Save this Search
     

All Jobs"Testing"Engineering & Manufacturing

 (3,267 results)  
Sort by:
  • Posted Date
Fixed Price: $500 - $1,000   |  Posted: Aug 31, 2015  |  Ends: 58d, 23h  |   8 Proposals
We are looking for a hardware/software developer (mechanical/electronic engineer) who can implement a complete custom project for a GPS/GSM/GPRS tracking unit for motorcycles. The units purpose is to gather GPS data and other data (live tracking, speed, distance and other common tracking features) and track the information back to a web application and alerts in mobile phone. SKILLS: Schematic Circuit Diagram, Circuit Design, Electrical Drawing, Electrical engineering, Electronic Design, Electronics, Embedded C, Embedded Systems, GPS Development, PCB Design If you DO NOT have a prior experience using GPS/GSM/GPRS module in vehicle tracking, please do not bid on this project, we would prefer to see prior work before we award the project. REQUIREMENTS: 1. Sending GPS co-ordinates to our server (GPS/GPRS) and/or SMS alerts for motion. Tracked using IMEI; 2. Have a rechargeable lithium battery. Basing your experience you can choose the best one. Long life battery is appreciated; 3. Must...
Category: Product Design       

i****ide
 [?]
Sign in to view client's details.
| i****ide
|    Brazil
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 28, 2015  |  Ends: 11d, 4h  |   3 Proposals
I am designing a universal card. See   [obscured]  /wiki/Universal_card. I would like to enable it to work in a wide range of readers. But as a small company it is expensive to set up an extensive testing program to do this. I am looking for an electrical engineering consultant with in depth knowledge about dip and motorized magnetic stripe readers that could guide us in our development. English speaking a requirement.
Category: Electrical       

t****hpe
 [?]
Sign in to view client's details.
| t****hpe
|    United States
Fixed Price: Less than $500   |  Posted: Aug 26, 2015  |  Ends: 9d, 3h  |   11 Proposals
I need developed complete electronics (populated PCB) as described here:   [obscured]  /controller/ Long term production will be required and I will need a cost per unit/ in volume of 5-10 units but production is NOT a part of this platform. Just the development which includes the design and working test unit. I'll need all paperwork associated with the design. Each time we re-designed we improved the end product substantially. That is why I am making this query. This will be our last improvement (I said that before) so it needs to be done correctly. Note: I have several versions in the worldwide market since 2008 so I know EXACTLY what my costs are. Any/all bullshit will be ignored. I wasn't born last night. Note: This is high school 101 electronics, very simple, uncomplicated. Note: I do NOT want to hear about your qualifications, your team, blah, blah, blah. Either you contact me to get to work or leave me alone! Note: If you have responded previously, you...
Category: Electrical       

a****man
 [?]
Sign in to view client's details.
| a****man
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 25, 2015  |  Ends: 7d, 23h  |   1 Proposal
Dear Sir or Madam, I am looking for a Houston area ONLY local engineering group or engineer to observe and supervise testing at my Houston (Spring Branch) facility of a door security product to ASTM F476 (latest ver. attached). The project would require: ? some minimal initial consultancy with a site visit to inspect the construction of the test assembly and go over test day particulars, ? a visit on the test day, supervision of the actual short test (est.1/2 Day), recording of results including a failure analysis (if applicable), and ? a written report on the test and its results. This is a fun quick test for which you may wish to be paid a flat rate. Or we can engage you hourly. There may be subsequent rounds of test work or other product design or CAD work depending on your skills. Thanks in advance for your consideration, Harper Jones JONES MANUFACTURING SERVICES LLC 1511 Bingle Rd. Ste D-8 Houston Texas 77055 713.392.6990   [obscured]  
Category: Product Design       

h****s69
 [?]
Sign in to view client's details.
| h****s69
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 24, 2015  |  Ends: 22d, 4h  |   6 Proposals
We are designing a new product required for various industrial inspection applications. This is a high-speed instrument involving an analog front end, A/D converter, and a DSP section using an FPGA and Freescale MSC8256. Knowledge of PCIe and Ethernet is important. This is an exciting opportunity to participate in developing a new state-of-the-art system.
Category: Electrical       
Preferred Location: Canada

