Save this Search
     
Sort by:
  • Posted Date
Hiring Open
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 8h, 17m ago  |  Ends: 2d, 15h  |   2 Proposals
The goal of this project will be to update a design of a PCBA for a 2500 mAh LiPo single battery power bank. PCBA specifications: Hi, we have not found a part number of the main IC. We are now choosing a provider to update this design to a new IC. We'd like the resulting design: - to reuse as much as possible from the existing design - to fully comply with this list of requirements: 1. Input: DC5V 1A, so that battery charges at 1Amp rate 2. Outputs: two independent outputs, DC5V 1A. Connection of an external device to one output automatically blocks the other output. 3. Built-in protections for input and outputs: 3.1. overvoltage 3.2. overcurrent 3.3. short circuit 4. Built-in protections for battery: 4.1. Overcharge 4.2. Overdischarge 4.3. Overcurrent 4.4. Overheating 5. Battery charging/discharging: standard 3.7V LiPo battery charging cycle, 2500 mAh battery (we will provide the samples) 6. Simple shake sensor: activates LED indication. Example:   [obscured]  /Electron...
Category: Electrical       
Preferred Location: North America, Western Europe, Eastern Europe

a****kov
 [?]
Sign in to view client's details.
| a****kov
|    United States
Fixed Price: Not Sure   |  Posted: 15h, 54m ago  |  Ends: 6d, 8h  |   11 Proposals
Create 3D model in CAD software and output into a plastic 3D model. Smarty 3D Printing project. Dimensions: Height (not counting antenna): 9.0" to 12" Outer Diameter of upper body section: minimum of 3.0" (if proportions are kept the same as the jpg drawing it will satisfy this requirement. We are located in the Bay Area in California.
Category: 3D Modelling       
Skills: 3D, AutoCAD, 3D Printing       
Preferred Location: United States

s****007
 [?]
Sign in to view client's details.
| s****007
|    United States
Fixed Price: Less than $500   |  Posted: 20h, 6m ago  |  Ends: 6d, 3h  |   17 Proposals
End product should be a high-resolution and photo-realistic 3D rendering of back wall and floor with fireplace, mantel, wood/fire in fireplace. A very simple rendering but must look like it was photographed and similar to the attached sample but without the tree, no rug, no furniture, no stockings, no floral/garland, no vases, no chalkboard, no ceiling (have wall extent to the top, left and right)...simply floor, wall, mantel with fire screen, wood and fire. I'd like the ability to have a variety of revisions to get to the final product but to start, replicating the scene as I've described above and shown in the attached is step 1. If this process looks great, there are other opportunities to do more work and add in other elements. Please only submit bids if you are able to pull off renderings that look realistic, like we photographed the room and didn't render it.
Category: 3D Modelling       
Skills: 3D Modeling, 3D Design, 3D Rendering       

j****407
 [?]
Sign in to view client's details.
| j****407
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: 20h, 16m ago  |  Ends: 6d, 3h  |   6 Proposals
We are looking for a talented FPGA programmer to help us implement a low noise (<10nV/(rootHz)) lock-in amplifier for heterodyne detection of sideband signals. Carrier frequencies range from 0.3 to 1.5MHz. The lock-in amplifier must have the ability to generate signals at specified frequencies and demodulate signals at the sum or difference of two frequencies (FM/heterodyne detection). Your job will be to develop a working prototype that does the following: 1) Takes in signals via a high speed, 16bit ADC 2) Generates a sine wave with programmable amplitude (ranging from 0 to 5V) and frequency, f2 = (1 to 1000Hz) 3) Demodulates the signals at two frequencies f1+f2, f1+2f2. f1 is determined from the DAC input. f2 is the frequency generated in step #2. 4) Outputs the RMS amplitude of the two demodulated signals via a low noise, 16bit DAC. We have an ADC and FPGA eval board already chosen, part #'s AD9268 and HSC-ADC-EVALCZ from Analog. You will need to help us choose the DAC and fi...
Category: Electrical       

