Save this Search
     
Sort by:
  • Posted Date
Fixed Price: Less than $500   |  Posted: 10h, 13m ago  |  Ends: 1d, 13h  |   15 Proposals
Hey We are creating a Rabbit Hutch.. but will need some help with the design. Please let me know if you can help.. Thanks. Dave G:
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

T****rUS
 [?]
Sign in to view client's details.
| T****rUS
|    United States
Fixed Price: Less than $500   |  Posted: 14h, 23m ago  |  Ends: 2d, 9h  |   17 Proposals
We are by far the largest visualization firm in the USA. We receive new projects every week and we are looking for multiple providers to join our team. Currently we have several huge projects that needed to be completed ASAP and we are looking for the BEST 3D talents to join our team. QUALITY is a MUST! This is a long term position and we are only interested in someone who can work as a team! We have our own in-house 3D Artists and they are some of the best in the industry. The reason we are here is because we have too much work and we need more 3D artists to join our team. Sharing file is how we work and that is how we can make changes and finish the work faster!! Please DO NOT apply if you are not planning to share files! Contact us ASAP if you are interested. Add this line (Project 7738-7799) to your proposal so we know you have read our requirement. *All proposals that do not include this line will be rejected. IMPORTANT NOTE: If you lie about your portfolio DO NOT take this jo...
Category: Interior Design       
Skills: Illustration, Interior Design, 3D Rendering       

c****usa
 [?]
Sign in to view client's details.
| c****usa
|    United States
Fixed Price: $500 - $1,000   |  Posted: 15h, 19m ago  |  Ends: 2d, 8h  |   27 Proposals
Looking for an experienced industrial designer to create a consumer product enclosure. The product is based on a small (20cm x 10cm) PCB The basic idea is to draft a design, 3d print or build a prorotype and help our team all the way to manufacturing. Please only apply if you have extensive experience in the field. Good luck!
Category: Product Design       

E****eer
 [?]
Sign in to view client's details.
| E****eer
|    Chile
Fixed Price: $1,000 - $5,000   |  Posted: Jul 05, 2015  |  Ends: 1d, 22h  |   17 Proposals
Starcross Consulting is currently seeking architectural services for a residential renovation project located in Washington, DC. We will need a full architectural plan set suitable for permit submittal, similar to the attached (D St. NE). The submittal set will be based on the attached existing condition plan (Spring Rd NW). I have also provided a copy of the "plan submittal checklist" required by the local jurisdiction which specifies what information the ultimate deliverable will need to include. Please note that I have marked the items that will not apply to this project. I am interested in a quick turnaround, so please include your anticipated turn around time in your cost proposal. Feel free to reach out if anything is unclear or requires further clarification. Thanks, Paul D Starcross Consulting
Category: Architecture       

p****ger
 [?]
Sign in to view client's details.
| p****ger
|    United States
Fixed Price: Not Sure   |  Posted: Jul 05, 2015  |  Ends: 15h, 28m  |   6 Proposals
I need an 11 pages assay about software process models. It can be from the internet (resourced most be included) or from your own words but it needs to be 100% correct
Category: Other - Engineering &...       

p****ent
 [?]
Sign in to view client's details.
| p****ent
|    Saudi Arabia
Fixed Price: Not Sure   |  Posted: Jul 02, 2015  |  Ends: 2d, 17h  |   21 Proposals
Create 3D model in CAD software and output into a plastic 3D model. Smarty 3D Printing project. Dimensions: Height (not counting antenna): 9.0" to 12" Outer Diameter of upper body section: minimum of 3.0" (if proportions are kept the same as the jpg drawing it will satisfy this requirement. We are located in the Bay Area in California.
Category: 3D Modelling       
Skills: 3D, AutoCAD, 3D Printing       
Preferred Location: United States

s****007
 [?]
Sign in to view client's details.
| s****007
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: Jul 02, 2015  |  Ends: 2d, 13h  |   10 Proposals
We are looking for a talented FPGA programmer to help us implement a low noise (<10nV/(rootHz)) lock-in amplifier for heterodyne detection of sideband signals. Carrier frequencies range from 0.3 to 1.5MHz. The lock-in amplifier must have the ability to generate signals at specified frequencies and demodulate signals at the sum or difference of two frequencies (FM/heterodyne detection). Your job will be to develop a working prototype that does the following: 1) Takes in signals via a high speed, 16bit ADC 2) Generates a sine wave with programmable amplitude (ranging from 0 to 5V) and frequency, f2 = (1 to 1000Hz) 3) Demodulates the signals at two frequencies f1+f2, f1+2f2. f1 is determined from the ADC input. f2 is the frequency generated in step #2. 4) Outputs the RMS amplitude of the two demodulated signals via a low noise, 16bit DAC. We have an ADC and FPGA eval board already chosen, part #'s AD9268 and HSC-ADC-EVALCZ from Analog. You will need to help us choose the DAC and fi...
Category: Electrical       

