Save this Search
     

All Jobs3d Modelling

 (485 results)  
Sort by:
  • Posted Date
Results for '3d Modelling'
Fixed Price: Not Sure   |  Posted: 14h, 26m ago  |  Ends: 29d, 9h  |   1 Proposal
We, request a specialist freelancer for developing and providing source code for a special software, as briefly defined below; - High Quality 3D GIS Data show for EG. - The GIS Mapping shall include Aeronautical data of EG including (airways, aerodromes, navigation aids, Approach Procedures, etc...) - Fast Time Simulation of Air Traffic, according to the retrieved Flight Data Records, Airways & Approach Procedures Data. - Edit Navigation Map (airways, way points, runway layout, etc) to be simulated in the fast time simulation in order to providing the following Reports; - Air Traffic Control Sector workload calculations (based on given formula) - Air Space Complexity reports (based on given formula) - Airspace Safety Reports (based on ICAO Manual) - Aircraft Noise Contour Mapping surrounding airport (by noise database utilization) - Aircraft Engine Emission Contour Mapping (using engine emission model) - Cost & Benefit Calculations. - Printing High Quality Navigation Charts....
Category: Software Application       

a****awe
 [?]
Sign in to view client's details.
| a****awe
|    Egypt
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 15h, 3m ago  |  Ends: 14d, 8h  |   19 Proposals
Hello, I need a 3D concept model in SolidWorks. I will provide clear sketches of what I need. If interested, can you please fill out and sign the NDA and we can discuss the project. Thanks, Nate
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

n****rom
 [?]
Sign in to view client's details.
| n****rom
|    United States
Fixed Price: Not Sure   |  Posted: 15h, 16m ago  |  Ends: 14d, 8h  |   2 Proposals
I have 2 locations, 1 in Champaign IL and 1 in Plainfield IN, approximately 1 acre each ( Champaign lot is little more than 1 acre) . Both locations are excellent corner, commercial lots. Need someone to work on civil engineering and architectural drawings including mechanical drawings and apply for the permissions with the county and state. for small strip mall Ideal person to work on this will be licensed in both Indiana and Illinois.
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       
Preferred Location: United States

h****003
 [?]
Sign in to view client's details.
| h****003
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 15h, 53m ago  |  Ends: 14d, 8h  |   8 Proposals
The product I designed is one that I have been tossing back and forth for a while. about 3 months ago I downloaded Autodesk123d and started learning how to use it. I have (hopefully) a pretty detailed design of my product and I am now looking for an engineer to help me out with certain aspects of the product. A few things about the product. 1). The product is small, 12" x 1" on most of the parts. There are not a lot of intricate parts with this design. 2). the product must be able to manufactured via plastic mold injection. minimal to no CNC milling is desired. The product is for a hobby of mine and has the potential to have other pieces designed in the future. Thanks for looking!
Category: CAD       
Preferred Location: North America

a****es2
 [?]
Sign in to view client's details.
| a****es2
|    United States
Fixed Price: Less than $500   |  Posted: 16h, 4m ago  |  Ends: 14d, 7h  |   6 Proposals
I need game ready but of good or high quality textures for already made dinosaur models. I have a total of around 7 models that need to be textured I'm willing to pay about $175 for all 7
Category: Graphic Design       
Skills: Texture Artist, 3D Design       

e****222
 [?]
Sign in to view client's details.
| e****222
|    United States
Fixed Price: Less than $500   |  Posted: 16h, 51m ago  |  Ends: 14d, 7h  |   2 Proposals
I have a rendering that I want edited. I also want to see the board from a 45 degree angle so we can see the detail on the side of the frame. I've attached the original rendering and I've attached some images of the "rope" border. This board is made from a solid piece of 1 inch thick wood. The brass plaques with black lettering and the acrylic picture holders sit in recesses so that they are flush with the board. These are the three changes I want to make to the original image. 1. Please make the magnets (the small silver dots inside the acrylic photo holders) brass so they're the same color as the plaques and rope border 2. Fill in the following info for the plaques: - 1. Commander-In-Chief -2. Secretary of Defense -3. Secretary of the Navy -4. Chief of Naval Operations -5. Chief of Naval Personnel -6. Commander, Navy Recruiting Command -7. Commodore -8. Commanding Officer -9. Executive Officer 3. I've attached images of the rope pattern we will use for ...
Category: Graphic Design       
Skills: Graphic Design, 3D Modeling, 3D Design, 2D Design       