N****lIR
 [?]
Sign in to view client's details.
| N****lIR
|    United States
Hourly Rate: $40 - $50 / hr   |  Duration: Not Sure  |  Posted: Jul 02, 2015  |  Ends: 5d, 15h  |   22 Proposals
Wanted organized detail oriented Solidworks injection molded parts expert Hello, I am working on a new Solidworks project and I need to make some adjustment to already existing files. I am looking for someone who is super positive and has a can do attitude. You need to be super familiar with Solidworks and designing plastic injection molded parts for manufacturing. You must be able to work in fast paced environment. You must have experience with creating gasket over molds. You must be very familiar with the plastic injection molding process. Have some knowledge in creating bump-offs, living hinges and creating mirror image parts. You must be willing to meet in person in Tucson and be available ASAP. The main components of the work will be: creating a living hinge editing existing plastic hinges designing new parts Please send me an email and include the following: Previous projects you have created What the responsibilities were Who your boss was Along with what each...
Category: Product Design       

A****as1
 [?]
Sign in to view client's details.
| A****as1
|    United States
Fixed Price: Less than $500   |  Posted: Jul 01, 2015  |  Ends: 1d, 1h  |   30 Proposals
We receive new projects every week and we are looking for multiple providers to join our team. Currently we have several huge projects that needed to be completed ASAP and we are looking for someone who can produce beautiful color floor plans and elevations. QUALITY is a MUST! Contact us ASAP if you are interested. You MUST have architectural or Interior Design background in order to be qualified. Add this line (Project 8199-8618) to your proposal so we know you have read our requirement. *All proposals that do not include this line will be rejected. IMPORTANT NOTE: If you lie about your portfolio DO NOT take this job!! We have been in visualization industry for over 15 years and we are very good at catching people who lie about their work!! If we caught you we will file a complaint to Elance and ask them to take down your profile!! *Remember to provide previous work samples. Your quote should be based on per rendering.
Category: Interior Design       
Skills: Illustration, Architecture, AutoCAD       

c****usa
 [?]
Sign in to view client's details.
| c****usa
|    United States
Fixed Price: $20 - $75   |  Posted: Jun 29, 2015  |  Ends: 3d, 3h  |   8 Proposals
I am looking for a complete design of a mobile Espresso Bar. After your design the carpenter will build the final product. WORK - PRODUCT A Mobile Espresso Bar (see attached pictures) Basis of the mobile espresso bar should be 1. a 1260x790mm kitchen island and needs to be adapted to it needs (for example an ikea stenstorp kitchen island). OR 2. Draw an own model This semifinished product has to be finished to a Mobile Espresso Bar. It should provide space for: Above Countertop :: Coffee Mashine (600x600x700mm (Width/Depth/Height)) :: Grinder :: Countertop Lid, straw and Condiment Organizers :: All kind of holes for supply (electric, water, waste etc) :: Refridgerator for cold drinks and/or take away cake/sandwiches smoothies :: a space where a customer can prepare his coffee, example to finish with sugar, stir and put a top on the cup. :: A space where the customer can drink the coffee. Can be made with one of the sideparts (see closing) :: any input or ideas will be great Belo...
Category: CAD       
Skills: 3D, 3D Modeling, AutoCAD, Manufacturing Design       

w****nfo
 [?]
Sign in to view client's details.
| w****nfo
|    Austria
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 28, 2015  |  Ends: 2d, 8h  |   55 Proposals
I need someone to take my "technical" drawings, specifications, and ideas and turn them into CAD drawings that I can submit for prototyping and manufacturing. I've provided 85% of what is needed, I just lack the skill to get that last 15% done. There will be some assistance needed from you to determine fabrication material and tolerances. Currently, I have 8 drawings showing every component of the device and can work daily with you on any questions or specifics you need from me to complete the project. I would prefer someone to provide an hourly rate bid then we can discuss how many hours you will need to complete once you have had a chance to review the drawings and the scope of the project. I'm mechanically inclined, and have taken some engineering courses so I'll be able to partner with you until we get it right. If all goes well, future work can be awarded to you on a project by project basis. While timelines are fluctuating, I'd like to get the project started b...
Category: CAD       
Skills: AutoCAD, Manufacturing Design       

