Save this Search
     
Sort by:
  • Posted Date
Posted: Within 7 days
Fixed Price: Not Sure   |  Posted: 19 minutes ago  |  Ends: 14d, 22h  |   0 Proposals
we need an architect to help us with two floor plans and elevations Here attached somes sketches to show you what we want, you can improove it as you like. we will need the project in DWG format( autocad)
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

j****ion
 [?]
Sign in to view client's details.
| j****ion
|    Tunisia
Fixed Price: Less than $500   |  Posted: 30 minutes ago  |  Ends: 14d, 22h  |   5 Proposals
Design a cylinder for 3d printing that is 200 mm wide and 300 mm in length, with a simple open valve at the bottom to couple up a fuel supply. I just need the 3d design not actual printed. The walls on the cylinder would be 3 mm.
Category: 3D Modelling       
Skills: 3D, 3D Printing       

P****r40
 [?]
Sign in to view client's details.
| P****r40
|    United Kingdom
Fixed Price: Not Sure   |  Posted: 35 minutes ago  |  Ends: 14d, 22h  |   0 Proposals
Design Engineer - JD Desired Candidate Profile, Experience and Skills required: ? 3 ? 5 years of experience in CATIA V5 software with Product Design Development. ? Experience in Automotive industry for Product Design and Development ? Experience in Design verification and validation activities ? Prepare layouts, design & make engineering drawing with all specifications ? Work on Design Concept Development, Modeling, Drafting, DFMEA, Design calculations ? Good knowledge of GD&T and Stack-Up concepts and its application ? Good Knowledge of Product development process and product life cycle ? Preparing job estimation, timing plan, and project planning ? Ability to read, understand and interpret Engineering Drawings and Engineering Design solutions ? Should be able to meet customer quality and delivery requirements ? Proficiency in MS office tools, PowerPoint and MS Excel Other requirements: ? Good spoken and written communication a must ? Good attitude and discipline essent...
Category: CAD       
Preferred Location: India

P****ati
 [?]
Sign in to view client's details.
| P****ati
|    India
Hourly Rate: $4 - $5 / hr   |  Duration: Not Sure  |  Posted: 44 minutes ago  |  Ends: 9d, 22h  |   1 Proposal
Hello, and thanks for viewing my posting. My company is using the service "Unbounce" to capture leads, and we need to post these leads to our Microsoft Dynamics CRM in real time. Currently we can only receive them via email. There are two options to succesfully do this, which are a little beyond my coding knowledge: 1. Unbounce offers a "webhook" integration, that can post the leads to any URL you provide. We tried this and couldn't get it to work. 2. Forward the leads that are currently coming to our email, and post them to the CRM. Again, this job is to take our leads that include name, phone, and email and have them automatically post to our CRM (dynamics). If you are not familiar with dynamics and couldn't provide the fix in a day please do not apply. Thank you!
Category: Mechanical       

v****ebe
 [?]
Sign in to view client's details.
| v****ebe
|    India
Hourly Rate: $15 - $20 / hr   |  Duration: 1-2 weeks  |  Posted: 47 minutes ago  |  Ends: 14d, 22h  |   0 Proposals
Hi Guys, I have re-posted this project in a different format due to not being able to obtain the appropriate freelancers previously. I require a suitably qualified and well experienced CAD/Solidworks etc etc designer to design custom plastic and injection moulded covers for us upon request. We currently have several products and material that we require a designer to put this into a design program and design our products also so as we can send these designs directly to the manufacturer to manufacture. This will be ongoing work and we require highly experienced freelancers and the work must be to the highest of quality and standards. Good luck bidding and look forward to getting this project rolling! Regards, Nick
Category: CAD       

