Save this Search
     

All Jobs3d cad

 (194 results)  
Sort by:
  • Posted Date
Results for '3d cad'
Fixed Price: $20 - $50   |  Posted: 1h, 47m ago  |  Ends: 14d, 22h  |   2 Proposals
I'm looking to make an image of 4 CAD images. The size of the images is 6' by 9.5'. I've also provide images of idea .
Category: Illustration       
Skills: 3D, 3D Design       

T****ngh
 [?]
Sign in to view client's details.
| T****ngh
|    India
Hourly Rate: $20 - $30 / hr   |  Duration: 1-2 weeks  |  Posted: 4h, 56m ago  |  Ends: 14d, 19h  |   2 Proposals
There is a proposal to build a 'minor' telecommunications utility on top of a building directly in front of/down hill from three homes with views of a lake. We would like to understand what the proposed construction of the utility will do to the views of these homes and to passersby (it's on a public path). Much of the drawings of the building and one of the homes have been documented by the firm building the facility but they obviously don't include view obstruction
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

m****ber
 [?]
Sign in to view client's details.
| m****ber
|    United States
Fixed Price: Not Sure   |  Posted: 9h, 18m ago  |  Ends: 14d, 14h  |   17 Proposals
Ferroform - RFQ 3D Modelling Introduction: Our business is metal castings. We require 2D drawings to be drawn up quickly onto 3D CAD in order to get volume of the part for costing purposes. Your output is a 3d part file & a volume. Note: This model is not for production, time spent must be reduced to minimum, discretion to be used on what details to omit in order to save design billing time but still arrive at an accurate volume. Other services required: 1. Remove end users name from 2D drawings so we can send for other costings without exposing who our end customer is. 2. Redraw parts from supplied sketches to full production drawings. Review & cost below: Find attached 2 drawings and advise a cost. Your output is a 3d part file & a volume. Bear in mind time is of the essence, this is not for production, it is to assist in our costings. So time costly details to draw (fillets, radii etc) must be omitted at your discretion to save drawing time, but bearing in mind eve...
Category: 3D Modelling       

m****nn1
 [?]
Sign in to view client's details.
| m****nn1
|    South Africa
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 10h, 15m ago  |  Ends: 14d, 13h  |   15 Proposals
We have 3d printers that print cast-able jewelry molds which are directly cast able . We need a designer who could design jewelry parts using matrix or rhino or any other software but should be able to design complex designs too.
Category: Other - Multimedia...       

i****s3d
 [?]
Sign in to view client's details.
| i****s3d
|    United Arab Emirates
Hourly Rate: $15 - $20 / hr   |  Duration: 3-4 weeks  |  Posted: 17h, 40m ago  |  Ends: 14d, 6h  |   22 Proposals
We have a 3D steel model done and we require a skillful draftsman to produce structural workshop drawings extracting all individual component from the 3D model and put them into many A1 size drawings with label of different views, quantity, dimension, materials lists and etc for me to supply it to the steel fabricator for fabrication purposes. Experience in steel profile of a single curve tri-cord trusses with web in between is preferred Please state experience. Preferable in engineering, civil and steel and structural drafting work. Time frame: 3-5 days with 8 hours a day. Please quote best price.
Category: CAD       
Skills: 3D Modeling, AutoCAD       

b****gow
 [?]
Sign in to view client's details.
| b****gow
|    Malaysia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 20h, 51m ago  |  Ends: 14d, 3h  |   30 Proposals
I have drawings started of three exterior elevations of an existing residence and scanned elevations of a proposed residence next door. The drawings are in AutoCAD .dwg format, and need some adjustments using sketches and dimensions that I will provide. The existing residence is drawn in outline on each elevation, and that outline may need to change in shape or dimension on the elevations. The scanned images may need to be edited slightly in order to best demonstrate the relationship between the two buildings. No site visits, no details, no 3D rendering necessary. Consideration will be given based upon proposed price and completion time. Some specifics: - No annotation is necessary, but dimensions must match those shown on .pdf plans, and building elements must align in plan. - I have rough sketches and dimensions that I will provide. These will be used by the drafter to edit the outline of the existing residence as needed. - I will share files with the winning contractor using...
Category: CAD       
Skills: 3D Modeling, AutoCAD, CAD/AutoCAD       

