Save this Search
     
Sort by:
  • Posted Date
Fixed Price: $500 - $1,000   |  Posted: 1h, 6m ago  |  Ends: 14d, 22h  |   0 Proposals
Is there any northern blotting in the attached paper. How biotin used in northern blotting. I 'biotin use and northern blotting protocol'
Category: Chemical Engineering       

n****how
 [?]
Sign in to view client's details.
| n****how
|    Bangladesh
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 1h, 59m ago  |  Ends: 14d, 22h  |   0 Proposals
The job is for the product design of a pair of sports wrap around sunglasses which contain electronics at the corners before the leg hinges. A single lens design with the nose bridge completely separate from the frame is wanted. The two main electronics modules are approximately 12mm*12mm*3mm to be embedded at the corners of the frames and with 4 buttons also located at the corners. Wiring between the modules needs to run behind the top of the glasses lens. Below shows examples of the desired style:   [obscured]  /item/Men-s-Sunglasses-100-Top-Quanlity-Sports-Sunglasses-fashion-sunglasses-brand-sunglasses-Ride-Glasses-eyeglasses-sports/355777567.html   [obscured]  /oakley-wrap-around-sunglasses/p/itmdtz5s6qjkgxzw   [obscured]  /sports-wrap-around-sunglasses-d548-orange-uv400/
Category: Product Design       

b****eda
 [?]
Sign in to view client's details.
| b****eda
|    Ireland
Hourly Rate: $10 - $15 / hr   |  Duration: 1-2 weeks  |  Posted: 2h, 14m ago  |  Ends: 14d, 21h  |   2 Proposals
i have a set of drawings United States wood framing house. , i want to have it drawn in chief architect. the originally drawing is in CAD. after you finish send the original chief architect file back to me.
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

m****eve
 [?]
Sign in to view client's details.
| m****eve
|    United States
Fixed Price: $700 or more   |  Posted: 2h, 24m ago  |  Closed  |   3 Proposals
Rebuild two KiCAD PCBs in Altium. The files are available here:   [obscured]  /sh/uabtabd1aara1x8/AAB4m... Deliverables include: 1: Gerbers 2: PDF of every layer 3: 3D Renders 4: STEP file of final board 5: BOM (which we call an Master Component List) 6: Altium project files 7: Schematic in pdf form 8: assembly/fabrication drawing with dimensions 9: Pick n place text file.
Category: Electrical       

****
 [?]
Sign in to view client's details.
| Client
|    United States
Fixed Price: Less than $500   |  Posted: 2h, 35m ago  |  Ends: 14d, 21h  |   1 Proposal
need someone to draw a animated 3d telescoping assembly, must be able to do this job within 12 hours it is a relatively simple design
Category: 3D Modelling       
Skills: 3ds Max, 3D Modeling, 3d Animation, 3D Design       

J****NES
 [?]
Sign in to view client's details.
| J****NES
|    United States
Fixed Price: $20 - $30   |  Posted: 4h, 28m ago  |  Ends: 14d, 19h  |   3 Proposals
INTERIOR DESIGN AND RENDERINGS FOR AN IMPORTANT CLIENT IN USA AND CANADA. NOTES WILL BE SUPPLIED PRIVATELY PRESENTATION AND DESIGN MUST BE PERFECT
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

m****ano
 [?]
Sign in to view client's details.
| m****ano *
|    Canada
Fixed Price: Less than $500   |  Posted: 4h, 30m ago  |  Ends: 14d, 19h  |   4 Proposals
We are looking for someone to draw a residential room addition for our house. The document will have six plans: 1. Plot Pan 2. Floor Plan 3. Foundation Plan 4. Cross Section 5. Elevations 6. Framing Plan We have a file with the standards and it should be very simple to make the changes. We are looking to spend $100 in this project.
Category: Architecture       
Skills: Architecture       

l****gns
 [?]
Sign in to view client's details.
| l****gns
|    United States
Fixed Price: $20 - $30   |  Posted: 4h, 35m ago  |  Ends: 14d, 19h  |   0 Proposals
exterior rendering and 2 interior renderings for an important client. Notes will follow privately interior design and exterior rendering must look stunning
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

m****ano
 [?]
Sign in to view client's details.
| m****ano *
|    Canada
Fixed Price: Less than $500   |  Posted: 4h, 49m ago  |  Ends: 14d, 19h  |   14 Proposals
3d drawing needed of a small exit sign. Must be saved as .stl for 3d printing. Please see attachment for more details
Category: 3D Modelling       
Skills: 3D       

