Save this Search
     
Sort by:
  • Posted Date
Payment Verified
Fixed Price: Not Sure   |  Posted: Sep 01, 2015  |  Ends: 12d, 21h  |   14 Proposals
Background: We are currently using the nrf51822 as a proximity tag that triggers when the beacon (client) is within a specified distance from the host (transceiver). Scope of Work: Develop firmware to do trigger proximity alarms: 1. In a specified distance from the host transceiver 2. In a specified location from the host transceiver (e.g. front, left, right or back)
Category: Electrical       

c****gjt
 [?]
Sign in to view client's details.
| c****gjt
|    United States
Fixed Price: Not Sure   |  Posted: Sep 01, 2015  |  Ends: 12d, 21h  |   8 Proposals
I am the Contractor on a 3,000sf Single Family Home. I am looking for someone to put together material list for building materials listed below: Framing interior - lumber (metal studs) etc Drywall & finishing - drywall, green board, cement board, corner bead, tape etc Baseboards (lf) Exterior Compound for Stucco etc Fascia board Of coarse I need it asap. Thank you Thelma Petas
Category: Other - Engineering &...       

a****535
 [?]
Sign in to view client's details.
| a****535
|    United States
Fixed Price: Not Sure   |  Posted: Sep 01, 2015  |  Ends: 27d, 19h  |   4 Proposals
I need a device created that will do the following things: - will be mounted inside of a metal box (like container) - will need to be able to read tags that are stuck on metal - reading range +-2,5m - special tags will be programmed so the device will react differently based on what tag has been read - the tags should be as cheap as possible - EUROPEAN Frequency ranges only The deliverables should be: - the device itself in working order Further details will be discussed later
Category: Product Design       

a****ldi
 [?]
Sign in to view client's details.
| a****ldi
|    Belgium
Fixed Price: Not Sure   |  Posted: Sep 01, 2015  |  Ends: 12d, 18h  |   3 Proposals
We the leading distributor of scrap book paper, but recently we have found out the people have started scanning our designs sheets and selling it at lower cost. I need someone to help me to find or make any innovative approach with which we can prevent this problem. may be the sheets become black when some one tries to scan it i dont know just a thought.
Category: Chemical Engineering       
Skills: Chemical Engineering       

y****924
 [?]
Sign in to view client's details.
| y****924
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Sep 01, 2015  |  Ends: 12d, 18h  |   15 Proposals
Hi there, I currently have a swimwear line and am in the process of creating a new sportswear line. I currently have my swimwear made in the USA for quality control reasons and fast turn around time however would like to develop my sportswear overseas and potentially move my swimwear line as well. I am looking for someone who has connections/ experience with dealing with manufacturers overseas, who could potentially manage my quality control with them moving forward, who is trusting, and has knowledge with shipping/duty/ taxes as well (so receiving the product runs smoothly). Thank you! Lisa
Category: Contract Manufacturing       
Skills: Manufacturing Design       

l****dia
 [?]
Sign in to view client's details.
| l****dia
|    Canada
Fixed Price: Less than $500   |  Posted: Sep 01, 2015  |  Ends: 12d, 17h  |   42 Proposals
Hi, I'm in need of someone to create 2D illustrations. I'll need (8) floor plan illustrations and (2) site plan illustrations. I can provide PDF and AutoCAD files from the architect, and even some of the visual elements/textures to be used (e.g. trees, bushes, grass, etc). I've included examples of the preferred style, which were created in photoshop. It's important that the illustrations match this style. If this is a project you can complete please let me know how much you'd charge for all 10 illustrations, and how it will take you. I look forward to hearing from you. Thanks
Category: Architecture       

D****s_D
 [?]
Sign in to view client's details.
| D****s_D
|    United States
Fixed Price: Less than $500   |  Posted: Sep 01, 2015  |  Ends: 12d, 16h  |   2 Proposals
I need someone who can teach me how to design a shallow foundation 25 feet above ground high foundation. You need to be verse in the use of Staad pro, And Auto pipe.
Category: Civil & Structural       
Skills: STAAD, auto pipe       

u****ngs
 [?]
Sign in to view client's details.
| u****ngs
|    United States
Fixed Price: Less than $500   |  Posted: Sep 01, 2015  |  Ends: 12d, 15h  |   9 Proposals
need a Mechanical Engineer writer to help me on my work this is a title Towards a 'smart ship' ? the potential of renewable energy technologies for reducing fuel consumption on board large ships we need to complete this work and make some analysis to interviews
Category: Mechanical       

