Save this Search
     
Sort by:
  • Posted Date
Fixed Price: Less than $500   |  Posted: 17 minutes ago  |  Ends: 1d, 23h  |   0 Proposals
I am buying a two bedroom flat which I plan to redevelop into a three bedroom flat, and I need scale floor plans. I would like: 1) the existing floor plan to be put into Autocad and altered to correct inaccuracies (e.g. the kitchen window is in the wrong place, the chimney breast in the bedroom/bathroom is not correctly shown, and chimney breast in the reception room is also not drawn correctly). 2) a new scale floor plan to be drawn up based on the proposed floorplan. For the purposes of splitting the bathroom, please assume the stud wall is 13cm thick. 3) a floorspace calculation. I attach: a) the exsiting floorplan based on the estate agents' particulars b) the proposed floorplan - please let me know if this is not clear c) the doors & windows calculations; the key numbers here are the distance to the left and right of the windows. Windows are numbered on the floor plan measurements picture d) floor plan measurements. This may not be terribly clear; let me know if it is ...
Category: Architecture       
Skills: Architecture       

f****001
 [?]
Sign in to view client's details.
| f****001
|    United States
Fixed Price: Less than $500   |  Posted: 1h, 39m ago  |  Ends: 6d, 21h  |   10 Proposals
We would like to re-design the front entrance area of our house. We have pictures and some rough measurements and some ideas. We need someone to help us with design renderings and drawings of what you may propose and ultimately a set of drawings that we can build from. Currently, the front of the house is hidden from view from the sidewalk by a brick wall. Behind the wall is a raised area of dirt and plants. We would like to get rid of ALL the dirt, flatten out the front and make it a patio. We also would like to remove the brick wall and replace it with a fence so the house can be seen better from the street. We would like the patio to be level with the Double Doors. We would need to have a retaining wall at least up to the level of the sidewalk - which is approximately 3 feet above the bottom of the double doors. The tree in front of the front door needs to stay there - which may mean it needs to be boxed in. Everything else can go. I attach several pictures of the house as ...
Category: Architecture       

m****ung
 [?]
Sign in to view client's details.
| m****ung
|    United States
Fixed Price: Less than $500   |  Posted: 6h, 51m ago  |  Ends: 2d, 17h  |   4 Proposals
We have a shoe store and we are looking at updating the look of the store. We would like to have as many shoe boxes in the store as possible - so that customers can help themselves. Attached is a concept store however we feel that it looks too much like a factory store. We need something that says high fashion. We just need a concept presented in an image. We do not require exact sizing, or architectural plans as we still are not certain what the size of the store will be.
Category: Interior Design       
Skills: 3ds Max, Architecture, Interior Design       

d****gee
 [?]
Sign in to view client's details.
| d****gee
|    South Africa
Fixed Price: Less than $500   |  Posted: 7h, 29m ago  |  Ends: 16h, 30m  |   10 Proposals
I need a 3D rendering of a residential backyard, including raised spa with fountain, patio covers, barbecue, pizza oven, two fireplaces, and plants and trees. I will provide Autocad drawing and photos of existing house and yard. Yard is approximately 2000 square feet (185 square meters). Italian style architecture. I would like to have 3 perspective views rendered (.jpg), or a fly-through movie (.mov). I am ready to order today, please let me know how quickly you can complete project. Thank you.
Category: Architecture       
Skills: Landscape Design, 3D Modeling, Architecture       

d****til
 [?]
Sign in to view client's details.
| d****til
|    United States
Fixed Price: Less than $500   |  Posted: 9h, 58m ago  |  Ends: 1d, 14h  |   1 Proposal
Hello, I have an OrCAD file that I need converted to Altium. I have a legal copy of Altium here, but apparently the OrCAD file is too new for the import wizard to recognize. I need it converted or even just opened and saved in an OrCAD format that is 16.2 or older. I am hoping to get this done tonight so I can get back to work in the morning. Thank you
Category: CAD       
Skills: Altium Designer, OrCAD       