T****don
 [?]
Sign in to view client's details.
| T****don
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: 5h, 15m ago  |  Ends: 14d, 18h  |   9 Proposals
I need to take a SOLIDWORKS 2015 model (of 2-3 sub assemblies) and create shop/mfg drawings. -MUST HAVE SW 2015 -Good working knowledge of materials and manufacturing processes.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

S****TOK
 [?]
Sign in to view client's details.
| S****TOK
|    United States
Fixed Price: Not Sure   |  Posted: 8h, 0m ago  |  Ends: 14d, 15h  |   5 Proposals
I need to have a samples created based on a design that my team has developed. I will supply the technical documents (gerber, BOM and layout, etc.) for the product. These boards will be used of the development/testing and ultimate the baseline for the end product. The ESP8266EX is the WiFi SoC that is the foundation of the design.
Category: Mechanical       

i****er1
 [?]
Sign in to view client's details.
| i****er1
|    United States
Fixed Price: Not Sure   |  Posted: 8h, 19m ago  |  Ends: 14d, 15h  |   6 Proposals
I have a patent on an automotive product.I have run some tests and I need an engineer to convert my data from horsepower to gas mileage.
Category: Other - Engineering &...       
Preferred Location: United States

B****nal
 [?]
Sign in to view client's details.
| B****nal
|    United States
Fixed Price: Not Sure   |  Posted: 9h, 14m ago  |  Closed  |   2 Proposals
I need someone to make some changes to a car in catia v5 following some instructions (dimensions). The freelancer will have to provide me the result as a surface and solid. Moreover I want you to record the entire process and provide me the video. I need a quick turnaround.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks, catia v5       

****
 [?]
Sign in to view client's details.
| Client
|    United Kingdom
Fixed Price: $20 - $200   |  Posted: 9h, 18m ago  |  Ends: 14d, 14h  |   7 Proposals
I am looking to build a product made out of molded plastic. It will be fairly similar to the suncast serving cart Link to product can be found here:   [obscured]  /ip/19725646?wmlspartner=wlpa&adid=22222222227014894664&wl0=&wl1=g&wl2=t&wl3=40471114832&wl4=&wl5=pla&wl6=60820257686&veh=sem I just want to vary some features however. Whomever helps me design plans should know I will be taking these plans to a manufacturer so I will need you to understand what they are looking for.
Category: Product Design       

P****ate
 [?]
Sign in to view client's details.
| P****ate
|    United States
Fixed Price: Less than $500   |  Posted: 9h, 21m ago  |  Ends: 14d, 14h  |   6 Proposals
I require a structural engineer to design and calculate wind loadings of a solid screen surface which will be suspended on a frame which I have already purchased. I need a design & calculations to ensure it wont blow over.
Category: Civil & Structural       

b****810
 [?]
Sign in to view client's details.
| b****810
|    United Kingdom
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 9h, 26m ago  |  Ends: 2d, 14h  |   1 Proposal
Need Landscape Architecture drawings to meet City of Loveland Colorado Standards. The Plot of Land consists of 3/4 acre commercial development with a 4000 square foot building to be built on site. Need drawing for bushes, lawn, trees and other requirements for City Planning Department.
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       
Preferred Location: United States

t****rey
 [?]
Sign in to view client's details.
| t****rey
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 11h, 4m ago  |  Closed  |   5 Proposals
I have a simple product drawn up in Google Sketchup and I need it converted to Pro E. This will be used to send to the production facility for manufacturing.
Category: Product Design       
Skills: Manufacturing Design, Pro-E, SolidWorks       

s****rky
 [?]
Sign in to view client's details.
| s****rky
|    United States
Fixed Price: Less than $500   |  Posted: 11h, 11m ago  |  Ends: 14d, 12h  |   10 Proposals
I am assisting an inventor in need of a prototype. Essentially, the design includes modifications to a standard twist on 3-litre soda bottle cap. We intend to source the printing locally but require a .stl rendering.
Category: Product Design       
Skills: 3D Modeling, AutoCAD       