N****089
 [?]
Sign in to view client's details.
| N****089
|    Australia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 1h, 7m ago  |  Ends: 14d, 21h  |   0 Proposals
Hello, I am looking for someone to help me formulate a nutritional supplement using some specific ingredients. I know which ingredients I want to use. These ingredients work well when given intravenously. However the ingredients have very poor bio-availability. They are broken down by digestive acids, and are not absorbed into the cells and therefore do not work when taken orally. I am looking for a pharmacist with specific knowledge in nano-formulation and bio-availability to help me formulate the ingredients in a way so that they DO work well orally. Hopefully you will have experience in managing product development / manufacturing of pharmaceutical, supplements and cosmetic products. If you have access to a LAB and materials, please also let me know, as this will give you a significant advantage for this project.
Category: Chemical Engineering       

m****z87
 [?]
Sign in to view client's details.
| m****z87
|    Australia
Fixed Price: Less than $500   |  Posted: 1h, 30m ago  |  Ends: 14d, 21h  |   4 Proposals
Hi there, I am looking for someone to help put a construction drawing together for a green house we want to build. We want to pass the drawings to the company who will help modify the Arches required. Please see attached sample image.
Category: Civil & Structural       

p****ver
 [?]
Sign in to view client's details.
| p****ver
|    South Africa
Fixed Price: Not Sure   |  Posted: 1h, 38m ago  |  Ends: 14d, 21h  |   0 Proposals
Hello, I am looking for someone to help me formulate a nutritional supplement using some specific ingredients. I know which ingredients I want to use. These ingredients work well when given intravenously. However the ingredients have very poor bio-availability. They are broken down by digestive acids, and are not absorbed into the cells and therefore do not work when taken orally. I am looking for a pharmacist with specific knowledge in nano-formulation and bio-availability to help me formulate the ingredients in a way so that they DO work well orally. Hopefully you will have experience in managing product development / manufacturing of pharmaceutical, supplements and cosmetic products. If you have access to a LAB and materials, please also let me know, as this will give you a significant advantage for this project.
Category: Chemical Engineering       

m****z87
 [?]
Sign in to view client's details.
| m****z87
|    Australia
Fixed Price: $100 - $200   |  Posted: 1h, 54m ago  |  Ends: 6d, 21h  |   1 Proposal
We need plumbing plans for a 2-family house (2,200 sq ft)- Cellar, 1st Floor, 2nd Floor. Please see the floor plans attached. We need someone who knows New York City codes. Our deadline is on Wednesday 03/04/15. Please respond only if you can provide a work sample and if you are well versed with NYC standards.
Category: CAD       
Skills: Architecture, AutoCAD, AutoCAD 2012       

c****ite
 [?]
Sign in to view client's details.
| c****ite
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 2h, 5m ago  |  Ends: 14d, 20h  |   0 Proposals
Jouw takenpakket: - Je bent verantwoordelijk voor het ontwerp van de inrichting van een nieuw kantoorgebouw, bovendien stuur je het ontwerpteam aan. - Als (interieur-) architect maakt je ontwerptekeneningen op en eventueel in 3D tekeningen - Je leidt de ontwerpvergaderingen en maakt de verslagen op.
Category: Interior Design       
Skills: AutoCAD       

E****ium
 [?]
Sign in to view client's details.
| E****ium
|    Netherlands
Hourly Rate: $10 - $15 / hr   |  Duration: 1-2 weeks  |  Posted: 3h, 30m ago  |  Ends: 14d, 19h  |   20 Proposals
Luxury Villa architecture project based in switzerland. A luxury villa located in the suburbs of the Geneva area. For this project I need 3D modeling and rendering from floorplans and elevation of interior and exterior views of the villa with its garden. Looking for poetic and emotional sense to give the client a real dreamy, photorealistic feel of his future home. Will send all the plans and elevation details after agreement.
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD, 3D Rendering       

j****e20
 [?]
Sign in to view client's details.
| j****e20
|    Switzerland
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 3h, 47m ago  |  Ends: 1d, 20h  |   12 Proposals
I need to simplify a STL model. The part is casted, holes can be removed. The final result must be a STEP, Parasolid or NX file.
Category: 3D Modelling       
Skills: 3D, Reverse Engineering       

e****865
 [?]
Sign in to view client's details.
| e****865
|    Norway
Fixed Price: About $20   |  Posted: 4h, 15m ago  |  Ends: 1d, 19h  |   6 Proposals
This job is a test helping me finding a creative Elancer for the rest of this and many future projects. Im looking for creative solutions for 2-apartment building. The job is to deliver at least 2 rough sketches of alternative floorplan solutions for each floor. This house was originally designed for my family to live in. We have now decided that it is better for us to build it as 2 apartments to and sell them . So the idea is to make the apartments attractive to many potential buyers offering most value at the least cost.. The apartments should be suitable for familes with 2 children but a plus could be possibility to remove a wall to have larger social area instead of a bedrom. Approach: Keep the exterior outline but treat interior as a blank slate to get creative. There will be no inside stair. There is nice scenery to NE so good to put living room there. Terrain: As shown in elevations the the 1st floor is souterrain. Plans were to refill agains the SE wall. Now i think it...
Category: Architecture       
Skills: Architecture       