r****ics
 [?]
Sign in to view client's details.
| r****ics
|    United States
Hourly Rate: $20 - $30 / hr   |  Duration: 3-4 weeks  |  Posted: 10h, 17m ago  |  Ends: 13h, 42m  |   12 Proposals
This is a repost. Please reply again if you're interested. We are in need of a 3D designer who can also 3D print alpha prototypes. We are a small technology start-up designing for the enormous energy industry. The work must be kept strictly confidential. Deliverables we need will be specifications documented, 3D model design, 3D printing of alpha and beta prototypes. This job will be ongoing as we design, print prototype, field test, redesign for improvements and finally working to production ready prototype. We need three distinct prototypes designed and printed. 1. a simple cylinder (several sizes) Max diameter 3", max height 5" 2. an air-tight, donut-like shape, that can open/close. Max diameter 7" 3. A mounting 'bracket' to attach technology to end of cylindrical tube. Max diameter 5", max height 5" ( estimated ) I look forward to your response! Thank you.
Category: 3D Modelling       
Skills: 3D, 3D Printing       
Preferred Location: North America

j****ton
 [?]
Sign in to view client's details.
| j****ton
|    United States
Fixed Price: Less than $500   |  Posted: 15h, 16m ago  |  Ends: 6d, 7h  |   1 Proposal
I like to have a European company that can do this for us, not an asian. We need it in one week from now. We need more then one pcs but firs we need to be don with this project. We need skilled peoples that know how to operate cnc machines. We have a fixed price of $250-$350 for this job. We need a floor display made in a cnc machine with carved logos and painted sent to Norway. We need it to be made of MDF/HDF and it need to be painted in gloss paint for furniture with our special colors. Also it need to be black colored glass shelfs under the beverage cooler as you see on the attached drawings. It need to be made well as it need to hold on to the beverage cooler inside + the beverage cans 30kg. Also i like to have the cabinet in one flat pice in the front so that it is not some that points out, se file for design. Add all our logo design on the floor display. The paint to use is : Pantone Pastels Neons Coated 801 C all blue color in glossy furniture paint. Pantone ...
Category: CAD       

l****zkh
 [?]
Sign in to view client's details.
| l****zkh
|    Norway
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 17h, 21m ago  |  Ends: 6d, 5h  |   3 Proposals
Looking for a creative futuristic mind to create a 3D concept model of a strength scale- it will measure the strength of the world's strongest man and maybe a few superheros. In fact, I was thinking of it having sort of a batman feel ] I admire your work, hopefully we can work together. Notably, my project deadline is March 21st. Please send me a reply of your fee schedule at your earliest opportunity ready to work. This is my first time using elance. I hope that you are available to assist in the execution of this cutting edge invention.
Category: Product Design       
Skills: 3D Design       

A****sir
 [?]
Sign in to view client's details.
| A****sir
|    United States
Hourly Rate: About $15 / hr   |  Duration: 1-2 weeks  |  Posted: 18h, 20m ago  |  Ends: 5h, 39m  |   17 Proposals
I have complete drawings and BOM for a training/athletic device I am developing. . My current concept also requires welding and machining in addition. I am looking to reverse-engineer this concept into a simpler version with more standard parts and to reduce welding and machining wherever possible. I would even like to consider aluminum or some other material. My goal is to find a solution which falls under $80 range (90% reduction) even for the prototype so that I can reasonably test and potentially produce in larger quantities later.
Category: Product Design       

W****gns
 [?]
Sign in to view client's details.
| W****gns
|    United States
Fixed Price: Not Sure   |  Posted: Mar 04, 2015  |  Ends: 1d, 23h  |   8 Proposals
I would like a quote for preparing a material list takeoff for supply bidding. I need a materials for framing, drywall, suspended ceiling, electrical and plumbing. I have architect drawing sample. I have attached a sample floor plan for your viewing. I have full set of architect and mep drawings. Please be located in the USA and have knowledge of code requirements to better understand what materials are required. Must be accurate.
Category: CAD       
Skills: 3D Modeling, Architecture, AutoCAD       
Preferred Location: North America

e****166
 [?]
Sign in to view client's details.
| e****166
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 02, 2015  |  Ends: 18h, 57m  |   5 Proposals
I am developing a product and need a discussion with an EE to discuss an MP3 type device. Depending on the discussion I may need an EE to develop the 3D drawing of circuitry and help develop the prototype and cost out production. I would think the initial call would be an less than an hour, but I will pay an hourly fee. Great way to make a quick buck and get a good review.
Category: Electrical       
Preferred Location: North America

L****oup
 [?]
Sign in to view client's details.
| L****oup
|    United States
Fixed Price: Not Sure   |  Posted: Mar 02, 2015  |  Ends: 4d, 5h  |   4 Proposals
We are looking for a relationship of us to a company or factory that can make detailed scale models. Consider for example, planes and cars from the period last century and then relates specifically 1900 to 1955.
Category: Other - Engineering &...       

