Save this Search
     

All JobsDigitalEngineering & Manufacturing

 (24 results)  
Sort by:
  • Posted Date
Engineering & Manufacturing
Fixed Price: Not Sure   |  Posted: Aug 02, 2015  |  Ends: 13d, 16h  |   4 Proposals
Provide the following: 1. Hardware Selection and Bill Of Materials, including manufacturers datasheet, software and or operations manual 2. Provide System Overview and description 3. Provide a general arrangement drawing For the following. Theatrical Revolving Stage Control System using Arduino Micro Controller with DMX512 and Midi Shields as Operator Input Options and CanOpen(CAN) Shield for field device Input/Output interface(CanOpen for Rotary Encoder position, Variable Speed Drive Send/Receive, Digital IO). Overview We want to develop a Control System for our Revolves (Cueing Software and manual control), whereby we can allow our customers to use MIDI tracks and/or DMX512 lighting commands to position etc our Revolve0750 to Revolve10800 revolving platforms and stages. This project is merely to select correct Arduino products, provide all documentation and software of the selected products,as well as a general arrangement drawing and bill of materials of all selected products fo...
Category: Electrical       

t****ant
 [?]
Sign in to view client's details.
| t****ant
|    Australia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 02, 2015  |  Ends: 28d, 15h  |   2 Proposals
International Lighting Consultants (ILC) (  [obscured]  ) is in search of an Experienced Electronics Engineer in the field of Lighting Industry. RESPONSIBITIYS: 1- To design and manufacture LED lighting products. 2- To design the LED drivers per given instructions. 2- Participate in preparation of design and circuitry specifications. 3- Assist in the development of hardware specifications on PCB. 4- Analyze, design, and develop conventional analog and digital circuits as required. 5- Demonstrate and document products and circuits, conventional analysis and standard testing methodologies. 6- Design, implement, for product development. 7- Write and analyze test plans, conduct design tests and evaluate test results. 8- To design, manufacture the components and provide integrated solutions for commercial usage of IC (Integrated Circuits) 9- Prepare and maintain product documentation, including data sheets, instruction manuals, project notebooks, design and test documentation. 10- Provide a...
Category: Electrical       
Preferred Location: India

a****390
 [?]
Sign in to view client's details.
| a****390 *
|    India
Fixed Price: Not Sure   |  Posted: Jul 31, 2015  |  Ends: 11d, 4h  |   14 Proposals
Mechanical/Electrical/Industrial Engineer wanted!! Incredible opportunity to make a difference and make money/equity. BACKGROUND: We have finished wearable technology photo device with a 2 Mega Pixel camera. It is now time to make the 6-8 megapixel prototype/working model. -The 2MP PCB board layout is completed. -We are using BLE or Wifi for the prototype. -You should program micro-controller/processor. -The prototype must be ready to be replicated overseas. Your device will help thousands. -Our Software/App is nearly finished. You are not expected to have software experience. TOOLS: You will receive all of the know-how and components from our previous prototypes. You can get our patent application, that might help problem solve the new prototype. You will also get Computer Generated Graphics and Industrial Design Sketches. TIME FRAME: Approximately 40 hour estimated time to completion. This could be 3 or 4 days of intense work or spread over one and a half weeks. BONUS: Most of...
Category: Mechanical       

c****itz
 [?]
Sign in to view client's details.
| c****itz
|    United States
Fixed Price: Not Sure   |  Posted: Jul 31, 2015  |  Ends: 26d, 4h  |   7 Proposals
This is a simple LCD laser projector that is similar to those seen on weather clocks (see image). I would like to have a stand-alone that can communicate with my iPhone app and other smartphone (android). Features and functionality include: Rotate to shine on any ceiling or wall operate on 2 AAA that will last at least 6 months Will turn off display when disconnected from smartphone Turn on LCD display when connected to Bluetooth device temperature of where device is (optional) Projection feature brightens as room light levels increase Will display Time Temperature and weather - received from smartphone
Category: Electrical       

f****412
 [?]
Sign in to view client's details.
| f****412
|    United States
Fixed Price: $500 - $1,000   |  Posted: Jul 30, 2015  |  Ends: 10d, 6h  |   4 Proposals
Hello, I need help in designing a prototype for water flow meter. (which can be then updated be measure gas too). Following functionalities are required a) Minimum battery consumption b) Tell volume flow in literes in last x minutes , and should store last n readings. c) On request or or automatic convey the information via ipnetwork to a machine.
Category: Product Design       

