Save this Search
     

All Jobs3dEngineering & Manufacturing

 (220 results)  
Sort by:
  • Posted Date
Engineering & Manufacturing
Fixed Price: Not Sure   |  Posted: 24 minutes ago  |  Ends: 14d, 23h  |   0 Proposals
I need to develop a prototype. The Product needed is a flat, flexible, rubber, waterproof, durable, working solar panel (all wires must be concealed in the flexible rubber structure). Around 3" x 9" in size with a strong velcro strap on the back.
Category: Product Design       

h****lan
 [?]
Sign in to view client's details.
| h****lan
|    Ireland
Fixed Price: About $400   |  Posted: 6h, 49m ago  |  Ends: 14d, 17h  |   5 Proposals
Feasability study with regards to adding bluetooth technology to existing odometer for sports gadget. The study should comprise the following: 1) Technical Analysis: 1-a) Detailed design description of current design 1-b) Highlighting changes in the design 1-c) Propose new design block diagram 1-d) Functionality of each block 2) Financial Analysis 2-a) List of proposed components along with cost - unit and bulk prices (BOM) 2-b) Packaging material cost 2-c) Manufacturing cost (FOB preferably) Attached a file that describes the entire project where this feasibility report is the first step to go from idea to manufacturing.
Category: Product Design       

N****ert
 [?]
Sign in to view client's details.
| N****ert
|    Netherlands
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 7h, 55m ago  |  Ends: 14d, 16h  |   7 Proposals
I need some one to design a custom race kart frame for me the one main thing I ask is that it can support a Suzuki gxsr 600cc engine with chain drive in the rear, it cant sit no more then 2" from the ground, I would like it to be 1.5" from the ground it will have 6" * 11" tires in the rear let me know if you can come put with a design for this I would need all of the deminsions as well also it has to support a 6' tall person
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

d****ts1
 [?]
Sign in to view client's details.
| d****ts1
|    United States
Fixed Price: Not Sure   |  Posted: 10h, 23m ago  |  Ends: 6d, 13h  |   26 Proposals
The job consists of 3D design of pill bottle, cap, and an internal part for printing. Example model can be provided and explained more in depth to the awarded freelancer. An example model will be provided for show of concept and the completed model provides no complexity, just step by step height and width of cap, bottle, and internal part. The overall thickness of the parts will be no less than 2mm for printing purposes. Thanks for your consideration,
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

s****don
 [?]
Sign in to view client's details.
| s****don
|    United States
Fixed Price: Less than $500   |  Posted: 10h, 34m ago  |  Ends: 14d, 13h  |   16 Proposals
This job is to take 8 .STL files from a 3D scanner and clean up the imperfections from those scans into 4 .STL files. The files are from the scan of the front and back of a sheet metal stamping. What I want to do is combine the front and back with the known sheet metal thickness into a single .STL file. The sheet metal is flat and I want the letters to be consistent and uniform. I am looking to have 2 of these done ASAP. (The WILLYS ones in the example.)
Category: Product Design       

a****eep
 [?]
Sign in to view client's details.
| a****eep
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: 1-2 weeks  |  Posted: 13h, 13m ago  |  Ends: 14d, 10h  |   3 Proposals
Looking for 2D CAD draftsman for a 4000 sqft interior project (and several others) using Microstation V8i. Applicant must have V8i software.
Category: Architecture       

j****ure
 [?]
Sign in to view client's details.
| j****ure
|    Hong Kong SAR, PRC
Fixed Price: Less than $500   |  Posted: 14h, 20m ago  |  Ends: 14d, 9h  |   1 Proposal
Basic Objective: Save and synchronized the captured images with the navigation measurements at the time of camera's exposure. ? The images can be saved in the photos folder in the iPhone. The image should be the whole view and not craped. ? The navigation data can be saved in .txt or .excel file as shown in table below. This file can be send using given email. ? The synchronization can be through the GPS time. Where each image is tagged with GPS time. Then the user will know which navigation epoch is associated with which image throughout the track of image time. Job Description: l
Category: 3D Modelling       

