Save this Search
     
Sort by:
  • Posted Date
Posted: Within 3 days
Fixed Price: Not Sure   |  Posted: Aug 27, 2015  |  Ends: 13d, 5h  |   9 Proposals
Need to develop an LED bulb with backup battery inside which will activate itself when the power goes off. No manual switch , no remote, must turn automatically on when the power goes off and if the wall switch is on. Must be able to turn off using wall switch. 900 lumens of light needed. Need 10-14 hours of runtime in good lighting in emergency mode when power goes off.
Category: Electrical       

n****imd
 [?]
Sign in to view client's details.
| n****imd
|    United Arab Emirates
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 27, 2015  |  Ends: 13d, 5h  |   4 Proposals
We require a physics / laser expert to run some calculations and provide some reports for our device. Need to calculate energy density, dosage (this is a medical application) and total power for our existing laser (low power). Please provide your SkypeID so we can interview you.
Category: Electrical       
Skills: Electronics, Physics, Electrical Engineer, laser       

p****one
 [?]
Sign in to view client's details.
| p****one
|    United States
Fixed Price: Less than $500   |  Posted: Aug 27, 2015  |  Ends: 13d, 4h  |   11 Proposals
A chemical coated yarn called black wick is to be wrapped with 10 mm width 18" white tissue. We need to design a mechanism that grips the black wick at both the ends, moves the tissue at 10 degree and grips it, twirls it, and grips the other end also. Attached video shows the manual process.
Category: Mechanical       

f****san
 [?]
Sign in to view client's details.
| f****san
|    India
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 27, 2015  |  Ends: 13d, 2h  |   23 Proposals
Hi, I have with me a PCB design created for me, but I wish to have an consultation with an expert on the design to ensure it is robust enough before I take it to the Gerber design stage. The design is for an Emergency light PCB control which will switch to battery mode when the supply has been cut. Let me know should you be interested and I shall revert with more details. I am fine on hourly rate, but I also wish to chat online and discuss to go thru any doubts. Thank you. Lee Han Pin
Category: Product Design       

H****pin
 [?]
Sign in to view client's details.
| H****pin
|    Singapore
Fixed Price: Not Sure   |  Posted: Aug 27, 2015  |  Ends: 13d, 0h  |   13 Proposals
Need to get a lay out design, architecture, 3D rendering done for a dental office project for a US client. Site CAD drawing available as input. Knowledge in US building codes required. Our client is in the process of remodeling/renovating an existing office (has rooms) to meet dental office requirements (need more rooms).We require 3D models of the proposed redesign/renovation and are also considering the possibility of creating a virtual tour feature that can be uploaded to our website. Prospective Freelancers would have to show competence in Architectural 3D modelling To give some idea on the scope of work 1. Building type: 3800 sf interior 2. No of rooms: 10 3. Toilets & Bath: 2 4. There will be structural changes inside to create more rooms. Deliverable: Models for each room, dental surgical rooms, LAB, sterilization, Dr Rooms Models for passages& corridors Models for reception, waiting lounge,staff lounge We will evaluate proposals based on the following 1) Qualificat...
Category: CAD       
Skills: 3D Modeling, Architecture, AutoCAD       
Preferred Location: India

k****gix
 [?]
Sign in to view client's details.
| k****gix *
|    United States
Fixed Price: Not Sure   |  Posted: Aug 27, 2015  |  Ends: 12d, 18h  |   37 Proposals
I am looking for someone experienced in Solidworks to convert an existing AutoCAD 2D drawing into a 3D drawing. The drawing is of a newly designed irrigation valve and the key that fits into it. A pdf of the 2D drawing is attached for review. The picture in the pdf is a compressed air coupling that the design is similar to the part being designed as a reference. Experience with design of similar products would be helpful. Please provide you experience, estimated cost and time to complete.
Category: 3D Modelling       
Skills: 3D, AutoCAD, SolidWorks       

