Save this Search
     
Sort by:
  • Posted Date
Time Left: Less than 24 hours
Fixed Price: Less than $500   |  Posted: 5h, 55m ago  |  Ends: 18h, 4m  |   10 Proposals
I will provide a rough sketched out floor plan which you can simply copy. I need TWO versions... I need it to be redrawn and the words written in but no measurements - with no furniture and another one with the furniture drawn in as already in the illustration. I'm providing the drawing, so I think $20 is fair to just copy something for me. I would be willing to pay an extra for a 3D illustration with the furniture included. Let me know what the cost would be. ***DEADLINE IS WEDNESDAY AFTERNOON ***** I will likely close this job by the morning and pick someone then. Everything needs to be done (jpg and pdf) by 5pm EST (Toronto, Canada time) on Wednesday. You do not have days and days to do this one page of tracing. Do not write to me and say it will take you 3-7 days or I will delete your proposal for not reading.
Category: Architecture       

a****sso
 [?]
Sign in to view client's details.
| a****sso
|    Canada
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 04, 2015  |  Ends: 17h, 19m  |   0 Proposals
We are in the construction drawing stage of a residential property development in Canberra, Australia. We are looking for a licence buildin certifier, or recommendation.
Category: Other - Engineering &...       
Skills: 3D Modeling, Manufacturing Design, sql dba       
Preferred Location: Australia

S****747
 [?]
Sign in to view client's details.
| S****747
|    Australia
Fixed Price: Less than $500   |  Posted: May 04, 2015  |  Ends: 15h, 2m  |   13 Proposals
I need separate parts for a male mannequin. Top torso = Neckline, Shoulders and Arms Bottom Torso = Waist area & Thighs I need to be able to adjust the measurements. Need quick turn around time.
Category: CAD       
Skills: 3D Modeling, AutoCAD       

b****tam
 [?]
Sign in to view client's details.
| b****tam
|    United States
Fixed Price: Not Sure   |  Posted: Apr 29, 2015  |  Ends: 10h, 7m  |   21 Proposals
I need 100 of these two parts milled from aluminum.   [obscured]  /parts/Mercedes-Triangle-Ball.PDF   [obscured]  /parts/Mercedes-Triangle-base.PDF Prefer someone in the US but will consider other places if the price is right.
Category: Contract Manufacturing       
Skills: Manufacturing Design, SolidWorks       

t****eee
 [?]
Sign in to view client's details.
| t****eee
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 22, 2015  |  Ends: 23h, 16m  |   13 Proposals
Hello, I am looking for design help with making a soft goods prototype to use for customer testing. My product is to be used on car seats, strollers, and high chairs. So far, I have made a rough prototype out of everyday materials to test for functionality but now I am looking for an aesthetically pleasing model in which all kinks are worked out. Please detail your approach to jobs similar to this one. I'm ready to get this project started right away. I look forward to speaking with you.
Category: Product Design       

L****ard
 [?]
Sign in to view client's details.
| L****ard
|    United States
Fixed Price: Less than $500   |  Posted: Apr 21, 2015  |  Ends: 19h, 56m  |   16 Proposals
Need an Autocad 2014 drafter to generate a Grading/Drainage plan based on on an existing survey(ACAD-Job 1182 Augustine St.DWG) and marked up image(IMG_2433(1).jpg). The plan needs to depict 1. Topo contours 2. Elevations for pad 3. Point elevations for down spouts and drains Need this generated on 24x36 layout with proper title block, legend. The final file should be in AutoCAD 2014 format. This needs to be completed in 24 hrs after accepting the proposal. 1. Contour lines from survey 2. Use the attached ONSITE SH4 Grading() as a sample 3. Use the detail & notes for SPLASH BLOCKS, Pop up Emitter
Category: Civil & Structural       
Skills: AutoCAD, Civil Engineering, Drafting       

d****lok
 [?]
Sign in to view client's details.
| d****lok
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 21, 2015  |  Ends: 18h, 17m  |   7 Proposals
We need to design a small device to open the lid of a clam shell shaped box that contain semiconductor wafer in a cassette. Since this will be used in high level "Clean Room" we can use only motor or vacuum pneumatic devices since other motion device may generate dust particles. We can advise how to design and what device or materials to use in general. There are other requirements such as small volume is allowed. Please see attached photo of the box and lid.
Category: Mechanical       

r****sol
 [?]
Sign in to view client's details.
| r****sol
|    United States
Hourly Rate: Less than $10 / hr   |  Duration: 3-4 weeks  |  Posted: Apr 21, 2015  |  Ends: 15h, 37m  |   2 Proposals
-Analysis of Bayesian Methodology -Interpretation of a Bayesian Model and Partial Order Classification Model -Gibbs Testing -Monte Carlo
Category: Other - Engineering &...       

e****me1
 [?]
Sign in to view client's details.
| e****me1
|    United States
Fixed Price: Not Sure   |  Posted: Apr 21, 2015  |  Ends: 14h, 43m  |   2 Proposals
I need help with a loudspeaker design. I have designed the outer cosmetic case but need some help with designing the sealed inner cabinets. I currently have 3d renders of the outer image. The loudspeaker is a 3 way floorstander containing 1 x 11" bass 1 x 5" midrange 1 x 2" tweeter If it is possible I would like some help (not redesigning the wheel) but creating a dedicated inner cabinet for each drive unit, rather than just boxing them in I feel it would be better to create an inner cabinet that will allow the driver to work more naturally.
Category: Product Design       

