Fixed Price: $500 - $1,000
| Posted: 20h, 4m ago | Ends: 14d, 3h |
We need a custom interface card designed and fabricated that will accept a NGFF PCI card (such as the Intel 7265NGW) and adapt it to the proprietary 18-pin wireless card connector found in the current line of Apple MacBook Pro/Air models. Note: this is for the wireless card slot, not the SSD. The adapter card should plug into a MacBook Air wireless card slot (6+12 pin) and have an interface on it that accepts the NGFF card and routes all pins accordingly. The adapter card must be sized to fit inside the MacBook Air and allow secure attachment of the card to the adapter, and the adapter to the main board. While there are currently adapters for sale on eBay that allow using the Broadcom wireless cards found in these Apple MacBook Pro/Air models in normal Mini-PCIe slots, I need the reverse interface: accept an NGFF wireless card (as Mini-PCIe will not fit inside the MacBook) and convert it to the adapter found in the MacBook. This is for the hardware adapter only - no drivers or oth...
Hourly Rate: Not Sure
| Duration: Not Sure
| Posted: May 29, 2015 | Ends: 11d, 0h |
Hello, I currently have a lot high powered computer equipment in my house and would like to in crease the amount of servers I can hook up, but requires more power. I I'm a 3 townhome condo and was told that tandem breakers would help me pull more power, as well as potentially install additional circuits in empty slots as well. I have posted pictures but please feel free to ask me any questions if you have any. I am also in Vinings. Thanks.
Fixed Price: $1,000 - $5,000
| Posted: May 24, 2015 | Ends: 5d, 23h |
Development of a small mobile robot. Robot integrates : - 3 x DC motors - 1 x Camera - 1 x Microphone - 1 x Speaker - 1 x Accelerometer, Gyroscope, etc. - 1 x PCB LEDs - 1 x Battery - 1 x Accessory port for future accessories Development of the mobile platform electronic, can be based on Arduino, Beaglebone or other commercial available boards. Robot controlled from a software or application, which can be used from a computer, tablet or smartphone.
Fixed Price: Not Sure
| Posted: Apr 19, 2015 | Ends: 46d, 4h |
l am desinging a locker back that uses electrical magnets for latches to close its doors. I want to connect these electrical magnets to be controlled with a computer. these are the electro magnets l want to use. [obscured] /item/Free-shipping-ZYE1-P34-DC-Stainless-steel-Round-Electro-Holding-Magnet-Electro-Holding-Force-18KG-12V/2011964493.html
Fixed Price: Not Sure
| Posted: Apr 05, 2015 | Ends: 2d, 4h |
Design a fully functional custom printed circuit board (PCB) to be used with Intel Edison(r) compute module ( [obscured] /content/ [obscured] /en/do-it-yourself/edison.html). Both the board and the module would preferably be powered using a single Micro USB type B receptacle (similar to the official Intel Edison(r) Mini Breakout board) connected to a power-path management IC like the TI BQ24074 or similar. The board should also contain a RJ45 Ethernet receptacle connected to a Microchip LAN9500A (or alternatively LAN9512) Ethernet-to-USB chip and Microchip 24AA02E48 EUI-48 EEPROM chip, which would provide unique MAC address to the Ethernet interface. In addition, the board should have pin headers for reset switch and status LEDs. UPDATE: I added a draft of possible circuit board layout design. The final design doesn't need to be exactly as in the image, but it hopefully gives you a better idea of what I am looking for. - I have no hardware design experience so I am dependant on y...