s****man
 [?]
Sign in to view client's details.
| s****man
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 17h, 6m ago  |  Ends: 14d, 6h  |   7 Proposals
Structural models and details, Architectural .pr. and details,shopdrawings, shopdrwgs control and coordination.... AutoCad and Rhinoceros..
Category: Civil & Structural       

c****siz
 [?]
Sign in to view client's details.
| c****siz
|    Turkey
Fixed Price: Less than $500   |  Posted: 17h, 26m ago  |  Ends: 14d, 6h  |   5 Proposals
We need guys who have experience in preparing the joinery shop drawings from the given elevation of furnitures, mdf wall cladding, glass cladding etc to submit to building consultants. A sample drawing is attached. you need to prepare the drawings independently. No sketches would be there showing the spot details and cross sections.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

g****mar
 [?]
Sign in to view client's details.
| g****mar
|    India
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 17h, 29m ago  |  Ends: 14d, 6h  |   2 Proposals
PMC is currently seeking a talented Steel Designer who works well in a fast-paced, schedule-driven, collaborative environment. The Steel Designer is primarily responsible for designing systems that support equipment used in manufacturing and industrial facilities... conveyors, assist tool devices, platforms, screen guards, and ladders/stairs for automotive assembly plants or power plants, for example. He or she may also be responsible for field checking existing conditions to ensure a proper fit with the support structures. The Steel Designer will use AutoCAD and/or 3D modeling software to create drawing plans and sections that accurately depict the arrangement of the structure, and will create detailed fabrication drawings to be used in the fabrication of various steel components. Requirements include: Previous experience in AutoCAD and general drafting ability Ability to read design drawings Experience in construction industry Strong communication skills Experience in 3D Modeling,...
Category: Design Project Management       
Skills: 3D, 3D Modeling, 3D Design, 3D Rendering, 2D Design       

P****126
 [?]
Sign in to view client's details.
| P****126
|    United States
Fixed Price: $70 - $110   |  Posted: 17h, 32m ago  |  Ends: 6d, 6h  |   3 Proposals
Preliminary requirements We require assistance of an experienced modeler/rigger/animator to make minor changes to the existing 3D model of a human character and rig it for use in Unity's animation system (Mecanim). This is a hero character that will be displayed close up most of the time, so it is important to have very carefully tuned weights in critical joints so that no unnatural deformations are observed. We expect quality of work to be on par with this example (which also illustrates style of the model and special rigging requirements)   [obscured]  /watch?v=K1eKpR8A99A (DOA Extreme 2 - source of attached screenshot). As a way to demonstrate proper rigging, creation of few simple animations will also be required. Those animations must be playable in Unity/Mecanim without any unnatural distortions (i.e. fixing joint problems with Max-specific plugins and tools is not an option - it must work with Unity biped, with retargeting, in real time, on a mobile device). Model ...
Category: Animation       
Skills: 3ds Max, 3D Modeling, 3d Animation, Unity, 3D Rigging       

e****rim
 [?]
Sign in to view client's details.
| e****rim
|    Poland
Hourly Rate: $15 - $20 / hr   |  Duration: 7-9 months  |  Posted: 17h, 41m ago  |  Ends: 14d, 6h  |   0 Proposals
3d designer in a architectural designing company with upscale projects including hotels restaurants boats yachts etc
Category: Other - Design       

A****on1
 [?]
Sign in to view client's details.
| A****on1
|    Greece
Hourly Rate: $10 - $15 / hr   |  Duration: 1-2 weeks  |  Posted: 18h, 44m ago  |  Ends: 14d, 5h  |   9 Proposals
I am looking to have files created for the 3d printing of a jewelry bracelet band. The end result of this bracelet will be used to weave rope through and dangle charms from using jump rings. The design should resemble woven rattan wicker weave with a new age smooth design finish.(all blend into each other). Can be an all 1 pc. band with holes and beveling, for a raised look. This bracelet base will be printed from a flexible nylon material, and will need some sort of end closure system; after the ropes are woven through the nylon base bracelet.
Category: 3D Modelling       

