Save this Search
     
Sort by:
  • Posted Date
Posted: Within 7 days
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: 34 minutes ago  |  Ends: 14d, 23h  |   1 Proposal
Good day Toshe I hope you are well. I have conceived of a product relating to women's shoes. I believe that although it is a women's shoe product that the realities and skills of construction will be best suited to developing this product. The elements are: a) Front view of the product b) Back and bottom view of the product I need your help mainly on b, but look forward to discussing ideas with you around a) as well. I have contacted a company in China who requires 3D images of the product and as I know very little about product development and what "good" should look like, so would require your help in educating me and giving me the very best options around the shoe accessory. Please let me know ASAP if you would be interested in this project? Kind regards Sidonia Michoux Tooshoos Ltd UK
Category: 3D Modelling       
Skills: 3D       

T****oos
 [?]
Sign in to view client's details.
| T****oos
|    United Kingdom
Fixed Price: Not Sure   |  Posted: 2h, 51m ago  |  Ends: 14d, 21h  |   14 Proposals
We want to find freelancer for our company to design our products. We need about 10 new models of our "door handles" in different styles. So this job will be for long-term. The basic idea is to make design from 3D drawing to have picture close to real and have enough drawing to make tooling if necessary. Details could be discussed later.
Category: Product Design       
Skills: 3D Modeling, Manufacturing Design       

m****rew
 [?]
Sign in to view client's details.
| m****rew
|    China
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 6h, 54m ago  |  Ends: 14d, 17h  |   4 Proposals
This job is to design and lay out a pcb that will verify thermal performance of a design in progress. The pcb shape and chip locations of the current design are attached in a DXF. Your job is to place resistors in the locations of the chips so that the power draw is approximately correct. Please confirm your design package can open the DXF before bidding. This will be a 2 layer board. The load resistors will go on top with vias under them. There will be copper pours on the back. Chips 2, 6, 6b and 9 should all have pours between 1 and 1.5 square inches. Other pours should be 2 times the length and 2 times the width of the chip. Do not coat these thermal pours with soldermask. You can choose 1 board voltage (either 24V, 12V, or 5V). Power and ground will enter through pads on the edge of the pcb. Please include vias in these pads. Use resistors from Digikey that are in stock. Resistor loads should be within 10% of the values listed below. The units of the DXF are mils. There are some ...
Category: Electrical       

d****ius
 [?]
Sign in to view client's details.
| d****ius
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 7h, 3m ago  |  Ends: 6d, 16h  |   1 Proposal
My name is Amil and I am the founder and sole employee of Alterist Nutrients. Alterist is a vitamin and supplement brand targeting anyone interested in weight lifting and physical training. Our first range of products will be ready for sale in June and will consist of 4 supplements to aid in muscle gain, strength improvement and fat reduction. The products are currently being made in Australia by a contract manufacturer. I am in need of an advisor to help me set up the business so I can expand manufacturing overseas, specifically China, and export to North America and Europe. I would like your advice and services to get the shipping and logistics ready so I can start selling my products through my website.
Category: Other - Engineering &...       
Skills: Manufacturing, Logistics & Shipping       
Preferred Location: Australia/Oceania

a****car
 [?]
Sign in to view client's details.
| a****car
|    Mexico
Fixed Price: Not Sure   |  Posted: 7h, 46m ago  |  Ends: 14d, 16h  |   7 Proposals
Hi we are in need of some one or a team of people to help build and design an amplifier. the project id to build a Bluetooth/ Wi-Fi speaker system. if you are interested in tacking on this job or have skills to suite this job please ask for more details thank you
Category: Electrical       

s****als
 [?]
Sign in to view client's details.
| s****als
|    Australia
Hourly Rate: Not Sure   |  Duration: 3-4 weeks  |  Posted: 10h, 3m ago  |  Ends: 14d, 13h  |   2 Proposals
CNC Manufacture 3 prototypes using step files and pdf files that will be provided. Materials are Stainless 440, S60V and G10. Prototypes must be made in the USA and NDA will be required.
Category: Contract Manufacturing       
Preferred Location: United States

m****mgp
 [?]
Sign in to view client's details.
| m****mgp
|    United States
Fixed Price: $500 - $1,000   |  Posted: 10h, 20m ago  |  Ends: 14d, 13h  |   2 Proposals
Modeling and simulation for a large data set. Expert knowledge of aerospace engineering and concepts.
Category: Other - Engineering &...       
Skills: Electronics, MATLAB, aerospace, simulation       

