Save this Search
     
Sort by:
  • Posted Date
Posted: Within 7 days
Hourly Rate: $30 - $40 / hr   |  Duration: Not Sure  |  Posted: Mar 30, 2015  |  Ends: 13d, 17h  |   57 Proposals
Need 3D design of an 8 port plastic air connector from customers hand drawing concept. Some pictures are available.
Category: Mechanical       

i****dge
 [?]
Sign in to view client's details.
| i****dge
|    United States
Fixed Price: $500 - $1,000   |  Posted: Mar 30, 2015  |  Ends: 13d, 17h  |   5 Proposals
I would like to take my chemical mix and create a powder form. I currently mix a couple "store bought" products to create a product that works for me and what I need to do. I am yet to find a product that works as well as this one. The goal is to make a powder form in order to create easy portioning and mixing. If this works out, I will possibly be looking for another product to be made... in the same field.
Category: Chemical Engineering       
Skills: Chemical Engineering       

m****002
 [?]
Sign in to view client's details.
| m****002
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 30, 2015  |  Ends: 13d, 16h  |   12 Proposals
PLEASE READ THE ENTIRE LISTING FOR CONSIDERATION Looking for someone with significant Civil Engineering experience. PE license not necessary but the ability to take a project from concept to completion with minimal instruction/supervision is a huge plus. Familiarity with drainage reports and stormwater also a plus. The ideal candidate has their own licensed version of Civil 3D. Must be able to get work done quickly and follow CAD standards. If you do not have significant experience using CAD on construction projects in the Civil field, please do not apply. PLEASE ONLY APPLY IF YOU HAVE CIVIL ENGINEERING EXPERIENCE. I am not interested in architectural, structural, or mechanical work. You must have experience with Civil Design and Engineering and be able to show projects you have done.
Category: Civil & Structural       

p****ton
 [?]
Sign in to view client's details.
| p****ton
|    United States
Hourly Rate: $15 - $20 / hr   |  Duration: 1-2 weeks  |  Posted: Mar 30, 2015  |  Ends: 13d, 16h  |   9 Proposals
I need a detailed 3D rendering of the wood framing members (structure) to include trusses and all interior partition walls and structural components (and straps and hold downs). I am a developer and general contractor. I have design consultants that generate construction plans to build. I'd like to "build it before I build it", in a 3D model. This person must know about carpentry and framing to effectively provide the output I need. Once we have the framing, we will then add other trades to the model, MEP and fire sprinklers. I will use this model with my field leadership team and walk thru it with the actual sub that will complete the work. See the pictures attached of a more complicated part of the project, a clubhouse that involves commercial applications as well as residential. I currently have the free version of Sketch up and want to be able to navigate the model at will, once it is complete. I do not need a designer but a modeler of a design. We wood frame just ab...
Category: 3D Modelling       
Skills: 3D Modeling, Architecture       

s****ier
 [?]
Sign in to view client's details.
| s****ier
|    United States
Fixed Price: $20 - $60   |  Posted: Mar 30, 2015  |  Ends: 13d, 16h  |   5 Proposals
anyone with the following experience would be able to work on this project: - Vocal Pitch correction ( by note if necessary ) - Vocal tuning (smooth tuning without T-pain effect (no robotic sounds) ) - Mixing and Mastering - Lead Vocal Effects - Chorus Effects - Layering & panning Vocals - Eliminating the Noise from all tracks - Mastering the Final result in a HQ Audio track.
Category: Other - Engineering &...       

a****kha
 [?]
Sign in to view client's details.
| a****kha
|    Saudi Arabia
Fixed Price: $20 - $30   |  Posted: Mar 30, 2015  |  Ends: 13d, 16h  |   5 Proposals
I have a question about diagonally-dominant matrices. I have a diagonally-dominant matrix of a certain structure, and I need to prove a certain property of its inverse. The question is in the PDF file attached. I am looking for the right technique to prove the result described in the document.
Category: Other - Engineering &...       

c****999
 [?]
Sign in to view client's details.
| c****999
|    Switzerland
Fixed Price: $1,000 - $5,000   |  Posted: Mar 30, 2015  |  Ends: 13d, 15h  |   15 Proposals
I'm looking for an engineer to help me refine and further develop a prototype for an elaborate phone holder consisting of metal and plastic parts and then produce 100 units for an initial market test. If you are a engineer/designer and have a manufacturing warehouse in Southern California, this would be ideal.
Category: Product Design       

