Save this Search
     
Sort by:
  • Posted Date
Fixed Price: Less than $500   |  Posted: 1h, 13m ago  |  Ends: 14d, 22h  |   0 Proposals
This posting is for BCIN stamping on a design for a garage. I need the stamps on a garage design for permits. I am attaching the drawings for your review. We need to flip the roof to be supported on the two side walls instead of the back and the front (as in the design). I can provide the existing CAD design for your review.
Category: Architecture       
Skills: 3D, 3D Modeling, Architecture, AutoCAD       
Preferred Location: Canada

z****idh
 [?]
Sign in to view client's details.
| z****idh
|    Canada
Fixed Price: $50 or less   |  Posted: 1h, 25m ago  |  Ends: 14d, 22h  |   2 Proposals
looking to have a CAD file made for a display cabinet. I have all of the sizes, reference pictures etc. will be a very basic job. must be a fixed price. would also need pdf files of the CAD design. will be made from 19mm MDF or chipboard, will be hung on a wall as display. the door must have rebate routed for the glass insert. adjustable holes down sides for glass shelf adjustment hinged front display door. door is slightly bigger than cabinet to hide the carcass. see pics. 900mm wide 1200mm high 100mm deep would like to be exactly same design as the pictures attached
Category: Product Design       

b****mer
 [?]
Sign in to view client's details.
| b****mer
|    Australia
Fixed Price: Less than $500   |  Posted: 2h, 8m ago  |  Closed  |   0 Proposals
I am looking for a fashion designer/graphic designer to make a rendering of a book bag. I want the bag to be modern, sleek, but traditional. Eventually I would like to prototype the bag.
Category: Product Design       
Skills: Fashion Design, 3D Modeling, 3D Design       

m****th5
 [?]
Sign in to view client's details.
| m****th5
|    United States
Fixed Price: Less than $500   |  Posted: 4h, 25m ago  |  Ends: 14d, 19h  |   3 Proposals
Hi It's an international NGO and a building for orphanage. The modleing is ready and we require a walk through for the below spaces: Basement floor: communal Canteen, Kitchen, and Laundry facilities Floor 1: Admin Office, 3 Classrooms, Prayer area and Bathroom Floor 2: 4 flats each containing 4 bedrooms and a shared bathroom We will need both construction stage and completion similar to the below link   [obscured]  /watch?v=2MeZoB76L8A Please let me know the time frame and quote along with any sample of your similar projects. Thanks
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD, 3D Rendering       

s****e13
 [?]
Sign in to view client's details.
| s****e13
|    United States
Fixed Price: Not Sure   |  Posted: 5h, 35m ago  |  Ends: 14d, 18h  |   4 Proposals
I'm looking for a talented industrial designer to develop one design concept and then two ABS plastic enclosures from the concept for devices being manufactured by my company. The enclosures, designed for home use (not industrial), will be used to house electronic sensors and actuators so the design needs to take into account a range of environmental and usage requirements. The theme is the "internet of things" where sensors and actuators are connected together and gather information that is used for some commercial benefit, typically cost savings. The IoT product enclosures you design for me are scheduled to be launched later this year. They will be battery powered, wireless and targeted at consumer markets. As part of this contract, want you to: - workshop the enclosure requirements with me and propose concepts - from the requirements, design two enclosures - produce 3D models and animations for the enclosures Product ideas that I like - The Sony PS4 power/activity li...
Category: Product Design       

T****ema
 [?]
Sign in to view client's details.
| T****ema
|    Australia
Fixed Price: Less than $500   |  Posted: 7h, 40m ago  |  Ends: 2d, 16h  |   4 Proposals
I have one bass bait (see attachment - mine will be similar to the top sweet beaver bait) that I need 3d laser scanned. Of course, I will have to send you some samples. Then, I need you to convert the scan into a 3d model and provide me either step or iges files. I plan to source job right away, but of course I will need to send you the bait samples to work with. This could also lead into having you do a mold design. Thanks - looking forward to reviewing your proposals. Brent Robbins Lunker Mania Baits, LLC Michigan - USA
Category: 3D Modelling       
Skills: 3D, 3D Scanning, 3D Design       

Y****haa
 [?]
Sign in to view client's details.
| Y****haa
|    United States
Fixed Price: $20 - $35   |  Posted: 8h, 18m ago  |  Ends: 14d, 15h  |   4 Proposals
This is a small 16x24 cabin. Please see my drawing. Keep in mind this needs to be designed with little waste. There are no internal walls except the bathroom. This is a super easy layout with a loft upstairs. Using a 8:12 pitch roof. This will have a wood stove. The windows upstairs are all 48x48. The downstairs will have 36x36 windows and a 24x24 window in the bathroom. All windows are sliding windows. There is a washer/dryer under the stairs. There is no HVAC and the water heater will also be under the stairs. I need a floor plan, elevation plan, roof plan, electrical plan. We also need a foundation plan to show the 12" depth perimeter footers and 8" CMU block. This will be on a standard crawlspace. I will accept the best offer for the job but please only bid if you can get this done in next 24 hours. ************Only need a PDF as I will print the drawings locally. Please note I do not respond to bids over the budget amount********
Category: CAD       
Skills: 3D Modeling, Architecture, AutoCAD       