K****nis
 [?]
Sign in to view client's details.
| K****nis
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 28, 2015  |  Ends: 2d, 5h  |   3 Proposals
We are an international Point of Purchase Display company looking for a designer to fulfill on a project we have on hand. The designer has to be familiar with the different material used in both permanent and temporary display. Temporary: Litho print .003 to .048 and mount to corrugated and/or chip utilizing UV litho 40" up to 81" in 6/c with large format digital and large format silk screen supported by complete bindery and high speed POP display finishing. Permanent: Fabrication in acrylic, wood, wire, metal, and fixtures along with high speed vacuum forming and injection molding (500 ton). Attached are two rendering concept which we need to turn into structural drawing for manufacturing. Please reply back with an estimated quote. Thank you!
Category: Other - Engineering &...       

d****ter
 [?]
Sign in to view client's details.
| d****ter *
|    United States
Fixed Price: Less than $500   |  Posted: Jun 28, 2015  |  Ends: 2d, 1h  |   11 Proposals
I would like for someone to design an apparatus that would attach to a squat rack with a J-hook attachment and remain very stable once in place. Essentially the device will be built off of a J -hook. see photo of the J hook attached. The apparatus should have two pads 24 inches long with a diameter of 6 inches, that would support the legs of the person doing the handstand to help them regain balance without needing to return their feet the ground, each time balance is lost. The key feature of the apparatus would be a mechanism that would allow one of the pads to be positioned directly above the other (in the start position) and rotate safely(smoothly with no loud noises) around the feet of the person doing the handstand once they "kick up" into position. This rotational movement of the top pad would be activated by the pressure of the (heels of calfs)hitting the primary support pad. Once this rotation has a occurred, the apparatus would provide support on both sides. Ide...
Category: Product Design       
Skills: Manufacturing Design, Product Design       
Preferred Location: North America

k****ken
 [?]
Sign in to view client's details.
| k****ken
|    Canada
Hourly Rate: $25 - $45 / hr   |  Duration: 1-2 weeks  |  Posted: Jun 28, 2015  |  Ends: 1d, 15h  |   9 Proposals
We are a small startup architecture firm in Chicago working on a project in Springfield Illinois. We are adding an addition to an existing warehouse. We do not have drawings of the existing building, but it is a rigid frame existing warehouse. We would like your recommendations on the type of foundation system to use to tie into the existing foundation as well as rebar size, etc. Plans will be provided upon request. Please let us know if you have any questions. Requirments: Structural Engineer Degree, Understanding of structural systems and foundations. Must have 5+ years of experience. Midwest experience preferred, stuctural engineering license preferred. Knowledge of Revit or Autocad a plus if details are required. We are on a tight deadline and this is our last issue.
Category: Architecture       
Preferred Location: United States

d****mek
 [?]
Sign in to view client's details.
| d****mek
|    United States
Hourly Rate: Not Sure   |  Duration: 1-2 weeks  |  Posted: Jun 25, 2015  |  Ends: 6d, 23h  |   15 Proposals
I wish to build several types of Pilates Exercise machine known as the Reformers, Cadillacs, Chairs etc. I am looking for someone suitably qualified in Autocad design and possibly someone who is aware of these type of machines, to design my vision so I can then get them manufactured. Thank you. Lisa Walsh
Category: CAD       
Skills: Graphic Design, AutoCAD, 3D Design       

