Save this Search
     
Sort by:
  • Posted Date
Hiring Open
Fixed Price: Not Sure   |  Posted: 1h, 9m ago  |  Ends: 14d, 22h  |   0 Proposals
I need a complete camera case design that meets standard carry-on requirements of all airlines. General specs for carry on are 22x14x9 inches and 15#. This bag needs to safely and securely house a dji phantom 3 (including controller, charger and 2 batteries), a canon rebel t3i with a 17-40 mm lens, an 8-15 mm lens, a gopro camera and some accessories such as cables, gorillapod, feiyu wearable gimbal and battery charger. Drones are usually housed in dense foam and camera gear is usually housed in padded compartments but I cannot find a design that will house both with required specs. Example of drone storage:   [obscured]  /HPRC-HPRC2700WPHA3FO-Custom-Phantom-Black/dp/B00ZL3F2UY/ref=sr_1_1?ie=UTF8&qid=1441242471&sr=8-1&keywords=phantom+3+foam&pebp=1441242470657&perid=1HW0BBTQNFNBSJFA2MNG Example of camera storage;   [obscured]  /products/shootout-backpack-le-small-black.aspx Prefer ability to switch out camera gear as necessary; so prefer hou...
Category: Product Design       

r****a15
 [?]
Sign in to view client's details.
| r****a15
|    United States
Fixed Price: Less than $500   |  Posted: 1h, 17m ago  |  Ends: 14d, 22h  |   0 Proposals
I am looking for a person to get me a few quotes on a custom made metal piece that I use in my manufacturing. The metal piece will need a quote that includes shipping to Kansas City
Category: Contract Manufacturing       

M****les
 [?]
Sign in to view client's details.
| M****les
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 1h, 48m ago  |  Ends: 14d, 22h  |   3 Proposals
Hello, I am looking to find an engineer who can create a box for me that has several features a.) A fixed cylinder like compartment that is apart of the inside of the box and sits on the right side wall. The Cylinder would be 2 inches wide and goes as deep as the box is (2 inches deep). b.) The box would have a floor that moves up and down. A screw at the bottom of the box will do this. This would mean that the box has two floors, the fixed floor and the floor on top that would raise the floor to the top of the box as you turn the screw. c.) The bottom fixed floor would have a 1-inch square indent in the center of the box that is where the head of the screw would be found. Box dimensions are 2 inches tall 8 inches long 5 inches wide I will provide a picture for assistance.
Category: 3D Modelling       

W****ots
 [?]
Sign in to view client's details.
| W****ots
|    United States
Fixed Price: $500 - $1,000   |  Posted: 3h, 39m ago  |  Ends: 14d, 20h  |   1 Proposal
A large scale CFD (Computational Fluid Dynamics) model is needed to set-up coupled multiphase modeling and 6DOF with dynamics moving meshing. Only expert (Ansys) applies for this. Thank you.
Category: 3D Modelling       

v****cfd
 [?]
Sign in to view client's details.
| v****cfd
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 5h, 52m ago  |  Ends: 14d, 18h  |   3 Proposals
HI, we need a licensed florida architect or engineer to draw a plan for a simple 24xx26x24 3 wall extension that ties into an existing house.
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       
Preferred Location: United States

D****ios
 [?]
Sign in to view client's details.
| D****ios
|    United States
Fixed Price: About $20   |  Posted: 5h, 56m ago  |  Ends: 14d, 18h  |   5 Proposals
I require someone with experience in converting images into a dxf file ready to laser cut. I will be using these on a bystronic laser. This will be a regular thing as im currently working on a few different projects & will require alot of images converting.. The images must be converted to a very high standard so that i can use the dxf file straight away without having to make adjustments to the file.
Category: CAD       

c****rds
 [?]
Sign in to view client's details.
| c****rds
|    United Kingdom
Fixed Price: Less than $500   |  Posted: 5h, 57m ago  |  Ends: 2d, 18h  |   7 Proposals
We have done the floor plans in autocad and now we need to do the interior architectural elevation drawings for each of the 3 floors. I have the Autocad file for you to referance. We need this project done professionally and quickly. please let me know if your interested in this project as we need to start asap.
Category: CAD       
Skills: Drafting       