d****all
 [?]
Sign in to view client's details.
| d****all
|    Canada
Fixed Price: Less than $500   |  Posted: Aug 24, 2015  |  Ends: 21d, 16h  |   8 Proposals
We are looking for a person with a high level of knowledge and relevant practical experience to create 50 questions for Plumbing The test must contain 3 types of questions (simple choice, multiple choices, true/false) allocated among 4 skill levels (beginner, intermediate, advanced, expert) and organized among several task-based subtopics. Thank you for your interest!
Category: Other - Engineering &...       
Skills: Plumbing       

o****bal
 [?]
Sign in to view client's details.
| o****bal
|    Canada
Fixed Price: Less than $500   |  Posted: Aug 24, 2015  |  Ends: 21d, 16h  |   6 Proposals
We are looking for a person with a high level of knowledge and relevant practical experience to create 50 questions for Carpentry The test must contain 3 types of questions (simple choice, multiple choices, true/false) allocated among 4 skill levels (beginner, intermediate, advanced, expert) and organized among several task-based subtopics. Thank you for your interest!
Category: Other - Engineering &...       
Skills: Carpentry       

o****bal
 [?]
Sign in to view client's details.
| o****bal
|    Canada
Hourly Rate: More than $50 / hr   |  Duration: 1-2 weeks  |  Posted: Aug 21, 2015  |  Ends: 6d, 5h  |   9 Proposals
Hi, I need a structural/load bearing calculation done for support piers for a structure. We have the weight/loads, and a soil test. The piers will be almost completely buried(~3in above ground, ~3-6 feet poured-in-place into a sonotube). Must be a licensed engineer in a U.S. state. Ideally licensed in WA state, but not required. If you have the skillset, we could also use help with stormwater calculations/design verification.
Category: Civil & Structural       
Preferred Location: North America

J****R26
 [?]
Sign in to view client's details.
| J****R26
|    United States
Fixed Price: $20,000 - $100,000   |  Posted: Aug 19, 2015  |  Ends: 2d, 7h  |   19 Proposals
I am designing a modern electronic calculator with built in functions for the energy industry. this project will involve: System requirement analysis system architecture electronic, hardware and software requirement analysis electronic, hardware and software design system test system integration electronic, hardware and software test electronic, hardware and software integration electronic construction hardware construction software construction
Category: Product Design       

M****rgy
 [?]
Sign in to view client's details.
| M****rgy
|    United States
Fixed Price: Not Sure   |  Posted: Aug 18, 2015  |  Closed  |   5 Proposals
The purpose of this job is to test the tensile strength / breaking force of test articles and to report the results. The test articles will be knots made by two pieces of fishing line. There would be a total of 190 test articles constructed of various line diameters (0.26 mm to 0.90 mm approximately), manufacturer-claimed breaking strength (30 to 80 lbs) and line materials (spectra, monofilament and fluorocarbon). PLEASE READ THE ATTACHED JOB DESCRIPTION FOR MORE INFORMATION
Category: Mechanical       

m****bes
 [?]
Sign in to view client's details.
| m****bes
|    United States
Fixed Price: Not Sure   |  Posted: Aug 18, 2015  |  Ends: 15d, 22h  |   13 Proposals
Company, NovaRx LLC a start-up venture in the USA, is looking to research, develop and manufacture a neck brace in India. A beta version has already been developed and tested here on users. We are looking to improve on the design and manufacturing methods to produce and successfully market this brace. Device uses gel and plastics like polyurethane and polyethylene. It is presently assembled using Radio-Frequency welding. Company's mission is to produce a device of the highest quality at competitive cost. This project is divided into 3 phases. The first phase is to modify the design of the product and produce CAD drawings and other information needed, especially in regard to materials to be used. The second phase is the production of prototypes that are to be field tested. The final phase of this project is to manufacture the devices. Company is looking to hire an individual, group or entity to help reach its objectives. It is preferred that work is done on a fixed price basis for t...
Category: CAD       
Skills: Manufacturing, 3D Printing, CAD/AutoCAD       
Preferred Location: India

