Save this Search
     
Sort by:
  • Posted Date
Engineering & Manufacturing
Fixed Price: Less than $500   |  Posted: 53 minutes ago  |  Ends: 14d, 23h  |   0 Proposals
simulation of metal bending in 3D solid works. initial job is proof of concept and setup of a single simulation. Then ongoing simulation of different bends by changing tools and materials in the simulation. Materials to be formed: 304 stainless steel, A36 mild steel, soft mild steel (60,000 PSI) 5052 H32 Aluminum, 6061-T6 aluminum. Thickness will range from 1mm - 6.35mm, 20 GA - 1/4" I can supply DXF profiles for the tooling to be used, examples have already been provided. Previous quote from you is $100 for setup / proof of concept then fixed price for additional simulations
Category: 3D Modelling       
Skills: SolidWorks       

D****gic
 [?]
Sign in to view client's details.
| D****gic
|    United States
Fixed Price: Not Sure   |  Posted: 1h, 53m ago  |  Ends: 14d, 22h  |   1 Proposal
I will like a very good product designer than can create an innovative portable salon sink which can be easily carried around and doesn't take a lot of effort or time to setup before use. It has to be portable and lightweight, easy to setup, and is easily collapsible into a rollable case to make it easy for transport. The designs I have seen are harder to use for freelance stylists because 1) the sink takes some time to setup so has to have been setup prior to the client visit 2) once the sink is setup prior to the client visit, the product becomes bigger and harder to transport as it is now bulky 3) there is no case for the sink in its pre-setup of post-setup phase so there's no sleek/professional way for stylists to transport it into clients homes. The sink design should also factor in the need to retrieve water and to drain out water. The design of the sink, most particularly of the base of the sink, has to be innovative in order to overcome these challenges and so the product de...
Category: Product Design       

E****Bar
 [?]
Sign in to view client's details.
| E****Bar
Fixed Price: About $2,500   |  Posted: 7h, 13m ago  |  Ends: 17d, 11h  |   5 Proposals
We need a Radar system developed that is camera based. The project will require the freelancer to build a pan, tilt and zoom solution+ the detection and tracking software. Operational Specification 1)System scans the sky looking for planes (Any Kind) 2)Detect at least 10 planes at the same time 3)Assign Ids to all detected plane (  [obscured]  /watch?v=LNaL58GRou4) Something like this but for the planes. 4)Track the plane selected by the operator 5)The software needs to calculate the GPS location of the plane + altitude + Speed + Distance of the plane from the camera + expected path 6)The system will need to identify the planes by make and name 7)Have a traditional radar GUI + Show the plane( that is being tracked) on Google Maps 8)Detection range of 5Km 9)Required accuracy rate of +-10m
Category: Product Design       

a****ski
 [?]
Sign in to view client's details.
| a****ski
|    Canada
Fixed Price: Not Sure   |  Posted: 8h, 24m ago  |  Ends: 14d, 15h  |   9 Proposals
We are looking for a quantity surveyor with advance estimating skills and experience that can perform detailed drywall & framing, and plastering & EIFS foam quantity takeoffs and estimates for high-rise buildings and commercial developments. We are looking for someone that is well organized, can communicate effectively, willing to review work performed, and that can send us some samples of his work, that is, previous quantities takeoffs to determine your level of experience. Our work assignments are on a project per project basis, fixed price that we can agree for each job upon review. We have the following projects available and need several good quantity surveyors that can assist us with all the projects that we have ongoing. Please find first project: Palazzo Dellaluna - Plans & Spec's (Click Link Below)   [obscured]  /s/4s0h9zzmdgwdzmu/PDL_ARCHITECTURE%20%281%29.pdf?dl=0
Category: Civil & Structural       

