Save this Search
     

All JobsElectrical EngineerHiring Open

 (79 results)  
Sort by:
  • Posted Date
Hiring Open
Hourly Rate: Less than $10 / hr   |  Duration: 1-2 weeks  |  Posted: 15 minutes ago  |  Ends: 14d, 23h  |   0 Proposals
I need some one who is good in Image processing and having experience with SIFT algo. The basic will be just write the summary of few papers and Algo. More detail will be sent to selected candidate
Category: Electrical       

e****s88
 [?]
Sign in to view client's details.
| e****s88
|    Austria
Fixed Price: $100 - $200   |  Posted: 2h, 23m ago  |  Ends: 14d, 21h  |   1 Proposal
The objective is to design and fabricate one or several circuit board(s) capable of collecting multiple vital signs (ECG, SpO2, Temperature). The design can be a new design or one that is based on an existing reference design if the requirements can be met. If a reference design is used, schematics and demo software/firmware will be provided by the freelancer. The requirements are: - Capable of measuring ECG, pulse oximeter (SpO2), and temperature - Use an embedded 32-bit microprocessor with DSP functionality - Data collection of ECG and SpO2 must be simultaneous or with a low, deterministic latency (<1ms) between ECG/SpO2 samples - Sampling of ECG/SpO2 should occur at a rate higher than 100Hz with a good signal-to-noise ratio - Communication over USB/RS232 to a PC host - Onboard storage for at least 10 seconds of ECG/SpO2 data - Powered by a +5V DC power supply. Preferably a USB port. - A touch or infrared sensor for temperature - Firmware/software program demonstrating the ...
Category: Electrical       

m****sia
 [?]
Sign in to view client's details.
| m****sia
|    United States
Fixed Price: $500 - $1,000   |  Posted: 4h, 28m ago  |  Ends: 14d, 19h  |   0 Proposals
Hi, i am looking for some one who can help & design complete hardware to insert text into cctv video camera. Input : from POS system link shows exact final output.   [obscured]  /watch?v=wzkPFapw88A Thanks.
Category: Electrical       

1****in9
 [?]
Sign in to view client's details.
| 1****in9
|    United States
Fixed Price: Not Sure   |  Posted: 9h, 30m ago  |  Ends: 2d, 14h  |   0 Proposals
Hello, I wanted to know if you could help me. I'm designing a new product that needs an internal power generation. My research has steered me towards "disc type axial flux generators /motors". See attached sketch idea. Basically I need a test bed to prove theory I have based on the contrasts that are given. I can't fully describe the entire design but part of it needs to generate electricity and output it to a outlet, which kind of mimics a typical low voltage wall outlet performance you would find at a normal house. The initial device constraints was to have a cylinder can design with a max diameter of 3.5 -5 inches, and have the device be very light weight, and requiring very little force to spin the axial flux inside. I have not specified a height yet this is all a idea in testing phase. What I'm requesting is a design or instructions to create a test bed in my shop and so I can build and tested it, the shape and design are critical. This is a generator, I will ...
Category: Electrical       

m****478
 [?]
Sign in to view client's details.
| m****478 *
|    United States
Fixed Price: Not Sure   |  Posted: Sep 01, 2015  |  Ends: 1d, 19h  |   27 Proposals
I have a PCB that needs a redesign + improvement. It will need to be coded from scratch but it's a simple device. Looking for someone who can do it within 2 weeks as it's a priority job.
Category: Electrical       

t****gak
 [?]
Sign in to view client's details.
| t****gak
|    Australia
Fixed Price: Not Sure   |  Posted: Sep 01, 2015  |  Ends: 13d, 11h  |   8 Proposals
Background: We are currently using the nrf51822 as a proximity tag that triggers when the beacon (client) is within a specified distance from the host (transceiver). Scope of Work: Develop firmware to do trigger proximity alarms: 1. In a specified distance from the host transceiver 2. In a specified location from the host transceiver (e.g. front, left, right or back)
Category: Electrical       

c****gjt
 [?]
Sign in to view client's details.
| c****gjt
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 31, 2015  |  Ends: 27d, 18h  |   17 Proposals
We're looking to build a motorized scooter with a cart in the back. It needs to be powered by an electric motor. The handlebar should have a real-time battery life indicator. It should also have some tasteful LED lights. It must have several attributes: 1. Foldable / compact 2. Long battery life 3. Stable (good balance) We need mechanical drawings for a prototype. See attached for a SketchUp file and PNG. Should be fairly simple? Let's chat.
Category: 3D Modelling       

