Save this Search
     
Sort by:
  • Posted Date
Engineering & Manufacturing
Hourly Rate: $10 - $25 / hr   |  Duration: Not Sure  |  Posted: 8h, 29m ago  |  Ends: 14d, 15h  |   8 Proposals
I have a preliminary design of a two story house in autocad file . i would like to fully design the house with REVIT according to the Canadian standard wood houses. please include all of the details of columns, beams, joists, etc.. Kindly, i would like to see the elevations of all sides along with the interior sections. please note that the file must be in revit format.i need it before Sat, May 30,2015. your help is much appreciated!
Category: Civil & Structural       
Skills: AutoCAD, Structural Analysis, AutoDesk Revit       

m****lsh
 [?]
Sign in to view client's details.
| m****lsh
|    Canada
Fixed Price: Less than $500   |  Posted: May 24, 2015  |  Ends: 13d, 10h  |   10 Proposals
I need to have an Engineer do the framing plans on a home for a job I am working on to bid out to estimate my budget. The city I am in is Frisco Texas and they require the plans to be stamped by and engineer. There are several wide rooms and a covered porch that will need to have trusses/glulam beams with cross boards to support the open spans. I also need someone who is familiar with cost to help me figure out the most affordable take off for materials. I have the floor plan, roof plan, elevation plans in an editable autocad file format to work from. See attached pdf floor plan. I look forward to your bid !
Category: Civil & Structural       
Skills: AutoCAD, Civil Engineering       

k****123
 [?]
Sign in to view client's details.
| k****123
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 24, 2015  |  Ends: 13d, 0h  |   8 Proposals
Looking for someone to write bid proposal for land surveying and civil engineering jobs. If I like your work this will become a regular thing.
Category: Civil & Structural       
Skills: ANSYS, AutoCAD, Civil Engineering       

e****726
 [?]
Sign in to view client's details.
| e****726
|    United States
Hourly Rate: $40 - $50 / hr   |  Duration: Not Sure  |  Posted: May 23, 2015  |  Ends: 12d, 13h  |   5 Proposals
This job will involve updating a document that tracks changes in the ACI code provisions relating to a particular software package. The document currently tracks changes from ACI 318-02 through ACI 318-11 and needs to be updated for ACI 318-14. Candidate must be a structural engineer (not necessarily licensed) with experience in concrete design.
Category: Civil & Structural       
Skills: Civil Engineering       

E****Inc
 [?]
Sign in to view client's details.
| E****Inc
|    United States
Fixed Price: Less than $500   |  Posted: May 22, 2015  |  Ends: 10d, 17h  |   10 Proposals
We have a basic plan for adding a second level to an existing ferry boat. We aren't looking for design help. We just need to know what size and type of steel beams we should be using to minimize weight, and maximize space. The footings are not a problem, they are stable. The size of the space is 21 meters long, 7.5 wide on one end, and 6.5 meters wide on the other, with an almost constant taper. The ceiling height is 2.2m. We can place beams at 2m centers, length wise. We would like to place them 2m from the edge of the boat on both sides, so that will leave ~3.5m spacing in the center, width wise. The roof on the second level will be a simple apron with a removable canvas top. We want to use normal commercial standards for load capacity. Floor above will be wood. Below the new deck connects to steel. Again, the basic design is not a problem. Just looking for load calculations so that we can decide what size/shape/type of steel to use for support columns, support beams, spacing, etc. P...
Category: Civil & Structural       

u****ail
 [?]
Sign in to view client's details.
| u****ail
|    Cambodia
Fixed Price: $1,000 - $5,000   |  Posted: May 21, 2015  |  Ends: 10d, 12h  |   2 Proposals
We have a Multi family project in Bakersfield. the building is sinking. We have an experienced contractor with a Pressed pier plan quote need an engineer to get the plans approved by the county building department for construction. I don't require structural analysis. just redo some of the drawing, county may require the plans be stamped.
Category: Civil & Structural       

n****lco
 [?]
Sign in to view client's details.
| n****lco
|    Taiwan
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 21, 2015  |  Ends: 10d, 0h  |   5 Proposals
drawings will be provided by ours you have to quantify , filling qty , prepare bill of quantity (boq)..
Category: Civil & Structural       
Skills: 3D Modeling, AutoCAD, Civil Engineering       

a****rks
 [?]
Sign in to view client's details.
| a****rks
|    India
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 21, 2015  |  Ends: 10d, 0h  |   1 Proposal
drawings will be provided by ours you have to quantify , filling qty , prepare bill of quantity (boq)..
Category: Civil & Structural       
Skills: 3D Modeling, AutoCAD, Civil Engineering       

a****rks
 [?]
Sign in to view client's details.
| a****rks
|    India
Fixed Price: Less than $500   |  Posted: May 20, 2015  |  Ends: 9d, 6h  |   3 Proposals
Recently i purchase single family in North Hollywood,CA, 91606. We would like to get permit for 1000 addition by owners. I need somebody licence to provide document submittal list. please check attachment.
Category: Civil & Structural       

