Save this Search
     
Sort by:
  • Posted Date
Fixed Price: $100 - $150   |  Posted: 21 minutes ago  |  Ends: 14d, 23h  |   0 Proposals
conduct a cfd simulation and analysis on bicycle wheels USING STAR CCM attached below. the simulation is limted to just the wheels(front and rear), the frame is just there to support the wheels. the drag and side forces should be calculated. star ccm+ 8.04.007-R8 for window 64 should be used for the project. all graphs and processes used to achieve the result should be sent. compare the results on the wheels and illustrate which wheel is the best in terms of aerodynamics. ALSO SCREEN MUNCH THE PROCESS SETTING THE PHYSICS.
Category: CAD       
Skills: SolidWorks, star ccm       

v****kii
 [?]
Sign in to view client's details.
| v****kii
|    United Kingdom
Hourly Rate: $15 - $20 / hr   |  Duration: 3-4 weeks  |  Posted: 2h, 2m ago  |  Ends: 89d, 21h  |   1 Proposal
I use the Autodesk software AutoCAD 2014 for architectural and building drawings. My work is accuracy and understandable anyone can interpret my drawings. I like to work honestly and on given time. All work is on my capability and my effort.
Category: CAD       
Skills: 3ds Max, AutoCAD, AutoDesk Revit       

j****try
 [?]
Sign in to view client's details.
| j****try
|    Tanzania, United Republic Of
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 2h, 56m ago  |  Ends: 14d, 21h  |   1 Proposal
Mechanical Engineer needed to support in the development of alternative energy concept. Key tasks will be: - Concept validation - 3D design - Engineering calculations Must be willing to sign an NDA. Duration dependant on concept success but could be long term.
Category: 3D Modelling       
Preferred Location: United Kingdom

A****erv
 [?]
Sign in to view client's details.
| A****erv
|    United Kingdom
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 3h, 12m ago  |  Ends: 14d, 20h  |   1 Proposal
Carrage system with two wheels and two gears very simple design needs to be developed into working drawings and 3D design.
Category: 3D Modelling       
Skills: 3D, 3D Modeling, 3D Design       
Preferred Location: Australia

m****acy
 [?]
Sign in to view client's details.
| m****acy
|    Australia
Fixed Price: $20 - $70   |  Posted: 3h, 57m ago  |  Ends: 2d, 20h  |   1 Proposal
I need this by Wednesday so let me know if you can do it. I will pay $60 for all of it. If you can only do a certain problem, let me know which ones you can do and I will pay accordingly for it. Everything you need for the assignment is available in this folder --   [obscured]  /s/bjsm6iu6ojq4tap1f3fv All class session notes are available at --   [obscured]  /s/6zwnu0c15vbtsu6gb3gp let me know if you can do this by Tuesday... If you can do this, I will have more stuff in Machine Learning for you! :)
Category: Other - Engineering &...       

i****123
 [?]
Sign in to view client's details.
| i****123
|    United States
Hourly Rate: Not Sure   |  Duration: 1-2 weeks  |  Posted: 5h, 30m ago  |  Ends: 14d, 18h  |   5 Proposals
Trash can for the bed of a pick-up truck. easy install, removable, standard size for trash bags, cover for rain, drainholes, universal install, or possibly specific to certain trucks.
Category: Product Design       

m****885
 [?]
Sign in to view client's details.
| m****885
|    United States
Fixed Price: $75 or less   |  Posted: 5h, 42m ago  |  Ends: 14d, 18h  |   4 Proposals
Looking for someone to create a basic floor plan in Revit from the attached file. Will NOT include any color renderings of interior or exterior. Just basic floor plan layout with 3 floor plan design revisions. Manoj
Category: CAD       
Skills: AutoCAD, AutoDesk Revit, floor plan design       

s****ion
 [?]
Sign in to view client's details.
| s****ion
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: 6h, 37m ago  |  Ends: 14d, 17h  |   4 Proposals
Our functional board must be resized for a new enclosure. Aspects of the design, such as power supply, are to be verified and improved where necessary. Our objective is to obtain a commercially viable board suitable for our consumer product. There should be an option to allow the device to be operated remotely via a blue tooth or WiFi module.
Category: Electrical       

a****tar
 [?]
Sign in to view client's details.
| a****tar
|    Canada
Fixed Price: $1,000 - $5,000   |  Posted: 6h, 45m ago  |  Ends: 14d, 17h  |   1 Proposal
We require a senior electrical engineer to reformat a circuit board for a new enclosure. Some features of the hardware are to be upgraded.
Category: Electrical       

a****tar
 [?]
Sign in to view client's details.
| a****tar
|    Canada
Hourly Rate: $10 - $15 / hr   |  Duration: 1-2 weeks  |  Posted: 7h, 5m ago  |  Ends: 14d, 16h  |   2 Proposals
We would like to redesign the 3d printer board we are currently using in order to customize it to our needs. We need a quick turnaround, and would prefer designs in KiCAD.
Category: Electrical       