I****ols
 [?]
Sign in to view client's details.
| I****ols
|    United States
Fixed Price: Less than $500   |  Posted: 17h, 9m ago  |  Closed  |   4 Proposals
I need a solid threaded rod that will fit into a 1/2" standard metal pipe flange. after the 1.5" thread will be 3" x 1/8" stop disk followed by a 4" solid .7525" rod. Need .stl file to be used to print part on 3d makerbot replicator 2 Please see attached diagram.
Category: CAD       

s****ell
 [?]
Sign in to view client's details.
| s****ell
|    United States
Fixed Price: $250 - $25,000   |  Posted: Mar 28, 2015  |  Ends: 13d, 21h  |   37 Proposals
We are a fast growing company that is looking to establish a working relationship with someone who we can source our design work to. We do the concepts and the design and send you what we want. It is your job to take the notes, sketches, initial Revit layout and finish out all of the changes and details.
Category: CAD       
Skills: 3D Modeling, AutoCAD, AutoDesk Revit, CAD/AutoCAD       

M****use
 [?]
Sign in to view client's details.
| M****use
Fixed Price: Less than $500   |  Posted: Mar 28, 2015  |  Ends: 13d, 18h  |   15 Proposals
I need someone helping me finishing a concept for a small product (in the area of Bottles and Beverages). The concept still lacks on the mechanical aspects and it needs to be completed, that means a document and drawings have to be made in order to be ready to apply for a patent. Signing of a NDA is required. Its only the first step for more jobs. Overview: - First signing of NDA required - Development/Continuing of a concept especially the mechanical aspects - CAD and Document for patent application So i hope to find a good partner for more than just this job.
Category: CAD       

m****asi
 [?]
Sign in to view client's details.
| m****asi
|    Germany
Fixed Price: Less than $500   |  Posted: Mar 28, 2015  |  Ends: 13d, 17h  |   9 Proposals
Hi I require some concept drawing idea for a planning hull trailer able house boat. I want to be able to easily live in it if it is on to water or at a campsite. I had some plans but they are a little to 1960's and the other plans I have are a little to modern so a look somewhere in the middle. requirements - no wider that 2.4m no longer that 7m - room for lots solar panels - planning hull with 90hp on back - aerodynamic for towing on trailer - room for 3.3m dinghy and 15hp outboard on roof (for transit) and docking tie up at rear (when in water) - covered deck area Keywords boat marine design 3d navel naval ship
Category: Product Design       

a****iwi
 [?]
Sign in to view client's details.
| a****iwi
|    New Zealand
Fixed Price: About $50   |  Posted: Mar 28, 2015  |  Ends: 13d, 16h  |   1 Proposal
Hello, I'm remodeling my bathroom, and I would like to buy tiles. If I provide a license number for an Architect/ Contractor/ Interior designer i will get a discounted rate. If compensate you $50 if you will let me use your number and name.
Category: Architecture       
Preferred Location: United States

f****ion
 [?]
Sign in to view client's details.
| f****ion
|    United States
Fixed Price: Not Sure   |  Posted: Mar 28, 2015  |  Ends: 13d, 15h  |   21 Proposals
Build an attractive and easy to manufacture electronics enclosure to be used in a next generation wi-fi connected IoT device. Approximate dimensions of the enclosure is 180 mm x 180 mm x 70mm. The enclosure will be wall mounted with an attractive snap cover. The base houses a PCB and Terminal Block(s). The cover should house status LEDs. There may be an ON/OFF switch as well (TBD) Attractive design and easy manufacturability is a must.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks, 3D Design       

p****ara
 [?]
Sign in to view client's details.
| p****ara
|    United States
Fixed Price: Less than $500   |  Posted: Mar 28, 2015  |  Ends: 13d, 14h  |   12 Proposals
Helllo, We are looking for a 3D/artist to finish our architectural renderings and join our visualising team. You need to have excellent knowledge of Photoshop. Please provide a selection of your images (before/after) from your portfolio, demonstrating your visual skills. So give me a quote with a portfolio and write the word purple, so that I know that you understand the brief.
Category: 3D Modelling       

d****ee7
 [?]
Sign in to view client's details.
| d****ee7
|    Slovenia
Fixed Price: Less than $500   |  Posted: Mar 28, 2015  |  Ends: 13d, 13h  |   26 Proposals
Helllo, We are looking for a 3D architectural visualiser to join our visualising and animation team. You need to have excellent knowledge of 3DS Max and V-Ray. We have about 5 projects by which the models are already done in .dwg and 3ds max. For this project we will need exterior renderings for one family houses. I have given an example in the attached files. Please provide a selection of your images from your portfolio, demonstrating your visual skills with exterior visualisation. So give me a quote with a portfolio and write the word purple, so that I know that you understand the brief.
Category: 3D Modelling       

d****ee7
 [?]
Sign in to view client's details.
| d****ee7
|    Slovenia
Fixed Price: Less than $500   |  Posted: Mar 28, 2015  |  Ends: 13d, 11h  |   16 Proposals
I plan to manufacture photo booths and would like some fabrication drawings done so I can have people quote on the construction of the booths. I have pictures of booths we would like to model and dimensions of structure etc
Category: Product Design       