G****ing
 [?]
Sign in to view client's details.
| G****ing
|    United States
Fixed Price: $500 - $1,000   |  Posted: 14h, 3m ago  |  Ends: 14d, 9h  |   11 Proposals
Can you perform drainage plan both engineering and drafting for residentail and commercial projects in TExas? I will provide site plan and topo. I'll send cad files for a specific quote
Category: Civil & Structural       
Skills: AutoCAD, Civil Engineering       

s****ina
 [?]
Sign in to view client's details.
| s****ina
|    United States
Fixed Price: $5,000 - $10,000   |  Posted: 14h, 40m ago  |  Ends: 29d, 9h  |   12 Proposals
We need someone, or a group of people to put together a product by hand. These need to be mass produced a few times a year.
Category: Other - Engineering &...       
Preferred Location: United States

V****orp
 [?]
Sign in to view client's details.
| V****orp
|    United States
Fixed Price: Not Sure   |  Posted: 15h, 26m ago  |  Ends: 14d, 8h  |   7 Proposals
Need to develop an LED bulb with backup battery inside which will activate itself when the power goes off. No manual switch , no remote, must turn automatically on when the power goes off and if the wall switch is on. Must be able to turn off using wall switch. 900 lumens of light needed. Need 10-14 hours of runtime in good lighting in emergency mode when power goes off.
Category: Electrical       

n****imd
 [?]
Sign in to view client's details.
| n****imd
|    United Arab Emirates
Fixed Price: Less than $500   |  Posted: 17h, 4m ago  |  Ends: 14d, 6h  |   6 Proposals
A chemical coated yarn called black wick is to be wrapped with 10 mm width 18" white tissue. We need to design a mechanism that grips the black wick at both the ends, moves the tissue at 10 degree and grips it, twirls it, and grips the other end also. Attached video shows the manual process.
Category: Mechanical       

f****san
 [?]
Sign in to view client's details.
| f****san
|    India
Fixed Price: Not Sure   |  Posted: 21h, 6m ago  |  Ends: 14d, 2h  |   11 Proposals
Need to get a lay out design, architecture, 3D rendering done for a dental office project for a US client. Site CAD drawing available as input. Knowledge in US building codes required. Our client is in the process of remodeling/renovating an existing office (has rooms) to meet dental office requirements (need more rooms).We require 3D models of the proposed redesign/renovation and are also considering the possibility of creating a virtual tour feature that can be uploaded to our website. Prospective Freelancers would have to show competence in Architectural 3D modelling To give some idea on the scope of work 1. Building type: 3800 sf interior 2. No of rooms: 10 3. Toilets & Bath: 2 4. There will be structural changes inside to create more rooms. Deliverable: Models for each room, dental surgical rooms, LAB, sterilization, Dr Rooms Models for passages& corridors Models for reception, waiting lounge,staff lounge We will evaluate proposals based on the following 1) Qualificat...
Category: CAD       
Skills: 3D Modeling, Architecture, AutoCAD       
Preferred Location: India

k****gix
 [?]
Sign in to view client's details.
| k****gix *
|    United States
Fixed Price: $400 - $600   |  Posted: 21h, 42m ago  |  Ends: 14d, 2h  |   19 Proposals
We are searching for a professional 3d designer to perform some 3d modelings and designs ( High reviews and previous work is important ) Info And requirements for this Job :   [obscured]  /wp-contents/Info.rar
Category: 3D Modelling       
Skills: 3D       

F****Inc
 [?]
Sign in to view client's details.
| F****Inc *
Fixed Price: Not Sure   |  Posted: Aug 27, 2015  |  Ends: 13d, 21h  |   32 Proposals
I am looking for someone experienced in Solidworks to convert an existing AutoCAD 2D drawing into a 3D drawing. The drawing is of a newly designed irrigation valve and the key that fits into it. A pdf of the 2D drawing is attached for review. The picture in the pdf is a compressed air coupling that the design is similar to the part being designed as a reference. Experience with design of similar products would be helpful. Please provide you experience, estimated cost and time to complete.
Category: 3D Modelling       
Skills: 3D, AutoCAD, SolidWorks       

