Save this Search
     
Sort by:
  • Posted Date
Hiring Open
Fixed Price: $30 - $50   |  Posted: 53 minutes ago  |  Ends: 14d, 23h  |   0 Proposals
I am looking for someone to add a very simple ADC function to my current working code. here is an idea on my current code i have a circuit that has an analog op amp circuit which is responsible of applying a ratio to an input signal via dividing resistors, and i have 16 pos rotary switch controlling 16 optocoupler to control which resistor is selected so the ratio can be different, now all what i need is some one that can add a working ADC so that it can control when the optocoupler is opened and when is closed based on the input voltage. i forget to mention that code i have is been made on CoIDE i need this adc code ready in 48 hours maximum. please Bid with a reasonable amount thanks
Category: Electrical       

h****omy
 [?]
Sign in to view client's details.
| h****omy
|    China
Fixed Price: Less than $500   |  Posted: 58 minutes ago  |  Ends: 6d, 23h  |   2 Proposals
I need someone to create a 3D rendering, floor plans and an elevation of the house plan I have in mind. The house is 2 story, 4 bedroom, 3.5 bathroom home. The house revolves around a large open area that includes the living room, kitchen and dining area all in a common space. The ceiling in the common area would be 25-30 ft high at the tallest point. I don't want any walls/change in ceiling height/etc... seperating those three areas. The main area should be either square or rectangular. The entrance to the house would be a grand stairway leading up to a wrap around porch and double front doors. As you enter the house you will be standing on a "landing" that runs across the front and the full length of both sides of the house (forming a U shape). As you stand just inside the front door you will looking down (bear in mind you just walked up an external staircase) into the Great room with large windows all along the back showing the back porch and pool area. The back wall may h...
Category: Architecture       

c****t01
 [?]
Sign in to view client's details.
| c****t01
|    United States
Fixed Price: Not Sure   |  Posted: 1h, 1m ago  |  Ends: 14d, 22h  |   1 Proposal
Hello Freelancer, FWS is looking for an engineer(s) to help research and compile data of raw materiel ferrous/nonferrous metals and plastics specifications and closest equivalents for the different societies from around the world. Data can be compiled from existing sources such as websites , text books or any other verifiable sources. Similar websites ;   [obscured]  /index.aspx ;   [obscured]  /demob_kov_chem.cfm. Final deliverable format TBD. Thanks
Category: Other - Engineering &...       

t****oll
 [?]
Sign in to view client's details.
| t****oll
|    United States
Fixed Price: Not Sure   |  Posted: 1h, 53m ago  |  Ends: 14d, 22h  |   14 Proposals
Hello, In search of cad designer to make modifications to existing file. Current file already has ideal thickness, height, and width implemented into design. The overall design is not complicated, but requires some changes in design due to preference. The design is cap and bottle Thanks
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

s****don
 [?]
Sign in to view client's details.
| s****don
|    United States
Fixed Price: $100 - $300   |  Posted: 2h, 24m ago  |  Ends: 2d, 21h  |   5 Proposals
I designed a simple chargeable lamp with MCU in Altium. The schematic as well as all components and footprints are already in Altium. I am looking for somebody who can do the routing for an initial proto PCB. - One side components - Double layer routing - 50mm x 50mm PCB - See the BOM file exported from Altium attached. The Altium files which already contain all dimensions and locations of the main components will be shared after a project has been granted.
Category: Electrical       

R****ark
 [?]
Sign in to view client's details.
| R****ark
|    India
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 2h, 49m ago  |  Ends: 14d, 21h  |   3 Proposals
Nx ,design , concentrating on drawing and drafting , 11/11/11/11/11/11/11/11/11/11/11/11/11/ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff f ff f
Category: Other - Engineering &...       

b****az3
 [?]
Sign in to view client's details.
| b****az3
|    United States
Hourly Rate: $30 - $40 / hr   |  Duration: 1-2 weeks  |  Posted: 2h, 59m ago  |  Ends: 14d, 21h  |   10 Proposals
1. Document alpha prototype; ~ 300 parts 2. Deliver full drawing package 3. Immediate need 4. On-site work in North West Suburb
Category: CAD       

j****651
 [?]
Sign in to view client's details.
| j****651
|    United States
Fixed Price: $50 - $100   |  Posted: 3h, 1m ago  |  Ends: 14d, 20h  |   8 Proposals
Attached is a word file and Solidworks files with specific instructions on modifying the attached solidworks assembly.
Category: CAD       
Skills: SolidWorks       