m****lab
 [?]
Sign in to view client's details.
| m****lab
|    Jordan
Fixed Price: Less than $500   |  Posted: Sep 01, 2015  |  Ends: 12d, 7h  |   22 Proposals
*PRIVATE JOB* Invite only Hi, Im looking to get a mold injection piece built, but i need a model and measurements to send over to the mold company. So I'm looking for someone to help me design the piece and provide the drawings that they will need to build the parts. The piece will be roughly the size of the radius of a shoe and has a lot of similar characteristics to the projects that you have in your portfolio. Let me know if you are interested and ill provide more information to get a quote. Thanks,
Category: 3D Modelling       
Skills: 3D       

k****art
 [?]
Sign in to view client's details.
| k****art
|    United States
Fixed Price: Less than $500   |  Posted: Sep 01, 2015  |  Ends: 12d, 7h  |   35 Proposals
Need to measure a portion of a commercial floor plan based on BOMA standard. Space is approximately 15-16K SF. Need a plan showing both usable and rentable square footage. Floor plan available in CAD, but if you are able to measure floor plans from PDF files, please indicate as we may have additional work which occasionally needs to be done.
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

c****yco
 [?]
Sign in to view client's details.
| c****yco
|    United States
Fixed Price: $500 - $1,000   |  Posted: Sep 01, 2015  |  Ends: 12d, 7h  |   9 Proposals
Hi I need someone who is in the area of XFEM, I need some work to be done. if anyone interested i will give more details. Thanks
Category: Other - Engineering &...       

A****ker
 [?]
Sign in to view client's details.
| A****ker
|    Australia
Fixed Price: $500 - $1,000   |  Posted: Sep 01, 2015  |  Ends: 12d, 7h  |   6 Proposals
hi I need a phd researcher or postdoc who can help me for long term in my research. Please be professional and provide high quality work. please do not bid if you are not researcher or postdoc. Thanks
Category: Mechanical       

A****ker
 [?]
Sign in to view client's details.
| A****ker
|    Australia
Fixed Price: Not Sure   |  Posted: Sep 01, 2015  |  Ends: 12d, 6h  |   9 Proposals
I have a prototype (see attached photos) of a 0.40 mm thick spout and media for a disposable shaker cup concept. Here is also a video demo:   [obscured]  /s/jed027wbz7gpfvo/shaker%20cup%20lid%20prototype%20demo.mov?dl=0 I need this manufactured in a biodegradable plastic at a cost around 10 cents per spout and media set. The ideal type of manufacturing process for this would be vacuum forming or inline forming. I already have the CAD files for this prototype, I just need someone who can manufacture this.
Category: Contract Manufacturing       

k****di1
 [?]
Sign in to view client's details.
| k****di1
|    United States
Fixed Price: Not Sure   |  Posted: Sep 01, 2015  |  Ends: 12d, 5h  |   21 Proposals
Hey Everyone, We are opening a new Juice and Smoothie Bar in Arlington Texas and are in need of some design consulting. The space is approx. 1050 sq. feet and located in a Shopping Mall. This project started out as something simple and we have evolved it into something much more involved and intricate. We have already submitted plans to the city for the design, but would love help with table/counter placements, cooler placements for grab and go juices, color schemes, displays, shelving etc. The ideal candidate has some experience with restaurants and/or the hospitality industry. We would also prefer to work with an architect/designer but are open to all applicants. Thanks for looking!
Category: Interior Design       

d****486
 [?]
Sign in to view client's details.
| d****486
|    United States
Fixed Price: Less than $500   |  Posted: Aug 31, 2015  |  Ends: 12d, 3h  |   5 Proposals
hi i need someone to do a simulation using ABAQUS of a composite laminate of 150mm X 100mm consist of 16 plies with these configuration ( 45 0 -45 90, 45 0 -45 90, 90 -45 0 45, 90 0 -45 45 ). the aim is to get this panel impacted by an indentor with diameter of 25 mm. if someone interested then please contact me and i will give you more details. Thanks
Category: 3D Modelling       

A****ker
 [?]
Sign in to view client's details.
| A****ker
|    Australia
Hourly Rate: Not Sure   |  Duration: 7-9 months  |  Posted: Aug 31, 2015  |  Ends: 12d, 2h  |   12 Proposals
We're a small production home builder in Oklahoma looking for someone to do pretty comprehensive take-offs for us. We'd prefer they use planswift so we can integrate it to our PO software. We have in-house architecture that uses Revit for design. This is a partial list of what we need estimated: Framing and cornice package, windows, exterior doors, roofing, sheetrock, brick, doors and trim, hardware, flooring, counter-tops. Thanks, Lance
Category: Other - Engineering &...       

