Save this Search
     
Sort by:
  • Posted Date
Results for '3d Modelling Manufacturing Design'
Fixed Price: Less than $500   |  Posted: Aug 29, 2015  |  Ends: 10d, 13h  |   13 Proposals
We are constructing a 10,000 Capacity Amphitheater. IT will be a Stage amphitheater with a Grass Rised amphitheater No seats...Just grass--With a 10 Ft retaining wall. I will have an autocad of the venue and specs of the Stage, Grounds from General Contractor. I want you to provide 3D 360 degree renderings of the venue with both crowds as if music concert was in place as well as renderings empty. I would like to have Music Venue experience or past experience. Provide samples of Music related portfolio. Also want to have 3D video of flythru as well included. Need done 1 week from Job Acceptance.
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

S****CFF
 [?]
Sign in to view client's details.
| S****CFF
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: Aug 28, 2015  |  Ends: 9d, 11h  |   8 Proposals
Hi, We need very specific device manufacturing (prototype + logic). Size of device must be not more then iBeacon (but here can be any server device), when some one near range of device (range is 2-3 metres), device must catch it (i mean identify it) and send signal to WiFi router or something else. Mobile Devise can be Android / IOS and we are not able to install any software to device. Probably you can catch BT or WiFi or any else signal from device. Share your budget. At first we need ~ 100 devices. Thanks!
Category: Product Design       

C****Ltd
 [?]
Sign in to view client's details.
| C****Ltd
|    Russia
Fixed Price: Not Sure   |  Posted: Aug 28, 2015  |  Ends: 9d, 3h  |   13 Proposals
I will like a very good product designer than can create an innovative portable salon sink which can be easily carried around and doesn't take a lot of effort or time to setup before use. It has to be portable and lightweight, easy to setup, and is easily collapsible into a rollable case to make it easy for transport. The designs I have seen are harder to use for freelance stylists because 1) the sink takes some time to setup so has to have been setup prior to the client visit 2) once the sink is setup prior to the client visit, the product becomes bigger and harder to transport as it is now bulky 3) there is no case for the sink in its pre-setup of post-setup phase so there's no sleek/professional way for stylists to transport it into clients homes. The sink design should also factor in the need to retrieve water and to drain out water. The design of the sink, most particularly of the base of the sink, has to be innovative in order to overcome these challenges and so the product de...
Category: Product Design       

E****Bar
 [?]
Sign in to view client's details.
| E****Bar
Fixed Price: $75 or less   |  Posted: Aug 27, 2015  |  Ends: 8d, 14h  |   24 Proposals
We are in need of a designer that specializes in patterns and prints for our swimsuit collection. The designs will be manufactured for woman and little girls for our Mommy and Me collection. What is needed we would like for you to work hand in hand with the founder to finalize designs. The inspirations is Sexy, Bold but Elegant designs. Our company: Were a well established swimsuit company in the US that specialize in woman feeling sexy, elegant and bold in their swimwear. Please note: We are looking for a permanent Freelance Designer that will be working with our team and future jobs. Our administrative department will draft up a permanent contract and salary. These designs will be displayed on fashion runway shows, blogs, Magazines and other media outlet.
Category: Graphic Design       

S****nds
 [?]
Sign in to view client's details.
| S****nds
|    United States
Fixed Price: Not Sure   |  Posted: Aug 27, 2015  |  Ends: 8d, 8h  |   15 Proposals
Need to get a lay out design, architecture, 3D rendering done for a dental office project for a US client. Site CAD drawing available as input. Knowledge in US building codes required. Our client is in the process of remodeling/renovating an existing office (has rooms) to meet dental office requirements (need more rooms).We require 3D models of the proposed redesign/renovation and are also considering the possibility of creating a virtual tour feature that can be uploaded to our website. Prospective Freelancers would have to show competence in Architectural 3D modelling To give some idea on the scope of work 1. Building type: 3800 sf interior 2. No of rooms: 10 3. Toilets & Bath: 2 4. There will be structural changes inside to create more rooms. Deliverable: Models for each room, dental surgical rooms, LAB, sterilization, Dr Rooms Models for passages& corridors Models for reception, waiting lounge,staff lounge We will evaluate proposals based on the following 1) Qualificat...
Category: CAD       
Skills: 3D Modeling, Architecture, AutoCAD       
Preferred Location: India

k****gix
 [?]
Sign in to view client's details.
| k****gix *
|    United States
Fixed Price: Less than $500   |  Posted: Aug 27, 2015  |  Ends: 8d, 4h  |   7 Proposals
Hi, I would like someone to build a fully detailed BIM family model of a rooflight. (Providing the work is of great standard, then this could turn into many rooflights and therefore many jobs) I will provide detailed 2D information from the rooflight manufacturer, such as plans, elevations, dimensions, material spec, workings, openings, fasteners, clips, mechanisms etc etc. You will need to build this into a BIM model that can be used in Revit. It will need to be a fully detailed model, including all parts and components, and including all information such as fire rating, acoustic rating, recyclability etc so that it can be scheduled correctly in Revit. Thankyou
Category: Graphic Design       
Skills: 3D Modeling, AutoDesk Revit, BIM       