K****j23
 [?]
Sign in to view client's details.
| K****j23
|    United States
Fixed Price: Not Sure   |  Posted: Mar 30, 2015  |  Ends: 13d, 13h  |   22 Proposals
Hi, We need a professional 3D designer who has extensive experience in designing jewelry to work with us on creating new pendant designs and files to send to the manufacturer for production. You will be required to sign a NDA form. All files and designs created will be sent to us via email (or other) as projects are completed. Our line of jewelry is made of pewter or stainless steel. The pendants are similar to lockets so you must have experience in designing pendants that open up to show the inside and holes or cut-outs which may be in the front and back of the pendant. Important: We want someone who has experience and can give us their suggestions as well as take our ideas/pictures and turn it into something unique on their own. This project is for the first pendant design. If we are satisfied with the work, we will have several more designs to follow. Thank you and looking forward to working with the winning bidder! Chris
Category: CAD       
Skills: 3D Modeling, AutoCAD, Rhinoceros 3D, SolidWorks       

i****rks
 [?]
Sign in to view client's details.
| i****rks
|    United States
Fixed Price: $400 or less   |  Posted: Mar 30, 2015  |  Ends: 13d, 13h  |   14 Proposals
I need a 3d animation of an orphanage we are building. This is a charity project so the budget is limited. I have all the architects plans and video of the building. It would need to be a walk-through of what the building will look like once finished.
Category: 3D Modelling       

s****e13
 [?]
Sign in to view client's details.
| s****e13
|    United States
Fixed Price: Less than $500   |  Posted: Mar 30, 2015  |  Ends: 13d, 12h  |   7 Proposals
it is solar energy coursework ...It is estimated that Glasgow will need 3.2 x 107 MWh per year of electricity in 2017. A plan to meet this demand completely by solar energy is to be evaluated. Assume fixed solar panels of efficiency 20% and the ground reflection (albedo) to be 0.2. 1. Find the ideal tilt and azimuth angle for Glasgow. 2. What is the average daily electricity demand? 3. Which day of the year has the lowest number of daylight hours? How many hours of daylight are there on that day? 4. Between the sunrise hour angle and sunset hour angle, using an Excel spread sheet calculate at equal steps of 7.5o hour angles: (a) The zenith angle. (b) The angle of incidence. (c) The global irradiance. (d) The total irradiance. (e) The time average of the total irradiance (f) The answer from (e) multiplied by the number of daylight hours. 5. Find the total area of solar photovoltaic that would be required to meet the demand on this day. Write a brief report (approx. 1500 words plus any o...
Category: Mechanical       

A****888
 [?]
Sign in to view client's details.
| A****888
|    United Kingdom
Fixed Price: $40 - $100   |  Posted: Mar 30, 2015  |  Ends: 13d, 12h  |   9 Proposals
Project for Company specializing in product designs for small unmanned aircraft. Basic Hire Qualifications Work is done as an independent contractor Must sign a non-disclosure agreement Must sign a contract related to the specifications of the contract Minimum of a bachelors degree in Engineering or 3D design Minimum of one year experience with developing projects using CAD or other compatible software. Highly proficient in working on deadlines, is reliable, dependable and can meet the demands of highly skilled projects. Project involves: Developing a 3D design for a tethering cord for a small unmanned aircraft. Qualifications: Understands the project requirements and develops high quality designs. Develops design layouts for this project using 3D software Uses creativity and originality to develop a unique product Develops primary sketches and models for final selection of product design Selects appropriate materials, engineering standards and parts for project. Presents designs...
Category: Product Design       

d****ARS
 [?]
Sign in to view client's details.
| d****ARS
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: Mar 30, 2015  |  Ends: 13d, 12h  |   2 Proposals
Our President will be based in or near Ho Chi Mihn city for several months this year and we have a we are pursuing: a. to design and build v1.0 of a consumer product that requires sending a wireless signal(s) after being knocked off of a table. Either a gyroscope or accelerator should initiate the process. Later versions will have a special cover, voice-activation, and more. If we can find a good partner in Vietnam, then the project(s) will get started now and continue while our President is based there, as needed. We hope to develop long term relationships for many projects in the future. Regards
Category: Other - Engineering &...       
Preferred Location: Vietnam