b****abs
 [?]
Sign in to view client's details.
| b****abs
|    United States
Fixed Price: Less than $500   |  Posted: 8h, 13m ago  |  Ends: 14d, 15h  |   1 Proposal
Hello, I would like to hire someone to take a drawn schematic of a tube amp MC-100B and create a project file in Multi-Sim or similar program. The amp is fairly simple and the schematic is attached. The objective is to improve the linearity of this amplifier. There are two output transformers and 1 power transformer 8-10 caps and a few resistors and a choke on B+ rail. Looking forward to meeting someone who is skilled with tube amp simulation. I have another project like this for a smaller 4watt 832a tube amp that is available also. Please see the schematic link here:   [obscured]  /forums/attachment.php?attachmentid=100659 Thank you.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

d****oom
 [?]
Sign in to view client's details.
| d****oom
|    Canada
Hourly Rate: $10 - $25 / hr   |  Duration: 1-3 months  |  Posted: 9h, 41m ago  |  Ends: 14d, 14h  |   4 Proposals
I am looking for an embedded/firmware engineer to help me develop this product:   [obscured]  /projects/920064946/oscilloscope-watch The candidate must have a strong knowledge of the Atmel XMEGA AVR microcontroller, and develop on Atmel Studio using C. This is a battery powered device so the current consumption must be minimal, this is a critical requirement. The candidate must be able to produce efficient code and be familiar with techniques to get low power consumption. The candidate must have the following equipment: 1) A multimeter capable of reading current in the micro amp range. 2) A PDI debugger for the XMEGA microcontroller The sections of the firmware that need work are: 1) All functions related to the "Digital Watch" part: Time, Stopwatch. Calendar, Alarms, To Do lists... 2) Create at least 3 different faces: Digital, Analog, and an "Oscilloscope Face" 3) Diagnostics functions Optional items: 4) Games 5) Creating a more friendly bootloader...
Category: Other - Engineering &...       

g****ani
 [?]
Sign in to view client's details.
| g****ani
|    United States
Hourly Rate: Not Sure   |  Duration: 3-4 weeks  |  Posted: 9h, 59m ago  |  Ends: 6d, 14h  |   21 Proposals
We need a drafting professional to work for us on an ongoing basis. Using CAD, this person will create a bill of materials and drawings for each new order. We get 10-20 new orders a day. This will work well if you are in the Dallas/Ft. Worth area. Please write so I can explain more. <b>Approximate start date of the project after selecting a bid</b> Immediate (within 1-2 days)
Category: CAD       
Skills: 3D Modeling, AutoCAD, CAD/AutoCAD       

a****ech
 [?]
Sign in to view client's details.
| a****ech
|    United States
Hourly Rate: $10 - $25 / hr   |  Duration: 3-4 weeks  |  Posted: 10h, 9m ago  |  Ends: 6d, 13h  |   12 Proposals
I need an enclosure for a digital watch:   [obscured]  /projects/920064946/oscilloscope-watch The original prototype was done in Solidworks, but this design is to be considered only as a reference, this design has many flaws and intended only to be 3D printed:   [obscured]  /thing:181812 The new design will be done from scratch, the design will be produced for injection molding. The design does not need to look exactly the same as the prototype. The new design will need to use standard 22mm straps. The design will consist of many parts: - Top and Bottom, these are the main parts. - Display cover (glass crystal or other hard material to protect the display) - Button covers (3 different pieces) - Slide switch covers (2 identical pieces) - Light diffuser (similar to a light pipe) - Rubber covers, for the USB port and possibly the for the input connectors. I will provide you with a 3D model of the PCB assembly, as well as a mechanical sample, and a sample of the...
Category: Product Design       

g****ani
 [?]
Sign in to view client's details.
| g****ani
|    United States
Fixed Price: Less than $500   |  Posted: 11h, 14m ago  |  Ends: 14d, 12h  |   2 Proposals
  [obscured]  /design/1521/11 has a tutorial named "Standalone (Bare-Metal) USB Device Tutorial". Translate this project from ISE to Vivado. Familiarity with zynq preferred, this project has potential to grow as it will later be expanded upon. For this project just the conversion. Keywords: FPGA Verilog Zynq Vivado ISE Xilinx (and maybe embedded linux) For debug etc this project runs on Zedboard, please advise if you have zedboard or equivalent. Otherwise we may need to schedule for screen sharing.
Category: Electrical       

S****314
 [?]
Sign in to view client's details.
| S****314
|    United States
Fixed Price: Not Sure   |  Posted: 12h, 0m ago  |  Ends: 14d, 11h  |   11 Proposals
I am looking for an engineer or technical designer to finalize a product design to be moved to production. This product is a 2 part design consisting of dispensing machine and a product that will go inside the machine. Please note that this job is for a technical designer for a finalized print and CAD file to be sent for actual production not just for a concept artist.
Category: CAD       