n****bai
 [?]
Sign in to view client's details.
| n****bai
|    Canada
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 19h, 3m ago  |  Ends: 2d, 4h  |   8 Proposals
We are looking to create an innovative design which will incorporate a scoop into a screw on cap for powder product. The cap is a 97mm triple lead cap and the scoop is a 26.5cc scoop with a folding handle. The product it is used in is a nutritional supplement, meal replacement shake and want the customer to not have to dig through the powder to find the scoop. The product must have an induction or conduction seal present so the scoop must fit within the cap having this present and not interfere or create open seals/quality issues. Currently the scoop is manufactured seperately from the cap and still could be going forward. We are looking to see if there is some type of snap feature, locking feature, or other means of keeping the scoop secure to the cap. It must be fitted together easily, either through hand application but preferable some type of robotic assembly. We are looking for conceptual drawings, 3D models and a design that can easily be translated into a mold design and manu...
Category: Product Design       

K****erb
 [?]
Sign in to view client's details.
| K****erb
|    United States
Fixed Price: Not Sure   |  Posted: 19h, 5m ago  |  Ends: 14d, 4h  |   11 Proposals
Hello, Looking for someone to help me source a product like this one. Here are the requirements: High quality fabric, thick and strong. Also pre-shrunk. Thick draw strings Fabric draw string locks Metal eyelets to hold strings Custom screen printing The dimensions of the laundry bag are 25" x 22" x 8." Shoulder straps to hold bag This is a great example:   [obscured]  /s/files/1/0058/2682/products/LaundryBagAnatomyHiRes.jpg?v=1353274310
Category: Product Design       

a****009
 [?]
Sign in to view client's details.
| a****009
|    United States
Fixed Price: $50 - $100   |  Posted: 19h, 6m ago  |  Ends: 14d, 4h  |   0 Proposals
I have already made a model in CST but having difficulty understanding the scattering properties and wondering if scattering matrix could be implemented like the attached pdf file in the teeth model. Any other advice on this project will be highly appreciated :D
Category: 3D Modelling       
Skills: CST       

s****han
 [?]
Sign in to view client's details.
| s****han
|    United Kingdom
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 19h, 46m ago  |  Ends: 14d, 4h  |   4 Proposals
A lid that can snap over a water Bottle size do not matter, but must have a straw in the middle and also one to exit on the side
Category: Contract Manufacturing       
Skills: 3D Printing       

F****ver
 [?]
Sign in to view client's details.
| F****ver
|    Bahamas
Fixed Price: Less than $500   |  Posted: 19h, 58m ago  |  Ends: 14d, 4h  |   12 Proposals
We are looking for a talented designer and jewelry 3d CAD modeler. The selected candidate should be familiar with jewelry designs and jewelry CAD modeling. The final models should be sent for 3d printing or if you are us based you can ship us the molds at our expense of course. First you should make the CAD model (3dm) then after finalizing the CAD model send us the mold or files to 3d print. We would prefer for the molds to be sent but we can do it the other way. We want there to be a minimum of 4 pictures per style. We would also like to have videos rendered with the ring on the finger and the ring spinning by itself. Here are the examples example of video of ring spinning   [obscured]  /engagement-rings/solitaire/14k-white-gold-2mm-knife-edge-solitaire-engagement-ring-six-prong-item-7990 example of video of ring on finger   [obscured]  /watch?v=eqNa_vIeCgw just a little bit slower All pictures and videos need to have white background and the same quality as...
Category: 3D Modelling       
Skills: 3D Modeling, 3D Design, 3D Rendering, CGI       