a****urf
 [?]
Sign in to view client's details.
| a****urf
|    Thailand
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 27, 2015  |  Ends: 12d, 15h  |   5 Proposals
We are an interior design company planning to launch an online shop which specializes in custom carpentry works for interior fixtures. We would like to invite creative designers to come up with designs for fixed size items like TV console, feature wall, bed frames, tables etc. We will be providing the standard sizes and materials to be applied to your design as items will be produced and sold by our company. We are offering a 5% fixed royalty fee on each submitted and approved design we put on sale on our website. Your profile will be featured on the product page of items designed by you. We only accept high quality 3D rendered images and original design. You may submitted as many products as you wish but is subjected to approval. Methods of production should be woodwork, metal or 3D printed. Other materials are permitted but subjected to approval.
Category: Interior Design       

v****ces
 [?]
Sign in to view client's details.
| v****ces *
|    Singapore
Hourly Rate: Not Sure   |  Duration: 1-3 months  |  Posted: Aug 27, 2015  |  Ends: 12d, 14h  |   3 Proposals
Looking for the Hi-Fi Engineer to design an Audio Hi-Fi VU meter with the Following requirements: 9.1 Independent Analog Input Channels, RCA, XLR, Banana, Etc 9.1 Vu Meters/leds ( 1 per input ) Can use a DSP for Functions Like: Input Level, Input Detect: Peak, RMS Dimmer Response Speed. Your Job here will be to design the Electronic Part using from the shelf Components, write code is a plus. NDA and Contract will be required, If interested please send your information for NDA. Project design Price to be determined
Category: CAD       

e****ico
 [?]
Sign in to view client's details.
| e****ico *
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 26, 2015  |  Ends: 12d, 12h  |   21 Proposals
We need a drawing of a curved wireframe that we've already drawn in autocad 3d to be plotted onto approximately (30) PDF full size plots ready to be printed in 1:1 scale on 36" paper. We will give you an autocad file and we need each section of frame to be rotated into a plan view and an elevation view and plotted as a pdf. Please give us an hourly rate an an estimate per finished PDF plot. Thanks for bidding!
Category: CAD       
Skills: 3D Modeling, AutoCAD       

L****ive
 [?]
Sign in to view client's details.
| L****ive
|    United States
Fixed Price: $40 - $50   |  Posted: Aug 26, 2015  |  Ends: 12d, 9h  |   11 Proposals
I need mockups showing exact measurements and features of my cup designs. The final mock up files will need to be production ready. So i can just hand these files over to the manufacture. There will be two versions of this cup design. Both will be the same basic design, style and colors. The only difference in models will take place at the base of the cup. One will have a motor stir. The other will have a secret compartment. So to recap: I need two production sketches and 3d mock up of how the product will look for both versions. Examples of concept sketch:   [obscured]  /search?q=product+concept&espv=2&biw=1280&bih=658&source=lnms&tbm=isch&sa=X&ved=0CAYQ_AUoAWoVChMIp9e-s_LHxwIVCxSSCh2cgg7K#tbm=isch&q=product+concept+sketch Example of concept 3d rendering:   [obscured]  /search?q=product+concept&espv=2&biw=1280&bih=658&source=lnms&tbm=isch&sa=X&ved=0CAYQ_AUoAWoVChMIp9e-s_LHxwIVCxSSCh2cgg...
Category: Product Design       

v****man
 [?]
Sign in to view client's details.
| v****man
|    United States
Fixed Price: Not Sure   |  Posted: Aug 26, 2015  |  Ends: 12d, 8h  |   43 Proposals
I need someone who can make for me a 3D model of an idea i have. I need whatever is needed in order to start a patent and manufacturing. i have attached a basic sketch of what the design should resemble.
Category: 3D Modelling       
Skills: 3D, Manufacturing       

