Save this Search
     
Sort by:
  • Posted Date
Payment Verified
Fixed Price: Less than $500   |  Posted: Apr 15, 2015  |  Ends: 11d, 2h  |   13 Proposals
This product is a protein shaker designed to simplify the mixing of both ingredients. The product will have four parts; the lid, the protein container, the bottle, and most importantly a lever. We need to prove the concept that we can make a lever that drops the protein directly into the bottle without taking any of the components apart. The dimensions will be 11.0 x 3.5 x 10.0. The design will be up to you, and we will make adjustments as we move forward with the project.
Category: 3D Modelling       
Skills: 3D, 3D Modeling       

f****haz
 [?]
Sign in to view client's details.
| f****haz
|    United States
Hourly Rate: $20 - $30 / hr   |  Duration: 1-3 months  |  Posted: Apr 15, 2015  |  Ends: 25d, 23h  |   20 Proposals
Dominique Manor, is a lavish 84-room boutique Hotel/Spa, that will be located less than 1 mile from picturesque Kohler, Wisconsin and is in close proximity to many well-known golf courses such as Blackwolf Run, The Bull, and Whistling Straits. Its operation brings together an innovative Private Membership model for corporate participants and individuals. Moreover, the facility will offer the extensive amenities of other Luxury Destination Clubs, at a fraction of the cost.
Category: Architecture       

p****nce
 [?]
Sign in to view client's details.
| p****nce
|    United States
Fixed Price: Less than $500   |  Posted: Apr 15, 2015  |  Ends: 10d, 22h  |   8 Proposals
I have modeled a ring in matrix/rhino that has 6 LED light chips inside of it behind gems and behind a transparent crystal with engraving on it. I need 4 renders and with the top open and closed and with the internal lights on in dim environmental lighting and off in normal environmental lighting.
Category: 3D Modelling       

j****ith
 [?]
Sign in to view client's details.
| j****ith
|    United States
Fixed Price: $20 - $1,000   |  Posted: Apr 15, 2015  |  Ends: 10d, 22h  |   12 Proposals
Our company is seeking a freelancer to design and build a data logging board that will be used in an exposed outdoor environment. The device should be housed in a weather tight enclosure. The enclosure will need to have a bulkhead connection in order to allow a water hose to be connected for pressure sensor readings. The device should also be capable of storing readings from a pressure sensor which detects water pressure. The readings would ideally be stored onto an SD memory card for later retrieval. The device should have an external ON / OFF switch. The device can be made using an off-the-shelf device such as an arduino if the cost is less than designing a custom printed circuit board. In summary, the device should have the following operating characteristics: -- Weather tight enclosure suitable for use in an outdoor environment -- Bulkhead connection for water pressure connection -- External ON / OFF switch -- Pressure Sensor capable of being in continuous contact with ordin...
Category: Electrical       
Skills: Electrical Engineering, Electronics       

H****rks
 [?]
Sign in to view client's details.
| H****rks
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 15, 2015  |  Ends: 10d, 21h  |   3 Proposals
Create initial system layout drawing based on SOSD0 31620055 as posted in Drop Box in accordance with established drawing procedures
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

t****nex
 [?]
Sign in to view client's details.
| t****nex
|    United States
Hourly Rate: Not Sure   |  Duration: 1-2 weeks  |  Posted: Apr 15, 2015  |  Ends: 10d, 21h  |   14 Proposals
This project is for a mechanical engineer and involves designing a mechanical structure with rolling wheels to be incorporated into luggage in a closed configuration. In its opened position, the structure will improve the method by which a traveler can walk with his/her luggage in tow. The freelancer will be required to sign a simple non-disclosure agreement and agreement that the work being done is a work-for-hire under U.S. intellectual property law.
Category: Mechanical       

e****hor
 [?]
Sign in to view client's details.
| e****hor
|    United States
Fixed Price: Less than $500   |  Posted: Apr 15, 2015  |  Ends: 10d, 20h  |   6 Proposals
Need a set of prints drafted for certification approval of attached park model with porch/roof style as shown in picture.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

l****sue
 [?]
Sign in to view client's details.
| l****sue
|    United States
Fixed Price: Less than $500   |  Posted: Apr 15, 2015  |  Ends: 10d, 20h  |   4 Proposals
We are looking for a person with a high level of knowledge and relevant practical experience to create 50 questions for Carpentry The test must contain 3 types of questions (simple choice, multiple choices, true/false) allocated among 4 skill levels (beginner, intermediate, advanced, expert) and organized among several task-based subtopics. Thank you for your interest!
Category: Other - Engineering &...       
Skills: Carpentry       