j****ein
 [?]
Sign in to view client's details.
| j****ein
|    United States
Fixed Price: Not Sure   |  Posted: Aug 31, 2015  |  Ends: 12d, 15h  |   12 Proposals
Need an EE to review circuit diagram and assist in identifying/specifying referenced missing components and any others that may not be referenced in order to complete/enhance prototype design. Project involves small brushless electric motors used in the hobby industry for radio controlled helicopters, drones, planes, cars, etc. Please inquire directly and I'll share diagram after an NDA is executed.
Category: Electrical       
Skills: Electrical Engineering, Electronics       

c****ko1
 [?]
Sign in to view client's details.
| c****ko1
|    United States
Hourly Rate: $15 - $20 / hr   |  Duration: 4-6 months  |  Posted: Aug 31, 2015  |  Ends: 4d, 10h  |   32 Proposals
We are looking for an individual or company to manage a local SEO and Social Media Campaign for electric bicycle shop. The company is building its product line on the Shopify platform. The website is currently operational but has not yet been officially launched, listed or optimized. Ideally, we'd like to establish a monthly retainer and payment schedule to include: 1. Google Analytics monitoring and reporting 2. Google adword campaign(s) 3. SEO organic search listing and ranking strategy. 4. Facebook and Google + page development and links 5. Local business links and postings 6. Back links and traffic monitoring The ideal candidate would be a US resident, and full-time freelancer with his/her own consulting company and desire to grow a personal client database of small businesses. Partners have in depth experience with Google analytics, SEO strategies and tools used to improve rankings. This is a startup company with a retail brick and mortar opening of October 10, 2015. Th...
Category: Search Engine...       
Preferred Location: North America

d****ogy
 [?]
Sign in to view client's details.
| d****ogy
|    United States
Fixed Price: $500 - $1,000   |  Posted: Aug 31, 2015  |  Ends: 57d, 9h  |   10 Proposals
We are looking for a hardware/software developer (mechanical/electronic engineer) who can implement a complete custom project for a GPS/GSM/GPRS tracking unit for motorcycles. The units purpose is to gather GPS data and other data (live tracking, speed, distance and other common tracking features) and track the information back to a web application and alerts in mobile phone. SKILLS: Schematic Circuit Diagram, Circuit Design, Electrical Drawing, Electrical engineering, Electronic Design, Electronics, Embedded C, Embedded Systems, GPS Development, PCB Design If you DO NOT have a prior experience using GPS/GSM/GPRS module in vehicle tracking, please do not bid on this project, we would prefer to see prior work before we award the project. REQUIREMENTS: 1. Sending GPS co-ordinates to our server (GPS/GPRS) and/or SMS alerts for motion. Tracked using IMEI; 2. Have a rechargeable lithium battery. Basing your experience you can choose the best one. Long life battery is appreciated; 3. Must...
Category: Product Design       

i****ide
 [?]
Sign in to view client's details.
| i****ide
|    Brazil
Fixed Price: $150 - $400   |  Posted: Aug 31, 2015  |  Ends: 12d, 8h  |   7 Proposals
Looking for quality practicing M&E engr who fulfils requirements below: -possess minimum qualifications of degree in M& E Engr -possess practical experience in building plans and solutions This is small project that involves drawing building plans and offering solutions to problems + preparing report If you fulfil requirements above, please send (a) samples of work done for previous clients (b) resume/ qualifications/practical work experience
Category: Mechanical       

b****rca
 [?]
Sign in to view client's details.
| b****rca
|    Malaysia
Fixed Price: $500 - $1,000   |  Posted: Aug 31, 2015  |  Ends: 12d, 5h  |   15 Proposals
Our firm has recently acquired a 3,000 hectare land in Sub-Saharan Africa. We would require an electrical engineer (or equivalent) to provide us with a 5 page presentation which includes the following details: 1. The radiation levels on the land (we have the coordinates) 2. Distance from the grid; possible solutions to infrastructure issues that may arise 3. Expected number of panels required to get the highest returns 4. Expected costs (approximate) 5. Expected level of investment required.
Category: Electrical       

o****dba
 [?]
Sign in to view client's details.
| o****dba
|    United Kingdom
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 30, 2015  |  Ends: 11d, 15h  |   2 Proposals
We are a cellular repair company that refurbishes phones in the USA. During our time sometimes we break handsets and need help diagnosing the issue and know how to fix it. I am looking for someone that can be on call for us to chat with on Skype or other methods to ask questions about repairs.
Category: Electrical       