G****ell
 [?]
Sign in to view client's details.
| G****ell
|    Singapore
Fixed Price: Not Sure   |  Posted: Mar 28, 2015  |  Ends: 13d, 5h  |   12 Proposals
I have a patent on a CEILING FAN product I created some years ago. I want to create a sleek, more refined prototype proving the concept. This is the Abstract of the Patent: A fan blade assembly having both an electrical connection and a mechanical connection to a rotating hub. The assembly is configured so that a single installation motion creates the mechanical connection and the electrical connection. The electrical connection preferably includes multiple independent conductor paths. You can find a link to the patent here:   [obscured]  /patents/US20110085908 The project is for the design/prototyping of a fully working ceiling fan with detachable electrical/mechanical blades with LED embedded.
Category: Product Design       

P****lly
 [?]
Sign in to view client's details.
| P****lly
|    United States
Fixed Price: Less than $500   |  Posted: Mar 27, 2015  |  Ends: 5d, 3h  |   14 Proposals
I have a 3D model designed in Rhino3D need to develop the same file in Revit to create Sections, elevations and site plan.
Category: Architecture       

s****_ma
 [?]
Sign in to view client's details.
| s****_ma
|    United States
Fixed Price: Less than $500   |  Posted: Mar 27, 2015  |  Closed  |   30 Proposals
Turn a drawing of a credit card shaped design with some cutouts into a 3d object I can 3d print. Similar but much much simpler than the "silo mesh card"
Category: 3D Modelling       
Skills: 3D, 3D Modeling, 3D Printing, 3D Design, 3D Rendering       

M****pps
 [?]
Sign in to view client's details.
| M****pps
|    Australia
Fixed Price: $1,000 - $5,000   |  Posted: Mar 27, 2015  |  Ends: 13d, 0h  |   13 Proposals
looking for someone who is 1- Right minded 2- Innovative 3- Industrial Kitchen Background 4- Expert on maximising space efficiency 5- will go the extra mile this project will be built in a private residential land 29.5 sq m x 27 sq m it will provide the following services: 1- Smart Central Kitchen (Private Dining/Outdoor Catering) 2- Cooking Courses 3- Restaurant Start-Up incubator 4- Food Styling & Tv show production Task: 1- Concept Development. 2- Full layout 2- lighting Design 3- Elevations. including all measurements and design elements 4- 3D Views please check the attachments for more details
Category: Architecture       

c****ann
 [?]
Sign in to view client's details.
| c****ann
|    United Kingdom
Fixed Price: Less than $500   |  Posted: Mar 27, 2015  |  Closed  |   15 Proposals
Hello all, I need a drawing or two for my provisional patent on a new product (cup lid). I have sketches and drawings but I need to make sure it functions like I think it will. I will fill in the blanks once we have had a chance to speak and have a signed NDA in place. Thanks
Category: Product Design       
Skills: 3D Modeling, SolidWorks       
Preferred Location: United States

s****t67
 [?]
Sign in to view client's details.
| s****t67
|    United States
Fixed Price: $100 - $200   |  Posted: Mar 27, 2015  |  Ends: 12d, 21h  |   11 Proposals
I will like a design with solidworks a ventilation radiator that has cylindrical fins with inlet and outlet, and run CFD on it. i am looking for someone experienced with solidworks. any questions please ask
Category: CAD       
Skills: ANSYS, SolidWorks       

p****042
 [?]
Sign in to view client's details.
| p****042
|    United Kingdom
Fixed Price: $100 or less   |  Posted: Mar 27, 2015  |  Ends: 12d, 20h  |   16 Proposals
we have a little side project that we wanted to bring to life, we have the idea and a rough sketch but need someone to help design it. Its not a large project and it is very simple.
Category: Product Design       

a****xon
 [?]
Sign in to view client's details.
| a****xon
|    United States
Fixed Price: Less than $500   |  Posted: Mar 27, 2015  |  Ends: 12d, 19h  |   51 Proposals
We have two floorplans which were hand drawn. They must be converted to a better looking pdf or jpeg file so they can be embedded into a marketing flyer. We have an additional 4 floorplans to be converted for the same property
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

M****ANI
 [?]
Sign in to view client's details.
| M****ANI
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job