S****Vai
 [?]
Sign in to view client's details.
| S****Vai
|    India
Hourly Rate: Less than $10 / hr   |  Duration: 1-2 weeks  |  Posted: Jul 29, 2015  |  Ends: 9d, 2h  |   0 Proposals
BID IF AND ONLY IF YOU MEET THE CRITERIA BELOW AND CURRENTLY IN THOSE COUNTRIES COUNTRIES OF STUDY UK, France, Germany, Italy, Spain, UAE and South Africa PROJECT BRIEF Identify users and evaluators of hardware-in-the-loop (HIL) simulation/testing tools among engineers at any level engineering management (lower levels to C-level). CRITERIA 1.Respondent's organization should have embedded controllers/control systems, ECUs, embedded software in design/development or production. 2.Hardware-in-the-loop (HIL) simulation/testing tools" as a tool on embedded projects in past, current or upcoming three year projects in respondent organization. 3. Respondent responsible for using / managing team of HIL users and for selection of HIL tool / testing solutions INDUSTRY Out of 35, we want at least 15 to be from Auto, at least 7 to be from Military/Aerospace, and the rest can be from any industry TARGET Engineers and any level of engineering management (from first...
Category: Other - Engineering &...       

W****mor
 [?]
Sign in to view client's details.
| W****mor
|    Nigeria
Fixed Price: $50 - $200   |  Posted: Jul 28, 2015  |  Ends: 8d, 10h  |   3 Proposals
I need patent drawings for a new dog jacket product that we are going to patent. The drawing should be completed as per the requirements of the US patent office. The file format will be determined by the patent office. There will be two drawings. The first will be an illustration of the jacket and the second will be a illustration of how it functions. The drawings will include at a minimum, type of material, buckle locations, etc.
Category: Product Design       

d****015
 [?]
Sign in to view client's details.
| d****015
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 28, 2015  |  Ends: 8d, 7h  |   6 Proposals
Lead our electrical and controls research and development project activities utilizing outsourced contractors to develop prototypes and manufacture production. Assist with identifying new cutting-edge opportunities for existing and new products including imbedded motor controls and wireless and peripheral equipment.
Category: Electrical       
Preferred Location: United States

m****ike
 [?]
Sign in to view client's details.
| m****ike
|    United States
Fixed Price: Less than $500   |  Posted: Jul 27, 2015  |  Ends: 7d, 14h  |   1 Proposal
Basic Objective: Save and synchronized the captured images with the navigation measurements at the time of camera's exposure. ? The images can be saved in the photos folder in the iPhone. The image should be the whole view and not craped. ? The navigation data can be saved in .txt or .excel file as shown in table below. This file can be send using given email. ? The synchronization can be through the GPS time. Where each image is tagged with GPS time. Then the user will know which navigation epoch is associated with which image throughout the track of image time. Job Description: l
Category: 3D Modelling       

n****bai
 [?]
Sign in to view client's details.
| n****bai
|    Canada
Fixed Price: Less than $500   |  Posted: Jul 26, 2015  |  Ends: 6d, 5h  |   6 Proposals
Hello, I am looking for ideas / approached / protocol suggestions on a wireless device implementation. Please do not bid on this if you do not have working experience with this type of network! I will not pay if you do not have real experience! My application has a master base / router to send out ON and OFF commands to the end devices.Each end device needs to be individually separately controllable. The end device is battery powered and controls a light. There is no real data to send upstream, so one way may be an option. The tricky part ... it needs to support 500,000 devices under the same roof. The protocols I have reviewed thus far will not support this many devices. So I am looking for protocol suggestions and frequency bands. Again DO NOT respond if you do not have real, successful, hands on experience! Thank you PS this device does not have to communicate on or over the internet. Additional information: The network topologies is open. I am able to use wired or wireless re...
Category: Electrical       

r****ics
 [?]
Sign in to view client's details.
| r****ics
|    United States
Fixed Price: Less than $500   |  Posted: Jul 26, 2015  |  Ends: 6d, 5h  |   12 Proposals
Hello, I am looking for additional ideas / approached on a LiPo charger circuit. Requirements: Schematic - can be hand drawn if very legible Single cell LiPo battery (100mah, with no secondary protection) +5V input voltage And the final, most difficult requirement... Total BOM cost of <$ 0.20 USD in volume. This will eliminate the typical LiPo single chip charger solutions. Probably will require discrete components. Additional information: Charging source is a USB port so figure 5V 100ma Over voltage charging protection is required. Deep discharge protection is required. There is a micro already available, so a digital I/O and ADC is available for intelligent control. That can be used to enable a series pass transistor, and ADC to monitor voltage. You would need to provide all scaling / and interface circuitry. Low bat indicator is desirable, can use micro ADC if needed.
Category: Electrical       