s****x91
 [?]
Sign in to view client's details.
| s****x91
|    United States
Fixed Price: $55 or less   |  Posted: 20h, 47m ago  |  Ends: 14d, 3h  |   1 Proposal
I have a Maya rig of a man that needs to be finished. The body rig is already in place and skinned, it just needs corrective blend shapes in some areas (like the shoulders) and a face rig. The character has good topology for rigging and deforms well. I've attached a JPG so you can see him. Here's the details of what I need: _Corrective Blend Shapes_ Corrective blend shapes on the shoulders/chest (for when the arms are raised up or swung backwards/forwards), torso X-rotations, head/neck, wrist, elbows (make it so the bicep flexes when the arm bends), and head squash/stretch controls (already on the rig and skinned). _Face Rig_ I'm a 3D animator, so I'm familiar with some very good face rigs. Rather than explain every single thing that's in a good face rig, I'd say that for this project something similar to the free Malcolm character's face rig would be perfect. If you've never seen the Malcolm rig from AnimSchool, please check it out to better understand what I'm looking for (again, ...
Category: Animation       
Skills: 3D, Animation, Maya, 3D Design, 3D Rigging       

S****naW
 [?]
Sign in to view client's details.
| S****naW
|    United States
Fixed Price: Not Sure   |  Posted: 21h, 41m ago  |  Ends: 14d, 2h  |   3 Proposals
We are preparing to produce cottages that are powered by the sun: the roof actually consists of a new category of aesthetically pleasant solar panels. The cottages are to be used as guesthouses or sauna's - both in the same form factor. I look for an association with a very good ME who understands (in particular) extrusion mold design and die cast mold design. The perfect candidate would also be able to perform strength calculations - that may be required for physical planning approvals. We are a start-up with limited resources until we proof our point (build the prototypes - and we will do that during the next 6 months- . The concept is really strong - each cottage generates 1.8 kW of electricity and the additional cost over traditional building material is really small. When we find the right candidate -and as we are looking for a long term relationship- stock options are definitely an option.
Category: Product Design       

a****lus
 [?]
Sign in to view client's details.
| a****lus
|    Netherlands
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: 22h, 4m ago  |  Ends: 14d, 1h  |   3 Proposals
Good day Toshe I hope you are well. I have conceived of a product relating to women's shoes. I believe that although it is a women's shoe product that the realities and skills of construction will be best suited to developing this product. The elements are: a) Front view of the product b) Back and bottom view of the product I need your help mainly on b, but look forward to discussing ideas with you around a) as well. I have contacted a company in China who requires 3D images of the product and as I know very little about product development and what "good" should look like, so would require your help in educating me and giving me the very best options around the shoe accessory. Please let me know ASAP if you would be interested in this project? Kind regards Sidonia Michoux Tooshoos Ltd UK
Category: 3D Modelling       
Skills: 3D       

T****oos
 [?]
Sign in to view client's details.
| T****oos
|    United Kingdom
Fixed Price: $500 - $1,000   |  Posted: 22h, 19m ago  |  Ends: 14d, 1h  |   10 Proposals
I want to manufacture a new archetype for a clock, where it is a 24 hour clock that rotates. So I would like the whole clock assembled 3d printed with the mechanics and electronics inside.
Category: 3D Modelling       

a****oit
 [?]
Sign in to view client's details.
| a****oit
|    United Kingdom
Hourly Rate: $40 - $50 / hr   |  Duration: Not Sure  |  Posted: 22h, 36m ago  |  Ends: 14d, 1h  |   44 Proposals
I have various product images on my website that i would like to be remade via 3D rendering to the highest quality possible. I am also in need for the bathroom setting to be designed and made for these images, I am looking for the best quality and fast work also, i understand that 3D design takes time so i don't expect in hours for one product. Who ever is chosen will be tested with one image to redesign and make, this Job will also open the door to work full time for this company if the person chosen would like to ad be the chief of design for the website.
Category: Graphic Design       

l****ors
 [?]
Sign in to view client's details.
| l****ors
|    United Kingdom
Hourly Rate: $15 - $20 / hr   |  Duration: Not Sure  |  Posted: 23h, 6m ago  |  Ends: 14d, 0h  |   5 Proposals
What I have in mind is a eyelashe holder in the form of a wristlet. It needs to form snug around wrist but still adjustable with open compartment with flat surface. I need a design drawn up as well as a prototype made.
Category: Product Design       