p****pal
 [?]
Sign in to view client's details.
| p****pal
|    United States
Fixed Price: $500 - $4,500   |  Posted: Aug 18, 2015  |  Ends: 21h, 34m  |   13 Proposals
Seeking engineer well experienced in bluetooth devices for smartphones that can provide a consolidated and refined schematic and firmware. **Board layout, assembly and testing will be handled here.** ***Please review your quotes for price and delivery. The tasks here do not require a man month to complete as you are working off of a reference design*** Need firmware refinement and adaption of a Microchip Technology RN-52-EK Development kit coupled with barebones Arduino board. Basically a bluetooth device that controls music/audio on Iphone/Android phones, and or pick up/answer incoming calls (Arduino needed to handle switching modes) Most of the control and features are currently demonstrated in the kit with an iphone, but has some issues with Android phones.The working prototype will be provided to assist the work. switches, mic, speaker, and vibration motor have been selected for working model. An NDA will be required. A Product requirements document will be provided when proje...
Category: Electrical       
Skills: Electronics, Bluetooth, Digital Electronics       

m****ner
 [?]
Sign in to view client's details.
| m****ner
|    United States
Fixed Price: More than $10,000   |  Posted: Aug 18, 2015  |  Ends: 21h, 30m  |   16 Proposals
We are looking for engineering services for our project. The scope of the work are : 1. Engineering / validation & optimization on the basis of the current works & material 2. Outsourcing (BOM) detailed list of components /cost price/ all specs / suppliers etc.. 3. The making of prototype(s)(+1) head of series to be "homologated"/ certified 4. Homologation certification + Documents & tests 5. Assembly line certification quality control process for assembly procedure ISO 9001
Category: Mechanical       

j****on3
 [?]
Sign in to view client's details.
| j****on3 *
|    Belgium
Fixed Price: More than $10,000   |  Posted: Aug 18, 2015  |  Ends: 19h, 21m  |   16 Proposals
We are looking for engineering services for our project. The scope of the work are : 1. Engineering / validation & optimization on the basis of the current works & material 2. Outsourcing (BOM) detailed list of components /cost price/ all specs / suppliers etc.. 3. The making of prototype(s)(+1) head of series to be "homologated"/ certified 4. Homologation certification + Documents & tests 5. Assembly line certification quality control process for assembly procedure ISO 9001
Category: Mechanical       

j****on3
 [?]
Sign in to view client's details.
| j****on3 *
|    Belgium
Fixed Price: $500 - $1,000   |  Posted: Aug 15, 2015  |  Closed  |   2 Proposals
Controller: 250 v DC, brush, PMDC motor, variable, reversible, analog, open loop, compact. V out ? 0?230 Vdc V source ? up to 450 vdc I operation ?< 10 A Protection features: Short circuit Overcurrent >12 A Over voltage >550 v dc Over heat > 60-80C Operation temperature - -20C ? +40C Operation altitude >6000 m above sea leval Reverse motor: power ON at out ~100 V instantaneous toggle switch of h-bridge control. Continuous operation power 1.5 kW at 220 vdc Prototype. Similar controller based on Copley 432, (  [obscured]  /MC/Drive/DCbrush_less.html#4xx), <225 Vdc source (discontinued, unavailable) with all above features was used in described conditions for 15 years - never failed. For high voltage (400 Vdc) application similar controller was built around 100A40 Advanced Motion Control (  [obscured]  -m-c.com/products/analog_brush.html?tab=3) servo amplifier. It is too big for current project. General idea of new controller: PWM controller + H-bridge dr...
Category: Other - Engineering &...       
Preferred Location: United States