M****oup
 [?]
Sign in to view client's details.
| M****oup
|    Canada
Fixed Price: $25 - $75   |  Posted: 6h, 31m ago  |  Ends: 14d, 17h  |   0 Proposals
i need shoe patent drawing for shoe i have 3ds max model and i can share the drawings must be consistent with the USPTO standard please share some sample of previous work
Category: CAD       

e****yed
 [?]
Sign in to view client's details.
| e****yed
|    Egypt
Fixed Price: Not Sure   |  Posted: 6h, 41m ago  |  Ends: 14d, 17h  |   4 Proposals
I'll need someone who create a piece of software for me (including GUI). It won't be very complicated, it will required: -reading some data from an excel file -doing some basic calculations with that data (converting some times from minutes to second, doing average, etc) -Once that is done you'll have to do a number of iterations applying some special features (coeficients in each iteration, "if", etc) My budget is very limited for this one, approx $100 With regards to the time frame, I'm not in a hurry, so...let's say 2 weeks ? (hope this help to reduce the price) I will provide more details upon request. Cheers
Category: Mechanical       

p****785
 [?]
Sign in to view client's details.
| p****785
|    United Kingdom
Fixed Price: Less than $500   |  Posted: 6h, 59m ago  |  Ends: 14d, 17h  |   12 Proposals
Hub less Bicycle concept drafted from my drawing to exact measurements, file must be fit to take to fabrication for a working model need finished in five days
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

K****ozi
 [?]
Sign in to view client's details.
| K****ozi
|    United States
Fixed Price: Not Sure   |  Posted: 7h, 57m ago  |  Ends: 14d, 16h  |   8 Proposals
I have an idea for a product, but can't seem to come up with the right design. I need the help of an expert to help complete the design. I will attach a list of what the product will have.
Category: Product Design       

t****093
 [?]
Sign in to view client's details.
| t****093 *
|    United States
Fixed Price: Not Sure   |  Posted: 8h, 22m ago  |  Ends: 14d, 15h  |   7 Proposals
Hello, I'm looking for mechanical engineering to join me on upcoming projects. Current project revolves around sheet metal housing. Only people with a strong portfolio will be considered. The ability to speak with me through SKYPE is a must. Thank you all for your time.
Category: Mechanical       
Preferred Location: North America

c****els
 [?]
Sign in to view client's details.
| c****els
|    United States
Fixed Price: Not Sure   |  Posted: 8h, 55m ago  |  Ends: 14d, 15h  |   5 Proposals
Run FEA on linkage castings as described by our engineer. Produce reports as requested by our engineer. Part files and description of FEA parameters will be provided. Please fill out and sign the attached nondisclosure agreement so that we can post the files and have you quote the job.
Category: Mechanical       
Skills: Finite Element Analysis       

r****may
 [?]
Sign in to view client's details.
| r****may
|    United States
Fixed Price: About $20   |  Posted: 8h, 56m ago  |  Ends: 14d, 15h  |   6 Proposals
I have got a floor plan from architect and want to convert the same into 3D. Total area of the plan is 58sq meter with two room, toilet, kitchen and stairs. Those who are expert in this can apply. You must be an architect. I will upload the PDFs of plan tomorrow. Regards
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

Y****pta
 [?]
Sign in to view client's details.
| Y****pta
|    India
Hourly Rate: $20 - $30 / hr   |  Duration: 1-2 weeks  |  Posted: 10h, 3m ago  |  Ends: 14d, 13h  |   13 Proposals
I have some CAD models that are very basic, non-colored 3D models in the shape of trophies. I need to hire someone to add color and designs to them for use in a promotional video. There are three different trophy models, two just need to have color added and the third needs to have six different designs applied (baseball, basketball, soccer, golf, bowling, and tennis).
Category: CAD       
Skills: ArchiCAD, 3D Systems       

Q****dio
 [?]
Sign in to view client's details.
| Q****dio
|    United States
Hourly Rate: Less than $10 / hr   |  Duration: 1-2 weeks  |  Posted: 10h, 41m ago  |  Ends: 14d, 13h  |   4 Proposals
I have archicad 16 file. My bimx exporter doesn't work anymore, and I need someone to export it to bimx file. It is 10 seconds job.
Category: Architecture       
Skills: ArchiCAD, Architecture       