D****a04
 [?]
Sign in to view client's details.
| D****a04
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 23h, 12m ago  |  Ends: 14d, 0h  |   3 Proposals
Hello, We may have a need to convert MRI files in the Dicom file format to STL files suitable for 3D Printing. The STL files must be highly detailed and anatomical accuracy is a must. If you can do this type of file transfer please advise. Let us know what software you you be using and if you have any medical experience. Thank you, Jack
Category: Other - Design       
Skills: 3D, 3D Modeling, 3D Design, 3D Rendering       

J****3DS
 [?]
Sign in to view client's details.
| J****3DS
|    United States
Fixed Price: $20 - $50   |  Posted: 23h, 26m ago  |  Ends: 14d, 0h  |   11 Proposals
Renderer required to create photorealistic images of my selfie stick. High quality/effects and resolution for Amazon listing. 3d basic model already available in 3D MAX 2015/2013. Looking forward for great service.   [obscured]  /sh/sg5px693mlm013i/AACKKeQfVl_RuKigyrlyXGBza?dl=0   [obscured]  /sh/n96c90uk1036p4k/AAAmA_ltiSuofoVqc-9yuw-ca?dl=0 Best wishes, Karan Jesrani
Category: Graphic Design       
Skills: 3D Modeling, 3D Design, 3D Rendering       

k****ani
 [?]
Sign in to view client's details.
| k****ani
|    Oman
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 27, 2015  |  Ends: 13d, 23h  |   14 Proposals
3d model of ceramic product in shape of animals is required on an urgent basis. Final deliverable to be in .3ds or any format importable in Rhino 5.0. I have 5 products to be modelled, we will start with one, if satisfied remaining four will be shared. Please share quotes and timelines accordingly. The project needs to be completed within couple of days. Nurbs format will be preferred over mesh,
Category: Other - Multimedia...       
Skills: 3D, 3ds Max, 3D Design, 3D Rendering, RhinoScript       

s****pta
 [?]
Sign in to view client's details.
| s****pta
|    India
Fixed Price: Less than $500   |  Posted: Apr 27, 2015  |  Ends: 13d, 22h  |   13 Proposals
I need to transform a .DWG AutoCAD file into a 3D .STL file. I need it for a 4" wide coaster I want to use for 3D printing. Project Stage: I have a 2D design
Category: Graphic Design       
Skills: 3D Modeling, 3D Design, 3D Rendering, 2D Design       

d****per
 [?]
Sign in to view client's details.
| d****per
|    United States
Fixed Price: Not Sure   |  Posted: Apr 27, 2015  |  Ends: 1d, 22h  |   7 Proposals
I need a model in .3dm file format of the ring as well as a .stl for printing purposes. I will supply all the gem dimensions and finger size. This is a URGENT job and would like to know when it could be ready.
Category: 3D Modelling       

F****mba
 [?]
Sign in to view client's details.
| F****mba
|    South Africa
Fixed Price: Not Sure   |  Posted: Apr 27, 2015  |  Ends: 13d, 20h  |   13 Proposals
We are a reputed trading company in the Middle East. We are currently looking out for a designer who are design the following for us: - Rice bags - Gift packaging for 1/2/5 Kg rice bags - 2D/3D designs
Category: Label & Package Design       
Skills: Adobe Photoshop, 3D Modeling, 3D Design       

r****wal
 [?]
Sign in to view client's details.
| r****wal
|    United Arab Emirates
Fixed Price: $500 - $1,000   |  Posted: Apr 27, 2015  |  Ends: 13d, 16h  |   13 Proposals
Hello, I am looking for a jewelry designer that specializes in pearl engagement rings. I have three different ring ideas that I would like to combine into one or at least pull inspiration from each one. I am open to suggestions, but I'm kind of going for a specific look. I look forward to hearing proposals.
Category: Other - Design       

s****sle
 [?]
Sign in to view client's details.
| s****sle
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job