fixed Price: Less than $500   |  Posted: Jul 01, 2015  |  Ends: 17h, 12m  |   30 Proposals
We receive new projects every week and we are looking for multiple providers to join our team. Currently we have several huge projects that needed to be completed ASAP and we are looking for someone who can produce beautiful color floor plans and elevations. QUALITY is a MUST! Contact us ASAP if you are interested. You MUST have architectural or Interior Design background in order to be qualified. Add this line (Project 8199-8618) to your proposal so we know you have read our requirement. *All proposals that do not include this line will be rejected. IMPORTANT NOTE: If you lie about your portfolio DO NOT take this job!! We have been in visualization industry for over 15 years and we are very good at catching people who lie about their work!! If we caught you we will file a complaint to Elance and ask them to take down your profile!! *Remember to provide previous work samples. Your quote should be based on per rendering.
Category: Interior Design       
Skills: Illustration, Architecture, AutoCAD       

c****usa
 [?]
Sign in to view client's details.
| c****usa
|    United States
Fixed Price: $20 - $75   |  Posted: Jun 29, 2015  |  Ends: 2d, 19h  |   8 Proposals
I am looking for a complete design of a mobile Espresso Bar. After your design the carpenter will build the final product. WORK - PRODUCT A Mobile Espresso Bar (see attached pictures) Basis of the mobile espresso bar should be 1. a 1260x790mm kitchen island and needs to be adapted to it needs (for example an ikea stenstorp kitchen island). OR 2. Draw an own model This semifinished product has to be finished to a Mobile Espresso Bar. It should provide space for: Above Countertop :: Coffee Mashine (600x600x700mm (Width/Depth/Height)) :: Grinder :: Countertop Lid, straw and Condiment Organizers :: All kind of holes for supply (electric, water, waste etc) :: Refridgerator for cold drinks and/or take away cake/sandwiches smoothies :: a space where a customer can prepare his coffee, example to finish with sugar, stir and put a top on the cup. :: A space where the customer can drink the coffee. Can be made with one of the sideparts (see closing) :: any input or ideas will be great Belo...
Category: CAD       
Skills: 3D, 3D Modeling, AutoCAD, Manufacturing Design       

w****nfo
 [?]
Sign in to view client's details.
| w****nfo
|    Austria
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 28, 2015  |  Ends: 2d, 0h  |   55 Proposals
I need someone to take my "technical" drawings, specifications, and ideas and turn them into CAD drawings that I can submit for prototyping and manufacturing. I've provided 85% of what is needed, I just lack the skill to get that last 15% done. There will be some assistance needed from you to determine fabrication material and tolerances. Currently, I have 8 drawings showing every component of the device and can work daily with you on any questions or specifics you need from me to complete the project. I would prefer someone to provide an hourly rate bid then we can discuss how many hours you will need to complete once you have had a chance to review the drawings and the scope of the project. I'm mechanically inclined, and have taken some engineering courses so I'll be able to partner with you until we get it right. If all goes well, future work can be awarded to you on a project by project basis. While timelines are fluctuating, I'd like to get the project started b...
Category: CAD       
Skills: AutoCAD, Manufacturing Design       

K****nis
 [?]
Sign in to view client's details.
| K****nis
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 28, 2015  |  Ends: 1d, 21h  |   3 Proposals
We are an international Point of Purchase Display company looking for a designer to fulfill on a project we have on hand. The designer has to be familiar with the different material used in both permanent and temporary display. Temporary: Litho print .003 to .048 and mount to corrugated and/or chip utilizing UV litho 40" up to 81" in 6/c with large format digital and large format silk screen supported by complete bindery and high speed POP display finishing. Permanent: Fabrication in acrylic, wood, wire, metal, and fixtures along with high speed vacuum forming and injection molding (500 ton). Attached are two rendering concept which we need to turn into structural drawing for manufacturing. Please reply back with an estimated quote. Thank you!
Category: Other - Engineering &...       

d****ter
 [?]
Sign in to view client's details.
| d****ter *
|    United States
Fixed Price: Less than $500   |  Posted: Jun 28, 2015  |  Ends: 1d, 18h  |   11 Proposals
I would like for someone to design an apparatus that would attach to a squat rack with a J-hook attachment and remain very stable once in place. Essentially the device will be built off of a J -hook. see photo of the J hook attached. The apparatus should have two pads 24 inches long with a diameter of 6 inches, that would support the legs of the person doing the handstand to help them regain balance without needing to return their feet the ground, each time balance is lost. The key feature of the apparatus would be a mechanism that would allow one of the pads to be positioned directly above the other (in the start position) and rotate safely(smoothly with no loud noises) around the feet of the person doing the handstand once they "kick up" into position. This rotational movement of the top pad would be activated by the pressure of the (heels of calfs)hitting the primary support pad. Once this rotation has a occurred, the apparatus would provide support on both sides. Ide...
Category: Product Design       
Skills: Manufacturing Design, Product Design       
Preferred Location: North America