r****ics
 [?]
Sign in to view client's details.
| r****ics
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 22, 2015  |  Ends: 9d, 8h  |   16 Proposals
Hi, I'm looking for someone to design and build a small prototype board for a round, small (ideally 30mm diameter or smaller), coin cell powered device. The device would be placed on a horizontal lid and in "sleep mode". When the lid opens, the circuit is activated and a clock is started. After 5 minutes the device would beep once per 30 seconds. After 10 minutes the device would beep once per 5 seconds. Beeping would continue until the lid is returned to its original state (horizontal). Device would then enter "sleep" mode. I found this schematic online which I think would be helpful as a starting point   [obscured]  /5748/timer-with-alarm/. My thought is that an accelerometer would be used rather than a tilt switch for better reliability and smaller size. Buzzer should be relatively audible from one room to another in a typical residence. Once board is designed/built I would create a clamshell housing for it. Thank you for considering.(ID: 7...
Category: Electrical       
Preferred Location: North America

D****pts
 [?]
Sign in to view client's details.
| D****pts
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 22, 2015  |  Ends: 2d, 5h  |   1 Proposal
Need a developer familiar with making wifi and 4g connections between iphones and ipads. Must be familiar with the iOS language and swift.
Category: Other - Engineering &...       
Skills: Bluetooth, Digital Electronics       

C****eLC
 [?]
Sign in to view client's details.
| C****eLC
|    United States
Fixed Price: $500 - $1,000   |  Posted: Jul 21, 2015  |  Ends: 1d, 12h  |   3 Proposals
I need an expert in optics to design and perhaps build a video display that would be fit in sunglasses and not strain the user. The job is very open and the worker is expected to provide innovation as this probably has not been done before. Some ideas that could be implemented are holographic waveguides, nano-pixels, or oleds. Challenges include: -Not blinding the user. -Creating a focus-able object very close to human eyes -Must be able to connect to a streaming circuit. -Must be reproducible (teach to manufacturers, pictures and drawings along the way) All parts will be bought by me. Final product will be shipped to me at the end and the shipping will be paid by me. If final product is patentable the creator may co-patent with me. If the project is a success, creator will be asked to join the company.
Category: Product Design       

K****h10
 [?]
Sign in to view client's details.
| K****h10
|    United States
Fixed Price: Less than $500   |  Posted: Jul 21, 2015  |  Ends: 1d, 8h  |   21 Proposals
I would like to get 3D renderings for the house we're going to be building. The plans are being completed currently. Once they are finished, I will want to get digital images of the exterior and the main living areas of the house. What I'm really looking for would be total exterior renderings. Also, for the interior, I want entry, living, dining, kitchen, and maybe master bed/bath. We would just like to be able to see what the finished product will look like. We would also prefer to have landscaping shown. It would be helpful to have this all done by a designer, so that we can get decorating ideas as well. I will provide the CAD file once the plans are complete. Please view the attached floor plan. I will attach the elevation plans once they are complete.
Category: Interior Design       
Skills: Interior Design, 3D Design, 3D Rendering       

k****ees
 [?]
Sign in to view client's details.
| k****ees
|    United States
Fixed Price: More than $10,000   |  Posted: Jul 21, 2015  |  Ends: 11d, 18h  |   10 Proposals
Candidate must be proficient with neural networks, digital control systems, System Verilog, and cryptography. Semiconductor fabrication experience a plus. Strong knowledge in Linux kernel design, and Android API frameworks. Angular JS a plus, but not required. Desirable Skills: - Linear algebra - Wave physics - no-one over 200 lbs - 3D rendering algorithms - network game engine synchronization - fluent in Japanese or Russian a plus - Be organized. - Be punctual Job Description: Please help us, we don't know what we're doing.
Category: Electrical       
Skills: Electrical Engineering, Electronics       

m****ent
 [?]
Sign in to view client's details.
| m****ent
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 21, 2015  |  Ends: 17h, 37m  |   0 Proposals
Need a developer familiar with making wifi and 4g connections between iphones and ipads. Must be familiar with the iOS language and swift.
Category: Other - Engineering &...       
Skills: Bluetooth, Digital Electronics       