j****031
 [?]
Sign in to view client's details.
| j****031
|    United States
Hourly Rate: $15 - $20 / hr   |  Duration: 1-2 weeks  |  Posted: 21h, 17m ago  |  Ends: 14d, 2h  |   17 Proposals
I have a product design that needs a CAD and Render. Let's start with just the CAD. This product is a heater for cell phones in cold climates. I have attached a PDF of a hand drawing to help you visualize. It will have an integrated battery, switch, and heater plate that is completely independent of the cell phone. It should meet the following requirements: - Case should snap over the phone (It doesn't have to be perfect, but please make sure the CAD can be tweaked) - Case should house a thin aluminum plate that will be crafted as the heater plate - Case should house a small lithium ion battery (dimensions provided) Once the CAD is done, if you can do a render within the given budget, go ahead and do that. The case will be 3D printed, so if you have any knowledge of that, it should help. Otherwise, all you have to do is minimize fine detail, and reduce overhangs. In this case, the overhang to allow the case to hold the phone is fine.
Category: CAD       

w****sjg
 [?]
Sign in to view client's details.
| w****sjg
|    United States
Fixed Price: More than $10,000   |  Posted: 22h, 10m ago  |  Ends: 14d, 1h  |   27 Proposals
Need a TEAM to convert these schematics (143 room Hotel) into CAD drawings. Goal is to have something in a week (first draft) and a final (two weeks)   [obscured]  /sh/vf01pt995g0ymm9/AACgtXgKhp48_0JlC9gVqms8a?dl=0 Email me at   [obscured]  
Category: 3D Modelling       
Skills: 3D Modeling, AutoCAD, OrCAD       

s****en1
 [?]
Sign in to view client's details.
| s****en1
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 23h, 11m ago  |  Ends: 14d, 0h  |   16 Proposals
a plastic funnel which has threads at both ends, allowing two plastic containers to be joined and consolidate contents into one container.
Category: Product Design       

T****969
 [?]
Sign in to view client's details.
| T****969
|    United States
Fixed Price: $500 - $1,000   |  Posted: 23h, 11m ago  |  Ends: 14d, 0h  |   12 Proposals
PROFIL TENSION SYSTEM est spécialisé dans les systèmes de tension de toile. Nous réalisons des modules de plafonds acoustiques et des façades de bâtiments pour la protection solaire.   [obscured]  -textile.com et   [obscured]   Nous recherchons un dessinateur 3D Solidworks pour une mission courte. Mission à rendre le 30/07/15.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

p****rop
 [?]
Sign in to view client's details.
| p****rop
|    Switzerland
Fixed Price: $500 - $1,000   |  Posted: 23h, 12m ago  |  Ends: 14d, 0h  |   4 Proposals
PROFIL TENSION SYSTEM est spécialisé dans les systèmes de tension de toile. Nous réalisons des modules de plafonds acoustiques et des façades de bâtiments pour la protection solaire.   [obscured]  -textile.com et   [obscured]   Cherchons un dessinateur pour la réalisation de plans techniques. A rendre le 30/07/15.
Category: CAD       
Skills: AutoCAD, OrCAD, SolidWorks, 3D Design       

p****rop
 [?]
Sign in to view client's details.
| p****rop
|    Switzerland
Fixed Price: Less than $500   |  Posted: 23h, 32m ago  |  Ends: 14d, 0h  |   13 Proposals
It is a plastic ring that I named Holehoop made for a new game I am designing. I have made a 2D(file holehoop4) drawing that I hope you make a 3D model, for a prototype.
Category: 3D Modelling       
Preferred Location: United States

f****c31
 [?]
Sign in to view client's details.
| f****c31
|    United States
Fixed Price: $500 - $1,000   |  Posted: 23h, 33m ago  |  Ends: 14d, 0h  |   7 Proposals
PROFIL TENSION SYSTEM est spécialisé dans les systèmes de tension de toile. Nous réalisons des modules de plafonds acoustiques et des façades de bâtiments pour la protection solaire.   [obscured]  -textile.com et   [obscured]   Réalisation pour un client de plans de structures en aluminium. A rendre le 30/07/15.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