a****urf
 [?]
Sign in to view client's details.
| a****urf
|    Thailand
Fixed Price: $40 - $50   |  Posted: Aug 26, 2015  |  Ends: 13d, 12h  |   10 Proposals
I need mockups showing exact measurements and features of my cup designs. The final mock up files will need to be production ready. So i can just hand these files over to the manufacture. There will be two versions of this cup design. Both will be the same basic design, style and colors. The only difference in models will take place at the base of the cup. One will have a motor stir. The other will have a secret compartment. So to recap: I need two production sketches and 3d mock up of how the product will look for both versions. Examples of concept sketch:   [obscured]  /search?q=product+concept&espv=2&biw=1280&bih=658&source=lnms&tbm=isch&sa=X&ved=0CAYQ_AUoAWoVChMIp9e-s_LHxwIVCxSSCh2cgg7K#tbm=isch&q=product+concept+sketch Example of concept 3d rendering:   [obscured]  /search?q=product+concept&espv=2&biw=1280&bih=658&source=lnms&tbm=isch&sa=X&ved=0CAYQ_AUoAWoVChMIp9e-s_LHxwIVCxSSCh2cgg...
Category: Product Design       

v****man
 [?]
Sign in to view client's details.
| v****man
|    United States
Fixed Price: Not Sure   |  Posted: Aug 26, 2015  |  Ends: 13d, 11h  |   41 Proposals
I need someone who can make for me a 3D model of an idea i have. I need whatever is needed in order to start a patent and manufacturing. i have attached a basic sketch of what the design should resemble.
Category: 3D Modelling       
Skills: 3D, Manufacturing       

t****093
 [?]
Sign in to view client's details.
| t****093 *
|    United States
Fixed Price: Not Sure   |  Posted: Aug 26, 2015  |  Ends: 13d, 11h  |   12 Proposals
I need someone who can make for me a 3D model of an idea i have. I need whatever is needed in order to start a patent and manufacturing. i have attached a basic sketch of what the design should resemble.
Category: Product Design       

t****093
 [?]
Sign in to view client's details.
| t****093 *
|    United States
Fixed Price: Less than $500   |  Posted: Aug 26, 2015  |  Ends: 13d, 9h  |   7 Proposals
I need developed complete electronics (populated PCB) as described here:   [obscured]  /controller/ Long term production will be required and I will need a cost per unit/ in volume of 5-10 units but production is NOT a part of this platform. Just the development which includes the design and working test unit. I'll need all paperwork associated with the design. Each time we re-designed we improved the end product substantially. That is why I am making this query. This will be our last improvement (I said that before) so it needs to be done correctly. Note: I have several versions in the worldwide market since 2008 so I know EXACTLY what my costs are. Any/all bullshit will be ignored. I wasn't born last night. Note: This is high school 101 electronics, very simple, uncomplicated. Note: I do NOT want to hear about your qualifications, your team, blah, blah, blah. Either you contact me to get to work or leave me alone! Note: If you have responded previously, you...
Category: Electrical       

a****man
 [?]
Sign in to view client's details.
| a****man
|    United States
Fixed Price: Not Sure   |  Posted: Aug 26, 2015  |  Ends: 13d, 8h  |   27 Proposals
Modelling a perfume bottle and its accessories in order to make it manufacturable for prototyping first.
Category: 3D Modelling       
Skills: SolidWorks       

f****ys_
 [?]
Sign in to view client's details.
| f****ys_
|    France
Fixed Price: Not Sure   |  Posted: Aug 26, 2015  |  Ends: 13d, 7h  |   11 Proposals
I am a landscape architect and have created a design for a client that includes a stainless steel portico structure that will overhang the entry stairs of a commercial building. The structure is intended to measure approximately 20' wide X 10' high and is intended to be curved. I anticipated supporting it by 10"X10" stainless posts (or whatever works structurally and visually). The client wants to move forward with the project but I am not a structural designer. I need someone skilled with structural/ architectural experience to figure out the final details of the structure to fit with my plan intent. I need final details for fabrication of the shelter with foundation in AutoCAD so I can finalize the layout and we can get estimates from local fabricators for the structure. You can view a 3D video of the front entry design showing the portico concept here:   [obscured]  /watch?v=9aHewfo2I-I Plan is also attached.
Category: Architecture       