t****093
 [?]
Sign in to view client's details.
| t****093 *
|    United States
Fixed Price: Not Sure   |  Posted: Aug 26, 2015  |  Ends: 12d, 8h  |   14 Proposals
I need someone who can make for me a 3D model of an idea i have. I need whatever is needed in order to start a patent and manufacturing. i have attached a basic sketch of what the design should resemble.
Category: Product Design       

t****093
 [?]
Sign in to view client's details.
| t****093 *
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 26, 2015  |  Ends: 12d, 8h  |   7 Proposals
Start-up company needing services from ideation to production for a beach sandal company. Currently in the initial stages of the process. The beach sandal company will strive to be eco-friendly but fashion forward. We would like to utilize recycled products.
Category: Product Design       

j****v10
 [?]
Sign in to view client's details.
| j****v10
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 26, 2015  |  Ends: 12d, 8h  |   1 Proposal
Start-up company needing services from ideation to production for a beach sandal company. Currently in the initial stages of the process. The beach sandal company will strive to be eco-friendly but fashion forward. We would like to utilize recycled products. We are looking to hire someone that has expertise in finding a manufacturer that fits our needs. We would like to manufacture in the USA.
Category: Product Design       

j****v10
 [?]
Sign in to view client's details.
| j****v10
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 26, 2015  |  Ends: 27d, 7h  |   1 Proposal
We are seeking an individual in Myanmar with a broad knowledge of the business and regulatory landscape across multiple industries (including apparel/footwear manufacturing and IT among others) to serve in a strategic consulting role. Priority will be given to local citizens though highly qualified expats are also encouraged to apply. This is an initial general call to gauge the type of experience candidates can bring to the table. We will contact qualified candidates with more information.
Category: Other - Engineering &...       
Skills: Contract Manufacturing       
Preferred Location: Myanmar

C****sia
 [?]
Sign in to view client's details.
| C****sia *
|    United States
Fixed Price: Less than $500   |  Posted: Aug 26, 2015  |  Ends: 12d, 6h  |   9 Proposals
I need developed complete electronics (populated PCB) as described here:   [obscured]  /controller/ Long term production will be required and I will need a cost per unit/ in volume of 5-10 units but production is NOT a part of this platform. Just the development which includes the design and working test unit. I'll need all paperwork associated with the design. Each time we re-designed we improved the end product substantially. That is why I am making this query. This will be our last improvement (I said that before) so it needs to be done correctly. Note: I have several versions in the worldwide market since 2008 so I know EXACTLY what my costs are. Any/all bullshit will be ignored. I wasn't born last night. Note: This is high school 101 electronics, very simple, uncomplicated. Note: I do NOT want to hear about your qualifications, your team, blah, blah, blah. Either you contact me to get to work or leave me alone! Note: If you have responded previously, you...
Category: Electrical       

a****man
 [?]
Sign in to view client's details.
| a****man
|    United States
Fixed Price: Not Sure   |  Posted: Aug 26, 2015  |  Ends: 12d, 6h  |   31 Proposals
Modelling a perfume bottle and its accessories in order to make it manufacturable for prototyping first.
Category: 3D Modelling       
Skills: SolidWorks       

f****ys_
 [?]
Sign in to view client's details.
| f****ys_
|    France
Hourly Rate: Not Sure   |  Duration: 4-6 months  |  Posted: Aug 26, 2015  |  Ends: 12d, 5h  |   9 Proposals
Seeking a well qualified product development manager for a new product we are developing and will eventually manufacture. We are wanting to work with someone for a defined period of time. Most likely 6 months depending on the providers experience. The provider needs to be self motivating and willing to work between multiple teams and personality types. Good communication, organizational skills, and attention to detail are extremely important. Also, establish ambitious yet realistic deadlines and manage ongoing timelines and deliverables to hit those milestones. Provider needs to have experience with or managing the following areas: Industrial design Mechanical engineering PCB layout Electronic vendor component management. Roadmap development Program/firmware dev. for FPGA Offshore manufacturing Rapid Prototyping Project management. Battery and or power management. Ideally experience with the following: Optics or optical design. Image technology (such as sensors or image capture ...
Category: Contract Manufacturing       
Preferred Location: North America

