Save this Search
     

All JobsComputerEngineering & Manufacturing

 (37 results)  
Sort by:
  • Posted Date
Hourly Rate: $100 - $500 / hr   |  Duration: 3-4 weeks  |  Posted: 17h, 41m ago  |  Ends: 14d, 6h  |   8 Proposals
Hi I am looking for someone to design a device connect to a computer via USB and send signals to other devices of its kind on a net work, I will give a better explaination when contacted
Category: Other - Engineering &...       

A****tar
 [?]
Sign in to view client's details.
| A****tar
|    United Kingdom
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 17, 2015  |  Ends: 13d, 21h  |   0 Proposals
using Comsol to numerically simulate a piezoelectric sensor which transmits and receives shear waves to compute the shear wave velocity in the soil, rock and concrete.
Category: 3D Modelling       

A****-Mh
 [?]
Sign in to view client's details.
| A****-Mh
|    Canada
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 17, 2015  |  Ends: 13d, 21h  |   0 Proposals
using Comsol to numerically simulate a piezoelectric sensor which transmits and receives shear waves to compute the shear wave velocity in the soil, rock and concrete.
Category: 3D Modelling       

A****-Mh
 [?]
Sign in to view client's details.
| A****-Mh
|    Canada
Fixed Price: Not Sure   |  Posted: Apr 17, 2015  |  Ends: 13d, 7h  |   0 Proposals
IVISYS develops and sells machine vision solutions for quality inspection and control at the factory floor. We would like to hire innovative engineers with programming and mathematical skills. We want to strengthen our R&D department by system engineers and SW developers. The R&D department is located in the Copenhagen area in Denmark System designer Of the system engineer, following are required: 1. Theoretical knowledge of the machine vision or computer vision technology and mathematics. 2. knowledge of image processing techniques . 3. Programming skills using Matlab and C++ . SW developers Of a SW developer, the following requirements: 1. Good programming skills using parallel processing techniques and GPUs 2. knowledge of computer HW and sensor interface. Job applications for both types of position are received
Category: Other - Engineering &...       
Skills: Electronics, 3D Systems, 3D Scanning       

I****sys
 [?]
Sign in to view client's details.
| I****sys
|    Denmark
Fixed Price: $20 - $30   |  Posted: Apr 14, 2015  |  Ends: 10d, 23h  |   2 Proposals
I need a programming for this shaft made by gibbscam. We supply 3d format solidworks. Lathe We looking to hire for a long term
Category: Other - Engineering &...       

M****c78
 [?]
Sign in to view client's details.
| M****c78
|    Canada
Fixed Price: Less than $500   |  Posted: Apr 14, 2015  |  Ends: 10d, 23h  |   19 Proposals
Looking for a quick 3D mockup of a space, there are 2 walls to make photorealistic. I would like to see each wall at an angle. See the PDF You do not need to recreate the 3 machines, unless you find something similar already built. Would like to see a computer on the one desk though and TV on the wall. Budget is $100 Please send samples of your work. Chris
Category: 3D Modelling       
Skills: 3D, 3D Design       

a****tcl
 [?]
Sign in to view client's details.
| a****tcl
|    United States
Fixed Price: $750 - $1,500   |  Posted: Apr 14, 2015  |  Ends: 10d, 19h  |   28 Proposals
ChemiSense is a Berkeley based start-up that is developing low-power, low-cost air quality monitors. As a bit of background, our company has just finalized the PCB board design for our native chemical sensor boards, but the firmware needed to interface with the sensors which are attached to the board still needs additional work. We are thus looking for someone with significant experience in programming microcontrollers (and by extension, experience with embedded C programming). It should be noted that our sensors are generally analogue devices (provide their data in analogue, not digital format) and we currently use I2C to transfer data. The goals of this project/contract would be to program the microcontroller to be able to read in data from the 3-5 sensors connected to the board and transmit them back to a computer or other mobile device via either bluetooth, WiFi, ethernet or USB.
Category: Electrical       
Skills: Embedded C, Microcontroller Programming       

C****cct
 [?]
Sign in to view client's details.
| C****cct
|    United States
Fixed Price: Not Sure   |  Posted: Apr 14, 2015  |  Ends: 85d, 10h  |   16 Proposals
Civil engineers create, improve and protect the environment in which we live. They plan, design and oversee construction and maintenance of building structures and facilities, such as roads, railways, airports, bridges, harbours, dams, irrigation projects, power plants, water and sewerage systems. They also design and build tall buildings and large structures that they can last for hundreds of years and withstand all weather conditions. Civil engineers can either be consulting engineers who advise on projects and design them, or contracting engineers who turn their plans into reality and maintain the structures once they are built. Typical civil engineering work activities include: ?undertaking technical and feasibility studies including site investigations ?using a range of computer packages for developing detailed designs ?undertaking complex and repetitive calculations ?liaising with clients and a variety of professionals including architects and subcontractors ?compiling job specs...
Category: Civil & Structural       