L****ct1
 [?]
Sign in to view client's details.
| L****ct1
|    United States
Fixed Price: Less than $500   |  Posted: Aug 26, 2015  |  Ends: 13d, 6h  |   41 Proposals
I have a logo. I would like it made into 3d parts and combined into an assembly. Just copy the design
Category: 3D Modelling       
Skills: 3D       

h****760
 [?]
Sign in to view client's details.
| h****760
|    United States
Fixed Price: Less than $500   |  Posted: Aug 26, 2015  |  Ends: 1d, 5h  |   7 Proposals
We would like a price to do the take-off on the exterior framing, sheeting, and insulation from the attached plans.
Category: Civil & Structural       

e****tor
 [?]
Sign in to view client's details.
| e****tor
Fixed Price: Less than $500   |  Posted: Aug 26, 2015  |  Ends: 5d, 5h  |   13 Proposals
We have a camera / scanner that we use in the manufacturing. We need to mount an air nozzle to it to protect the face from the environmental I have attached a sketch in powerpoint as well as the cad of the air nozzle. we are looking for mechanical services for some updates to the retention of the scanner and the air knife retention to the scanner.
Category: Mechanical       

I****ual
 [?]
Sign in to view client's details.
| I****ual
Fixed Price: Less than $500   |  Posted: Aug 26, 2015  |  Ends: 1d, 4h  |   32 Proposals
Small Construction Company needs complete 3D architectural rendering of 4 unit building. We are in the planning stage in the development of the 4 building and would like to provide prospective investors and contractors with a real visual of the projects architectural design and construction for both the exterior and interior design of the building. Finished project must be presented in Color, "Still", 3d and Powerpoint. We have many similar projects in our pipeline requiring same service.
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

b****lh1
 [?]
Sign in to view client's details.
| b****lh1
|    United States
Fixed Price: $80 - $130   |  Posted: Aug 26, 2015  |  Ends: 13d, 4h  |   1 Proposal
Coding and numerical simulation using ABAQUS and UMAT Need numerical simulation working experience for this kind of work. See the attached paper for the overview of the work.
Category: Mechanical       

m****d90
 [?]
Sign in to view client's details.
| m****d90
|    Germany
Fixed Price: Not Sure   |  Posted: Aug 26, 2015  |  Ends: 13d, 3h  |   5 Proposals
Most of the time I have 120VAC available via generators. However, when the generators (which is the prime power source) run out of diesel I need at least an hour or two to continue powering my sensors and cell modem. They both require 12VDC and at full draw require 350ma. This is the peak when the cell modem is transmitting. While not transmitting the requirement is less than 100ma. So I need batter backup. Solar is another option as more and more I am going to places where the generators are only used at night (light towers). I may have to get more use out of this option at some point. Here are the general specifications: - 120VAC input - Battery backup (4x AA or equivalent) - Solar backup (12v 10W panel) - 12-15V DC output for sensors, cell modem, and 5VDC regulator - a voltage meter scaled 0-5V from 10-18V for the MCU ADC - digital output for detection of battery (HIGH on AC, LOW on Battery Backup). Please send me a quote on this project for a Schematic, BOM and general board l...
Category: Contract Manufacturing       

a****egt
 [?]
Sign in to view client's details.
| a****egt
|    Canada
Fixed Price: Less than $500   |  Posted: Aug 26, 2015  |  Ends: 13d, 3h  |   0 Proposals
The project is to manufacture; 1. a 2cmx10cm transmitter device which needs to transmit a basic signal over the range of up to 200 meters with a built in battery. The battery life could be anything from at least one hour. 2. two sets of receivers which will be placed 50 to 100 meters apart from one another to a fixed location. The receivers -by using the signal from the transmitter- has to calculate the distance between themselves and the transmitter with x,y,z coordinates using, themselves as two fixed reference points. The receivers should have a flashing red LED to indicate if and when the transmitter is 100 meters away from the receivers horizontally (y axis) and 10/15 meters away from the horizon vertically (x axis) The transmitter should have a button to voluntarily activate the red LED lights on the receivers. These products must be manufactured and dispatched to me ASAP. The payment method will be discussed.
Category: Product Design       

m****ren
 [?]
Sign in to view client's details.
| m****ren
|    United Kingdom
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job