J****ows
 [?]
Sign in to view client's details.
| J****ows
|    United States
Fixed Price: Not Sure   |  Posted: 12h, 45m ago  |  Ends: 14d, 11h  |   3 Proposals
A home care ear wax removal product that provides a user to both self-examine their ears for ear wax by use of the products patented self-exam otoscope features while they remove the ear wax with designed specula tips that effectively remove the ear wax from the ears. (The Cad work would include the otoscope, the modified specula tip designs, and a specula tip cleaning brush)
Category: CAD       
Skills: 3D Design       

W****ag1
 [?]
Sign in to view client's details.
| W****ag1
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 13h, 12m ago  |  Ends: 14d, 10h  |   21 Proposals
We are putting some plans together for a house in a Australia. We are looking for a Architect or draftsman who can lay the ideas we've had into a CAD system then help refine.
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

p****lis
 [?]
Sign in to view client's details.
| p****lis
|    Australia
Fixed Price: Less than $500   |  Posted: 13h, 18m ago  |  Ends: 14d, 10h  |   0 Proposals
I have a fire restoration job that I would like to have an experienced Xactimate estimator generate for me.
Category: Architecture       

c****rja
 [?]
Sign in to view client's details.
| c****rja
|    United States
Fixed Price: Less than $500   |  Posted: 13h, 24m ago  |  Ends: 14d, 10h  |   1 Proposal
PCB design t be matched to DCU114-B1 and containing communication ships for CAN, GPS and Zigbee radio's.
Category: Electrical       

P****Val
 [?]
Sign in to view client's details.
| P****Val
|    United States
Fixed Price: Less than $500   |  Posted: 14h, 36m ago  |  Ends: 14d, 9h  |   1 Proposal
******PLEASE APPLY FOR THIS POSITION ONLY IF YOU ARE CAPABLE******* 1.Candidates will go through stages of exams and online skype interviews. We are a training company of Catia, composite design and mechanical engineering/automotive design for people/ students who are new to the automotive design industry. We are currently looking for someone to be on a temporary international contract 2-3 months contract who will be teaching (intensive training) 5/6 days a week 8 hours a day a student to become fully trained to become a experienced automotive designer. We prefer if it is a composite design/automotive design company,experienced individuals are also considered. Our students are willing to travel to India/Pakistan/China and Europe.( Other countries can also be considered). Please send your CV explaining why we should choose you. Wages to be discussed.
Category: Product Design       

A****tek
 [?]
Sign in to view client's details.
| A****tek
|    United Kingdom
Fixed Price: $250 - $2,000   |  Posted: 17h, 56m ago  |  Ends: 14d, 6h  |   3 Proposals
Civil engineering is a professional engineering discipline that deals with the design, construction, and maintenance of the physical and naturally built environment, including works like roads, bridges, canals, dams, and buildings.
Category: Civil & Structural       
Skills: Architecture, AutoCAD, Civil Engineering       

a****tas
 [?]
Sign in to view client's details.
| a****tas
|    United Kingdom
Fixed Price: $50 or less   |  Posted: 18h, 25m ago  |  Ends: 14d, 5h  |   2 Proposals
This job is for someone who can write 2000 words on analysing a specific glider model which has been already designed on solidworks, where you are able to provide analysis, research, comparison with another similar glider model, calulcations and any other suggestions or ideas you may want to add to it. Graphs, pictures, detailed description, processes involved etc will be helpful. If any further questions, please ask!!
Category: CAD       
Skills: 3D Modeling, ANSYS, AutoCAD, SolidWorks, aircraft       

a****ter
 [?]
Sign in to view client's details.
| a****ter
|    United Kingdom
Hourly Rate: Less than $10 / hr   |  Duration: Not Sure  |  Posted: 19h, 5m ago  |  Ends: 14d, 4h  |   34 Proposals
Im looking for an individual who can create updated DWG files and PDFs for security systems that we design, supply & install Some work may only be 10 minutes some maybe 3 hours. The amount of work will vary dependent on my clients needs. I would need a quick turn around once I e mailed the changes or drawings required I would hand mark a PDF file showing the changes for the DWG file to be updated with a PDF file sent with the DWG file I need a reliable person who I can contact via mail. I am based in the UK, our normal working hours are Mon - Fri 08;00 - 17;30, however, some work will need to be returned over night for the next day Thank you
Category: CAD       
Skills: AutoCAD       

p****123
 [?]
Sign in to view client's details.
| p****123
|    United Kingdom
Fixed Price: Less than $500   |  Posted: 19h, 21m ago  |  Ends: 14d, 4h  |   13 Proposals
we have a resort with 220 apartments spread over 9 blocks arranged as a digital '8'. All apartments are nearly identical, 12mx4m 1bed. We are looking to add around 200 apartment, without going high and only using space available in the bigger side, maybe by removing one or both pools. I have included existing drawings. happy to award project to more than one elancer. This is for an initial concept to test the elancer. This is a resort for mature adults so we need to keep good access. By taking the pools on one side, maybe we can have a narrow pond to run along side blocks 3, 4,5.
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

s****001
 [?]
Sign in to view client's details.
| s****001
|    Spain
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job