F****S59
 [?]
Sign in to view client's details.
| F****S59
|    Netherlands
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 01, 2015  |  Ends: 3d, 14h  |   1 Proposal
Hello, I am a cosmetic product developer launching my own line of products. I will start with a set of color products for which I need assistance developing. Working with various skincare contract labs in my career, I am totally familiar with the the product development cycle. I work a full-time job, so what I am looking for is a chemist to do the initial development work, build formulas and create prototypes for my launch in June. At that point, if you have the capabilities to produce a small quantity of samples, we can work together on that. If not, I may take the formulas to a contract lab with a low minimum order. YOU MUST BE ADEPT WITH COLOR DEVELOPMENT. You are: -reliable -experienced in color chemistry -Familiar with the color product market Although my budget is limited in this phase of the project, we can discuss a price and timeline that works for both of us.
Category: Product Design       

a****uve
 [?]
Sign in to view client's details.
| a****uve
|    United States
Fixed Price: $100 - $200   |  Posted: Feb 27, 2015  |  Ends: 1d, 17h  |   11 Proposals
We decided to redesign the dining room and washrooms. To remove the play area To Include the bar in reception are No need to have booths Redesign the room with new layout We require 3d render and new layout sketch. The interior of design needs change to effectively use material form following suppliers. The project must list material used in design with item code, item name, colors etc and supplier name.   [obscured]   (For walls, tabletops and reception, Screens)   [obscured]   (for ceiling)   [obscured]  /gallery.html (Walls and screens) Lighting:   [obscured]   (Lighting)   [obscured]  /   [obscured]  /   [obscured]  -ledlighting.com.au/   [obscured]   FLOORING:   [obscured]  /en-au/commercial-flooring (Stone) Chairs :   [obscured]  ,   [obscured]  / TVS : 40 inch Other assets ideas:   [obscured]  / (w...
Category: Interior Design       
Skills: 3D Modeling, Interior Design, SketchUp Pro       

D****ang
 [?]
Sign in to view client's details.
| D****ang
|    Australia
Fixed Price: Not Sure   |  Posted: Feb 27, 2015  |  Ends: 1d, 8h  |   16 Proposals
We are looking for a freelancer who can assist with a wide range of projects in 2015 ranging from assistance with sourcing parts, to supplier developing and assisting with finding engineers who are able to reverse engineer samples we send and prepare technical drawings.
Category: Other - Engineering &...       
Preferred Location: China

s****ley
 [?]
Sign in to view client's details.
| s****ley
|    United Kingdom
Fixed Price: Not Sure   |  Posted: Feb 27, 2015  |  Ends: 1d, 5h  |   20 Proposals
Have 3 key injection molded plastic parts that work together as a (patented) system. Material is 30% glass filled nylon. It is an outdoor application and need to model stress/failure under wind force loads. Have step files for key parts. Looking to have FEA done and improvements suggested based on results. There is a 5/8" fiberglass rod that attaches to the bracket and holds a banner and the wind force is applied to that rod. Videos of the system in action are available to help understand.
Category: Mechanical       
Preferred Location: North America

c****ers
 [?]
Sign in to view client's details.
| c****ers
|    United States
Fixed Price: $500 - $1,000   |  Posted: Feb 26, 2015  |  Ends: 10h, 12m  |   12 Proposals
We need a freight friendly packaging design for our product. The products (four of them) are large, in rough terms 50" x 20" x 20' and weighs 50lbs.We are seeking one solution for the four very similar styled procucts. The product is mostly wrought Iron, but easily bent. There are several accessories that need to be packed with the main product one of which are two glass plates. We do not want to use Polystyrene if possible, not for 'eco' reasons but more about cost. We need to be able to stabilise it for a journey from Europe to the USA by sea, then by truck to parts of the USA. If you have experience in developing simple effective solutions for large scale packaging like this, show us what you have done in this area and tell us how much to make the perfect solution for us. We will happily share more information including full CAD drawings and detail with people who we shortlist for this job.
Category: Product Design       