o****bal
 [?]
Sign in to view client's details.
| o****bal
|    Canada
Fixed Price: Less than $500   |  Posted: Apr 15, 2015  |  Ends: 2d, 20h  |   0 Proposals
I need to learn how to create componentes in Zuken E3. For that I am asking for someone to instruct me using a terminal block as example. Details for the job can be found in the attached file.
Category: Electrical       
Skills: Electrical Engineering, Electronics       

c****oro
 [?]
Sign in to view client's details.
| c****oro
|    Brazil
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 15, 2015  |  Ends: 10d, 19h  |   15 Proposals
I am approaching the testing phase of a product and have done some basic designs in Autodesk Fusion. I would like someone to create a few concepts based on my designs and subsequently create high quality render images from the top 3 or so designs that I choose. This is a job for the artistic and creative. I am attaching three images. 'Stynd_Basic', is my own basic render of the prototype. (It is part of an iPad stand). The other two pictures are for inspiration. This is the style and feel of the stand that I would like you to pursue. If you are interested, let me know, and I will give you more details. If your ideas suite my interests, I will pursue further jobs with you to make this product manufacturable.
Category: Product Design       

a****rgo
 [?]
Sign in to view client's details.
| a****rgo
|    Canada
Fixed Price: Less than $500   |  Posted: Apr 15, 2015  |  Ends: 10d, 19h  |   2 Proposals
Looking for an architect to visit Hampshire Illinois (50 miles Chicago) to report on zoning, building permits, agreements with city. We have land in Hampshire IL, divided into about 40 lots. 3 houses were built by the developer before the land got foreclosed by the bank and we got it of the bank We need the architect to ideally visit the village of Hampshire Il, get us copies of all plans etc and report to us on the situation and what is needed to start building
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

p****ncc
 [?]
Sign in to view client's details.
| p****ncc
|    United States
Fixed Price: $500 - $1,000   |  Posted: Apr 15, 2015  |  Ends: 25d, 17h  |   5 Proposals
Hi all, I am having a project for the analog designers. I am having a continuous time current mode filter which is a 6th order bandpass done by cascading in the paper. For that design we have to apply multiple loop feedback design techniques to get the better sensitivity of the circuit. In brief this is the project that has to be done. Looking for positive reply's. If everything works better we have start immediately and complete it as soon as possible.. Thanks...
Category: Electrical       

r****adi
 [?]
Sign in to view client's details.
| r****adi
|    Canada
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 15, 2015  |  Ends: 2d, 15h  |   5 Proposals
I would like to design (and eventually create) a prototype for a weight which attaches to a cricket bat to help players build up shot strength. I imagine the weight will be a total of about 20 ounces, and made of either rubber, or metal encased in rubber. The weight will be attached to (velcro?) straps and would form a 'jacket' around the middle of the bat (see attached picture). The bat's natural taper, and the grip of the rubber would keep the weight in place. Please see this Pinterest board for some guidance:   [obscured]  /nemdab/bat-weight/
Category: Product Design       

H****usa
 [?]
Sign in to view client's details.
| H****usa
|    United Kingdom
Fixed Price: Not Sure   |  Posted: Apr 15, 2015  |  Ends: 1d, 14h  |   17 Proposals
This job is to detail the hot rolled steelwork as shown on the enclosed engineers drawings. It is a simple column and beam steel frame for the UK. Must be detailed in Tekla 18 or 19 Base plate and moment connection designs will be provided, however, all shear connections will be detailed by the draughtsperson as per the 'Green Book' The contract will be split into 3 stages: Stick Model and Prelim GA's (General Arrangement Drawings) Connecting the model Alterations and producing construction GA's Producing fabrication information, including editted fabrication drgs and marking plans etc The total program for this contract will be no more than 2 weeks. Payments will be split throughout the project and will be released within 48 hours of satisfactory completion each stage
Category: CAD       
Skills: Tekla Structures       

P****mes
 [?]
Sign in to view client's details.
| P****mes
|    United Kingdom
Fixed Price: $400 - $500   |  Posted: Apr 15, 2015  |  Ends: 85d, 14h  |   2 Proposals
I have 30 thobes I need sampled before I can start production on them. looking for someone who has experience in sample making.
Category: Product Design       
Skills: Manufacturing Design, SolidWorks       