N****lIR
 [?]
Sign in to view client's details.
| N****lIR
|    United States
Fixed Price: $50 - $150   |  Posted: Jun 24, 2015  |  Ends: 2d, 22h  |   13 Proposals
Need to design an Ultrasonic motion sensor and notfyer to be installed in the wheel arches of a car. Need the design to be able to build the unit myself. This project is to avoid parking tickets my creating notification when a parking officer marks my car tyres with chalk. When the parking officer moved their hand under the wheel arch the movement will be detected and I will be notified by text, email or key fob beeper. ( Range required approx 500m and within a building) The sensor could be mounted under the wheel arches ( the 2 front) or on the body of the car above the wheel arches. Ideally the components to build the project will be less that $250 and be available from online sellers. I imagine Arduino or rasberry pi will be the best options for a controller. Ideally the unit will be battery powered so I dont have to wire it into the car. With the bulk of the unit being attached to the dash an an on off switch so I can arm the unit when I get out of the car. Ideally the plans ...
Category: Electrical       
Skills: Electrical Engineering, Electronics       

m****b33
 [?]
Sign in to view client's details.
| m****b33
|    Australia
Fixed Price: Not Sure   |  Posted: Jun 24, 2015  |  Ends: 2d, 18h  |   1 Proposal
Completed 10 page CD set for approx. 1,500sf Dental Clinic requires review and stamping by Illinois Licensed Architect for Permit Submittal. PDF's available for review upon request.
Category: Architecture       
Skills: Architecture       

S****one
 [?]
Sign in to view client's details.
| S****one
|    United States
Fixed Price: Less than $500   |  Posted: Jun 24, 2015  |  Ends: 2d, 18h  |   7 Proposals
We need a custom cushion made out of Memory Foam. We have a design ready via .IGS file, and looking forward to receiving any competitive price quotes. Our target time to receive this prototype should be received within 2 weeks. If you need more than 2 weeks to complete this job, let us know a date you could have this delivered, so we may consider.
Category: Other - Engineering &...       

M****e-M
 [?]
Sign in to view client's details.
| M****e-M
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 24, 2015  |  Ends: 2d, 18h  |   21 Proposals
We look on regular base for freelancer who are professional Geomagic Design X user. Based on STL files (geometry + freeform) you have to create parametric CAD-Files (Step + iges). Looking forward to receive your application.
Category: CAD       
Skills: 3D Design       

3****fan
 [?]
Sign in to view client's details.
| 3****fan
|    Germany
Fixed Price: Less than $500   |  Posted: Jun 24, 2015  |  Ends: 2d, 16h  |   19 Proposals
Hi... please see attached document. This is for an ultrasonic sensor firmware design project. Thanks
Category: Electrical       

a****ani
 [?]
Sign in to view client's details.
| a****ani
|    United States
Fixed Price: About $20   |  Posted: Jun 24, 2015  |  Ends: 2d, 15h  |   5 Proposals
I would like you to use a tpa3116d 50w+50w stereo amplifer and give me the results like 1. analysis of power efficiency a. open input + 8 ohm output load b. closed circuit + open output c. analysis of power efficiency 2.connect signal generator to amplifier at 8 ohm load a. use oscilloscope to analyse input signal vs output b. drive at max power 50 watts and provide analysis c. find distortion.
Category: Electrical       

r****m32
 [?]
Sign in to view client's details.
| r****m32
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 24, 2015  |  Ends: 2d, 13h  |   3 Proposals
The Landscape Designer (LD) is responsible for design, drafting, reporting and permitting of all aspects of the project's landscaping. This designer takes the conceptual plan and prepares full landscape designs. This design may include a variety of turf, shrubs, trees and grasses. These designs may include commercial or residential landscaping, agricultural plantings, public landscaping or sports fields. This designer will provide the design for the project by modifying the plans, details and reports. The designer will also coordinate the landscape design with the governing authorities including filing all required forms and spreadsheets and speaking with government staff. The LD will be required to obtain their Landscape Architecture licence in Tennessee within six months. The LD will be responsible for staying up to date with all of the landscaping laws and regulations, relevant technology and upcoming changes for the City of Chattanooga, Hamilton County, Tennessee, the City ...
Category: Architecture       
Skills: Architecture, AutoCAD       

c****eng
 [?]
Sign in to view client's details.
| c****eng
|    United States
Fixed Price: Less than $500   |  Posted: Jun 24, 2015  |  Ends: 2d, 12h  |   4 Proposals
We are looking for experienced optical engineer who can contribute to our team by assisting in selection of available OEM designs or creating custom optics for our many projects involving cameras and IR cameras.
Category: Other - Engineering &...       

