Save this Search
     
Sort by:
  • Posted Date
Time Left: Less than 3 days
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 29, 2015  |  Ends: 10h, 27m  |   9 Proposals
Need someone to create a resubdivision plat based on old subdivision plat and deed. Basically looking to combine to adjacent lots. Thanks
Category: CAD       
Skills: 3D Modeling, AutoCAD       
Preferred Location: United States

e****726
 [?]
Sign in to view client's details.
| e****726
|    United States
Fixed Price: Less than $500   |  Posted: Mar 29, 2015  |  Ends: 1d, 7h  |   11 Proposals
I have one bass bait (see attachment - mine will be similar to the top sweet beaver bait) that I need 3d laser scanned. Of course, I will have to send you some samples. Then, I need you to convert the scan into a 3d model and provide me either step or iges files. I plan to source job right away, but of course I will need to send you the bait samples to work with. This could also lead into having you do a mold design. Thanks - looking forward to reviewing your proposals. Brent Robbins Lunker Mania Baits, LLC Michigan - USA
Category: 3D Modelling       
Skills: 3D, 3D Scanning, 3D Design       

Y****haa
 [?]
Sign in to view client's details.
| Y****haa
|    United States
Fixed Price: Not Sure   |  Posted: Mar 28, 2015  |  Ends: 5h, 32m  |   9 Proposals
Embedded Systems Engineer needed to develop a Wearable GPS Navigation device for Startup. The device should include micro controller, GPS receiver, accelerometer, and flexible display. Should be capable of storing approx 100MB in map data.
Category: Contract Manufacturing       
Skills: Embedded Systems       

s****795
 [?]
Sign in to view client's details.
| s****795
|    United States
Fixed Price: Not Sure   |  Posted: Mar 26, 2015  |  Ends: 1d, 23h  |   1 Proposal
Hi I want to create a silicone product of a certain colour, however initial trials of the colour have features that we do not want. Im looking for someone who could offer advise about an appropriate pantone colour to use to get the result we want. should be a very quick job for someone who is an expert in the field. thanks!
Category: Other - Engineering &...       

m****ynz
 [?]
Sign in to view client's details.
| m****ynz
|    New Zealand
Fixed Price: Less than $500   |  Posted: Mar 25, 2015  |  Ends: 22h, 59m  |   44 Proposals
Hi I require a basic plan with finisher for a bank loan. Please see attached pictures. I would like it like the picture less the bits canceled. I would need room sizes and finishers. Thanks Sealan
Category: Architecture       
Skills: 3D Modeling, ArchiCAD, Architecture, AutoCAD, SketchUp       

K****aIS
 [?]
Sign in to view client's details.
| K****aIS
|    South Africa
Fixed Price: Less than $500   |  Posted: Mar 25, 2015  |  Ends: 21h, 36m  |   5 Proposals
Hi, I require a professional research proposal (3-4 pages), which includes viable and latest references (journal and conferences) in relation to: Stretchable / flexible Radio frequency IDs possible applications to such design. Aik
Category: Electrical       
Skills: Electrical Engineering, Electronics, RFID       

a****821
 [?]
Sign in to view client's details.
| a****821
|    Australia
Fixed Price: Not Sure   |  Posted: Mar 24, 2015  |  Ends: 7h, 16m  |   58 Proposals
We are looking for an architect with excellent skills and imagination for the design and a general layout and plot plan of a villa. A detailed map will be supplied to the winning bidder. DXF and DWG files can also be supplied. Please see attached for further information.
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

g****gns
 [?]
Sign in to view client's details.
| g****gns
|    Germany
Fixed Price: Not Sure   |  Posted: Mar 19, 2015  |  Ends: 2d, 20h  |   15 Proposals
We have a lifting beam that we seek to be rated to a working capacity of 5 tonnes (5 tonne SWL). An initial design assessment is to be provided to attempt to confirm a 5T SWL. If this assessment proves the SWL to be less than 5T, the assessment will continue to be performed to confirm the SWL, which can be rounded down to the nearest 0.5T increment. Knowledge of Steel Design and Standards is necessary so appropriate load factors are incorporated into the design, such as the critical load cases and proof test loads. Material grades and dimensions have been provided in the attached word document - please refer to this document. We seek for someone to perform the design calculations and provide a detailed report showing justification of the design. If there are any further questions, please ask, thanks.
Category: Civil & Structural       

F****Eng
 [?]
Sign in to view client's details.
| F****Eng
|    Australia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 18, 2015  |  Ends: 2d, 18h  |   14 Proposals
I need some one to analyze cut and fills using cad product that will analyze cad topos, Then we want to be able to make changes and see how it changes the quantities.
Category: Civil & Structural       
Skills: 3D, AutoCAD, Civil Engineering, BASINS       

t****fix
 [?]
Sign in to view client's details.
| t****fix
|    United States
Hourly Rate: More than $50 / hr   |  Duration: 1-2 weeks  |  Posted: Mar 18, 2015  |  Ends: 2d, 15h  |   9 Proposals
I'm looking for calculations and guidance for a job we have been awarded. This job has been permitted but the engineering for this portion is week. This is a stairway to a basement from the 1st floor. We must close this staircase access to put a closet flush to the first floor. Their is other access points to the basement. See picture. A concrete slab must be laid flush to the first floor level. The original design and work has been done (see plans) S3 (Opening 2&3). The wall opposite the entrance to the stairwell is approximately 2 feet above the first floor level. This means that we have to place some kind of structural wall there to hold the supports for the slab. Your job is to be handle this and ensure all calcs and design work structurally. Final measurements will be determined during the job.
Category: Civil & Structural       

d****o44
 [?]
Sign in to view client's details.
| d****o44
|    United States
Fixed Price: Not Sure   |  Posted: Mar 18, 2015  |  Ends: 2d, 15h  |   7 Proposals
Hello, Looking to have standard pill bottle and cap printed using PP materials. Specially, white cap and orange bottle. Thanks, Don
Category: Other - Engineering &...       