r****ing
 [?]
Sign in to view client's details.
| r****ing
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 3h, 14m ago  |  Ends: 29d, 20h  |   0 Proposals
Looking for a senior software engineer that have a robust understanding in face recognition and hand gesture recognition using openCV. The candidate should also have certain experience porting CV algorithms to an embedded linux platform Desired Skills & Experience ? MS or PhD in Computer Science or Electrical Engineering with a focus on Computer Vision ? Port code/CV algorithms to embedded linux ? Strong background in computer vision, image processing and computational photography ? Strong programming skills in C, C++, Perl, or Python ? Familiarity with GPU computing (CUDA, OpenCL, DirectCompute) ? Familiarity with computer vision APIs (OpenCV , OpenVX) ? High proficiency in C++ ? Fast prototyping skills, including comprehensive feature integration during all cycles of development ? Practical knowledge of machine learning, Bayesian filtering, information theory, and 3D geometry
Category: Other - Engineering &...       

p****uge
 [?]
Sign in to view client's details.
| p****uge
|    United States
Fixed Price: Less than $500   |  Posted: 5h, 32m ago  |  Ends: 14d, 18h  |   0 Proposals
I need someone with great design quality...who can create in a timely manner...and has the expertise in crafting these gloves...info will be sent to you if selected
Category: Product Design       

v****ons
 [?]
Sign in to view client's details.
| v****ons
|    United States
Fixed Price: $20 - $50   |  Posted: 6h, 37m ago  |  Ends: 14d, 17h  |   10 Proposals
Im looking for someone to design a car phone holder , ideally someone with engineering expertise , to ensure teh phone holder has a mechanism that move the phone holder
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

D****han
 [?]
Sign in to view client's details.
| D****han
|    United Kingdom
Fixed Price: Less than $500   |  Posted: 7h, 25m ago  |  Ends: 1d, 16h  |   22 Proposals
Hello Elance CAD professionals We have a quick one - we need a solid CAD (stl, iges most format are good) for prototype mold production made from 2 scans we currently have. It is a sole - we have one scan (STL) with the upper of the shoe without the sole - this will form the inside part of the sole mold. We then have the sole and the upper together (also STL) in one scan. We need help to combine these two to have a solid model for just the sole. This model will go directly to mold manufacturer for making a prototype mold. As I said a quick and easy job.
Category: CAD       
Skills: 3D Modeling       

m****ler
 [?]
Sign in to view client's details.
| m****ler
|    Sweden
Fixed Price: Not Sure   |  Posted: 7h, 28m ago  |  Ends: 14d, 16h  |   1 Proposal
Looking for a direct replacement to the "LENOVO ThinkVision LT1423p wireless touch monitor" you can also design one with NRE + unit cost. general requirements: ? Dimensions must be very similar (no more than 10mm difference in any dimension) ? 13.3'' wireless touch screen ? Full HD resolution ? 16:9 ration ? Touch technology compatible with+ gloves , projected capacitive ? Strong Wireless connection from ~5 meters ? Supports video streaming in no less than 450Mbps
Category: Other - Engineering &...       

y****3tn
 [?]
Sign in to view client's details.
| y****3tn
|    Israel
Fixed Price: $1,000 - $5,000   |  Posted: 7h, 48m ago  |  Ends: 14d, 16h  |   3 Proposals
I found most of K-band FMCW radar front-end modules are made with flat antenna. But I need it to be connected to WR-42 waveguide and I'm looking for a solution to fulfill my requirement. I'm looking for someone who can solve this issue.
Category: Electrical       

W****m88
 [?]
Sign in to view client's details.
| W****m88
|    Korea, Republic of
Fixed Price: Not Sure   |  Posted: 9h, 52m ago  |  Ends: 14d, 14h  |   8 Proposals
Looking for companies/individual who has keen interest or had good design experience for a handphone holder for motorcycle.
Category: Product Design       

b****yeo
 [?]
Sign in to view client's details.
| b****yeo
|    Singapore
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 9h, 58m ago  |  Ends: 59d, 14h  |   13 Proposals
Hi, I am seeking someone who has experience in electrical engineering. The work requirements will be sent. Thank you.
Category: Electrical       

d****zzt
 [?]
Sign in to view client's details.
| d****zzt
|    Israel
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 10h, 9m ago  |  Ends: 14d, 13h  |   3 Proposals
We are looking for software developers to take and design coding challenges in C/C++. If you know any of these languages you are perfect for the job. The job will be 8 hours per week. You will be required to login to our system and solve the coding challenges that are set for your user, You can manage your time and split your hours. If you score high on our challenges, we might offer you to be a challenge designer, which includes an increase in hourly rate and additional weekly hours. If you are interested, please apply on the attached link:   [obscured]  /forms/WJ2yBTPgZT If you will be selected you will be required to sign NDA before starting and will hire you on Elance . Please do not re apply if you have already applied to one of our positions/was hired.
Category: Other - Engineering &...       
Skills: C++       

