Hourly Rate: Not Sure
| Duration: Not Sure
| Posted: 6h, 18m ago | Ends: 2d, 17h |
The goal of this project will be to update a design of a PCBA for a 2500 mAh LiPo single battery power bank. PCBA specifications: Hi, we have not found a part number of the main IC. We are now choosing a provider to update this design to a new IC. We'd like the resulting design: - to reuse as much as possible from the existing design - to fully comply with this list of requirements: 1. Input: DC5V 1A, so that battery charges at 1Amp rate 2. Outputs: two independent outputs, DC5V 1A. Connection of an external device to one output automatically blocks the other output. 3. Built-in protections for input and outputs: 3.1. overvoltage 3.2. overcurrent 3.3. short circuit 4. Built-in protections for battery: 4.1. Overcharge 4.2. Overdischarge 4.3. Overcurrent 4.4. Overheating 5. Battery charging/discharging: standard 3.7V LiPo battery charging cycle, 2500 mAh battery (we will provide the samples) 6. Simple shake sensor: activates LED indication. Example: [obscured] /Electron...
Preferred Location: North America, Western Europe, Eastern Europe
Fixed Price: Not Sure
| Posted: 13h, 55m ago | Ends: 6d, 10h |
Create 3D model in CAD software and output into a plastic 3D model. Smarty 3D Printing project. Dimensions: Height (not counting antenna): 9.0" to 12" Outer Diameter of upper body section: minimum of 3.0" (if proportions are kept the same as the jpg drawing it will satisfy this requirement. We are located in the Bay Area in California.
Category: 3D Modelling
Preferred Location: United States
Fixed Price: Less than $500
| Posted: 18h, 7m ago | Ends: 6d, 5h |
End product should be a high-resolution and photo-realistic 3D rendering of back wall and floor with fireplace, mantel, wood/fire in fireplace. A very simple rendering but must look like it was photographed and similar to the attached sample but without the tree, no rug, no furniture, no stockings, no floral/garland, no vases, no chalkboard, no ceiling (have wall extent to the top, left and right)...simply floor, wall, mantel with fire screen, wood and fire. I'd like the ability to have a variety of revisions to get to the final product but to start, replicating the scene as I've described above and shown in the attached is step 1. If this process looks great, there are other opportunities to do more work and add in other elements. Please only submit bids if you are able to pull off renderings that look realistic, like we photographed the room and didn't render it.
Fixed Price: $1,000 - $5,000
| Posted: 18h, 17m ago | Ends: 6d, 5h |
We are looking for a talented FPGA programmer to help us implement a low noise (<10nV/(rootHz)) lock-in amplifier for heterodyne detection of sideband signals. Carrier frequencies range from 0.3 to 1.5MHz. The lock-in amplifier must have the ability to generate signals at specified frequencies and demodulate signals at the sum or difference of two frequencies (FM/heterodyne detection). Your job will be to develop a working prototype that does the following: 1) Takes in signals via a high speed, 16bit ADC 2) Generates a sine wave with programmable amplitude (ranging from 0 to 5V) and frequency, f2 = (1 to 1000Hz) 3) Demodulates the signals at two frequencies f1+f2, f1+2f2. f1 is determined from the DAC input. f2 is the frequency generated in step #2. 4) Outputs the RMS amplitude of the two demodulated signals via a low noise, 16bit DAC. We have an ADC and FPGA eval board already chosen, part #'s AD9268 and HSC-ADC-EVALCZ from Analog. You will need to help us choose the DAC and fi...
Hourly Rate: $40 - $50 / hr
| Duration: Not Sure
| Posted: Jul 02, 2015 | Ends: 5d, 17h |
Wanted organized detail oriented Solidworks injection molded parts expert Hello, I am working on a new Solidworks project and I need to make some adjustment to already existing files. I am looking for someone who is super positive and has a can do attitude. You need to be super familiar with Solidworks and designing plastic injection molded parts for manufacturing. You must be able to work in fast paced environment. You must have experience with creating gasket over molds. You must be very familiar with the plastic injection molding process. Have some knowledge in creating bump-offs, living hinges and creating mirror image parts. You must be willing to meet in person in Tucson and be available ASAP. The main components of the work will be: creating a living hinge editing existing plastic hinges designing new parts Please send me an email and include the following: · Previous projects you have created · What the responsibilities were · Who your boss was · Along with what each...
Fixed Price: Less than $500
| Posted: Jul 01, 2015 | Ends: 1d, 3h |
We receive new projects every week and we are looking for multiple providers to join our team. Currently we have several huge projects that needed to be completed ASAP and we are looking for someone who can produce beautiful color floor plans and elevations. QUALITY is a MUST! Contact us ASAP if you are interested. You MUST have architectural or Interior Design background in order to be qualified. Add this line (Project 8199-8618) to your proposal so we know you have read our requirement. *All proposals that do not include this line will be rejected. IMPORTANT NOTE: If you lie about your portfolio DO NOT take this job!! We have been in visualization industry for over 15 years and we are very good at catching people who lie about their work!! If we caught you we will file a complaint to Elance and ask them to take down your profile!! *Remember to provide previous work samples. Your quote should be based on per rendering.
Category: Interior Design
Fixed Price: $750 - $1,100
| Posted: Jul 01, 2015 | Ends: 4d, 21h |
I already have a design and all support files for one version of this tool, but it will only work for one major style of pallet. The original designer is no longer available. I need another version designed for use with another style of pallet. The original design files may provide a good launching pad for starting the new version. This product will be 3D printed for initial prototypes and most likely for small trial production runs. Ultimately, it will be injection molded. So I need a professional who understands the nuances of both types of production methods for each phase of the process. An understanding and ability to recommend appropriate types of materials is a plus. A signed NDA will be required before discussion of the project and commencement of work. Scope of work is to discuss goals and design objectives prior to design work; provide completed, detailed drawings and CAD files that can be immediately turned into a 3D-printed prototype, as well as being set up for the fina...