N****jza
 [?]
Sign in to view client's details.
| N****jza *
|    Serbia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 10h, 58m ago  |  Ends: 14d, 13h  |   35 Proposals
Hi, I am looking for a mechanical drafter to hire by the hour or piecemeal who is capable with Solidworks/CAD to generate some parts from scratch (based on our input) but also to manipulate existing drawings, make minor changes, and generate high quality renderings for marketing images.
Category: 3D Modelling       

h****hot
 [?]
Sign in to view client's details.
| h****hot
|    Canada
Fixed Price: Not Sure   |  Posted: 14h, 21m ago  |  Ends: 14d, 9h  |   9 Proposals
I have qty4 picking system racks that will need to be designed complete with drawings and part lists. I would need these designs complete in 1 week after awarded the job. I would prefer the designs be constructed with Solidworks. Attached are detailed specifications on each application. I also can provide pictures of existing applications once awarded the job. I must stress that i must have all designs completed in 1 week once awarded.
Category: 3D Modelling       

B****W32
 [?]
Sign in to view client's details.
| B****W32
|    United States
Fixed Price: Not Sure   |  Posted: 14h, 52m ago  |  Ends: 14d, 9h  |   0 Proposals
In the attached papers in ELISA, synthesized peptide or selected pool from library DNAs used. I want flowchart how library DNAs applied and used in ELISA. I am unwilling to use synthesized peptide.
Category: Chemical Engineering       

n****how
 [?]
Sign in to view client's details.
| n****how
|    Bangladesh
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 18h, 3m ago  |  Ends: 14d, 5h  |   13 Proposals
Hi, I'm looking for an engineer to assist me with some research tasks. Please see the attachment. Regards Milad
Category: Mechanical       
Skills: Mechanical Engineering       

D****eld
 [?]
Sign in to view client's details.
| D****eld
|    Australia
Hourly Rate: $25 - $36 / hr   |  Duration: 7-9 months  |  Posted: 18h, 37m ago  |  Ends: 89d, 6h  |   3 Proposals
New Vision Learning Services is currently accepting applications for online Science instructor with profound experience to teach highly motivated students. This is a great opportunity for you to supplement your income or to keep your skills fresh by teaching part-time courses online. About us We are an online education provider that offers a thoughtful and comprehensive online solution for students in grades K-12. Our typical student is aged 6-15. Selected instructors will be able to work from home or anywhere you wish as long as you have good internet access, all classes are home based. We offer you A competitive base rate per class. Small classes comprised of 2-4 students aged 6 or older. Each class is comprised of students with similar levels of English ability. Basic cultural competency training focused for an educational setting. Full training on our preferred web conferencing software. Instructor Responsibilities To teach students Science (primary or middle school in Engli...
Category: Chemical Engineering       
Preferred Location: North America, Western Europe, Eastern Europe, Africa, Australia/Oceania

N****ing
 [?]
Sign in to view client's details.
| N****ing
|    China
Fixed Price: Less than $500   |  Posted: 22h, 36m ago  |  Ends: 14d, 1h  |   5 Proposals
I am looking for a manufacturer that can provide me with prototypes of an iPad case/strap made out of rubber/silicone. I have 3 professionally made 3d images bad on my design to provide you with. I can give approximate sizes but without knowing how soft or flexible the rubber/silicone material is i will need to rely on the manufacturers knowledge and help with their materials. Initially i would only be looking for 3 prototypes for the Kindle or iPad mini designs. Please contact me with an approximate price, time frame and any information you feel may be useful relating to the process.
Category: Product Design       
Skills: Manufacturing       

w****dia
 [?]
Sign in to view client's details.
| w****dia
|    Australia
Fixed Price: Not Sure   |  Posted: 23h, 29m ago  |  Ends: 2d, 0h  |   27 Proposals
I have a PCB that needs a redesign + improvement. It will need to be coded from scratch but it's a simple device. Looking for someone who can do it within 2 weeks as it's a priority job.
Category: Electrical       

t****gak
 [?]
Sign in to view client's details.
| t****gak
|    Australia
Fixed Price: $75 or less   |  Posted: 23h, 52m ago  |  Ends: 14d, 0h  |   12 Proposals
I have a design consisting of a metal and plastic part that is snapped together. I need an FEA analysis completed to determine the design will withstand 1,000 cycles given a set displacement of the ends. Model can be given in multiple formats. Native files are solidworks 2014. The assembly will have 2 components, one metal and one plastic. The parts are semi-circular in shape. NDA will be required.
Category: Mechanical       

t****eng
 [?]
Sign in to view client's details.
| t****eng
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job