z****nov
 [?]
Sign in to view client's details.
| z****nov
|    United States
Fixed Price: Less than $500   |  Posted: Aug 15, 2015  |  Closed  |   8 Proposals
Im looking to have a PCB board created to control High power LED strip with DMX lighting control. I have a PCB that I want it based on but with alterations. It will be housed in a custom 19" rack mount enclosure. The PCB will need to Power upto 6 outputs of LED Strips and around 7meters each all the strip is 24v at 14.4 watts a meter. It will need to be controlled on DMX so in total take up 18 DMX channels one for each RGB channel. there will need to be a small display with buttons to change the dmx start address and also so it can be used stand alone with test functions The LED Strip is on 4pin XLR and there will be panel mount PCB mount XLR 4pin connectors on the front of the enclosure and I would like the PCB to mount to these.
Category: Electrical       
Skills: PCB Design       

l****ett
 [?]
Sign in to view client's details.
| l****ett
|    United Kingdom
Fixed Price: Less than $500   |  Posted: Aug 14, 2015  |  Closed  |   9 Proposals
The electronics you will be developing replaces that as seen here:   [obscured]   It is being replaced by 2 separate versions: XEROS1 NP (non portable version) XEROS1 GO (portable version) The electronics is EXACTLY the same but the PCB configurations are different. After successful development, you will be asked to provide the electronics throughout the years. We typically order 5-10 units at a time depending on sales. You can do the PCB assembly yourself or hire it out. Regardless, I'll need a COST including shipping to our facility for assembly of the XEROS. We sell internationally. Considering, I would like to discuss security of (your rights). You will be provided with the enclosures for fit and testing. Refer to the attached PDF for details. I'm well aware of the simplicity of this request. It is basic electronics 101. Kindly, Al Toman, President VALCORP inc
Category: Electrical       

a****man
 [?]
Sign in to view client's details.
| a****man
|    United States
Hourly Rate: Not Sure   |  Duration: 1-3 months  |  Posted: Aug 14, 2015  |  Closed  |   9 Proposals
Looking for an experienced product designer for prototype design and software development to build a prototype from an existing design/concept. It is a product that synchs with mobile devices, tracks usage data, integrates with Bluetooth, and allows for charger access . The designer(s) must be familiar with app development, cellular service, product manufacturing materials, blue tooth technology, and software integration. If you have experience with prototyping with a fast turnaround rate, I would like to hear from you. Details and photos of my design will be shared when a freelancer has been selected. The freelancer must sign an NDA before beginning the project. Once the designer is selected, they will be provided with detailed drawings of the concept and a larger requirements description. Requirements as follows: Execute and sign NDA Must have excellent English writing and verbal skills. Create a professional 3D CAD model (to proper measurement scale) of the device Review ...
Category: Product Design       

A****014
 [?]
Sign in to view client's details.
| A****014
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: Aug 13, 2015  |  Ends: 7d, 1h  |   14 Proposals
I would like bids on designing the circuits, providing gerber files, writing code and providing a test article. This item will be FCC certified in the US and must meet all compliance requirements. This device will be based on the following CML chip while operating and approved only in the MURS bands to avoid FCC operator license requirements.   [obscured]  /products/CMX883_Baseband_Processor_for_FRS_MURS_PMR446_and_GMRS_Leisure_Radios/ I would like the bids to include the incorporation of a GPS chip with antenna and routines to locate the distance, bearing and position of another matching radio. I have identified the formula that will handle this. The screen should be four lines with OLED yellow display. There will be about 20 menu screens to set up groups, poll locations, text both ways, review old messages This will be a small qwerty keyboard similar to Blackberry. There will be no voice capability included. I need someone with strong radio design skills and a circui...
Category: Electrical       
Preferred Location: India/Southern Asia, Eastern Asia

R****777
 [?]
Sign in to view client's details.
| R****777
|    United States
Fixed Price: $60 - $80   |  Posted: Aug 13, 2015  |  Closed  |   0 Proposals
As reservoir engineer, please choose the appropriate reservoir model to do this challenge. Running a simulation is far cheaper than actually drilling a well. Let's assume that constructing a numerical reservoir simulation model is the correct approach for the reason that you are going to achieve. Construct a report to discuss the application of reservoir simulation tools to a reservoir engineering scenario of your choice. You can build a model using ECLIPSE and present your results to support your report to your supervisor within your team. In your report you must include or refer to the following points: a,Reserves estimation, b,field appraisal, and c,field development plan. d,Forecast production decline e,Reservoir drive mechanisms f,Well test analysis g,Material balance
Category: Other - Engineering &...       