k****ken
 [?]
Sign in to view client's details.
| k****ken
|    Canada
Hourly Rate: $25 - $45 / hr   |  Duration: 1-2 weeks  |  Posted: Jun 28, 2015  |  Ends: 1d, 7h  |   9 Proposals
We are a small startup architecture firm in Chicago working on a project in Springfield Illinois. We are adding an addition to an existing warehouse. We do not have drawings of the existing building, but it is a rigid frame existing warehouse. We would like your recommendations on the type of foundation system to use to tie into the existing foundation as well as rebar size, etc. Plans will be provided upon request. Please let us know if you have any questions. Requirments: Structural Engineer Degree, Understanding of structural systems and foundations. Must have 5+ years of experience. Midwest experience preferred, stuctural engineering license preferred. Knowledge of Revit or Autocad a plus if details are required. We are on a tight deadline and this is our last issue.
Category: Architecture       
Preferred Location: United States

d****mek
 [?]
Sign in to view client's details.
| d****mek
|    United States
Fixed Price: Not Sure   |  Posted: Jun 25, 2015  |  Ends: 6d, 23h  |   0 Proposals
Hi, This is a one time gig. I have a working Epson 1400 (a3 format) that is dissembled but working. I would like to convert it to a DTG with flatbed.. See link:   [obscured]  /shop/442/DIY-DTG-Epson-1400-Complete-Plans--Digital-Download I have the plans available (there aren't written properly) so prefer someone who has done this before or is comfortable doing it. I can send you the plans if you want to see them (plans from Alienbunker). Here one of a working sample:   [obscured]  /watch?v=GshvmHIIBaA There are other printers Epson 1400 into DTG on youtube. I am based in Brooklyn, so prefer people from New York or the Area so I can deliver the printer. Let me know how much you charge for it , THANKS :) Looking forward,
Category: Mechanical       
Preferred Location: United States

d****rio
 [?]
Sign in to view client's details.
| d****rio
|    United States
Fixed Price: Less than $500   |  Posted: Jun 25, 2015  |  Ends: 6d, 22h  |   27 Proposals
Requires on off switch or method for going into sleep mode. The circuit board and components need to be as small as possible.
Category: Electrical       

s****ell
 [?]
Sign in to view client's details.
| s****ell
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 25, 2015  |  Ends: 6d, 22h  |   7 Proposals
BUILDING SPECIFICATION must comply to uk standards Drawn in tekla including full set of drawing and full takeoff including bolted connection Pad foundation & slab design for light industrial use Economical design Use : Equestrian Centre Horse / Riding Arena Stables / Farm Shed / Warehouse ? single skin, vinyl coated steel cladding ? cold rolled galvanised steel frame 20 metres span x 40 metres long x 4 metres high to the eaves. ? 1 x electric roller shutter (2.5m x 3m) ? 1 x steel multipoint locking personall access door, rooflights and roof fillers Conforms to BS5950 (Industrial buildings) Key Elements Wider Industrial Building Spans Sharp and Strong steel buildings range from 3m to 25m clear span and up to 6m high to the eaves. Even bay widths are wider with a maximum of 6m wide which ensures less bays are required for longer buildings. Variable Pitch Roof Sharp and Strong offer a choice of 10.15 and 20 degrees pitch on the entire industrial building range. The ...
Category: Civil & Structural       
Preferred Location: North America, Western Europe, Eastern Europe, Middle East & Central Asia, Australia/Oceania

c****pms
 [?]
Sign in to view client's details.
| c****pms
|    Australia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 25, 2015  |  Ends: 6d, 22h  |   8 Proposals
We are looking for someone extremely well educated, most likely an engineer, who has worked with either the technical aspects of biomass enough to understand the complexities of generating electricity from agricultural waste, or someone with extensive experience with fuel procurement related to biomass. We are an international renewable energy development company looking for a resident expert in all things biomass to keep on our company roster and payroll.
Category: Other - Engineering &...       

A****ner
 [?]
Sign in to view client's details.
| A****ner
|    United States
Fixed Price: $500 - $1,000   |  Posted: Jun 25, 2015  |  Ends: 6d, 21h  |   11 Proposals
This device will sit on a standard tripod fitting, so that it can be raised or lowered. The end result will be a projection, in a darkened room, through a transparency film (or otherwise) of a pattern of celestial constellation stars. The raising or lowering will cause the image to expand on the ceiling from a ten foot by ten foot room (3meter x 3meter) to a larger room up to twenty by twenty. This would also allow a projection of a few constellations or more constellations on the ceiling. I imagine a box with a few selections of transparency film at the top of the box and a light source inside that can be hightened or lowered to create the appropriate sized projected image on the ceiling. But having said that... I'm probably way off! LOL! I'm looking for a final design and prototype that can easily be assembled by most anyone, with stock material that we can find that would be readily available from suppliers.
Category: Product Design       