S****i15
 [?]
Sign in to view client's details.
| S****i15
|    United States
Fixed Price: Not Sure   |  Posted: Apr 15, 2015  |  Ends: 10d, 14h  |   22 Proposals
Hello, I am needing a report created similar to the example attached, except instead of the front/top/side screenshot images, I would like there to be a single 3D model on each page that the user can spin with the mouse. I will provide the 3D models in DWG format. So they will have to be converted to 3D PDF and inserted into the report. There are approximately 20 models. Thank you, Lanny
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

s****nny
 [?]
Sign in to view client's details.
| s****nny
|    United States
Fixed Price: Not Sure   |  Posted: Apr 15, 2015  |  Ends: 10d, 9h  |   53 Proposals
Hello, we need help from an architect to visualize our next home. This is a mixed project with offices on the ground floor and upper levels for private spaces. We need someone who will be able to help us visualize some crucial parts of the project that need to be transformed : - 2 offices (see pictures 9350, 9351, 9353) - reception area (see PNI_9349) - meeting area (will be located in a small building on the back of the property, visible on PNI_9363) - kitchen (pictures 9383, 9390, 9391) - bathroom - living with fireplace (9361) - garden (which is basically on the roof of the small 62sqm building on the back of the property) We will provide pictures (and videos if you want) of the AS IS situation and a brief on what we want. We will also give access to our private pinterest walls where we've collected sources of inspiration. Please note that we need an architect, not someone who has only 3D rendering skills. We indeed need guidance into choosing the right colors, generatin...
Category: Architecture       
Preferred Location: North America, Western Europe, Eastern Europe

p****wab
 [?]
Sign in to view client's details.
| p****wab
|    Belgium
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 15, 2015  |  Ends: 2d, 8h  |   6 Proposals
We are making a shoe that has a unique sole. We will be embedding some sensitive components in the sole. Its up to you to make the 3d renderings using popular formats to send these to our prototyping shop so they can actually build the mold and use the materials of your recommendation. We are looking at someone that has engineering experience and has designed shoes before. Please send your resume, describe your formal education, include renderings and let us know if you have engineered shoes before.
Category: 3D Modelling       
Skills: 3D, 3D Modeling, shoe designing experience       

c****913
 [?]
Sign in to view client's details.
| c****913 *
|    United States
Fixed Price: $20 - $100   |  Posted: Apr 15, 2015  |  Ends: 10d, 7h  |   3 Proposals
We need a short program in C++ which will detect whether raw bytes are in Unicode or not. Input to the function will be Raw Bytes & Output will be a Boolean value TRUE for Unicode. Code must be able to handle NULL values or missing or extra bytes supplied to the function for Unicode test.
Category: Other - Engineering &...       
Skills: C++, Microsoft Foundation Classes (MFC)       

i****ork
 [?]
Sign in to view client's details.
| i****ork *
|    India
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 14, 2015  |  Ends: 10d, 4h  |   4 Proposals
GARMENT PATTERN MAKER NEEDED TO PROVIDE CAD PATTERNS, TECH PACK AND TECHNICAL DRAWING AVAILABLE-PATTERNS MUST MEET INDUSTRY STANDARD. CANDIDATE MUST HAVE A MINIMUM OF: 40 HOURS PATERN WORK 10 HOURS OF GRADING 6 HOURS OF DRAPING 3 HOURS OF TEXTILE SCIENCE 6 HOURS OF DESIGN DEVELOPMENT 6 HOURS OF PRODUCTION SEWING METHODS 3 HOURS OF PRODUCTION PLANNING AND SCHEDULING 3 HOURS OF ADVANCED MATHEMATICS FORMAL EDUCATION A PLUS BUT NOT DECIDING FACTOR- IF FORMAL EDUCATION ONLY WITH NO EXPERIENCE TRANSCRIPTS WILL BE REQUIRED.
Category: CAD       
Skills: 3D Modeling, AutoCAD, Industrial Design       
Preferred Location: North America

A****sst
 [?]
Sign in to view client's details.
| A****sst
|    United States
Fixed Price: $20 - $30   |  Posted: Apr 14, 2015  |  Ends: 10d, 3h  |   2 Proposals
I need a programming for this shaft made by gibbscam. We supply 3d format solidworks. Lathe We looking to hire for a long term
Category: Other - Engineering &...       

M****c78
 [?]
Sign in to view client's details.
| M****c78
|    Canada
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job