P****ody
 [?]
Sign in to view client's details.
| P****ody
|    Ireland
Fixed Price: Less than $500   |  Posted: Jun 25, 2015  |  Ends: 6d, 18h  |   14 Proposals
Implementation of a thermal analysis on a PCB By the supplied scheme. The PCB is located in an enclosure made of multiple materials: Plastic, screws and metal. General description of PCB and enclosure can be found in the attached images. Ambient temperature is 50 degrees Celsius. 3D models and required details will be supplied by demand. Please specify the required information and delivery time in your quotation.
Category: Mechanical       

p****nuk
 [?]
Sign in to view client's details.
| p****nuk
|    Israel
Fixed Price: Less than $500   |  Posted: Jun 25, 2015  |  Ends: 6d, 15h  |   8 Proposals
Looking for renderings of our initial product designs for use in marketing materials and sending to manufacturers. Experience in design and product development of fitness / consumer products preferred. Person must understand the technology and develop & design the system within 4 weeks. Will send out full project details upon request Sincerely! North Lion Team
Category: Product Design       

N****oup
 [?]
Sign in to view client's details.
| N****oup
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 25, 2015  |  Ends: 6d, 14h  |   50 Proposals
A Solidworks expert is needed to draw up a simple prototype of a blood bag 'holder' for a biology lab, to be 3D printed. More than one iteration will likely be required before the final product is achieved.
Category: 3D Modelling       
Skills: 3D, AutoCAD, SolidWorks       

b****lab
 [?]
Sign in to view client's details.
| b****lab
|    Canada
Fixed Price: $50 - $150   |  Posted: Jun 24, 2015  |  Ends: 6d, 13h  |   12 Proposals
Need to design an Ultrasonic motion sensor and notfyer to be installed in the wheel arches of a car. Need the design to be able to build the unit myself. This project is to avoid parking tickets my creating notification when a parking officer marks my car tyres with chalk. When the parking officer moved their hand under the wheel arch the movement will be detected and I will be notified by text, email or key fob beeper. ( Range required approx 500m and within a building) The sensor could be mounted under the wheel arches ( the 2 front) or on the body of the car above the wheel arches. Ideally the components to build the project will be less that $250 and be available from online sellers. I imagine Arduino or rasberry pi will be the best options for a controller. Ideally the unit will be battery powered so I dont have to wire it into the car. With the bulk of the unit being attached to the dash an an on off switch so I can arm the unit when I get out of the car. Ideally the plans ...
Category: Electrical       
Skills: Electrical Engineering, Electronics       

m****b33
 [?]
Sign in to view client's details.
| m****b33
|    Australia
Fixed Price: Not Sure   |  Posted: Jun 24, 2015  |  Ends: 6d, 11h  |   1 Proposal
JOB DESCRIPTION AND EXPERIENCE : Project Management Responsibilities (New Product Introduction) ?Strong Background and Experience in Project Management for New Product Introduction. Manage product development from Evaluation Stage up to Mass production Stage. ?Make over-all Planning and Progress follow-up of the Project, to meet Product Delivery and Launching on time. ?Coordinate and communicate closely to all related sections from Parts Procurement, Warehousing, Planning, Production, Manufacturing Eng'g, Parts Eng'g, Quality assurance and Logistics to meet the target and proper execution of new product introduction. ?Review Product Function capability thru evaluation, assess against design standards and highlights failure that need correction. Working closely to Product Evaluation team, Parts Engineering and Quality Assurance to discuss Quality issues and concerns to meet the highest quality standard and cost competitive product. ?Work out and ensure the closure of Problem ...
Category: Other - Engineering &...       

