Save this Search
     
Sort by:
  • Posted Date
Time Left: Less than 7 days
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 4h, 40m ago  |  Ends: 2d, 19h  |   3 Proposals
I have a Dialer and a IP-PBX that need to send and receive Sip traffic independently from the same Sip Provider. The IP-PBX is currently working, I now need to route the Dialer to a second External Nic on the firewall so we and the Sip Provider can distinguish Sip traffic. External interfaces are eth0(xxx.xxx.xxx.161) and eth2(xxx.xxx.xxx.167. So the default Gateway is eth0 and we need the Dialer to go out eth2(xxx.xxx.xxx.167) and receive Established, Related traffic back from eth2 to the Dialer. Sip Provider is using Port: 5060 and for the second connection they can use 5070 if that will help.
Category: Networking & Security       

C****osh
 [?]
Sign in to view client's details.
| C****osh
|    United States
Hourly Rate: $20 - $30 / hr   |  Duration: 1-2 weeks  |  Posted: May 25, 2015  |  Ends: 4d, 1h  |   3 Proposals
Help needed from someone with experience configuring IDP 3. I have VPN access to my client's Shibboleth system and I will be performing the configuration with assistance from the chosen freelancer via a screenshare. Current status: Linux CentOS 7 IDP 3 installed on Tomcat 8 with SSL LDAP configured but unable to test (I have extensive experience with LDAP) Unsolicited login page loads, but no login page displayed (stale request msg) Final configuration needed: 1 SP (metadata available) LDAP authentication Release several attributes from LDAP back to SP
Category: Networking & Security       
Skills: IDP, SAML, SSO, Shibboleth       
Preferred Location: United States

D****ity
 [?]
Sign in to view client's details.
| D****ity
|    United States
Hourly Rate: $30 - $40 / hr   |  Duration: Not Sure  |  Posted: May 20, 2015  |  Ends: 6d, 17h  |   4 Proposals
Looking for a pci compliance well experienced consultant for helping improve our system security. We would like to find a way to improve our system with out risking our compliance status.
Category: Networking & Security       
Preferred Location: Western Europe

r****del
 [?]
Sign in to view client's details.
| r****del
|    Israel
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 20, 2015  |  Ends: 6d, 14h  |   2 Proposals
Helllo, I am looking for a Specialist in Ubiquiti Hardware. I need someone to design a guest Splash Page for a UAP Pro AP device. louie
Category: Networking & Security       
Skills: ubiquiti       

l****v22
 [?]
Sign in to view client's details.
| l****v22
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 19, 2015  |  Ends: 6d, 3h  |   10 Proposals
Looking for a Linux professional with strong VPN - IPSEC knowledge to setup an authenticated VPN for iPhone users on AWS. We have 100 iPhone users who has to connect to this corporate VPN to access internet. A proxy server need to run behind this VPN for web filter. I am looking for very experienced network engineers, who understands. -VPN - AWS Cloud -VPC -Proxy -iPhone configuration deployment. Please respond with solution.
Category: Networking & Security       
Skills: Amazon Web Services, VPN       

c****hio
 [?]
Sign in to view client's details.
| c****hio
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: 1-2 weeks  |  Posted: May 19, 2015  |  Ends: 5d, 15h  |   6 Proposals
We have set up IPFire Firewalls, running at 3 locations. (1 central, and 2 small branch offices). We require someone with very sound knowledge of IPFire to assist us to create VPNs, and create firewall rules for our organisation.
Category: Networking & Security       

t****sio
 [?]
Sign in to view client's details.
| t****sio *
|    South Africa
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 19, 2015  |  Ends: 5d, 12h  |   39 Proposals
We are a managed service provider looking for remote Level 1/Level 2 support. The ideal candidate will have the ability to interact and troubleshoot desktop issues remotely. You will use our RMM tool to render support. We have a team of Level 3 engineers for escalation and assistance. Clients networks are workgroup and domain and Windows.
Category: Networking & Security       
Skills: Cisco, TCP/IP, Network Administration       

V****zza
 [?]
Sign in to view client's details.
| V****zza
|    United States
Hourly Rate: $30 - $40 / hr   |  Duration: 1-2 weeks  |  Posted: May 18, 2015  |  Ends: 4d, 22h  |   8 Proposals
This professional certification indicates that its possessor has sound knowledge of networks small to medium size or larger networks segments. The CCNA technicians are able to install, set up and operating local area networks (LAN), wide area networks (WAN) and configure computers for Internet Service Providers (ISP) Protocols and communication systems that can handle technical CCNA include IP, IGRP, IPX, Serial, AppleTalk, Frame Relay, IP RIP, VLANs, RIP, Ethernet, Access Lists and others.
Category: Networking & Security       