p****rop
 [?]
Sign in to view client's details.
| p****rop
|    Switzerland
Fixed Price: $1,000 - $5,000   |  Posted: Jul 27, 2015  |  Ends: 58d, 22h  |   18 Proposals
Hello, I'm currently adding to a robot prototype I have, and would like to work with someone who has experience in working with manufactured products. Ideally you are a mechanical/electrical engineer or an industrial designer that would either help with the internal electronics and motors or a designer who will help with materials and 3D designs that are ready for manufacturing. The things I have already worked out are: - The way the robot navigates - Self balancing on ball (see picture) - Dimensions The things I need work on: - A way to interact with the robot - Developing the arms to fit the design - Work with parts (micro processor and such) to help when it comes to manufacturing
Category: Product Design       

s****awy
 [?]
Sign in to view client's details.
| s****awy
|    Canada
Hourly Rate: Less than $10 / hr   |  Duration: 1-2 weeks  |  Posted: Jul 27, 2015  |  Ends: 13d, 22h  |   8 Proposals
Hello, I wanted to know typically how much you would charge for a 3D-CAD image for a small product made up of two pieces - almost like a mascara tube and brush but with simple mechanics on the inside of the tube. I'm also interested to know about your product design services and your manufacturing services. Hope to hear from you soon. Joyce
Category: 3D Modelling       

L****yce
 [?]
Sign in to view client's details.
| L****yce
|    Nigeria
Fixed Price: $30 - $100   |  Posted: Jul 27, 2015  |  Ends: 13d, 19h  |   1 Proposal
I need help with carrying out simulations for heat and mass transfer, as well as fluid flow within a system using STAR CCM+. Please let me know if that is something you can handle. Thanks.
Category: Other - Engineering &...       
Skills: 3D Modeling, CFD Modelling, STAR CCM+       

z****ati
 [?]
Sign in to view client's details.
| z****ati
|    United Kingdom
Fixed Price: Not Sure   |  Posted: Jul 27, 2015  |  Ends: 13d, 18h  |   18 Proposals
Hi, we have a prototype UAV that we have built and we would now like to take it further and make it look tidier and nicer. We would like to make the aircraft out of composites, in molds. This requires that we have stl files for those molds. Also we would like to enhance the design, look into details, change things around etc. All this requires as first step that we have a full working computer model of the aircraft. There are a few moving parts (e.g. the tail surfaces, propellers, landing gear retract) but it is not a huge amount of moving things. We have relatively accurate measurements and even a physical 'model' although it is not that nice, at least it can be looked at to get a rough idea. Created files should be viewable and be able to be manipulated in Autodesk inventor, because we have this program and it would be easier if both you and we could fully view the file, turn it around, assemble and disassemble the model, make measurements, etc. We would prefer a fixed pric...
Category: CAD       

S****DDG
 [?]
Sign in to view client's details.
| S****DDG
|    Singapore
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 27, 2015  |  Ends: 13d, 12h  |   16 Proposals
Hello, I would like to create a new design for these camera glasses.   [obscured]  /product-detail/140degree-wide-angle-Ambarella-A5-camera_60289050481.html?spm=a2700.7724838.35.1.fGPqG8 The electronics will be the same, but the new look should be as close to this as possible.   [obscured]  /news/google-glass-price-release-date-specs-and-info The electronics and battery can be housed behind the ear, as in the original design. Once hired, I will have samples of original design to you to take apart. -Once design is approved, I want to have samples 3d printed, to test fit. Finally, I want to take product into production to be delivered to factory for electroncs.
Category: Mechanical       

e****sio
 [?]
Sign in to view client's details.
| e****sio
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: 1-2 weeks  |  Posted: Jul 26, 2015  |  Ends: 13d, 12h  |   15 Proposals
I have attached the concept drawing, Want to design an air freshener that can be attached between the vents for in home use. want the design to look like an actual product any changes or input to make the design look better would be appreciated.
Category: 3D Modelling       
Skills: Graphic Design, 3D Modeling, 3D Rendering       

m****c56
 [?]
Sign in to view client's details.
| m****c56
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job