r****ept
 [?]
Sign in to view client's details.
| r****ept
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: Jun 24, 2015  |  Ends: 2d, 11h  |   23 Proposals
Need: An initial concept land planning layout for a 40- acre, single family residential subdivision located in the City of Campbell, Texas. The development program will consists of generally 120 single family homes on approximately quarter acre lots. The overall development will need to be broken up into three phases. Based on a net of 30-acres, each phase would include approximately 40 individual lots. The development will also include a small community recreation center and pool. The overall property is a generally flat, rectangular shaped land parcel set within an overall 133 acres of open land. The northern most 40-acres are the land that is being proposed for the subdivision. The property is located east of Greenville on Highway 30 and along CR 513. There would be approximately 907 feet of road frontage along CR 513 with two proposed entrances for access into the subdivision. Along the interior roadways, no curb & gutter is anticipated, instead bar ditches are planned. In ...
Category: Civil & Structural       

s****ina
 [?]
Sign in to view client's details.
| s****ina
|    United States
Fixed Price: $500 - $1,000   |  Posted: Jun 24, 2015  |  Ends: 2d, 11h  |   18 Proposals
Many disposable, plastic flow sensors exist for human patients. We would like to create a large bore flow sensor for large animals that is similar to existing human patient flow sensors. The idea is to modify an existing design to make it larger (human is 15mm, animal should be 30-50mm) and maintain reasonable accuracy. Draw up the design in CAD and 3D print a prototype version for test and evaluation. 3D modeling is possible and beneficial, but not required if a more "try and evaluate" approach is taken. Depending on the prototype success, follow on work will be available.
Category: Mechanical       

n****ano
 [?]
Sign in to view client's details.
| n****ano
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 24, 2015  |  Ends: 2d, 6h  |   18 Proposals
We are currently working on a PCB with a 3G module, ARM processor, DC/DC and some other parts. From time to time the 3G module or uC stop responding - the 3G module usually burns up and some of the pins of the uC burn as well. Although we have a great engineer working on the project, we'd like to have a fresh look from an experienced engineer that may think of something we've missed. We will of course give more information, the schematics are in Altium.
Category: Electrical       
Skills: Altium Designer, Electrical Engineering       

y****ivb
 [?]
Sign in to view client's details.
| y****ivb
|    Israel
Fixed Price: $65 or less   |  Posted: Jun 24, 2015  |  Ends: 2d, 2h  |   9 Proposals
Need a knifeline designed for a Gravity Chute Style hangsell created from E-Flute corrugated cardboard. Hangsell will hold tablet products. Rough sketches supplied.
Category: CAD       
Skills: 3D Modeling, AutoCAD, Manufacturing Design       

P****ory
 [?]
Sign in to view client's details.
| P****ory
|    Australia
Fixed Price: Not Sure   |  Posted: Jun 24, 2015  |  Ends: 2d, 2h  |   3 Proposals
I'm look for someone who can make these shelves for my shoe store and the front layout of the counter space but with just 1 cash register and the rest a glass display case.
Category: Product Design       
Preferred Location: United States

t****nes
 [?]
Sign in to view client's details.
| t****nes
|    United States
Fixed Price: Not Sure   |  Posted: Jun 24, 2015  |  Ends: 2d, 2h  |   23 Proposals
Draw CAD house plan to New Zealand standards . floor plan attached and have some more elevation concepts available. will want suggestions for the image.
Category: Architecture       

c****ler
 [?]
Sign in to view client's details.
| c****ler
|    New Zealand
Fixed Price: Less than $500   |  Posted: Jun 23, 2015  |  Ends: 1d, 12h  |   32 Proposals
Need a rendering of an existing church that will be converted into a 10 unit apartment complex. Needs to fit within the design of the city. This will be used for just idea conception. We are a development firm looking build a relationship with one Architect to work with, for future jobs.
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

d****her
 [?]
Sign in to view client's details.
| d****her
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job