A****rth
 [?]
Sign in to view client's details.
| A****rth
|    United Kingdom
Fixed Price: $500 - $1,000   |  Posted: Apr 21, 2015  |  Ends: 13h, 44m  |   12 Proposals
I want to re-design the LED in-car message sign, see attached. I want it to be 16" in length and 2" in width. It will be attached by suction to the inside of the rear windscreen and lights up when the appropriate button is pressed on the remote control to show "THANK YOU" or "SORRY" . It will be controlled by wireless remote control, powered by AA batteries, attached to the steering wheel. The car sign itself will also be powered by AA batteries. I need an experienced product designer, with knowledge of LED technology.
Category: Product Design       
Skills: Product Design, Product Development       

F****rey
 [?]
Sign in to view client's details.
| F****rey
|    United Kingdom
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 21, 2015  |  Ends: 13h, 32m  |   7 Proposals
Need a materials engineer to help design a new product. Experience with sound proof/sound reduction materials useful. Payment negotiable.
Category: Product Design       
Preferred Location: United States

A****NYC
 [?]
Sign in to view client's details.
| A****NYC
|    United States
Fixed Price: Less than $500   |  Posted: Apr 21, 2015  |  Ends: 12h, 9m  |   28 Proposals
I want to create an actual 3D building model from a building. (size should be 8 inches by 10 inches) I have the CAD files. I do not want just a picture or a flat building. I want a full building built in small with all 4 sides (like the attached picture) thanks
Category: 3D Modelling       
Skills: 3D       

s****liw
 [?]
Sign in to view client's details.
| s****liw
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 21, 2015  |  Ends: 9h, 48m  |   9 Proposals
I am looking for an engineer to design a cigar humidor. I will give out more information after i select certain candidates. You must be fluent in English and have a portfolio to show me. Any experience designing with wood helps as well.
Category: Other - Engineering &...       

m****kol
 [?]
Sign in to view client's details.
| m****kol
|    United States
Hourly Rate: $15 - $20 / hr   |  Duration: Not Sure  |  Posted: Apr 21, 2015  |  Ends: 7h, 59m  |   4 Proposals
I am looking for someone to create musical arrangements for some of my original kids songs. Preferably, guitar, bass. keyboard.
Category: Other - Engineering &...       

m****ose
 [?]
Sign in to view client's details.
| m****ose
|    Japan
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 21, 2015  |  Ends: 7h, 21m  |   12 Proposals
Our plant is active and we are always adding new instruments or changing the way the plant will run. interlocks, PID's, and things of that sort. Would you be interested in helping us from time to time as we make small changes or add something to our Automation. We run RSLOGIX 5000 with RSViewSE. DEVICENET AND CONTROLNET
Category: Other - Engineering &...       
Skills: PLC Programming       

g****ell
 [?]
Sign in to view client's details.
| g****ell
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 21, 2015  |  Ends: 6h, 20m  |   12 Proposals
Prototype needed for an umbilical cord clamp - for use in deliveries complicated by the presence of meconium. The design is an extrapolation of the current clamp that is typically used. I can send you multiple single clamps for use. What I need is a few prototypes of the cord clamp described in the upload.
Category: Other - Engineering &...       
Skills: Manufacturing Design       
Preferred Location: North America

M****th1
 [?]
Sign in to view client's details.
| M****th1
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 21, 2015  |  Ends: 6h, 7m  |   18 Proposals
Dear Sir, We have a new steel warehouse that have to be installed on an old concrete slab. We would like to make a new concrete slab on the old one and put binding concrete at the workshop pillars localization. We are seeking for someone who will be alble to do the calculation of the concrete slab and binding concrete. This is the job that we intended to do on the old concrete slab: 1. Scarification of the existing concrete slab; 2. Breaking of the slab and excavation at the localization of pillar workshop loads ; 3. Pouring of binding concrete at the localization of workshop pillars (14 units). 4. Concrete formwork, steel reinforcement of the periphery of the space (26000 x 22000 mm) ; 5. Concrete formwork, steel reinforcement, and pouring of concrete pillars footings with pominence. (150) ; 6. Pouring of the peripheries, levelling of the old concrete slab ; 7. Steel reinforcement of the whole area (26000x22000 mm) ; 8. Pouring of the concrete slab with vibrated concrete and...
Category: Civil & Structural       

l****sck
 [?]
Sign in to view client's details.
| l****sck
|    Belgium
Fixed Price: Not Sure   |  Posted: Apr 21, 2015  |  Ends: 5h, 16m  |   5 Proposals
I need help designing a touch panel module. I need to be able to have multiple touch features (touch panel buttons) and also have feedback display.
Category: Electrical       

A****rth
 [?]
Sign in to view client's details.
| A****rth
|    United Kingdom
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 21, 2015  |  Ends: 4h, 54m  |   11 Proposals
We have a few jobs which require a dedicated experienced estimator who can complet material takeoff estiamtes and provide indicitive construction hours for exhibition stand display construction. The role would be suited to someone with previous experience in custom joinery or exhibition/museum or shopfitting style takeoffs. You will need to provide qty takeoffs for the following material types: - MDF - laminate - 2 pak - glass - painting - digital print graphics Please send me examples or information on your previous experience. Joel
Category: Interior Design       
Skills: ArchiCAD, estimating       

I****cus
 [?]
Sign in to view client's details.
| I****cus
|    Australia
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job