Save this Search
     
Sort by:
  • Posted Date
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 31, 2015  |  Ends: 22h, 29m  |   20 Proposals
We are moving into a 900 square foot open office and I would like to get a proper layout done. I will provide the current floor plan and measurements, and our requirements (we have software developers, plus customer support people, plus I need an office). All I need is the layout drawn up. I would like a few different concepts. Please let me know your price to do this project. We can go hourly (with a not to exceed) or fixed price. Thanks. Mike
Category: Interior Design       
Skills: Interior Design       

b****738
 [?]
Sign in to view client's details.
| b****738
|    Canada
Fixed Price: Not Sure   |  Posted: Mar 26, 2015  |  Ends: 15h, 39m  |   3 Proposals
Hi I want to create a silicone product of a certain colour, however initial trials of the colour have features that we do not want. Im looking for someone who could offer advise about an appropriate pantone colour to use to get the result we want. should be a very quick job for someone who is an expert in the field. thanks!
Category: Other - Engineering &...       

m****ynz
 [?]
Sign in to view client's details.
| m****ynz
|    New Zealand
Fixed Price: Less than $500   |  Posted: Mar 18, 2015  |  Ends: 21h, 41m  |   8 Proposals
Firmware for atsamd21g16a: 1- Communication with Atmel and RFduino using TWI (SDA, SCL) 2- Multiple pulses (F= 1- 2000Hz, PW = 25Ás - 400Ás ) More in Specifications
Category: Electrical       
Skills: Electrical Engineering, Electronics       

s****oob
 [?]
Sign in to view client's details.
| s****oob *
|    Germany
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 18, 2015  |  Ends: 21h, 40m  |   28 Proposals
Project Overview: Create Revit file of referenced portion of building from AutoCad file. Build exterior building siding/window/doors/column,etc. components as illustrated in attached documents so that the Revit file can be rendered 3-Dimensional. New Exterior Specifications: Refer to Siding Illustrations 1 & 2. Use the 7" wide flush wall panels horizontally where the horizontal siding is installed currently. Use the composite square panels on columns and where shown on colored sketch renderings. Deliverables must include: 3D Renderings of areas shown Revit file returned to me for my records
Category: 3D Modelling       
Skills: 3D, 3D Modeling, 3D Rendering, 2D Design       

S****one
 [?]
Sign in to view client's details.
| S****one
|    United States
Fixed Price: Not Sure   |  Posted: Mar 18, 2015  |  Ends: 21h, 0m  |   9 Proposals
In this work, a way to determine the maximum limit to transfer power of AC transmission systems based on the stability of the voltage. In addition, six different schemes will be studied using series and shunt compensation. MATLAB/SIMULINK software will be used to construct the system and the six schemes. The effect of load power factor, line loss, line length and the degree of the series and shunt compensation will be taken into account during the results analysis. Also, the relationship between the maximum limit to transfer the power and these factors will be found and discussed. five schemes are presented within the attached paper, while the sixth scheme is presented within the attached word file.
Category: Electrical       
Skills: MATLAB, Simulink       

m****lab
 [?]
Sign in to view client's details.
| m****lab
|    Jordan
Fixed Price: Not Sure   |  Posted: Mar 18, 2015  |  Ends: 18h, 59m  |   4 Proposals
I need architectural designs for plumbing and electrical for a commercial property 4018 SQF. The property already has plumbing and electric. I am adding plumbing for 9 rooms (hand sink in each of 8 rooms and bathroom with fixtures for shower, toilet, 2 sinks and urinal). I am also adding electric for one room. The architectural designs must be stamped by certified and registered engineer/architect to be presented to proper authorities for obtaining plumbing and electric permits.
Category: Architecture       
Preferred Location: United States

a****h88
 [?]
Sign in to view client's details.
| a****h88
|    United States
Fixed Price: $500 - $1,000   |  Posted: Mar 18, 2015  |  Ends: 17h, 31m  |   15 Proposals
Development of hard and firmware for a remote controlled BLE switch minimal cost BLE SoC from Ti or Nordic PCB design in Altium, Firmware and debugging PCB Prototype production Testing
Category: Electrical       

w****an1
 [?]
Sign in to view client's details.
| w****an1
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: Mar 18, 2015  |  Ends: 13h, 33m  |   21 Proposals
design new thermos productJob Description:We're looking for a product designer and developed .We wish to develop our vacuum flask product (plastic or stainless steel ) in innovative design (new function ) ,not only a nice new shape. We're export company in China and in field of vacuum flask industry for more than 8 years .We sell our goods to europe country ,mideast country. If you feel interest to the job and have a confident to it ,please don't be heistate to contact us .Thank you.
Category: 3D Modelling       

c****ygm
 [?]
Sign in to view client's details.
| c****ygm
|    China
Fixed Price: Less than $500   |  Posted: Mar 17, 2015  |  Ends: 10h, 34m  |   9 Proposals
USA Based designers ONLY (I have to mail a part to the freelancer who gets the job to measure and use for the design so for that reason I will only be picking USA based freelancers for this job.) This project is doing four things: 1) Need a new design made based off sketch ideas for a pre-existing rifle butt end. 2) Need the new design to be 3D printed so that it can be tested on the actual rifle to see if it works. 3) files will later be used to make a hard plastic with overlay rubber mold and metal version of the 3D design. Job and price include design, printing and shipping the 3D project to Boston MA. **** MUST HAVE A 3D PRINTER **** simple design work required. Amount of printing is small in size, about 5" H x 2" Wx 3" Thick. Will pay $150 for the project printed and delivered.
Category: 3D Modelling       
Skills: 3D, AutoCAD, 3D Printing       