e****hdy
 [?]
Sign in to view client's details.
| e****hdy
|    Saudi Arabia
Fixed Price: Less than $500   |  Posted: Apr 14, 2015  |  Ends: 10d, 10h  |   1 Proposal
i want some to write a beep sound code for me in assembly language, i have a long sound will start from beep and then move on to full length sound, i need to test it on a special hardware, so one need to do following generate beep sound code in assembly convert it to hex file
Category: Electrical       

r****110
 [?]
Sign in to view client's details.
| r****110
|    Pakistan
Fixed Price: Not Sure   |  Posted: Apr 13, 2015  |  Ends: 9d, 19h  |   1 Proposal
I need someone that is expert with software Designing or in computer engineer. I want to create a software that is similar to Photoshop but very simple, I have some examples to provide. Something customized to my business. If you have knowledge in this field please contact for more information. Thanks
Category: Product Design       

n****zui
 [?]
Sign in to view client's details.
| n****zui
|    United States
Fixed Price: Less than $500   |  Posted: Apr 13, 2015  |  Ends: 9d, 18h  |   14 Proposals
We would like to have a photo booth designed that is standalone , portable , and one that you don't walk into. It will have a touch screen for sharing capabilities, the same screen where you would see yourself before taking the photo. The camera would be on top of it alongside a flash. A printer will also be available to print the photos and would take around 50 seconds to print. You can also take a picture from the main 22inch screen up front , and then use other iPad sized screen from any other side of the booth to print, to streamline speed and experience. So therefore you can incorporate a design that would have one main screen, and other screens on the back or maybe the sides so that people continue to the other side after taking their photo to do all share options and printing. It would need to be brandable so you would be able to stick vynil on it for design. Also if it would light up it would be a plus. We are looking for someone to design the booth, come up with c...
Category: Product Design       

g****id8
 [?]
Sign in to view client's details.
| g****id8
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 13, 2015  |  Ends: 9d, 17h  |   1 Proposal
Our company is seeking a Product Manager to source hardware and mange implementation of a body fat analyzer to be mounted on kiosk and integrated into and displayed on a computer. Duties/Responsibilities - Strong experience with the complete product life cycle - Identify manufacturers of body fat analyzers - Work within set budgetary guidelines - Work with manufacturer to meet FCC and FDA regulations - Participation in the design and testing aimed at assessing product performance and reliability Must-Have Characteristics - Work well under strict time constraints - Anticipate needs before they arise and present solutions - Assume additional responsibility without being asked - Exhibit precise attention to detail and strive to deliver the best product or results at all times - Be able to work in a relatively unstructured, entrepreneurial environment with a high degree of independence
Category: Product Design       
Skills: 3D Modeling, AutoCAD, Manufacturing Design       
Preferred Location: United States

a****ger
 [?]
Sign in to view client's details.
| a****ger
|    United States
Fixed Price: Not Sure   |  Posted: Apr 12, 2015  |  Ends: 12h, 8m  |   3 Proposals
Attached is are stp files on a wood frame I want built. Cherry wood stained- high quality finish and production. Well sanded and smooth. Initial bid is for 10 pieces. Then production of 100 pieces (give price in bid) and 500 pieces (give price within bid) Can also use method to support as shown in image_2342
Category: Contract Manufacturing       

J****erg
 [?]
Sign in to view client's details.
| J****erg
|    United States
Fixed Price: $500 - $1,000   |  Posted: Apr 12, 2015  |  Ends: 8d, 6h  |   8 Proposals
Read first, understand, then think if you qualify, then apply. - send me your best most comprehensive sample work - your CAD drawings not just on the paper but that has been used to build house real house in the real world. Don't send me your university home works. This high end residential house will have 8,000 - 12,000 sq. ft. of A/C space or 12,000 - 16,000 of AUR. French Chateau Style Residential Home with a lot of exterior and interior detail, detail, detail. Please see the following 3 sample of the houses that you will have to draw. your draw similar houses. You must meet engineering criteria. You must be familiar with us building codes. Builder will use your CAD drawing to build the house. You will produce 20 to 30 pages long sectional detail drawings, related text and specification documents. Do not bother to apply if you already have not done similar work.   [obscured]  /homes/for_sale/Flower-Mound-TX/house_type/27296099_zpid/24733_rid/days_sort/33.067557,-97.142251...
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