c****b08
 [?]
Sign in to view client's details.
| c****b08
|    United States
Hourly Rate: Not Sure   |  Duration: 1-2 weeks  |  Posted: Aug 26, 2015  |  Ends: 12d, 5h  |   2 Proposals
Require a project/experiment to be done in human head pose estimation, with kinect camera Using c++/opencv. Estimate the pitch/yaw/roll and perhaps display it. Any one related to computer vision welcome.
Category: Other - Engineering &...       
Skills: C++, OpenCV, Computer vision, Image Processing, Kinect       

k****akr
 [?]
Sign in to view client's details.
| k****akr
|    Ireland
Fixed Price: Not Sure   |  Posted: Aug 26, 2015  |  Ends: 12d, 4h  |   13 Proposals
I am a landscape architect and have created a design for a client that includes a stainless steel portico structure that will overhang the entry stairs of a commercial building. The structure is intended to measure approximately 20' wide X 10' high and is intended to be curved. I anticipated supporting it by 10"X10" stainless posts (or whatever works structurally and visually). The client wants to move forward with the project but I am not a structural designer. I need someone skilled with structural/ architectural experience to figure out the final details of the structure to fit with my plan intent. I need final details for fabrication of the shelter with foundation in AutoCAD so I can finalize the layout and we can get estimates from local fabricators for the structure. You can view a 3D video of the front entry design showing the portico concept here:   [obscured]  /watch?v=9aHewfo2I-I Plan is also attached.
Category: Architecture       

L****ct1
 [?]
Sign in to view client's details.
| L****ct1
|    United States
Fixed Price: Less than $500   |  Posted: Aug 26, 2015  |  Ends: 12d, 3h  |   46 Proposals
I have a logo. I would like it made into 3d parts and combined into an assembly. Just copy the design
Category: 3D Modelling       
Skills: 3D       

h****760
 [?]
Sign in to view client's details.
| h****760
|    United States
Hourly Rate: Not Sure   |  Duration: 1-2 weeks  |  Posted: Aug 26, 2015  |  Ends: 4d, 2h  |   17 Proposals
I need to get drawings made for a small 1000 sq ft manufacturing space that include electrical, HVAC and plumbing. I have a rough drawing that includes placement of equipment as well as power, water and venting requirements.
Category: Other - Engineering &...       
Skills: Engineering drawing       

j****651
 [?]
Sign in to view client's details.
| j****651
|    United States
Fixed Price: Less than $500   |  Posted: Aug 26, 2015  |  Ends: 4d, 2h  |   14 Proposals
We have a camera / scanner that we use in the manufacturing. We need to mount an air nozzle to it to protect the face from the environmental I have attached a sketch in powerpoint as well as the cad of the air nozzle. we are looking for mechanical services for some updates to the retention of the scanner and the air knife retention to the scanner.
Category: Mechanical       

I****ual
 [?]
Sign in to view client's details.
| I****ual
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 26, 2015  |  Ends: 12d, 2h  |   12 Proposals
We require structural calculations and drawings for Building Warrant of a building in Scotland. Full information will be provided by ourselves and the architect on the project, although a very quick turnaround is required. We initially require all calculations for sizes to be able to order beams and columns for the project and will subsequently require full building warrant drawings. The building is an extension to an existing premises and consists of two side walls and a rear wall. There are to be two flats above, sitting on a precast concrete slab. The sizes required urgently are those for the beams and columns which will be holding up the slab and roof. All drawings are copyright and remain the property of myself. The attached drawings are not to be used for any purpose other than tendering for the structural engineering services for this project.
Category: Civil & Structural       

r****145
 [?]
Sign in to view client's details.
| r****145 *
|    United Kingdom
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job