W****MMA
 [?]
Sign in to view client's details.
| W****MMA
|    United States
Fixed Price: Less than $500   |  Posted: Mar 17, 2015  |  Ends: 10h, 1m  |   17 Proposals
**Must have consumer hardware development experience** Goal is to have (1) 2D and 3D designs and (2) prototype a telescoping apparatus with locking sections when fully extended with internal weighting toward distal end. No less than 15" when compact, extend to no more than 30" in total length. It is important that the locking system, allowing the sections to extend and lock, is simple and consumer-friendly...be creative! Must also lock all sections in place when compact too. Materials must be lightweight and durable - graphite, carbon fiber or equivalent. Engineers to submit time and budget proposal. More details and measurement will given to selected partner.
Category: Mechanical       

j****g10
 [?]
Sign in to view client's details.
| j****g10
|    United States
Fixed Price: $70 - $140   |  Posted: Mar 17, 2015  |  Ends: 6h, 14m  |   16 Proposals
I have designed a Miniature lock and i am looking for a 3D/Mechanical Engineer to help me reach functionality. Possible changes are required, the lock has been prototyped but there are a few issues with functionality/stability. looking for an engineer to help me reach functionality and also help me create a function diagram, to demonstrate the movements in order to avoid excess prototyping costs.
Category: Other - Engineering &...       

G****eS7
 [?]
Sign in to view client's details.
| G****eS7
|    United Kingdom
Fixed Price: Not Sure   |  Posted: Mar 17, 2015  |  Ends: 6h, 3m  |   4 Proposals
I have been working on an underwater propulsion device for the past few months. The device has come a long way to completion, however, I am, once again, in need of a mechanical engineer to help with fine tuning an existing prototype and further developing accessories for the device. Ideally I am looking for someone to help on contractual basis, but to also stay on board long term for input and help and further work. I am looking for someone within driving range of San Diego, preferably a Mechanical Engineer with lots of SolidWorks experience and preferably with some experience with underwater devices, waterproofing and seals. Knowledge of water propulsion is a huge asset. Absolutely no long distance hires, and no one who is trying to "squeeze" me into their busy schedule. References and a strong portfolio of consumer products is a must.
Category: CAD       
Preferred Location: United States

h****esh
 [?]
Sign in to view client's details.
| h****esh
|    United States
Fixed Price: Not Sure   |  Posted: Mar 17, 2015  |  Ends: 5h, 30m  |   3 Proposals
Hi, I am looking for someone to take my invention to the next level, You will have to sign a Non Disclosure Agreement before I can give you the full brief. We will soon launch a lingerie retail company based around a patented measuring bra. When a customer goes onto our website and orders a bra we will overnight ship to her a patented measuring bra that comes in four standard sizes, small, medium, large and full figured. When she gets the measuring bra, she puts it on, make adjustments in conjunction with the website or phone app. When it fits perfectly she enters the numbers on the adjusters into the website. When her bra arrives it is guaranteed to fit. We have three versions of the bra and the patent drawings, we need a final design that we can take to market. You will need to design, using industrial design principles, a measuring tool based on our concept that looks great and fulfils the criteria.
Category: Product Design       
Skills: 3D Design, Textile Engineering, 2D Design       

T****Nel
 [?]
Sign in to view client's details.
| T****Nel
|    Australia
Fixed Price: Less than $500   |  Posted: Mar 17, 2015  |  Ends: 4h, 1m  |   17 Proposals
Hello, I have 2 different sets of 3D Gloves with a small mechanical application in Each that needs to be 3D Modeled. I want it modeled in SolidWorks 2013 or EARLIER only. so you are betting on 2 different designs of glove modeling in Solidworks. Happy bidding
Category: 3D Modelling       
Skills: 3D Modeling, SolidWorks       

j****lob
 [?]
Sign in to view client's details.
| j****lob
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jan 02, 2015  |  Ends: 19h, 55m  |   2 Proposals
We're a UK footwear brand with manufacturing facilities in Portugal. We're looking for someone based in Portugal to source, manage and liaise with new suppliers and manufacturers for a range of products and services. Knowledge of the following manufacturing industries in Portugal/Spain would be beneficial - - Textiles - Footwear - Clothing/Accessories - Consumer Packaging
Category: Other - Engineering &...       
Preferred Location: Portugal

h****orc
 [?]
Sign in to view client's details.
| h****orc
|    United Kingdom
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job