C****eLC
 [?]
Sign in to view client's details.
| C****eLC
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 20, 2015  |  Ends: 6h, 33m  |   5 Proposals
We are in a startup phase of a product related to Digital Photo Frames. We need a person who has excellent working knowledge of Electronics Field, Embedded Systems, Knowledge related to circuits, TFT LCD's, Arduino, Raspberry Pi and such. Experience doesn't matter as long as you know plenty about these stuff. We need someone from Mumbai, India and that's an absolute must! You'll have to sign an NDA before we can move along.
Category: Other - Engineering &...       
Preferred Location: India/Southern Asia

u****eio
 [?]
Sign in to view client's details.
| u****eio
|    United States
Fixed Price: Less than $500   |  Posted: Jul 07, 2015  |  Ends: 2d, 13h  |   18 Proposals
We are seeking to engage a few post graduate engineering students to assist with contributing to draft powerpoint presentations which will form lecture slides. Selection Criteria It is preferred that the applicant: Has completed an Electronics and Communications Degree, Is proficient in the use of English (e.g. IELTS 8.0 in writing) Has excellent writing experience and demonstrates professionalism Is able to communicate regularly and respond quickly online with the project manager Be open to feedback and respond to our corrections and suggestions quickly The Job Students are required to assist our team who are preparing draft slides which will form 12 week sets of lectures for engineering subjects such as Digital Electronics, Electrical Circuits, Dynamics & Control, Engineering Materials, etc. Most of the slides are summary slides, and will only require a few key points listing the material to be included in the slide's final version The short project will take 2 to 4 w...
Category: Electrical       

d****rlo
 [?]
Sign in to view client's details.
| d****rlo
|    Australia
Fixed Price: Less than $500   |  Posted: Jul 07, 2015  |  Ends: 2d, 13h  |   7 Proposals
We are seeking to engage a few post graduate engineering students to assist with contributing to draft powerpoint presentations which will form lecture slides. Selection Criteria It is preferred that the applicant: Has completed an Electronics and Communications Degree, Is proficient in the use of English (e.g. IELTS 8.0 in writing) Has excellent writing experience and demonstrates professionalism Is able to communicate regularly and respond quickly online with the project manager Be open to feedback and respond to our corrections and suggestions quickly The Job Students are required to assist our team who are preparing draft slides which will form 12 week sets of lectures for engineering subjects such as Digital Electronics, Electrical Circuits, Dynamics & Control, Engineering Materials, etc. Most of the slides are summary slides, and will only require a few key points listing the material to be included in the slide's final version The short project will take 2 to 4 w...
Category: Electrical       

d****rlo
 [?]
Sign in to view client's details.
| d****rlo
|    Australia
Fixed Price: Not Sure   |  Posted: Jul 07, 2015  |  Ends: 2d, 2h  |   9 Proposals
I have and FPGA firmware written in verilog. All the features implemented in this verilog code works well and to spec and have been fully tested. The features and functions implemented are about 95% of what we require. What we need help with is to implement the remaining 2 or 3 features, document and deliver the completed source code and other associated details. The FPGA being used is an Altera one.. We will carry out the final testing using our system. Please let me know if this would be of interest to you
Category: Other - Engineering &...       

r****s13
 [?]
Sign in to view client's details.
| r****s13
|    United Kingdom
Fixed Price: $500 - $1,000   |  Posted: Jun 13, 2015  |  Ends: 38d, 0h  |   12 Proposals
Since I'm often overloaded with work, I am looking for a work buddy. Someone I can trust, and share future projects with. I am very specifically looking for someone living in Davao Region, Mindanao, Philippines. I need to travel several times per year to Tagum City for personal reasons. It would be great to get in contact with some engineers in this area, so we can work together on projects more efficiently. These are the skills I'm looking for: - Circuit Design. You know how to desing electronic circuits (analog and digital), and have preferably some experience with a design program like Eagle, Target3001, ... (or anything similar). - Embedded Software. You know how to program a microcontroller (preferably in C). I myself have experience with 16-bit PIC microcontrollers and will soon learn how to use the Cortex M7 (from ST Microelectronics). Experience with one of these would make our cooperation easier. - IoT (Internet Of Things). For future projects, I will need to focus on micr...
Category: Electrical       
Preferred Location: Philippines

k****ier
 [?]
Sign in to view client's details.
| k****ier
|    Belgium
Fixed Price: $500 - $1,000   |  Posted: May 28, 2015  |  Ends: 22d, 3h  |   8 Proposals
The project I invite you to be part of will be the development of the Control / Automation / Mechatronics part of a new RC Helicopter that will be manufactured in Brazil. Besides flying it will perform other functions that must be covered in the system. interested candidates please apply to the job. Thank you
Category: Product Design       
Skills: Electronics, Digital Engineering       

v****tes
 [?]
Sign in to view client's details.
| v****tes
|    Brazil
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job