l****all
 [?]
Sign in to view client's details.
| l****all
|    United States
Fixed Price: $500 - $1,000   |  Posted: May 20, 2015  |  Ends: 8d, 19h  |   7 Proposals
Hi We are looking for a Revit BIM modelere having good exposure in Revit Architecture, Structure or Revit MEP for our trivandrum office.
Category: Civil & Structural       

g****mar
 [?]
Sign in to view client's details.
| g****mar
|    India
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 19, 2015  |  Ends: 8d, 6h  |   3 Proposals
I need calculations for some 2 beams using LFRD load combinations 5,6b and 8 with over strength factor. beam is supporting a discontinuous shear wall.
Category: Civil & Structural       
Skills: Structural Engineering       

D****171
 [?]
Sign in to view client's details.
| D****171
|    United States
Hourly Rate: Not Sure   |  Duration: 3-4 weeks  |  Posted: May 19, 2015  |  Ends: 8d, 6h  |   5 Proposals
Purpose: To help collect and filter the chatter of social media Task: Monitor discussions on LinkedIn groups for wastewater and water treatment related discussions. Deliverable: Once per week select & provide 10 best discussion threads for me to comment on. I will select 1 or 2 or 3 per week to write a response. Bonus if you can provide me with YOUR technical research and thoughts and analysis of the topic. Background: There are more than 50 wastewater related LinkedIn groups. Monitoring them all can be time consuming and I need help. I'm interested in providing value to the wastewater community and showcasing my expertise to potential clients for my consultancy services. The initial commitment will be for four (4) weeks and then consider extending.
Category: Civil & Structural       

d****330
 [?]
Sign in to view client's details.
| d****330
|    Canada
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 19, 2015  |  Ends: 7d, 23h  |   6 Proposals
attached autocad exisitng and new conceptual site plan : scope of the work on the new site Plan : Section A,B, and C. the work required for the architect/engineer to be completed : 1) take CAD file and complete full architectural and engineer dwgs package for submital review for construction permit. 2) dwgs will include : architectural layout of the new addition, new roof line, elevation, foundation plan, framing plan, electrical plan, plumbing plan, hvac plan, finish plan, architectural and engineering details, structural engineering plan and calculation and any addition plan and sectional require by the city as part of the submittal package for review. 3) attached for reference : new addition layout, reference photos and aerial views, pdf of the existing and new site plan proposing work to be done. Please provide a complete proposal turnkey package and specific deliverable(s): engineering work included or not, lead time, pricing. please send past project sample or portfolio for re...
Category: Architecture       

p****oup
 [?]
Sign in to view client's details.
| p****oup
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 18, 2015  |  Ends: 7d, 12h  |   9 Proposals
I need to set up the sections of a building, according to wind loads and quake loads. I just need help doing this. Although I have the instructions, I need to make sure I do it right. Thank you
Category: Civil & Structural       

j****mon
 [?]
Sign in to view client's details.
| j****mon
|    United States
Fixed Price: Not Sure   |  Posted: May 18, 2015  |  Ends: 7d, 4h  |   4 Proposals
I am looking for professional translator for a technical site and software in the climatization area. Portuguese - English (here I need to translate also technical articles) English - Italian PortuguÍs - Espanhol
Category: Mechanical       

j****iro
 [?]
Sign in to view client's details.
| j****iro
|    Portugal
Fixed Price: Less than $500   |  Posted: May 16, 2015  |  Ends: 5d, 12h  |   1 Proposal
Longhorn SW3P as text with longhorn head (long, horizontal horns) as the logo. Black and gray or lime green and bright orange. Brooks & Dunn skull logo is one I like. This is a Texas company that designs and installs erosion control systems for large commercial projects (office buildings, hospitals, parking garages) and public highway projects and other public improvements (schools, parks, convention centers, and redevelopment projects). Customers are civil engineers and large general contractors.
Category: Civil & Structural       

b****nes
 [?]
Sign in to view client's details.
| b****nes
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 15, 2015  |  Ends: 4d, 15h  |   5 Proposals
A scale drawing is to be provided of the external side profile of a hybrid hoop/gothic arch framed greenhouse design. The anticipated tube/pipe construction will be detailed (weight, length, diameter, metal type, etc. as provided by the manufacturer. Project deliverables expected include: 1) Identification of structural stress points 2) Recommended design configuration of internal reinforcements (will require a simple sketch) to address the stress points identified in 1) above. Reinforcements may be either a specified pipe/tubing (size, length, gauge, etc.) or, when feasible, tension wire (preferred due to cost weight savings). 3) Estimation of the approximate vertical load bearing weight with the reinforcements recommended in 2) above. Factors not to be considered in this project include wind or other horizontal forces. The goal is a rough understanding of the technical feasibility of the proposed design to serve as a starting point for further consideration. Edited: Scale Dra...
Category: Civil & Structural       