B****n23
 [?]
Sign in to view client's details.
| B****n23
|    Philippines
Hourly Rate: Not Sure   |  Duration: 1-2 weeks  |  Posted: Jun 24, 2015  |  Ends: 6d, 9h  |   33 Proposals
I have plans of a building , but I'm not too happy with the final layout and would like an architect to look at it and give it a more modern feel and more aesthetics details . I will need estimates of quantities of materials to be used
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

p****981
 [?]
Sign in to view client's details.
| p****981
|    United States
Fixed Price: Not Sure   |  Posted: Jun 24, 2015  |  Ends: 6d, 9h  |   1 Proposal
Completed 10 page CD set for approx. 1,500sf Dental Clinic requires review and stamping by Illinois Licensed Architect for Permit Submittal. PDF's available for review upon request.
Category: Architecture       
Skills: Architecture       

S****one
 [?]
Sign in to view client's details.
| S****one
|    United States
Fixed Price: Less than $500   |  Posted: Jun 24, 2015  |  Ends: 6d, 8h  |   7 Proposals
We need a custom cushion made out of Memory Foam. We have a design ready via .IGS file, and looking forward to receiving any competitive price quotes. Our target time to receive this prototype should be received within 2 weeks. If you need more than 2 weeks to complete this job, let us know a date you could have this delivered, so we may consider.
Category: Other - Engineering &...       

M****e-M
 [?]
Sign in to view client's details.
| M****e-M
|    United States
Fixed Price: Less than $500   |  Posted: Jun 24, 2015  |  Ends: 6d, 8h  |   12 Proposals
Project price: US$500.00 or please bid lower amount to win this fix price contract Project duration 1 to 2 months Project location: Texas Need experienced architect only Project Start Date: Immediate You must submit your best and most comprehensive work in a single multi-page pdf file or link to it. No dwg file, no rar file please. I am not interested to see your rendering but the engineering design that will be used to build the house. Please give your Skype id for video interview and the best time to Skype you. Using our existing Autocad dwg file, pdf files, hand sketch drawing and pictures, for a 2-story, 16,000 sq. ft. AUR, you will modify and redraw either in Autocad 3D or in Revit. I will prefer using Revit. Your drawing will include floor plans, elevation, roofing, ceiling & walls special decorative features, sectional of complex objects in the house, all utilities, and site map. Your drawing is subject to approval by US licensed architect and getting permit...
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD, Autodesk       

M****er1
 [?]
Sign in to view client's details.
| M****er1 *
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 24, 2015  |  Ends: 6d, 8h  |   19 Proposals
We look on regular base for freelancer who are professional Geomagic Design X user. Based on STL files (geometry + freeform) you have to create parametric CAD-Files (Step + iges). Looking forward to receive your application.
Category: CAD       
Skills: 3D Design       

3****fan
 [?]
Sign in to view client's details.
| 3****fan
|    Germany
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 24, 2015  |  Ends: 6d, 7h  |   2 Proposals
Looking for a Business Development Manager for our staffing company(Atlanta). The ideal candidate will have a proven track record of developing strong client relationships with CEO, VP, Directors and Managers. The ability to understand complex technical issues and business issues is critical. On a day-to-day basis, this person will be identifying, qualifying and closing opportunities. Our target market is mid-large size corporations. Experience in selling staffing solutions desired.Identify and secure new client contracts. Meet or exceed revenue goals for the company.Create and maintain a sales and marketing plan.Develop strategy to improve and expand existing accounts. Maintain accurate information on all clients. kindly contact with resume
Category: Other - Engineering &...       

s****a30
 [?]
Sign in to view client's details.
| s****a30
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: 3-4 weeks  |  Posted: Jun 24, 2015  |  Ends: 6d, 6h  |   2 Proposals
I am wanting to produce and sell a performance enhancing powder containing different amino acids etc. I want to know if certain ingredients can be combined and safely ingested, where is a reliable and cost effective place to source them, how much they cost, if a supplier could mix and package the ingredients for me, package design and manufacturing and distribution including set up of online website and marketing. I want someone to research the above mentioned and contact suppliers and manufacturers etc for me.Thanks
Category: Product Design       

O****a22
 [?]
Sign in to view client's details.
| O****a22
|    Australia
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job