D****ele
 [?]
Sign in to view client's details.
| D****ele
|    United Kingdom
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 27, 2015  |  Ends: 8d, 0h  |   5 Proposals
We are an interior design company planning to launch an online shop which specializes in custom carpentry works for interior fixtures. We would like to invite creative designers to come up with designs for fixed size items like TV console, feature wall, bed frames, tables etc. We will be providing the standard sizes and materials to be applied to your design as items will be produced and sold by our company. We are offering a 5% fixed royalty fee on each submitted and approved design we put on sale on our website. Your profile will be featured on the product page of items designed by you. We only accept high quality 3D rendered images and original design. You may submitted as many products as you wish but is subjected to approval. Methods of production should be woodwork, metal or 3D printed. Other materials are permitted but subjected to approval.
Category: Interior Design       

v****ces
 [?]
Sign in to view client's details.
| v****ces *
|    Singapore
Fixed Price: $40 - $60   |  Posted: Aug 27, 2015  |  Ends: 7d, 23h  |   11 Proposals
Hello, My name is Akintunde Sogunro. I am the director and producer of the award winning inspirational documentary film Victory and author and creator of the ogirinal children's book series Mama Stitches. Mama Stitches is a story of how a mother dog, her puppies and their owner sew clothes for the homeless. How they cover with love! Mama Stitches is the female dog(SEE MAIN THREE CHARACTERS IMAGE- MAMA STITCHES IS FAR LEFT DOG WITH ' AGAPE" SHIRT) I am looking for a 3D designer to create a 3D model for the full size Mascot of Mama Stitches that I am looking to have manufactured. I have attached a sample of the size and scale I am looking for in the attached (MILO MASCOT IMAGE). That is an image of another full size dog mascot. I will need the design in by the end of the week. Mama Stitches is a Matisse breed of dog( SEE ATTACHED MATISSE IMAGE) I am looking for a sensational 3D designer whom I hope to begin a long term working relationship with which would mean further work down t...
Category: Art       

t****pro
 [?]
Sign in to view client's details.
| t****pro
|    United States
Fixed Price: Not Sure   |  Posted: Aug 26, 2015  |  Ends: 7d, 17h  |   23 Proposals
I need someone who can make for me a 3D model of an idea i have. I need whatever is needed in order to start a patent and manufacturing. i have attached a basic sketch of what the design should resemble.
Category: Product Design       

t****093
 [?]
Sign in to view client's details.
| t****093 *
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 26, 2015  |  Ends: 7d, 16h  |   3 Proposals
Start-up company needing services from ideation to production for a beach sandal company. Currently in the initial stages of the process. The beach sandal company will strive to be eco-friendly but fashion forward. We would like to utilize recycled products. We are looking to hire someone that has expertise in finding a manufacturer that fits our needs. We would like to manufacture in the USA.
Category: Product Design       

j****v10
 [?]
Sign in to view client's details.
| j****v10
|    United States
Fixed Price: Less than $500   |  Posted: Aug 26, 2015  |  Ends: 6d, 10h  |   35 Proposals
Small Construction Company needs complete 3D architectural rendering of 4 unit building. We are in the planning stage in the development of the 4 building and would like to provide prospective investors and contractors with a real visual of the projects architectural design and construction for both the exterior and interior design of the building. Finished project must be presented in Color, "Still", 3d and Powerpoint. We have many similar projects in our pipeline requiring same service.
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

b****lh1
 [?]
Sign in to view client's details.
| b****lh1
|    United States
Fixed Price: Not Sure   |  Posted: Aug 25, 2015  |  Ends: 6d, 13h  |   16 Proposals
I need to make a prototype of an earpiece-like device that can receive transmission of soundwaves from underwater. I am thinking of using bluetooth, but I am not sure if it works underwater. I was also thinking of using radio transmission, but I would like you expertise on which option, or if there are any other options, would be best. .
Category: Electrical       

a****jin
 [?]
Sign in to view client's details.
| a****jin
|    United States
Fixed Price: Not Sure   |  Posted: Aug 25, 2015  |  Ends: 6d, 12h  |   33 Proposals
I need an multifunctional iPhone 6 case designed/innovated to be presented as a final prototype. I have already had the design initially created, I want to improve it.
Category: Product Design       

l****do6
 [?]
Sign in to view client's details.
| l****do6
|    United States
Fixed Price: Less than $500   |  Posted: Aug 25, 2015  |  Ends: 6d, 11h  |   49 Proposals
I need someone to design a house for me. First I want the exterior and interior render. Will need blueprints later. I want the house to be 3 bedrooms, 2 bathrooms and about 1700 square feet. I need it to have a modern innovative design though. A design that uses the space outside and on top of the house. I want to use luxury designs with affordable materials. I have attached photos with examples. The goal is for the house to cost under $150,000 USD to build. So it needs to be an efficient design with affordable materials.
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