s****don
 [?]
Sign in to view client's details.
| s****don
|    United States
Fixed Price: Not Sure   |  Posted: Mar 18, 2015  |  Ends: 2d, 14h  |   14 Proposals
PCB, four layers: 1:Top, 2:GND, 15:Power, 16:Bottom PCB, 5 cm wide. Size and shape are fixed. They cannot change. Must meet Elecrow DRU. Software: Eagle 7.2 (MANDATORY) Library of components will be provided. Complete BOM and Eagle 7.2 schematic will be provided. Board outline and pre-placement of components that cannot be moved will be provided. BOM Overview: - a USB connector - a battery charger IC - a BLE module - a FTDI USB-RS232 bridge - a step-down IC - a step-up IC - a level-translator - a quad-buffer - an accelerometer IC - an EEPROM IC - some MOSFET - a crystal - some resistors, caps, inductances, leds mostly in 0603 nothing smaller. - total about 369 SMD nets - almost all components excepted a RFI finger, 5 leds and the USB connector will have to be on top. There will be up to 1.5A on some traces therefore the routing will have to be done accordingly. Picture below shows rev A of the PCB. Most the of components have changed to alternate IC with similar functionality there...
Category: CAD       

T****tin
 [?]
Sign in to view client's details.
| T****tin
|    Canada
Fixed Price: Less than $500   |  Posted: Mar 18, 2015  |  Ends: 2d, 13h  |   32 Proposals
We have created a new product using Blender to do all the drawings. Unfortunately, when we talked to a number of manufacturer, they all have problem reading our files or converting them into ones that they can use for manufacturing process. Right now, we are looking to make the prototype of the product and after that it will leave to production. We need someone who has the expertise of product manufacturing and has worked with manufacturer and understand the type of files they need and the requirement and assist us in converting our files or editing them so that the product can be manufactured without making much change to the actual design. It's a technology product
Category: 3D Modelling       
Skills: 3D, Manufacturing       

a****nma
 [?]
Sign in to view client's details.
| a****nma
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 18, 2015  |  Ends: 2d, 12h  |   13 Proposals
The goal is to make it easy to track how much time people at desk jobs spend actually working and how much time they are distracted. So, I need a design I can send to a manufacturer of a clock with two digital clock displays, one above in green print labeled "work" and one below in red print labeled "idle." There will be two buttons. One large button should be to switch from work time to idle time and visa versa. When pressed, whichever timer is currently running will pause and the other timer will resume counting in increments of seconds. There should be another section of the display that counts each time the user switches from work to idle. The other button will reset everything to zero.
Category: Product Design       

d****ner
 [?]
Sign in to view client's details.
| d****ner
|    United States
Fixed Price: $500 - $1,000   |  Posted: Mar 18, 2015  |  Ends: 2d, 12h  |   18 Proposals
This CFD project involves FSI simulation in CFD, in specific, transfer hydraulics fluid energy to mechanical energy, to drive the turbine blade rotation. The modeling will include fluid flow modeling, surface pressure modeling, and blade rotation modeling (driven by flow pressure acting on the surface). Both fluid and structural properties will be provided. This job is only offered to well experienced engineer with extensive knowledge in FSI and CFD fields.
Category: 3D Modelling       

v****cfd
 [?]
Sign in to view client's details.
| v****cfd
|    United States
Fixed Price: Less than $500   |  Posted: Mar 18, 2015  |  Ends: 2d, 12h  |   17 Proposals
I need someone to redo some estimates for me of a BOQ for a power house contraction ground foundation. I have Powerhouse drawing size, Land drawings, BOQ with list of task and price per unit. The BOQ is to determine the cost of constructing the foundation (excavation, concreting etc) for the power house based on the drawings that i will provide.
Category: Civil & Structural       

m****011
 [?]
Sign in to view client's details.
| m****011
|    United Kingdom
Hourly Rate: More than $50 / hr   |  Duration: 3-4 weeks  |  Posted: Mar 18, 2015  |  Ends: 2d, 10h  |   34 Proposals
Job Background Freelancers will be asked to create a small electronic device using 3D renderings and CAD. Experience in Engineering such as electronic and/or mechanical is ideal. Details will be disclosed to suitable candidates, after signing a non-disclosure agreement. Job Description ? Proficient in 3D Rendering ? Proficient in 3D Animation ? Experience in Electrical Engineering ? Ability to use 3D CAD software and/or Photoshop programs ? Tri-state area preferred
Category: CAD       

J****101
 [?]
Sign in to view client's details.
| J****101
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 18, 2015  |  Ends: 2d, 10h  |   6 Proposals
This job entails the research and evaluation of previously formulated photorefractive polymers for the recording of patterned refractive index modulation with a view to a suitable polymer then being prototyped in a lab. The general parameters are as follows: 1. the photorefractive compound is preferably a polymer, 2. it may be doped with graphene, C60 or other sensitiser, 3. more than one chromofore type may be used, 4. there may be a stack of thin photorefractive layers to increase diffraction efficiency, 5. the voltage across each layer must be less than 70V, 6. the recording laser power must remain within class I, 7. quantum dot nano-crystals may be used to increase recording laser wavelength absorbency, 8. the recording wavelength is preferably at 850nm, 9. the photorefractive polymer is above 50% transmissive, 10. the index modulation recording time is on the order of milliseconds, 11. the photorefractive recording erasure time is on the order of milliseconds, 12. the active area...
Category: Other - Engineering &...       

b****eda
 [?]
Sign in to view client's details.
| b****eda
|    Ireland
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job