V****ill
 [?]
Sign in to view client's details.
| V****ill
|    United States
Fixed Price: Not Sure   |  Posted: 11h, 23m ago  |  Closed  |   16 Proposals
We are looking for someone to perform a paper to 3D CAD conversion. Would like both Solid Works and AutoCAD files. This needs to be to proper dimensions so that we can send the files to our prototype manufacturer.
Category: 3D Modelling       

J****les
 [?]
Sign in to view client's details.
| J****les
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 11h, 36m ago  |  Ends: 14d, 12h  |   24 Proposals
To whom it may concern: I am interested in hiring an individual capable of running solid works to help me create a manufacturable piece. I am using blow molding and extrusion manufacturing techniques. I have all the dimensions for the most part with a working prototype. Please send me requests for more information. Skippler
Category: 3D Modelling       
Skills: SolidWorks, Manufacturing       

T****ler
 [?]
Sign in to view client's details.
| T****ler
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: 12h, 8m ago  |  Ends: 14d, 11h  |   26 Proposals
We are looking for an architect to help us remodel the facade of an Outdoor Living/Patio store plus also help us with creative ideas for the indoor space. Total space is 8000 sq ft.
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

e****urn
 [?]
Sign in to view client's details.
| e****urn
|    United States
Fixed Price: Less than $500   |  Posted: 12h, 9m ago  |  Ends: 14d, 11h  |   5 Proposals
Hi guys, I wanna find someone who can write 3 articles for my new blog. Here are the titles below: 1. What is cnc machining 2. Precision Engineering 3. China Precision Machining Service If you can write good content about these subjects, feel free to contact me. And also, some tasks will be followed(script-writing-tasks). Pls write 'CNC' at the beginning of your proposal for I wanna drop those 'machining mails'. Thank you in advance.
Category: Mechanical       
Skills: Mechanical Engineering       

c****ech
 [?]
Sign in to view client's details.
| c****ech
|    China
Fixed Price: Less than $500   |  Posted: 12h, 13m ago  |  Ends: 14d, 11h  |   1 Proposal
1. I am looking for research that might find different effects that can be created on the skin that will assist the skin in having skincare penetrate it more effectively. An EXAMPLE is the bohr effect see   [obscured]  /sxpcEZ3djtg 2. What I like about the technology is that it has TWO distinct components the Sodium BioCarbonate Tablet..which is used to exfoliate the skin AND is also used to start the Borh effect which causes oxygen to be released from the skin helping the skincare penetrate...the second component is the water based skincare that reacts with the skin. I am looking to create either similar kind of reaction..maybe their are other effects that create oxygenation (OR something else) that allows better penetration of skincare products. So I guess if I had to restate the objective it would be 1. Research possible effects along with the Bohr effect that could help skincare penetrate more effectively (I am NOT looking for information only on the Boh effect Please, when y...
Category: Chemical Engineering       
Skills: Research, Chemical Engineering       

m****ley
 [?]
Sign in to view client's details.
| m****ley
|    United States
Fixed Price: Less than $500   |  Posted: 13h, 24m ago  |  Closed  |   3 Proposals
Title pretty much says it all. I will send you some info and describe our product, the use environment, and a few of the different parts. I need recommendations for the resins to use in 2-3 different injection molded parts and one extrusion. Would also be nice if you are knowledgeable in coatings, logos and color application to plastic parts, but not required. Further bonus points for info on metallization, but again, not required.
Category: Other - Engineering &...       

d****ius
 [?]
Sign in to view client's details.
| d****ius
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job