k****thh
 [?]
Sign in to view client's details.
| k****thh
|    Sweden
Hourly Rate: $5 - $10 / hr   |  Duration: Not Sure  |  Posted: 5h, 40m ago  |  Ends: 9d, 17h  |   0 Proposals
Hello, and thanks for viewing my posting. My company is using the service "Unbounce" to capture leads, and we need to post these leads to our Microsoft Dynamics CRM in real time. Currently we can only receive them via email. There are two options to succesfully do this, which are a little beyond my coding knowledge: 1. Unbounce offers a "webhook" integration, that can post the leads to any URL you provide. We tried this and couldn't get it to work. 2. Forward the leads that are currently coming to our email, and post them to the CRM. Again, this job is to take our leads that include name, phone, and email and have them automatically post to our CRM (dynamics). If you are not familiar with dynamics and couldn't provide the fix in a day please do not apply. Thank you!
Category: Contract Manufacturing       

v****ebe
 [?]
Sign in to view client's details.
| v****ebe
|    India
Fixed Price: $500 - $1,000   |  Posted: 7h, 42m ago  |  Ends: 14d, 15h  |   2 Proposals
I need a design and advice on what materials to use in building an internal frame inside a brick barn. I need the current design analysed as well.
Category: Civil & Structural       

R****han
 [?]
Sign in to view client's details.
| R****han
|    Australia
Fixed Price: Not Sure   |  Posted: 8h, 39m ago  |  Ends: 14d, 14h  |   5 Proposals
Hi, I am looking for electronic product tester. Product needs to test on PC and iPhone/iPad. This will be initial sample testing may be for 1 day. We will provide basic training. You need to visit factory in Nanshan, Shenzhen. China Only for locals
Category: Other - Engineering &...       

p****pro
 [?]
Sign in to view client's details.
| p****pro
|    United States
Fixed Price: Less than $500   |  Posted: 9h, 7m ago  |  Ends: 14d, 13h  |   3 Proposals
I require a sourcing expert familiar with Taiwan, China, Alibaba, Global Sources or other manufacturing services/directories to help me with an RC car with a flag pole attached to it. Very simple design. Ideal cost per unit is $20-$40 each. Pole must be like this and removable:   [obscured]  /Levolor-Oval-Spring-Tension-Rod/dp/B00004Z0JS/ref=pd_sim_hg_3?ie=UTF8&refRID=0TE8NXQG1HK2BHC4FPDR I am looking for between 5-20 units for a market test run and then more as business picks up. 3D design available. Prototype being assembled.
Category: Contract Manufacturing       

A****h21
 [?]
Sign in to view client's details.
| A****h21
|    Canada
Fixed Price: $150 - $350   |  Posted: 9h, 40m ago  |  Ends: 14d, 13h  |   4 Proposals
Ok I have in mind a device that I have a vision for. The technology, potentially, could be used for many applications. I have one idea right now that would form the basis of design. **note this product involves electronic components such as market available GPS module / antenae. I am willing to pay to get a very good product, however it will be broken into sections, each with various weighting in progress payments. Meaning, no point paying the full amount only to find it isn't feasible. So I propose the following overall breakdown : 1. Investigate Phase - Investigate the components I propose or suggest alternates, with regards to achieving the specified outcome. Investigate any patents (freedom to operate), or potential for patenting this idea. Provide feedback as to whther the idea will work from a technical standpoint, and approximate costings of components, with basic design and manufacture approach. (In a nutshell, can my vision become reality with components currently availabl...
Category: Electrical       