Z****922
 [?]
Sign in to view client's details.
| Z****922
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 22h, 19m ago  |  Ends: 14d, 1h  |   4 Proposals
Plastic piece for a toy. It's a simple plastic piece maybe a stencil piece, maybe a 3d I I need it put into a file.3d file.
Category: Design Project Management       
Skills: AccountMate, ACPI, 3D Design, 3D Rendering, ACID Pro       

J****ey3
 [?]
Sign in to view client's details.
| J****ey3
|    United States
Hourly Rate: $30 - $40 / hr   |  Duration: Not Sure  |  Posted: 22h, 50m ago  |  Ends: 14d, 1h  |   55 Proposals
Need 3D design of an 8 port plastic air connector from customers hand drawing concept. Some pictures are available.
Category: Mechanical       

i****dge
 [?]
Sign in to view client's details.
| i****dge
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 23h, 35m ago  |  Ends: 14d, 0h  |   11 Proposals
PLEASE READ THE ENTIRE LISTING FOR CONSIDERATION Looking for someone with significant Civil Engineering experience. PE license not necessary but the ability to take a project from concept to completion with minimal instruction/supervision is a huge plus. Familiarity with drainage reports and stormwater also a plus. The ideal candidate has their own licensed version of Civil 3D. Must be able to get work done quickly and follow CAD standards. If you do not have significant experience using CAD on construction projects in the Civil field, please do not apply. PLEASE ONLY APPLY IF YOU HAVE CIVIL ENGINEERING EXPERIENCE. I am not interested in architectural, structural, or mechanical work. You must have experience with Civil Design and Engineering and be able to show projects you have done.
Category: Civil & Structural       

p****ton
 [?]
Sign in to view client's details.
| p****ton
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 23h, 47m ago  |  Ends: 14d, 0h  |   10 Proposals
We are looking for an experienced Rhino/Matrix specialist to develop CADs of jewellery pieces for a start up company.
Category: Graphic Design       
Preferred Location: Western Europe

a****ukc
 [?]
Sign in to view client's details.
| a****ukc
|    United Kingdom
Fixed Price: Not Sure   |  Posted: Mar 30, 2015  |  Ends: 13d, 21h  |   19 Proposals
Hi, We need a professional 3D designer who has extensive experience in designing jewelry to work with us on creating new pendant designs and files to send to the manufacturer for production. You will be required to sign a NDA form. All files and designs created will be sent to us via email (or other) as projects are completed. Our line of jewelry is made of pewter or stainless steel. The pendants are similar to lockets so you must have experience in designing pendants that open up to show the inside and holes or cut-outs which may be in the front and back of the pendant. Important: We want someone who has experience and can give us their suggestions as well as take our ideas/pictures and turn it into something unique on their own. This project is for the first pendant design. If we are satisfied with the work, we will have several more designs to follow. Thank you and looking forward to working with the winning bidder! Chris
Category: CAD       
Skills: 3D Modeling, AutoCAD, Rhinoceros 3D, SolidWorks       

i****rks
 [?]
Sign in to view client's details.
| i****rks
|    United States
Fixed Price: $40 - $100   |  Posted: Mar 30, 2015  |  Ends: 13d, 20h  |   9 Proposals
Project for Company specializing in product designs for small unmanned aircraft. Basic Hire Qualifications Work is done as an independent contractor Must sign a non-disclosure agreement Must sign a contract related to the specifications of the contract Minimum of a bachelors degree in Engineering or 3D design Minimum of one year experience with developing projects using CAD or other compatible software. Highly proficient in working on deadlines, is reliable, dependable and can meet the demands of highly skilled projects. Project involves: Developing a 3D design for a tethering cord for a small unmanned aircraft. Qualifications: Understands the project requirements and develops high quality designs. Develops design layouts for this project using 3D software Uses creativity and originality to develop a unique product Develops primary sketches and models for final selection of product design Selects appropriate materials, engineering standards and parts for project. Presents designs...
Category: Product Design       