S****r17
 [?]
Sign in to view client's details.
| S****r17
|    United States
Fixed Price: Less than $500   |  Posted: Mar 30, 2015  |  Ends: 13d, 11h  |   3 Proposals
As you know, big box stores demand very low cost electronic gadgets. Often consumers will enjoy using an electronic gadget for a few minutes, and then will discard the gadget. Dichroic lcds require voltages > 9V. 9V driver chips are expensive, and chips suitable to drive 3V TN lcds will not handle voltages greater than 5V or 6V. I want you to write up a basic BOM. After I approve BOM, you can also make the schematic and gerbers. I need you to be creative, to "put your thinking cap on", and suggest a VERY LOW COST pcba to drive a single dichroic lcd pixel off and on, like a simple flasher circuit. The precision of the timing of the flashing off and on is not important. Square wave is best but not required. Direct drive is OK, but a multiplexing rate of 16 flashes per second or 32 flashes per second reduces battery consumption substantially. If a pcba with direct drive is lower cost than a pcba with multiplexing, I would prefer a direct drive pcba. For example, in...
Category: Electrical       
Skills: Electronic Design, Gerber       

a****gel
 [?]
Sign in to view client's details.
| a****gel
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 30, 2015  |  Ends: 58d, 10h  |   3 Proposals
Custom APP for input and computation of 3D geometry including horizontal, vertical and slope distances of triangulated points measured in the field from a baseline. Requires 2D display of outline, slopes and dimensions, including area, perimeter and diagonals, for mobile smartphones, and notebooks. Encrypted transmission of data to host only. English fluency required.
Category: Product Design       
Preferred Location: United States

j****den
 [?]
Sign in to view client's details.
| j****den
|    United States
Fixed Price: Less than $500   |  Posted: Mar 30, 2015  |  Ends: 13d, 10h  |   1 Proposal
Chemist needed to remove ionic contaminants from laboratory grade dyes from Aldrich, Fisher, etc. We need to purify dyes to an electical resistivity of about 10 - 12 megohms.
Category: Chemical Engineering       
Skills: Chemistry       

a****gel
 [?]
Sign in to view client's details.
| a****gel
|    United States
Fixed Price: Not Sure   |  Posted: Mar 30, 2015  |  Ends: 13d, 10h  |   13 Proposals
I have a residential construction project in South Florida that will be starting in the next 45 days. I am looking for a complete take off that will provide accurate material calculations and quantities for each phase of the job. The home is 3800 Sqaure feet on 2 floors. We are starting at the dirt and going up from there. In order for this job to go to plan your material list should be detailed and accurate. Can you calculate the amount of CMU needed? Can you calculate the yardage needed of concrete for each phase? I have the plans in pdf form as well
Category: Other - Engineering &...       
Skills: 3D Modeling, Building Estimation       
Preferred Location: North America

t****ion
 [?]
Sign in to view client's details.
| t****ion
|    United States
Fixed Price: Less than $500   |  Posted: Mar 30, 2015  |  Ends: 13d, 10h  |   5 Proposals
My 3D Studio Max artist has created an animated character in Max (a man-eating plant) which now needs to be re-animated in Maya. I need someone with previous experience converting files between both applications to carry out this file conversion. The modelling, textures, mapping, rigging and animation needs to be preserved in the resulting Maya compatible file.
Category: 3D Modelling       
Skills: 3D, 3ds Max, Maya, 3D Modeling, 3d Animation       

N****ato
 [?]
Sign in to view client's details.
| N****ato
|    United Kingdom
Fixed Price: Less than $500   |  Posted: Mar 30, 2015  |  Ends: 13d, 9h  |   10 Proposals
Looking for someone to run an regression analysis on a few data sets and interpret the results. Note that the data are parameter inputs and outputs and results from welding samples during a controlled study. Would like estimated quote prior to starting work.
Category: Other - Engineering &...       
Skills: Microsoft Excel, regression analysis       

A****ape
 [?]
Sign in to view client's details.
| A****ape
|    Canada
Hourly Rate: $10 - $15 / hr   |  Duration: 1-2 weeks  |  Posted: Mar 30, 2015  |  Ends: 13d, 8h  |   1 Proposal
Create the geometry of a rectangular Tank,dimesntions are Length = 1m Breath = 0.1 m Height = 0.98 m Simulate sloshing using Star CCM+ of membrane tank with swash bulkhead .The tank will be move in sway direction (left and right) which will cause the water inside the tank to slosh. Using VOF method, gravity, multiphase and VOF waves to set the ratio of air and fluid (just a suggestion). The boundary will be all walls as the fluid inside the tank is fixed. Similar Video:   [obscured]  /watch?v=LlkzyV7j3GE Thanks.
Category: Other - Engineering &...       