B****cca
 [?]
Sign in to view client's details.
| B****cca
|    New Zealand
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Feb 25, 2015  |  Ends: 1d, 16h  |   10 Proposals
I require a preliminary drawing of a 16 metre motor catamaran hulls and bridgedeck. Candidate must have access to and experience with, boat building software. I have the drawings of a sailing catamaran of similar size but require a very simple study plan of a POWER catamaran, mainly the underwater shape. It will be strictly a FLAT PANEL construction using cad cut 16 mm fibreglass composite panels, cut from a basic production panel measuring 16 metres X 3 metres. The attached drawing is an EXAMPLE ONLY. The required drawings will differ.
Category: CAD       
Skills: Drawing, Drafting       

d****ton
 [?]
Sign in to view client's details.
| d****ton
|    Australia
Hourly Rate: $15 - $20 / hr   |  Duration: 1-3 months  |  Posted: Feb 25, 2015  |  Ends: 6d, 21h  |   3 Proposals
Currently looking for someone to find Private Label hair product samples for a hair wax. We need WORLDWIDE SHIPPING, and HIGH QUALITY. If you can help solve these two problems, we are looking forward to working with you. High quality in China, Japan, Korea or maybe the US are all options. If you have something else in mind feel free to bring it to the table.
Category: Contract Manufacturing       
Skills: Industrial Design, Manufacturing Design       

B****ers
 [?]
Sign in to view client's details.
| B****ers
|    Canada
Fixed Price: Less than $500   |  Posted: Feb 25, 2015  |  Ends: 6d, 21h  |   3 Proposals
I'm looking for a chemist to help me create a special blend of "rubber". - it must be slowly soluble in water at 10-30 degrees Celsius - breaking point must be above 250% elongation - must be elastic and retain it's original molding shape after (a less than 250%) elongation - must accept coloring and flavoring at molding time - could be based on agar agar and arabic gum
Category: Chemical Engineering       
Skills: Chemistry, food chemistry       

o****seo
 [?]
Sign in to view client's details.
| o****seo
|    Thailand
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Feb 24, 2015  |  Ends: 6d, 19h  |   11 Proposals
Looking for a LICENSED Architect /Interior Designer to convert my one bedroom apartment to a two bedroom apartment. Must have experience with apartment living designs, think Apartmenttherapy.com. Need to see portfolio pieces of urban interior apartment design. Style should be modern.
Category: CAD       
Skills: 3D, AutoCAD, 3D Design, 3D Rendering       
Preferred Location: United States

G****a20
 [?]
Sign in to view client's details.
| G****a20
|    United States
Hourly Rate: $15 - $20 / hr   |  Duration: 3-4 weeks  |  Posted: Feb 24, 2015  |  Ends: 6d, 18h  |   14 Proposals
Perform flooring and tile takeoffs using OST software. Building construction files will be forwarded to freelancer electronically. The quantity takeoff will be performed in OST. The OST electronic file will be forwarded to the employer.
Category: Other - Engineering &...       
Skills: Onscreen Takeoff software       

L****-Wa
 [?]
Sign in to view client's details.
| L****-Wa
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: 3-4 weeks  |  Posted: Feb 24, 2015  |  Ends: 6d, 17h  |   11 Proposals
Perform quantity takeoffs for flooring, wall and floor tile materials in commercial buildings using OST. Building drawing files will be forwarded to freelancer. Freelancer to perform quantity takeoff and then forward OST electronic files back to employer.
Category: Other - Engineering &...       

L****-Wa
 [?]
Sign in to view client's details.
| L****-Wa
|    United States
Fixed Price: Less than $500   |  Posted: Feb 24, 2015  |  Ends: 6d, 17h  |   9 Proposals
Looking for a 3D modeler to provide rendering and animation for a technical application to be given in a presentation. This will be a conceptual animation to show flow and steps, and not require precise CAD modeling. Will provide some sketches before assigning job and agreeing on price. Sketches will be provided for animation aspects needed, and pictures of actual physical components are available. Budget will be <$200 Job Description: The system being modeled is fairly simple and consists of a fluid that moves in a loop. A portion of the fluid must change colors when moving between parts of the system. Technical or engineering background preferred, with history of CAD and 3D modeling. Animation will be presented in power point format, as well as print stills. Would prefer to have results in a movie format with high quality stills available.
Category: 3D Modelling       
Skills: Animation, 3d Animation, 3D Rendering       

n****onx
 [?]
Sign in to view client's details.
| n****onx
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job