d****ARS
 [?]
Sign in to view client's details.
| d****ARS
|    United States
Fixed Price: Not Sure   |  Posted: Mar 30, 2015  |  Ends: 5d, 15h  |   17 Proposals
I am looking for a designer and draftsman who is familiar with residential new construction homes in the Midwest area, Minnesota based. The idea person would have: 1) Knowledge in the building industry and residential new construction. 2) A designer that can contribute ideas and floor plans when I run out of ideas 3) Be able to supply 2D and 3D models 4) Would prefer to have someone be able to assist with material take-off lists (based on the 2D/3D model created use that to calculate materials like siding, roofing, base board, case, flooring, etc...). 5) Supply cabinet layouts and elevations (not 20/20 views just general for the cabinet makers to know the space they are working in). 6) Work with tight homeowner deadlines and work with me on plan changes. 7) Proficient in English language, both spoken and written. Good communication skills and planning. 8) MUST BE ABLE TO SUPPLY CONSTRUCTION DRAWINGS to submit to the city for permits, however, in the state of MN they are no...
Category: Architecture       
Skills: 3D, 3D Modeling, Architecture, AutoCAD, 3D Design       
Preferred Location: United States

M****mes
 [?]
Sign in to view client's details.
| M****mes
|    United States
Fixed Price: Less than $500   |  Posted: Mar 30, 2015  |  Ends: 13d, 15h  |   25 Proposals
Hello, Please let me know first on how many square meter is the villa at the link below and if I can apply the same (or a bit smaller of the same) design on a land of 200 square meter. Please quote me your fee for the design of the villa at the link below:   [obscured]  /phuket-holiday-rental.php?nom=Modern%20Villa Thank you.
Category: Architecture       
Skills: 3D Modeling, ArchiCAD, Architecture       

g****dia
 [?]
Sign in to view client's details.
| g****dia
|    United States
Hourly Rate: $15 - $20 / hr   |  Duration: Not Sure  |  Posted: Mar 30, 2015  |  Ends: 13d, 13h  |   45 Proposals
Design 2D drawings of different existing assemblies according company CAD guideline which describe rules, functions and layouts of 3D and 2D design with Solid Works and Solid Works Inspection. Tasks in this job are: - Set properties to assemblies - Create 2D drawings according company template - Add dimensions for Incoming inspection according existing 2D drawing examples Required preparation for this job are: - Read company CAD guideline - Set all the Solid Works settings to create drawings
Category: CAD       
Skills: 3D, SolidWorks, 2D Design, Solid Works Inspection       

c****kue
 [?]
Sign in to view client's details.
| c****kue
|    Switzerland
Fixed Price: Not Sure   |  Posted: Mar 30, 2015  |  Ends: 13d, 9h  |   24 Proposals
I have a 10,000m squared land, that has border walls & in one corner an 6x8m room. This land is designed to be an equestrian breeding centre and I wanted it to have one stable, labor room, one guest living room (Arabic guest house), and 3 small villas, the rest of the land is for large arenas, 1 show arena, and landscapes. I have a prepared map of the land and floor plan. I need an architect to help me with the following: 1) architectural design and drawings 2) material selection 3) 3d rendering of the designs We will be providing you with the materials you will be needing before we start the project.
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

R****992
 [?]
Sign in to view client's details.
| R****992
|    Kuwait
Fixed Price: Less than $500   |  Posted: Mar 30, 2015  |  Ends: 13d, 5h  |   58 Proposals
We're an acoustic treatment company looking for an engineer to develop a new 3D product design within CAD - or a CAD-like program. Seeking dimensional drawing to depict top, front, and side views, as well as a dimensional-less 3D rendering. We will provide a sketch / physical attributes of the product in development.
Category: CAD       
Skills: AutoCAD, SolidWorks, .NET Framework, 3D Rendering       

O****ics
 [?]
Sign in to view client's details.
| O****ics
|    United States
Fixed Price: Less than $500   |  Posted: Mar 29, 2015  |  Ends: 13d, 4h  |   12 Proposals
Hello, We are developing a smart watch, and have a non-functional prototype but we want a reveal film for our upcoming release. Attached you will find pictures of the watch. What you need to do is create a CAD file that looks nearly identical to these images, then create a video with it outlined below. The video will be similar to an Apple style reveal film (see links below). In the video you will pan around the rendered watch, then towards the end you will show the face which will go from the round watch face, to hexagon design. (I will provide these images). You will also find in the images provided that the bezel rotates to select icons, so in the video you will need to design the bezel to rotate a little and select a hexagon. This will be a combined action from the press of the crown, and rotate of the bezel. See the images for more info. The video will show off the watch in a black leather band as shown in the images. The song playing behind the video will be Gold by Chet Faker...
Category: Animation       