M****030
 [?]
Sign in to view client's details.
| M****030
|    United States
Fixed Price: Not Sure   |  Posted: Aug 25, 2015  |  Ends: 6d, 6h  |   27 Proposals
We're looking a business that will design and sell mens wrist watches. We're looking for a product designer to help us create a design for our first watch. We're looking at sending this design off to our partner factory for production. Ideally, we'd like somebody familiar with the product design process and who is able to come up with something unique and extremely attractive. This will be a continuous role. We are looking to launch with 5 watches, however we would like to first get one designed. Please ensure that your quote is for 1 watch design.
Category: Product Design       

J****991
 [?]
Sign in to view client's details.
| J****991
|    Australia
Hourly Rate: $40 - $50 / hr   |  Duration: 1-2 weeks  |  Posted: Aug 25, 2015  |  Ends: 5d, 23h  |   7 Proposals
Must be CA-licensed. A custom home project, designed in Revit (Architecturals). Project has corresponding engineering plan in AutoCad. Would like to update/revise the engineering plan to reflect the changes that were made to the Architecturals (some of the walls shifted, some posts were moved, etc) There is also a Barn/Garage and connector portion of the project that has been designed but not yet engineered, so would need this done entirely. Goal is to read the structure... exposed timber rafters, outlookers, etc, but to make the hidden portions of the structure and 'lightweight/inexpensive' as possible (minimum number of hold-downs, TJI's instead of LVL's, little to no steel, etc).
Category: Architecture       

b****uer
 [?]
Sign in to view client's details.
| b****uer
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 24, 2015  |  Ends: 5d, 21h  |   42 Proposals
Looking for someone to use for the long term. We need steel shed and similar structures drawn up. We need presentation drawings for clients, drawings for engineers and workshop drawings. Currently have 1 size in our range and looking to greatly expand it and will be constantly adding to it. Having a system where roof sheets, purlins, rafters and brackets are already in there is a plus, so dont have to design each structure individually Prefer if use a program that would link with Solid edge as we use this in house to qualify i will need you to show examples of work you have done using rafters, purlin, roof sheet and bracketry of commercial structures
Category: Product Design       

d****cs1
 [?]
Sign in to view client's details.
| d****cs1
|    Australia
Fixed Price: Not Sure   |  Posted: Aug 24, 2015  |  Ends: 5d, 21h  |   14 Proposals
I need a basic design / diagram of a Smoke Canon project. Similar to the special effect smoke used on a stage. A much more detailed design may be needed later. This project is for a pegmatite installation where the smoke would be dispersed every 20 to 40 seconds all day long. I have a basic idea and some smoke canon information. This is for a presentation to obtain the project. Thank you , Dave O
Category: CAD       
Skills: 3D Modeling, AutoCAD, CAD/AutoCAD       

D****ave
 [?]
Sign in to view client's details.
| D****ave
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 24, 2015  |  Ends: 5d, 18h  |   28 Proposals
We are in need of a quick round of ID concepting for a vapor product that is about to be released. The product is modular, and the components that we will ask you to review will be flat plates. We are looking to add texture and break up the bland look, so you can design with CNC machining and plastic molding in mind. We will need the concepting turned around by the week's end. Our site is cloudmakertech.com - you can find the product images here. Please let me know of any questions.
Category: Product Design       

j****oce
 [?]
Sign in to view client's details.
| j****oce
|    United States
Fixed Price: Not Sure   |  Posted: Aug 24, 2015  |  Ends: 5d, 14h  |   3 Proposals
I am looking for someone with the software and printer capabilities to scale, crop, and print a map of Boston, inclusive of building outlines, to be used as the base for a scale model. The dimensions of the printout should be 36 " X 68" or less. I am flexible on the area of coverage and the scale, though ideally I would prefer something close 1:160 that would include the area captured in the enclosed attachment.
Category: 3D Modelling       

M****ket
 [?]
Sign in to view client's details.
| M****ket
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 23, 2015  |  Ends: 4d, 21h  |   15 Proposals
I have a rough design for a medical garment that i want to design, model, prototype and take into production
Category: Product Design       

e****sio
 [?]
Sign in to view client's details.
| e****sio
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: Aug 23, 2015  |  Ends: 4d, 17h  |   21 Proposals
We are looking for talented architect with experience designing food markets, deli shops, pastry shops, to design our new store, which will be in USA. We are a wholesale greek natural food importer, opening our first retail store, which will be aa showcase of our products, including an extensive greek cheese, wine, and olive oil selection, as well as Greek pies, spreads, yogurt, etc. It is about 250 square meters, and will need thoughtful design including: ergonomics and layout of refrigeration, workspaces, sinks, etc. design of shelving, furniture color and lighting selection you will deliver 3d renderings during the design process to assist in the design process, and also floor plans, and construction plans. You must be able to work in both US Inches/feet, and also Metric system. The refrigeration equipment will be custom made to your specifications in greece, as will the woodwork/shelving. We prefer designers, architects in Greece, but are open to everyone. Must have a...
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

e****gin
 [?]
Sign in to view client's details.
| e****gin
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job