O****4me
 [?]
Sign in to view client's details.
| O****4me
|    United States
Hourly Rate: $30 - $40 / hr   |  Duration: Not Sure  |  Posted: May 14, 2015  |  Ends: 78d, 5h  |   10 Proposals
Structural Design Engineer High Rise Buildings, Villas,Schools Code ACI, BS, UBC. Seismic And Wind Analysis
Category: Civil & Structural       

E****leh
 [?]
Sign in to view client's details.
| E****leh
|    United Arab Emirates
Fixed Price: $500 - $1,000   |  Posted: May 14, 2015  |  Ends: 3d, 1h  |   4 Proposals
Hi I have written an engineering paper in ( composite ), and would like someone who knows a good journal to help me submit this paper in. I prefer someone who knows the journal editor. Thanks
Category: Other - Engineering &...       

A****ker
 [?]
Sign in to view client's details.
| A****ker
|    Australia
Fixed Price: Not Sure   |  Posted: May 14, 2015  |  Ends: 3d, 0h  |   6 Proposals
I need to do some pre-bid engineering of construction facilities for our upcoming project for fire fighting network in Oil/Gas Processing terminal at Surat, Gujarat, India. The discipline for engineering are required are Civil, Mechanical, Electrical and Instrumentation. Please let us know, if someone can take-up the job immediately.
Category: Civil & Structural       

g****uja
 [?]
Sign in to view client's details.
| g****uja *
|    India
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 13, 2015  |  Ends: 2d, 13h  |   4 Proposals
1. Responsible for the preparation of Bills of Quantities, Quantity Estimates & Costing of Projects for tenders. 2. Preparation of Cost Estimate for the Project 3. Carrying -out actual measurement on the Site 4. Preparation & Evaluating progress & preparing request for payments for on-going projects, its accomplishment & delivered materials. 5. Involved in both pre-contract 7 post contact services of the on0going & prospective projects
Category: Other - Engineering &...       

C****nao
 [?]
Sign in to view client's details.
| C****nao
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 13, 2015  |  Ends: 2d, 2h  |   7 Proposals
Hi I'm looking to hire someone to develop this product for me. The product is for me initially. But I will also be doing market testing to determine if there is a demand for it on the market. My ambition is to create and market the product. But first, it needs to be good enough. If it can be created, that is. The product I'm looking for is a somewhat like these:   [obscured]  /#testosterone   [obscured]  /media/dexcom-seven-plus   [obscured]  -app.com/the-glucotrack/ What I want is a continuous monitor for testosterone levels. Preferably non-invasive - meaning that it doesn't reach the blood-stream or interfere with biochemistry in any direct way. Put simply: "It should measure blood values, without directly interfering with them." For example, from one of the other products: "GlucoTrack uses ultrasonic, electromagnetic and thermal technologies to non-invasively measure glucose levels in the blood" I want the same type of product, but for a differe...
Category: Electrical       

e****arn
 [?]
Sign in to view client's details.
| e****arn *
|    Sweden
Fixed Price: $50 - $150   |  Posted: May 13, 2015  |  Ends: 2d, 1h  |   14 Proposals
My name is John - working for a Norwegian company delivering steel structures for all kind of buildings. We need continual help with estimates for total weight for steel to some buildings. We only have floorplans and facade drawings of the building, not any details about steel structure. We need you to: - if you miss information; do some assumptions or "reservations" - make a quick sketch for where the steel should be according to floor plans - do a "quick" calculation for the steel. This is in Norway, and might be snow load. - make an estimate for total weight of steel for this building We need good estimates - not detailed engineering I would like to work with people who could do this for less than 150$ Best regards John Steinar
Category: Civil & Structural       

j****sso
 [?]
Sign in to view client's details.
| j****sso
|    Norway
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 12, 2015  |  Ends: 16d, 11h  |   33 Proposals
Please read this carefully, this could be a huge opportunity for the right person/group or company. But If I can tell you haven't read the entire ad then we won't be able to work together. The freelancer MUST be available to chat via Skype or Google Hangouts throughout their workday. I need an AutoCAD Expert for Millwork/Cabinetry projects. The candidate needs to be able to proficiently use AutoCAD quickly and accurately to create construction drawings. Using correct standards and paying attention to detail is EXTREMELY IMPORTANT. I will go over your first few projects very carefully, if there any issues with CAD standards I will have to find someone else immediately. I don't have time to check over numerous projects to make sure that text sizes are done right and that all the redlines were completed properly. That is your job as a freelancer and needs to be done right the first time If you have experience with Architectural, Telecom, or Civil CAD production that is a plus but not...
Category: CAD       
Skills: AutoCAD, Construction, Drafting, CAD/AutoCAD       

p****ton
 [?]
Sign in to view client's details.
| p****ton
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job