m****nja
 [?]
Sign in to view client's details.
| m****nja
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 10h, 29m ago  |  Ends: 2d, 13h  |   9 Proposals
Hello, I need a proof of concept program developed on an Atmel xMega chip with TFT touch screen. The POC will read an input string and continually scroll the contents across the display in a structured format as explained below. In addition, there are some simple touch screen actions required. See attachment for requirements with images. Requirements: Initiate #9 logo on startup, display for 5 seconds Switch to main screen, which contains rotating display of text based messages The main screen contains three callout bubbles, with related message content and image Example screen: Screen needs to scroll content every 5 seconds, with top message being removed and replaced by middle message, middle message replaced by bottom message, and bottom message being replaced by a new message. Every 5 seconds, a new message is added and an older one is dropped off. For example, after 5 seconds, the example screen from above will now look like ? The screen will need to continu...
Category: Electrical       
Skills: Integrated Circuits, PCB Design, C++, Atmel AVR       

w****zak
 [?]
Sign in to view client's details.
| w****zak
|    United States
Fixed Price: Less than $500   |  Posted: 10h, 48m ago  |  Ends: 14d, 13h  |   0 Proposals
Looking for chemist that can engineer a 2 part High Solids Epoxy for garage floors. I will need to know what I need to manufacturing with instruction, mix ratios, how to tint for color, what is need to tint. How to locate raw material. I will need to know how to make a 2 part Clear Epoxy + Polyurethane Top Coats.
Category: Chemical Engineering       
Skills: Manufacturing       

P****ock
 [?]
Sign in to view client's details.
| P****ock
|    United States
Fixed Price: Not Sure   |  Posted: 11h, 44m ago  |  Ends: 14d, 12h  |   4 Proposals
Hi, We're looking for a sourcing agent who can find us *at least* 3 EPA regulated factories (Ideally, we want 5+) Plus, the factories should produce pest repellent devices that can be used indoor to repel pests.. If you can do this relatively small job, the pay will be one-time and it will be a few hundred bucks (depending on how well you do the work) You have to provide us the: #1 - Contact info/address of the factory in China and/or Taiwan. (Email/skype/address etc) #2 - Their EPA regulation certificate so we know (factually) that they have an EPA regulation. #3 - At least 3 different factories (ideally 5 or more. The more the better pay!) Thanks, - Ishan
Category: Other - Engineering &...       
Preferred Location: India/Southern Asia, Eastern Asia, Middle East & Central Asia

i****oni
 [?]
Sign in to view client's details.
| i****oni *
|    Canada
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: 11h, 51m ago  |  Ends: 14d, 12h  |   5 Proposals
Hard cover luggage that includes a number of features for todays traveler A lot of smart features, Most of these exist in other projects but not all of them together in the same project Its a combination of the best features of the items shown below The lluggage should contain 1) wheel dynamo and charging unit for mobile 2) find me feature 3)digital scale 4) Pumb to reduce space 5) converted in table, bench 6) converted in a layboy extension (ie have a soft coveron one side) so people can rest while waiting in airports 7) bluetooth lock The project will go on crowdfunding to be produced The most features are shown below So I need people who have experience on designing luggages I need people who have experience of similar consumer products. Will need help also on Prototyping. If you do have experience and are willing to work on a challenging project contact me. The most features are shown below   [obscured]  /projects/trunkster/trunkster-zipperless-luggage-with-gps...
Category: Product Design       

s****top
 [?]
Sign in to view client's details.
| s****top
|    Greece
Fixed Price: $1,000 - $5,000   |  Posted: 11h, 56m ago  |  Ends: 14d, 12h  |   17 Proposals
Hi, We are looking for a realistic 3D design in full colour of a new style LED trailer we intend on building. We have most of the basic drawings and features. We are looking for something like   [obscured]   We can provide you with most of the components of already built trailers but there are some you would need to design from scratch. Overall scope is: - Can provide an inspiration folder with images of current trailers built to date and also some others we like to include the features of - Setup draft outline version of the base of trailer - Setup to include custom wheels and custom guards - Make revisions on base trailer - Base trailer must have retractable draw bar, 2 front 45 degree stabiliser legs and 2 rear 90 degree stabiliser legs - From here I would like custom guards, dual axil, checker-plate (diamond plate) top with laser cut customer logo. - There is hydraulic mast and pump that needs to be included - There is main central control station like 19RU rack mounte...
Category: 3D Modelling       
Skills: 3D, 3D Modeling       