h****bin
 [?]
Sign in to view client's details.
| h****bin
|    Italy
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 30, 2015  |  Ends: 13d, 8h  |   2 Proposals
Necesitamos ingenieros electronicos de Peru para diseñar mainboards para un proposito especifico , que tengan mucha práctica/conocimiento en construir/reparar/modificar placas madre.
Category: Electrical       

k****ton
 [?]
Sign in to view client's details.
| k****ton *
|    Peru
Fixed Price: Not Sure   |  Posted: Mar 30, 2015  |  Ends: 5d, 8h  |   17 Proposals
I am looking for a designer and draftsman who is familiar with residential new construction homes in the Midwest area, Minnesota based. The idea person would have: 1) Knowledge in the building industry and residential new construction. 2) A designer that can contribute ideas and floor plans when I run out of ideas 3) Be able to supply 2D and 3D models 4) Would prefer to have someone be able to assist with material take-off lists (based on the 2D/3D model created use that to calculate materials like siding, roofing, base board, case, flooring, etc...). 5) Supply cabinet layouts and elevations (not 20/20 views just general for the cabinet makers to know the space they are working in). 6) Work with tight homeowner deadlines and work with me on plan changes. 7) Proficient in English language, both spoken and written. Good communication skills and planning. 8) MUST BE ABLE TO SUPPLY CONSTRUCTION DRAWINGS to submit to the city for permits, however, in the state of MN they are no...
Category: Architecture       
Skills: 3D, 3D Modeling, Architecture, AutoCAD, 3D Design       
Preferred Location: United States

M****mes
 [?]
Sign in to view client's details.
| M****mes
|    United States
Fixed Price: $500 - $1,000   |  Posted: Mar 30, 2015  |  Ends: 13d, 7h  |   17 Proposals
We are looking for a creative agency to work with us on the concept and design for an upcoming event for one or our clients. The requirements are as follows: 1. Design for entrance 2. Design for main hall including but not limited to backdrop and branding We will provide you with the hall drawings for us to replicate and create the designs within the layout provided. Thanks K
Category: Interior Design       

k****jid
 [?]
Sign in to view client's details.
| k****jid
|    United States
Fixed Price: Less than $500   |  Posted: Mar 30, 2015  |  Ends: 13d, 7h  |   28 Proposals
Hello, Please let me know first on how many square meter is the villa at the link below and if I can apply the same (or a bit smaller of the same) design on a land of 200 square meter. Please quote me your fee for the design of the villa at the link below:   [obscured]  /phuket-holiday-rental.php?nom=Modern%20Villa Thank you.
Category: Architecture       
Skills: 3D Modeling, ArchiCAD, Architecture       

g****dia
 [?]
Sign in to view client's details.
| g****dia
|    United States
Fixed Price: Not Sure   |  Posted: Mar 30, 2015  |  Ends: 13d, 7h  |   6 Proposals
This is a PCB design job. And I want you to use PADS for both schematic and layout design. The PCB is a PCIe card. I'm going to use the XR17V352 (PCIe-UART bridge) for PCIe interface. And the UART will be connected to microZED module. Simply say, This is for giving PCIe interface to microZED through UART interface. I want 2 UART connection to be connected between PCIe and microZED. I can't give you more information of XR17V352 because I couldn't find a reference schematic of it. And I want you to have some knowledge about the Zynq which is the SoC on the microZED because you need to understand it how to make the UART connection. It is basically nothing but a PCIe to UART bridge circuit attaching microZED carrier to the UART interface. So I want it cost effective, i.e. 2-layer design.
Category: Electrical       

W****m88
 [?]
Sign in to view client's details.
| W****m88
|    Korea, Republic of
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 30, 2015  |  Ends: 13d, 6h  |   9 Proposals
I am looking for an electrical engineer to design an electrical control box for an oven. I will need detailed specifications that I can use for taking in offers for parts and/or a fully assembled control box. Delivery is a list of components and schematics for wiring. We will only be making a few of this machine at this time, so I think it would be better to use PLC:s rather than PCB:s. The box will control one motor and two heating element arrays. The motor will need adjustable speed and soft start. The motor will also work and pause in intervals. The element arrays will be controlled individually and by a common thermostat. The elements will also be controlled with a timer. The machine will need an emergency kill-switch that turns everything(motor&elements) off Attached is a schematic representation of our system and our needs
Category: Electrical       

a****zzz
 [?]
Sign in to view client's details.
| a****zzz
|    Sweden
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job