N****L83
 [?]
Sign in to view client's details.
| N****L83
|    Australia
Fixed Price: $500 - $1,000   |  Posted: 9h, 42m ago  |  Ends: 14d, 13h  |   7 Proposals
Looking for a very talented architect and 3d modeller for the following scope of work: No. 2 new conceptual design in plan view and isometric, low resolution rendering 4 rendering for the designed approved elevations with textures with measurements and floor plan with measurements list of material study used in the design and of course space for revisions as you know stunning final presentation with all view and textures etc.I will need also the CAD FILES The job will be developed in phase so the priority right now is to have No. 2 design concept for a jewellery kiosk Ideas for the visual style: CONTEMPORARY - MINIMALIST Preferred colors: WHITE Extra notes: THE JOB IS VERY URGENT - THE PHASE 1 CONCEPTUAL DESIGN
Category: CAD       
Skills: Adobe Photoshop, 3D Modeling, AutoCAD       
Preferred Location: Western Europe, Eastern Europe, Middle East & Central Asia, Central & South America

m****ano
 [?]
Sign in to view client's details.
| m****ano *
|    Canada
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: 10h, 42m ago  |  Ends: 14d, 12h  |   4 Proposals
LOOKING FOR A TALENTED ARCHITECT FOR CAD AND PHOTOSHOP FINAL STUNNING PRESENTATION AND TECHNIQUES INFO WILL FOLLOW SEPARATELY
Category: CAD       

m****ano
 [?]
Sign in to view client's details.
| m****ano *
|    Canada
Fixed Price: Not Sure   |  Posted: 10h, 54m ago  |  Ends: 14d, 12h  |   5 Proposals
We are looking for some one good in math,like integration and more to tutor online.If you are interested feel free to contact us on skype at Thank you
Category: Other - Engineering &...       

r****ssa
 [?]
Sign in to view client's details.
| r****ssa
|    United States
Fixed Price: Less than $500   |  Posted: 10h, 56m ago  |  Ends: 14d, 12h  |   3 Proposals
I am looking for someone to help me source Chinese electronics (headphones) manufacturers so I can find someone to produce my product. Please respond if you have experience with this.
Category: Product Design       
Skills: Product Design, sourcing       

j****ham
 [?]
Sign in to view client's details.
| j****ham
|    Canada
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 11h, 0m ago  |  Ends: 14d, 11h  |   4 Proposals
Steel estimator for doing take off from tender drawings in structural steel package. This will include all hot rolled and cold rolled sections, holing, welding and connection details in a spread sheet. You should be able to detail and produce Tekla drawings. This is on ongoing role for the right person. Send your expressions of interest and hourly rate
Category: 3D Modelling       

h****ley
 [?]
Sign in to view client's details.
| h****ley
|    Australia
Fixed Price: $25 - $75   |  Posted: 11h, 58m ago  |  Ends: 14d, 11h  |   7 Proposals
Looking to create a model:   [obscured]  /42contemp.jpg   [obscured]  /photos/TOY%20SOLDIER%20JUMBO%20CRANE.JPG Must be 8 total parts then complied into an assembly. Complex parts. The claw itself must move when the joystick is moved. The claw I would like is:   [obscured]  /wp/wp-content/uploads/2010/09/Claw-Game-Model0163.jpg   [obscured]  /uploadfile/WebEditor/2012229223925141.jpg Again, 8 total parts. Then put together in an assembly.
Category: 3D Modelling       
Skills: SolidWorks       

b****123
 [?]
Sign in to view client's details.
| b****123 *
|    United States
Fixed Price: $25 - $45   |  Posted: 12h, 44m ago  |  Ends: 14d, 10h  |   5 Proposals
NOTE: this is for 2 solidworks models. 1 part file each. First: The following syringe needs to be modeled as 1 part. ONLY 1 part. Please simplify where necessary. I expect certain features to be on the part. Must be easily doable in 1-2 hours.. bbbburns.com/blog/uploads/Background/Syringes_by_JOE02151.jpg   [obscured]  /images/Anesthesia/Syringe_1.gif   [obscured]  /images/syringe.jpg Second:   [obscured]  /z/dental-syringe-13272671.jpg   [obscured]  /files/big-dentist-needle.jpg   [obscured]  -solutions.co.uk/catalog/images/Dental%20cartridge%20syringe%20sq.JPG Please make sure these parts are well done.
Category: 3D Modelling       
Skills: SolidWorks       

b****123
 [?]
Sign in to view client's details.
| b****123 *
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job