l****del
 [?]
Sign in to view client's details.
| l****del
|    United States
Fixed Price: Less than $500   |  Posted: Aug 31, 2015  |  Ends: 4d, 1h  |   2 Proposals
We need a civil structural PE stamp on washington DC drawings. Drawings are already designed. We just need review and PE seal
Category: Civil & Structural       

a****els
 [?]
Sign in to view client's details.
| a****els
|    United States
Fixed Price: Not Sure   |  Posted: Aug 31, 2015  |  Ends: 12d, 0h  |   13 Proposals
Need an EE to review circuit diagram and assist in identifying/specifying referenced missing components and any others that may not be referenced in order to complete/enhance prototype design. Project involves small brushless electric motors used in the hobby industry for radio controlled helicopters, drones, planes, cars, etc. Please inquire directly and I'll share diagram after an NDA is executed.
Category: Electrical       
Skills: Electrical Engineering, Electronics       

c****ko1
 [?]
Sign in to view client's details.
| c****ko1
|    United States
Fixed Price: More than $10,000   |  Posted: Aug 31, 2015  |  Ends: 11d, 22h  |   12 Proposals
We are looking for a talented group or company to partner with in creating this ATM machine. Top level have to features: 1) It needs to provide all the standard functionality of a normal ATM 2) Gaming feature will be focused around casino games 3) Win points to access your money at no fee For the hardware we are looking for the CD and DD design work and documents. All software development necessary for the machine and features. We are in the early stage of features and are looking for an experienced people to partner with an finish putting it all together. We understand that your bids are not final. So take the features above and give us some high end bids that can accommodate them. We need to see rough pricing and time estimates to gage which companies have experience so please be thorough.
Category: Product Design       

a****pps
 [?]
Sign in to view client's details.
| a****pps
|    United States
Fixed Price: Less than $500   |  Posted: Aug 31, 2015  |  Ends: 26d, 20h  |   9 Proposals
We have small paper tubes 6mm id 7mm od - 50 mm length. we need to assemble the tubes in plastic cartridges as shown in the attached picture. The cartridge has two parts and when tubes are inserted in the one part and the other part of the cartridge is inserted, it looks like a strip as shown in the picture. There are 27 pins in the cartridge. 5 pins are little lengthier to ensure tight holding of the tubes. Design an automatic machine to fill automatically the plastic cartridges with tubes.About 10,000 strips are to be filled in a day. You have to ensure that damaged tubes are eliminated and all the pins are filled before next cartridge is passed on.
Category: Mechanical       

f****san
 [?]
Sign in to view client's details.
| f****san
|    India
Fixed Price: Not Sure   |  Posted: Aug 31, 2015  |  Ends: 3d, 19h  |   3 Proposals
Arkansas Architect needed for preparing plans for building permits to rehab an apartment complex in Arkansas. We will provide survey plans, and we are not planning any major changes just rehab and updating. You ned to talk to building code to find out what is needed to bring the building up to code. Building was built in 1978. Only Architects licensed in Arkansas will be considered.
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       
Preferred Location: United States

p****ncc
 [?]
Sign in to view client's details.
| p****ncc
|    United States
Hourly Rate: Not Sure   |  Duration: 1-3 months  |  Posted: Aug 31, 2015  |  Ends: 11d, 19h  |   10 Proposals
Hi there, Our client is a manufacturer of kitchenware, and we are looking for a industry designer specialize in non-stick pan designing, we will be consulting for some advises towards non-stick pan design. It will be ideal if you are based in Canada or North America. It'd be better if you are experienced or we also can get some fresh idea from you. Feel free to summit your proposal. This project will lead to a long term corporation if satisfied. (We may ask for your LinkedIn pages to know more about you.)
Category: Product Design       
Preferred Location: North America

r****yxu
 [?]
Sign in to view client's details.
| r****yxu
|    Canada
Fixed Price: Less than $500   |  Posted: Aug 31, 2015  |  Ends: 11d, 17h  |   25 Proposals
Looking for someone to create a negative mold for an STL file I have. The assembly is fairly basic, but feedback on alterations to the assembly is required. Final delivery will need a high resolution STL file with the accompanying original editable file. Prior experience a must!!
Category: CAD       
Skills: 3D Modeling, AutoCAD, CAD/AutoCAD       

r****sam
 [?]
Sign in to view client's details.
| r****sam
|    United States
Fixed Price: $500 - $1,000   |  Posted: Aug 31, 2015  |  Ends: 11d, 14h  |   18 Proposals
Our firm has recently acquired a 3,000 hectare land in Sub-Saharan Africa. We would require an electrical engineer (or equivalent) to provide us with a 5 page presentation which includes the following details: 1. The radiation levels on the land (we have the coordinates) 2. Distance from the grid; possible solutions to infrastructure issues that may arise 3. Expected number of panels required to get the highest returns 4. Expected costs (approximate) 5. Expected level of investment required.
Category: Electrical       

o****dba
 [?]
Sign in to view client's details.
| o****dba
|    United Kingdom
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job