M****er1
 [?]
Sign in to view client's details.
| M****er1
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: 1-3 months  |  Posted: Apr 11, 2015  |  Ends: 7d, 21h  |   18 Proposals
I have continues work to program parts using mastercam for a haas mill and lathe. Experience is a must.
Category: CAD       

e****_54
 [?]
Sign in to view client's details.
| e****_54
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 11, 2015  |  Ends: 7d, 18h  |   1 Proposal
I need someone willing to meet me regularly near Beavercreek ohio 45434 that can quickly help me design my assembly of metal parts. I want a working animated assembly on the computer to use to make a working prototype to be patented. I'm either offering to pay hourly or 5% commission on parts sold which hopefully would be much more money for your time. Person must have a valid drivers license be able to pass drug screening and sign secrecy and non compete Contracts. You will either be offered a 5% equity stake in my company or a part time temperary on and off again as needed hourly employee. Person needs to be fluent in a solid modeling program with working assembly animation and show stress points once the model concept is working. I only have a rough idea how this needs to work so you must be able to help design the actual assembly.
Category: 3D Modelling       
Skills: 3D Modeling, SolidWorks       

S****rld
 [?]
Sign in to view client's details.
| S****rld
|    United States
Fixed Price: Less than $500   |  Posted: Apr 10, 2015  |  Ends: 6d, 16h  |   5 Proposals
Hello. I need someone who can help me with a business forecasting project. I will explain about the project in detail once you provisionally accept my offer. My budget is 90 USD. You must have experience in the field of statistics. I need the following to be a part of the project: Moving averages, SES, DES, L.Regression, Multiple regression, ARIMA. Also, you need to have a big dataset for this project. I have 10 days from today to get it done!
Category: Other - Engineering &...       

t****guy
 [?]
Sign in to view client's details.
| t****guy
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 09, 2015  |  Ends: 5d, 21h  |   28 Proposals
Hello. I have a small invention for which I need a CAD or sketch. I am in the process of requesting a patent. Taker will have to sign a non disclosure agreement (name/address). Thanks!
Category: CAD       
Preferred Location: United States

m****rey
 [?]
Sign in to view client's details.
| m****rey
|    United States
Hourly Rate: More than $50 / hr   |  Duration: Not Sure  |  Posted: Apr 09, 2015  |  Ends: 50d, 18h  |   0 Proposals
TabCAT: Tablet-Based Cognitive Assessment Tool We are looking for a software developer to help build a series of tablet-based cognitive and memory tests to support our work in dementia diagnosis and treatment. Our need is immediate, for a programmer to build a set of tests and data collection pages, across a number of different cognitive domains. The project is already up on GitHub:   [obscured]  /UCSFMemoryAndAging/tabcat The framework of TabCAT is pure HTML5, so it can, in theory, run in any modern browser, and writing new tasks requires only basic web programming skills. It uses CouchDB as both its web server and its backend to store transcripts of tasks, which can be retrieved in JSON format. This developer would work under the general guidance of neuropsychologists and neurologists on a team to develop neuropsychological tablet-based tests to be used by examiners with patients in clinic, and by patients at home. The position requires excellent communication skills, and t...
Category: Product Design       
Skills: Javascript, jQuery, HTML5, CoffeeScript       
Preferred Location: United States

m****cat
 [?]
Sign in to view client's details.
| m****cat
|    United States
Hourly Rate: $15 - $20 / hr   |  Duration: 1-2 weeks  |  Posted: Apr 08, 2015  |  Ends: 4d, 18h  |   16 Proposals
Need some assistance in drawing schematics for a office product. Would need assistance in free-hand sketch as well as 3D computer design. Thanks very much.
Category: 3D Modelling       
Skills: Graphic Design       

I****oer
 [?]
Sign in to view client's details.
| I****oer
|    Canada
Fixed Price: $100 - $400   |  Posted: Apr 08, 2015  |  Ends: 19d, 7h  |   9 Proposals
Looking for quality technical M&E engr who fulfil requirements below: -possess minimum qualifications of degree in Science/Engr -possess specific experience in Computational Fluid Dynamics (CFD) and specific proficiency in using the FDS (i.e. Fire Dynamics Simulator) software by NIST or its commercial interface Pyrosim.   [obscured]  /wiki/Computational_fluid_dynamics   [obscured]  /wiki/Fire_dynamics_simulator Job involves using the FDS NIST software (or its commercial interface Pyrosim) to solve problems If you fulfil requirements above, please send (a) samples of previous work (b) resume/ qualifications Price need not be mentioned yet as it will depend on scope of work that will be further discussed if you meet above requirements. Successful candidate will be chosen based on proficiency in using the FDS NIST software and relevant qualifications. Best lowest price will be preferred and will be discussed with shortlisted candidates
Category: Mechanical       

b****rca
 [?]
Sign in to view client's details.
| b****rca
|    Malaysia
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job