V****r88
 [?]
Sign in to view client's details.
| V****r88
|    United States
Fixed Price: Not Sure   |  Posted: Jun 25, 2015  |  Ends: 6d, 20h  |   28 Proposals
I am building a new home and need to get a 3d rendering to promote the sale. I have attached the Architects drawings. They are hand drawn so I don't have CAD drawings. I have also included a few pictures of the "proposed" look. We will need front, side and back elevations showing the detached garage and landscaping. We are building out a community tworiversvillage and we need to get 3D Rendering videos created for each of the different home models we intend to sell on project. We need the videos to include the interior as well as the exterior of the property. Here are links to an example of what we are looking for as finished product. These were both built on Lumion. Interior example   [obscured]  /86611203 Exterior example   [obscured]  /86512306 We will provide all unit specifications and CAD files for each house, as well as any other materials that are required. Attached are the three floor plans that we are working off of. We need a complete video for e...
Category: 3D Modelling       
Skills: 3D, 3D Modeling, 3D Rendering       

v****ial
 [?]
Sign in to view client's details.
| v****ial
|    United States
Fixed Price: Not Sure   |  Posted: Jun 25, 2015  |  Ends: 6d, 20h  |   14 Proposals
design is already made in proteus 8, only two things need getting sorted Move switch 1 inch below, move 5 pins header to further side
Category: Electrical       

B****rat
 [?]
Sign in to view client's details.
| B****rat
|    United Kingdom
Fixed Price: $20 - $60   |  Posted: Jun 25, 2015  |  Ends: 6d, 19h  |   14 Proposals
Hello, I need your help with refining my product design. Currently, I have 3D images of a general look of how I would like the product to look but the design is not fully functional or practical. My product is a Macbook Pro Case that has liquid and glitter inside of it, giving a snowglobe effect within the case. I need help figuring out how to piece this case together and how to get the glitter and liquid inside. I have spoken to a manufacturer and they say that they would be able to create my parts but would not be able to add the liquid and glitter inside, so that means it would be left up to me to perform that duty, which makes it vital that I find a way I can insert the liquid and glitter myself and have the product be reliable when it comes to not leaking and being sturdy. Would you be able to help me figure out how to piece everything together? P.s. If you are able to help, I would then like to hire you (if you would like) to create a 3D image (CAD) of the case we refined so I...
Category: Product Design       

b****ung
 [?]
Sign in to view client's details.
| b****ung
|    United States
Hourly Rate: More than $50 / hr   |  Duration: 1-2 weeks  |  Posted: Jun 25, 2015  |  Ends: 6d, 19h  |   11 Proposals
This project will require the consultant/contractor to establish various quality control processes within our organization. The work will include collaborating with and guiding the management and production team.
Category: Contract Manufacturing       
Skills: Manufacturing Design       

h****tic
 [?]
Sign in to view client's details.
| h****tic
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 25, 2015  |  Ends: 6d, 19h  |   46 Proposals
We require a general sketch of a property in an apartment format. We have a sample you can refer however the design will have to be unique and to the new specifications. We have multiple projects to offer and will be looking for someone with a reasonable rate, quick turnaround and professional work. This project requires (1) 4 Levels - Basement Carpark, Level 1, 2 and 3 (2) Property Length 48.89 Width 19.89 = 973 m2 (3) 6 Apartments Level 1 (4) 6 Apartments Level 2 (5) 2 Apartment Level 3 (6) 14 Carspaces (7) Aiming far all 2 Bedroom, 2 bathroom(1Toilet/Shower/Sink + 1 Toilet/Sink) Apartments (8) Front openSpace 4 meters minimum (9) Rear openSpace 4 Meters Minimum (10) Side openSpace 3 meters minimum (11) Stairs and Lift Required (12) Measurements must be accurate (13) Follow Sample Detail (14) Must be able to blow up plans to 90cm*1.5m (15) Colour Code Rooms (16) Avoid Box like design (17) 40sqm min of outdoor space on ground level with 5 meters width min (18) Balconies of 8sqm wit...
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

d****ver
 [?]
Sign in to view client's details.
| d****ver
|    Australia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 25, 2015  |  Ends: 6d, 18h  |   26 Proposals
We are looking for an engineer with FEA experience to perform an analysis on a lifting arm. The preference is for Autodesk Nastran.
Category: Mechanical       
Skills: Finite Element Analysis       

J****sNT
 [?]
Sign in to view client's details.
| J****sNT
|    Vietnam
Hourly Rate: Not Sure   |  Duration: 1-3 months  |  Posted: Jun 25, 2015  |  Ends: 6d, 18h  |   31 Proposals
I have a design/idea/invention that I want to get patented. I have a small model that can be used to draw out my plan in details.
Category: Product Design       

k****nco
 [?]
Sign in to view client's details.
| k****nco
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job