o****lia
 [?]
Sign in to view client's details.
| o****lia
|    Australia
Fixed Price: Less than $500   |  Posted: 13h, 47m ago  |  Ends: 1d, 10h  |   20 Proposals
We'd like an interior designer or architect input for the front of our home. We're converting a car park (at the front of the house) into a garage, the result is that the garage will take 60/70% of the facade. We want to reinforce the presence of the house, avoiding that the garage is the only thing that you see from the street.... This job doesn't require technical drawings or exact measurements. We're after a creative idea to complete the finishing of the front of our house. We'd be happy even with a basic hand-drawn sketch. We'll send you images of the house, an idea of the colour scheme we were planning to use and some basic measurements.
Category: Interior Design       
Skills: Architecture, Interior Design, SketchUp Pro       

d****nte
 [?]
Sign in to view client's details.
| d****nte
|    Australia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 14h, 16m ago  |  Ends: 14d, 9h  |   10 Proposals
I am looking for someone to assist us with undertaking hydraulic take off & preparation of bill of quantities for our in house estimator to finalise his quoting process.
Category: Other - Engineering &...       

G****HP1
 [?]
Sign in to view client's details.
| G****HP1
|    Australia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 15h, 11m ago  |  Ends: 14d, 8h  |   4 Proposals
I'm looking to hire a freelance ArtiosCAD expert / structural designer to create corrugated box dielines on an ongoing basis. The job will include modifying the "cover flaps and ears" Standard box style in B and E flutes according to different dimension (LxWxD) specs. You will also be nesting the boxes on sheets in order to optimize material usage. Candidate must have ArtiosCAD software installed.
Category: CAD       
Skills: ArtiosCAD, Packaging Design       

s****ies
 [?]
Sign in to view client's details.
| s****ies
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 15h, 20m ago  |  Ends: 14d, 8h  |   1 Proposal
Hello, I own a composting company in Guatemala and am looking to incorporate chickens into our operations. Specifically, I am looking to source feedstock (the stuff that goes into the compost) that coincides with the chicken's nutritional needs. The idea is simple - build a compost pile with food scraps that creates the right thermophilic conditions for composting while also satisfying the dietary needs of laying hens. The Job: 1.) Figure out the dietary needs of laying hens (i.e. 20% protein, 3% calcium, etc) 2.) Figure out the right combination of these required food scraps in terms of their nutrient content as it relates to the dietary needs of laying hens. 3.) Determine the carbon to nitrogen ratio, density, and moisture content of these food scraps. End Product: - Excel spreadsheet that indicates the volume, weight, nutritional composition, carbon to nitrogen ratio, density, and moisture content of an ideal food scrap combination per chicken per day. The goal is to recycl...
Category: Other - Engineering &...       

l****m01
 [?]
Sign in to view client's details.
| l****m01
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 16h, 25m ago  |  Ends: 14d, 7h  |   24 Proposals
I've bought a flat which I would like to reconfigure to have two bedrooms and two bathrooms, and am looking for ideas about how to do it. To take into consideration: - there are two soil pipes which could be used which lie just to the left of the kitchen and bathroom windows respectively. - the 3.1 x 3.1m bedroom, to the left of the front door, has the best view and so might be a good sitting room. - the corridor has to stay because there has to be a protected fire exit from all the rooms. - there are two structural walls. One is between the 3.1 x 3.1m bedroom and the bathroom; this could be taken out at a price, or a door with a concrete lintel could be made in it fairly easily. The other is between the 2.5 x 3.2m bedroom and the sitting room - this can't be altered. - I'd like as much storage space as possible. Ideally both bedrooms will have fitted cupboards, and a coat cupboard in the hall would be a bonus. - both bedrooms need to fit double beds. - I'm looking for one...
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

f****001
 [?]
Sign in to view client's details.
| f****001
|    United States
Fixed Price: Less than $500   |  Posted: 17h, 57m ago  |  Ends: 6d, 6h  |   10 Proposals
I have the details for my product finalized and need a 3D model and resources for manufacturers to take it to production. I am looking to hire someone who can work independently, understand the purpose of the product, and troubleshoot problems and respond to them head on. Looking for a great communicator who knows when and how to ask questions, this is a big one. We are working together. I will help with anything that is presented to me in the correct manner. Communication is key for my projects. I want to work with someone who doesn't want to be micromanaged. We can set up a time to "discuss" the product entirely. I can present my idea and what I need from you. You take it from the idea, into an engineered final 3D model that I can take to any manufacturer and say "This is my product and I would like it to know how much it would cost." ---------------- If you can handle working on a product, signing a disclosure agreement, and working quickly; please send me E...
Category: Product Design       