S****ays
 [?]
Sign in to view client's details.
| S****ays
|    Kenya
Fixed Price: Not Sure   |  Posted: Aug 13, 2015  |  Closed  |   2 Proposals
We are testing an inertial sensor for indoor poisitionning, using sensor units such as the following XSENS   [obscured]  /shop/mti-100-series/mti-300-ahrs/mti-300-ahrs-2a5g4-dk I need a strap, to be positioned on the shoe or the ankle, where the sensor can be inserted in such a way that : - the sensor is positioned on top of the shoe, close to horizontal - the sensor is fully secured on the foot (all the motions from the foot must be transmitted to the sensor, without adding or removing vibrations) - the sensor runs a cable up to the waist -the strap is easy to remove/setup
Category: Mechanical       

F****erd
 [?]
Sign in to view client's details.
| F****erd
|    Austria
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 12, 2015  |  Closed  |   4 Proposals
Hello, We need a MSDS certificate for our product to sell on Amazon. The product is a MP3 player for kids and Amazon requires anything with a battery to be certified as hazardous free. Product is here:   [obscured]   USA only, need ASAP.
Category: Other - Engineering &...       

l****ets
 [?]
Sign in to view client's details.
| l****ets
|    United States
Hourly Rate: $40 - $50 / hr   |  Duration: Not Sure  |  Posted: Aug 12, 2015  |  Closed  |   0 Proposals
Hi, I am looking for someone who has experience with Nucleic Acid Purification ("NAP") for soil samples. I'd like your help with some research I am conducting on when, how, and why NAP is conducted on soil and stool samples. If you are interested, please send across a description of your relevant experience with NAP and soil testing and we can set up an initial 30 minute phone conversation for $50. Thanks, Andrew
Category: Civil & Structural       

a****111
 [?]
Sign in to view client's details.
| a****111
|    United States
Fixed Price: Less than $500   |  Posted: Aug 11, 2015  |  Closed  |   8 Proposals
Hi, I want to build a special purpose machine for my work. We manufacture a product which requires three tests to be done, followed by one manual processes. As of now, there are four operators, three of whom do testing and one does the remaining process. I am looking to automate this line so that only one or two operators are required and production increases substantially. The tests to be done are inductance, resistance and high voltage. All the testing equipment will give pass fail digital signal. If the piece passes the test, it will move on to next stage, if it fails, it should be removed from the line. The process mentioned earlier involves applying adhesive which can also be done using a machine when the fixture contaiting our product is in place. I have thought over it and think that it could be done in a linear fashion or rotary fashion, whatever is suitable. The loading and unloading of the pieces in the fixture can be manual for starters but needs to be automated as well usi...
Category: Product Design       

p****jhb
 [?]
Sign in to view client's details.
| p****jhb
|    India
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 11, 2015  |  Closed  |   5 Proposals
Looking for someone to 3D print a prototype from a STL file. Prototype must be printed with a soft rubber-like material that has a Shore "A" scale hardness value in the 20-40 range (possibly PolyJet rubber material such as TangoBlack, or TangoBlackPlus). Preferably it would be printed in the color black. The prototype is approximately 5" X 1" X 1" and has some walls that are 1 mm thick. Will need two copies initially for review & testing. Once prototype testing is completed, plan to order one to two dozen more copies.
Category: 3D Modelling       
Skills: 3D, 3D Printing, Rapid Prototyping       
Preferred Location: North America

w****inz
 [?]
Sign in to view client's details.
| w****inz
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job