M****uss
 [?]
Sign in to view client's details.
| M****uss
|    United States
Fixed Price: $30 or less   |  Posted: 13h, 50m ago  |  Ends: 14d, 10h  |   13 Proposals
I need a Solidworks file containing a 60 sided polyhedron composed of triangles. Attached is a photo. Each triangle is 3.1" X 3.1" X 3.1" If you can successfully create this, I will have much more work for you.
Category: CAD       
Skills: 3D Modeling, SolidWorks       

r****ing
 [?]
Sign in to view client's details.
| r****ing
|    United States
Hourly Rate: Less than $10 / hr   |  Duration: Not Sure  |  Posted: 13h, 51m ago  |  Ends: 14d, 10h  |   4 Proposals
identity solvents for botanical extracts based on your knowledge and current available data, further details in PM
Category: Other - Engineering &...       

A****JJH
 [?]
Sign in to view client's details.
| A****JJH
|    Taiwan
Fixed Price: Not Sure   |  Posted: 14h, 15m ago  |  Ends: 14d, 9h  |   7 Proposals
I am building a house, and need help with electrical service load analysis, electrical wire routing design / circuit design, and part list for job. I have some future items that will need dedicated ciruits for the future Future need dedicated circuit: Port a che ( Covered parking)- 4 lights over the garage -Future bathroom and game room possible central AC unit added to over garage I think a breaker panel in the garage and a panel in the bedroom 4 Closet Trying to get a parts list to figure the cost of material for the job as I have several electricians bidding the job, but some are bidding just labor and I am unable to compare apples to apples. Also I wasnt to make sure the electrician do the right service into the house.
Category: Electrical       

r****005
 [?]
Sign in to view client's details.
| r****005
|    United States
Fixed Price: Less than $500   |  Posted: 15h, 56m ago  |  Ends: 14d, 8h  |   13 Proposals
Very simple steel structure for which I have attached a hand sketch. -consider a roof snow load of 25 pound per square foot -roof dead load of 15 pounds per square foot -ultimate wind velocity 120 miles per hour I need the wind and and snow load for the structure using ASCE 7-10 Also check the capacity of the four columns and four beams if they are made from the following material:   [obscured]  /merchant.cfm?pid=18019&step=4&showunits=inches&id=1270&top_cat=0
Category: Civil & Structural       
Skills: Civil Engineering, Structural Analysis       

j****tay
 [?]
Sign in to view client's details.
| j****tay
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 16h, 45m ago  |  Ends: 14d, 7h  |   11 Proposals
Looking for some who have expertise in solving integer linear programming , I will provide all the informaton needed like data , desicion variables , equations to use and constrains..looking for a very very quick turn around
Category: Other - Engineering &...       

a****346
 [?]
Sign in to view client's details.
| a****346
|    United States
Fixed Price: Not Sure   |  Posted: 17h, 25m ago  |  Ends: 6d, 6h  |   4 Proposals
Hello! Thank you for considering this job. I am working with a friend to build a coffee stand (espresso stand) from the ground up. What I need is a few of ideas or schematics to work with for several different locations. Two of the locations require thin but long coffee stands. And one location has all the space you can imagine for a free standing espresso stand. I would imagine the stands being anywhere from 12 feet long to 6 feet wide, approximately. Preferably, I need someone who is familiar with doing this type of café/coffee stand design ? and who can help design the space for the stands which would include space for an espresso machine, grinders, storage, refrigerator double-sided windows, etc. I should be able to give the schematics to a contractor who would then be able to build the stand using what I gave them. The stand should be self-contained, plumbed (If water is available), and able to transport on a trailer. Im a total novice at this, so any other advice may ...
Category: Civil & Structural       

v****gns
 [?]
Sign in to view client's details.
| v****gns
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job