d****omb
 [?]
Sign in to view client's details.
| d****omb
|    United States
Fixed Price: Less than $500   |  Posted: Mar 29, 2015  |  Ends: 13d, 1h  |   3 Proposals
This posting is for BCIN stamping on a design for a garage. I need the stamps on a garage design for permits. I am attaching the drawings for your review. We need to flip the roof to be supported on the two side walls instead of the back and the front (as in the design). I can provide the existing CAD design for your review.
Category: Architecture       
Skills: 3D, 3D Modeling, Architecture, AutoCAD       
Preferred Location: Canada

z****idh
 [?]
Sign in to view client's details.
| z****idh
|    Canada
Hourly Rate: $20 - $30 / hr   |  Duration: Not Sure  |  Posted: Mar 29, 2015  |  Ends: 27d, 18h  |   14 Proposals
Hi- I am a landscape architect with 30 years of experience, just starting my own firm. Looking for help on a contract basis to produce construction drawings for my high-end residential projects, ideally looking for someone with an l.arch. background that understands landscape graphic conventions. Possibility of 2D/ 3D renderings with demonstrated experience. Prefer New York City/New Jersey based freelancers. Thanks for your interest!
Category: Other - Design       
Skills: Landscape Design, AutoCAD       
Preferred Location: United States

W****ris
 [?]
Sign in to view client's details.
| W****ris *
|    United States
Fixed Price: Less than $500   |  Posted: Mar 29, 2015  |  Ends: 18h, 43m  |   12 Proposals
I have one bass bait (see attachment - mine will be similar to the top sweet beaver bait) that I need 3d laser scanned. Of course, I will have to send you some samples. Then, I need you to convert the scan into a 3d model and provide me either step or iges files. I plan to source job right away, but of course I will need to send you the bait samples to work with. This could also lead into having you do a mold design. Thanks - looking forward to reviewing your proposals. Brent Robbins Lunker Mania Baits, LLC Michigan - USA
Category: 3D Modelling       
Skills: 3D, 3D Scanning, 3D Design       

Y****haa
 [?]
Sign in to view client's details.
| Y****haa
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 29, 2015  |  Ends: 12d, 18h  |   28 Proposals
Immediate Needs: I am in need of engineering support and assistance to help manage the large amount of various types of work for a multitude of projects that I have to complete.I currently need assistance with different tasks, such as field and lab test report completion, 2D/3D drafting and design assistance, or any other assignable tasks that may be requested to support the requirements of current and future work load. Looking to the Future: I am looking to develop a multi-disciplined civil, structural, geotechnical, environmental, water resources, and coastal engineering team. I am hoping to build long term working relationships for efficient team work in the development of top notch deliverables for innovative solutions using sustainable design and solid engineering. Long term plans of developing a leading international "green" multi-disciplinary engineering firm specializing in islands and coastal areas. If this sounds like an opportunity of interest to you? Please p...
Category: Civil & Structural       

a****ing
 [?]
Sign in to view client's details.
| a****ing
|    Virgin Islands (US)
Hourly Rate: $15 - $20 / hr   |  Duration: 3-4 weeks  |  Posted: Mar 29, 2015  |  Ends: 27d, 14h  |   14 Proposals
Since my ideas are a bit different from what's out there in the retail market today, I need a designer to bring some color, personality and accredited visuals to my thoughts and sketches (e.g. a picture says a 1000 words). Finding a versatile designer that can do it all (or as much as possible) would be ideal (please confirm which areas you can do and which you can't). - Store Layouts - combination of aisles of gondolas and open spaces (e.g. the "flat" store layout in blocks...not exact, but general areas) - In-Aisle (bay) design - will not be a simple POG, but rather a state-of-the-art way of looking at how to shop going forward - Product display areas (e.g. walk-through area a la Ikea) - Whole store layout (design vs. layout)...the "3D" visual of how the store could look from inside and out (e.g. curb appeal) What we'd be going after is more similar to Bonobos / Warby Parker / Kit & Ace vs. a traditional retail environment. Skills: having ability to turn bu...
Category: Interior Design       

j****015
 [?]
Sign in to view client's details.
| j****015
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job