I****E10
 [?]
Sign in to view client's details.
| I****E10
|    Venezuela
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 18, 2015  |  Ends: 4d, 20h  |   15 Proposals
I have a Cisco SG300-10 and I need to have it setup where port 1-3 are on vlan 10, ports 4-6 are on vlan 20 and ports 7-8 ar eon vlan 30. I need to have the SG300 switch handle the DHCP and then get internet access through our main network through port 10
Category: Networking & Security       

s****nex
 [?]
Sign in to view client's details.
| s****nex
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 15, 2015  |  Ends: 1d, 22h  |   12 Proposals
Hi all. Let me know if this is in your skill set. I have a new site that is ready to go to marketing. My merchant account is set up and I have an SSL EV certificate covering the entire site. I am hosted at go daddy, use wordpress, woo commerce, and Authorize.net. I have done the PCI scan twice and I keep failing two areas. See attached pdf. (I can send the entire report if you want.) Can you help me fix these issues? site: oceanrescuespa.com
Category: Networking & Security       

a****cue
 [?]
Sign in to view client's details.
| a****cue
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 15, 2015  |  Ends: 1d, 19h  |   14 Proposals
We want to have an identical UC540 to the one we have running in our business. We have the devices and need them to be configured (copied) exactly the same and tested. Thanks.
Category: Networking & Security       
Skills: Cisco, Cisco CallManager, Cisco Routers       

D****day
 [?]
Sign in to view client's details.
| D****day *
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: 1-2 weeks  |  Posted: May 14, 2015  |  Ends: 1d, 5h  |   15 Proposals
The goal is to setup a home network with the following setup. Equipment: - Cisco AIR-LAP1262N-A-K9 - Mini Intel Atom 1.66GHz Pfsense Firewall - Unmanaged switch Specifications: - 3 Vlans -- Vlan20 ? private network 192.168.2.1/24 -- Vlan30 ? guest network 192.168.3.1/24 -- Vlan40 ? vpn client network 192.168.4.1/24 - 2 Wifi SSIDs -- ABNET ? with access restricted to Vlan20 -- ABNET_GUEST ? with access restricted to Vlan30 - Only Vlan20 has access to the gateway (PFsense gateway) - Setup QoS - Vlan40 wan access is restricted to vpn service only. Failure to connect results in no WAN access. *Plan on using teamviewer for remote access. *(possible solution)  [obscured]  /blog/use-pfsense-to-selectively-route-through-a-vpn
Category: Networking & Security       
Skills: Cisco, Firewall, VPN       

j****son
 [?]
Sign in to view client's details.
| j****son
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 14, 2015  |  Ends: 20h, 59m  |   3 Proposals
need an outsourced vulnerability expert to establish testing procedures for our company. individual should be CCSP certified
Category: Networking & Security       
Skills: Security Analysis, Security Engineering       

p****ure
 [?]
Sign in to view client's details.
| p****ure *
|    United Kingdom
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 14, 2015  |  Ends: 20h, 47m  |   8 Proposals
I had a Cisco UC 540 replaced with a newer device. The only difference between the devices is that the newer one has more user licenses. The start up config was copied to the new device and now not all incoming phone numbers are working for call in. Thanks.
Category: Networking & Security       
Preferred Location: Romania

g****n27
 [?]
Sign in to view client's details.
| g****n27
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: 1-2 weeks  |  Posted: May 14, 2015  |  Ends: 19h, 49m  |   13 Proposals
I have a Designer of Network and I need to Designer a new network with Cisco like new router and other
Category: Networking & Security       

a****rco
 [?]
Sign in to view client's details.
| a****rco
|    Australia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 14, 2015  |  Ends: 17h, 10m  |   4 Proposals
I'm studying for my OSCP and as I go through the labs I'd like a mentor to keep me focused and provide some direction. There is so much information I'm finding it difficult to create a consistent workflow. I need my mentor to show me how to approach pentesting without the use of mass vulnerability scanners and metasploit. My certification exam will not allow me to use these tools so I don't want to learn them. My mentor should be familiar with Kali Linux. My schedule is not consistent but I need several hours of mentor time a week. A screenshare would be most convenient as I go through the lab network.
Category: Networking & Security       

d****in8
 [?]
Sign in to view client's details.
| d****in8
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 13, 2015  |  Ends: 5h, 7m  |   6 Proposals
Configure Checkpoint Firewall to connect to Fairpoint internet router; enable remote desktop connection from out side to the server in Checkpoint DMZ and to the servers behind the Checkpoint firewall. Enable VNP connection for the remote users. Setup two factor authontication using Radius server through Checkpoint firewall. Job site location Windham, New Hampshire.
Category: Networking & Security       
Preferred Location: United States

k****l15
 [?]
Sign in to view client's details.
| k****l15
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 11, 2015  |  Ends: 2d, 14h  |   1 Proposal
Hello, There is an issue with a fibre optic connection between a central switch and another external switch, where it appears as the switch port (on the central switch I think) is flapping continuously or auto-shutting itself blocking traffic. This is not owned equipment but belongs to a residency where there is no one in charge for networking. There is access to both switches but only from inside the LAN. The central switch model is a: Welcome to the Alcatel OmniSwitch 7000 (7700, I think) Software Version 5.1.6.292.R02 Service Release, December 21, 2006. The external switch is a 6000 series Alcatel switch I recall, however I do not have it right here. can provide the exact model later. Both ends connect to fibre optic ports. The same issue was resolved at some point 6 months ago by disabling STP for the link, however the config was not saved to flash and a power cut made the external switch lose its working running configuration. Now the link can not be re-established again no ...
Category: Networking & Security       

C****ing
 [?]
Sign in to view client's details.
| C****ing
|    Spain
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job