b****ies
 [?]
Sign in to view client's details.
| b****ies
|    United States
Fixed Price: Less than $500   |  Posted: 18h, 31m ago  |  Ends: 14d, 5h  |   4 Proposals
I need someone to assist me with this program ANSYS CFX i am trying to build a program with this and finding it difficult to do. drag force against time coefficient of drag against time Drag force cannot be calculated because it is an "unknown variable" do i need to run the program again? I NEED someone to come onto skype with me for about an hour
Category: Mechanical       
Skills: ANSYS       

c****dto
 [?]
Sign in to view client's details.
| c****dto
|    United Kingdom
Fixed Price: Less than $500   |  Posted: 18h, 41m ago  |  Ends: 14d, 5h  |   4 Proposals
Our video game is set in space, taking place after the Earth has exploded. The trailer features a man in a spacesuit, carrying a briefcase, walking down a dark, scary hallway with flickering lights. After about 6-8 seconds, he arrives at a large, steel door, has a hard time opening it, and finally gets outside to see giant ice mountains (on the planet of Pluto). We cut to a scene of the Earth suspended in stillness and it's collided by a 1000-mile wide asteroid, engulfing the Earth in fire and ultimately destroying it. We then see quick clips of things like laboratories floating on Venus, ships flying past Saturn, a man flying a spaceship in third person view, etc. The total length of the score should be 45 seconds.
Category: Other - Engineering &...       

E****TFL
 [?]
Sign in to view client's details.
| E****TFL
|    United States
Fixed Price: $20 - $75   |  Posted: 18h, 55m ago  |  Ends: 6d, 5h  |   2 Proposals
I am looking for a complete design of a mobile Espresso Bar. After your design the carpenter will build the final product. WORK - PRODUCT A Mobile Espresso Bar (see attached pictures) Basis of the mobile espresso bar should be 1. a 1260x790mm kitchen island and needs to be adapted to it needs (for example an ikea stenstorp kitchen island). OR 2. Draw an own model This semifinished product has to be finished to a Mobile Espresso Bar. It should provide space for: Above Countertop :: Coffee Mashine (600x600x700mm (Width/Depth/Height)) :: Grinder :: Countertop Lid, straw and Condiment Organizers :: All kind of holes for supply (electric, water, waste etc) :: Refridgerator for cold drinks and/or take away cake/sandwiches smoothies :: a space where a customer can prepare his coffee, example to finish with sugar, stir and put a top on the cup. :: A space where the customer can drink the coffee. Can be made with one of the sideparts (see closing) :: any input or ideas will be great Belo...
Category: CAD       
Skills: 3D, 3D Modeling, AutoCAD, Manufacturing Design       

w****nfo
 [?]
Sign in to view client's details.
| w****nfo
|    Austria
Fixed Price: Less than $500   |  Posted: 21h, 36m ago  |  Ends: 6d, 2h  |   36 Proposals
We need to modify electronic enclosure design. The enclosure is composed of two parts, front and back with hinge connecting them. We need to modify the dimensions as well the details inside and the hinge. We do have the original solidworks files if needed.
Category: Product Design       
Skills: AutoCAD, SolidWorks       

m****das
 [?]
Sign in to view client's details.
| m****das
|    Canada
Fixed Price: Less than $500   |  Posted: Apr 26, 2015  |  Ends: 13d, 23h  |   19 Proposals
I need some minor change to prior renderings and design images. There are 2 images of overhead shots and one set of drawings with 2 aspects (overhead and side view) that need some changes.
Category: CAD       
Skills: 3D Modeling, AutoCAD, CAD/AutoCAD       

J****win
 [?]
Sign in to view client's details.
| J****win
|    United States
Fixed Price: $850 - $1,500   |  Posted: Apr 26, 2015  |  Ends: 13d, 23h  |   21 Proposals
The job is to enhance the design of a research Institute for the study of pulmonary and respiratory diseases. $1500 Regards P
Category: Architecture       
Skills: 3ds Max, Adobe Photoshop, AutoDesk Revit       

P****ela
 [?]
Sign in to view client's details.
| P****ela
|    United Kingdom
Fixed Price: Not Sure   |  Posted: Apr 26, 2015  |  Ends: 13d, 21h  |   7 Proposals
I have 2 locations, 1 in Champaign IL and 1 in Plainfield IN, approximately 1 acre each ( Champaign lot is little more than 1 acre) . Both locations are excellent corner, commercial lots. Need someone to work on civil engineering and architectural drawings including mechanical drawings and apply for the permissions with the county and state. Ideal person to work on this will be licensed in both Indiana and Illinois.
Category: Civil & Structural       

h****003
 [?]
Sign in to view client's details.
| h****003
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job