c****ess
 [?]
Sign in to view client's details.
| c****ess
|    United States
Fixed Price: Not Sure   |  Posted: Aug 30, 2015  |  Ends: 11d, 11h  |   4 Proposals
Dear Elancers, I'm was looking for buying a Honeywell resistor board (Honeywell-221508A) but unfortunately I couldn't find it and it's out of stock in most market areas. So I decided to make it by my self which I think it's not very complicated. It's just an analog card with mosfet. I'm looking for someone who help me for building this resistor board and give me some advice for the board. Please pay attention that I only need your advice and help for this so it's not a hard job. in the attachment you will find the pic of the board. Looking forward to hearing from you, Thanks,
Category: Electrical       

h****del
 [?]
Sign in to view client's details.
| h****del
|    Italy
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 30, 2015  |  Ends: 11d, 9h  |   10 Proposals
I have a small group of electrical prints from an aircraft. I need a particular electrical circuit extracted from all of this and drawn into a picture that we can build off of. If this picture is hand drawn, I'm ok with that. I just need it done correctly. I need this done today. Thanks!
Category: Electrical       

t****oyn
 [?]
Sign in to view client's details.
| t****oyn
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: Aug 30, 2015  |  Ends: 11d, 3h  |   15 Proposals
We have customers that will want a shoe shine. They will sit on one of those chairs to have a shoe shine. Each treatment is about 10-15 min. There will also be a camera on top of the chair. At the end of the treatment (shoe shine), the customer will pay the operator who did the shoe shine for him. We will ask the operator to key in in the store system the transaction and issue a ticket At the end of the day, to cross check that the operator did not do any treatment without declaring it (ie stealing), we will cross check number of transactions entered in the store system (that issued at ticket), the number of times the seat has detected we had a customer for treatment, and the number of customers detected via the camera. We are looking at an electronic application that can 1) Count the number of customers who spent more than 5min on a seat 2) Detect from the camera images the number of customers who had the service during the day 3) Notify the store owner if any discrep...
Category: Other - Engineering &...       

l****che
 [?]
Sign in to view client's details.
| l****che
|    United Arab Emirates
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 29, 2015  |  Ends: 10d, 15h  |   23 Proposals
Design a simple farm produce sorting machine. I have already built a rough prototype, but now need a properly engineered, and built machine, for showmanship purposes. The machine is all mechanical expect for some electrical motors.
Category: Product Design       
Preferred Location: Canada

M****y11
 [?]
Sign in to view client's details.
| M****y11
|    Canada
Fixed Price: Not Sure   |  Posted: Aug 29, 2015  |  Ends: 10d, 10h  |   9 Proposals
We are implemeting CAD Standards in our studio. We currently have AutoCAD LT, and need to streamline toggling layer states for working on our architectural plans. In my previous firm, we had a full AutoCAD license, and had a Macro/ Lisp custom toolbar ribbon that we loaded for customization. My understanding is that this is not possible with the LT version and am researching what the best alternative is. We currently create Layer States for individual projects which is time consuming and inefficient in a growing studio and are open to any proposed solution similar to a custom ribbon. We can provide a spreadsheet and a CAD drawing that identifies all layers. The spreadsheet will also identify which layers should be turned on or off depending on which plan we would be working on. We would also need to lock all off layers in order to enforce standards. We will need to have separate layer states for the following plans. - Construction Plan - Reflected Ceiling Plan - Electrical Plan - ...
Category: CAD       
Skills: AutoCAD       

m****dsi
 [?]
Sign in to view client's details.
| m****dsi
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 28, 2015  |  Ends: 9d, 13h  |   3 Proposals
I am designing a universal card. See   [obscured]  /wiki/Universal_card. I would like to enable it to work in a wide range of readers. But as a small company it is expensive to set up an extensive testing program to do this. I am looking for an electrical engineering consultant with in depth knowledge about dip and motorized magnetic stripe readers that could guide us in our development. English speaking a requirement.
Category: Electrical       

t****hpe
 [?]
Sign in to view client's details.
| t****hpe
|    United States
Fixed Price: Not Sure   |  Posted: Aug 28, 2015  |  Ends: 9d, 12h  |   11 Proposals
we are developing a Fan for the use in the entertainment industry. We need a fan controller that will do the following Very quiet must be a VFD design 100v - 240 v input 120v output motor PSC 1/4 hp to 1 hp Control by pot and DMX 512 pro Small size durable inexpensive to fabricate
Category: Electrical       

j****134
 [?]
Sign in to view client's details.
| j****134 *
|    Canada
Fixed Price: Not Sure   |  Posted: Aug 28, 2015  |  Ends: 16d, 9h  |   10 Proposals
Professional Lighting Consultants August 28, 2015 Our company has been successfully installing commercial energy savings lighting retrofits in San Diego since 2012. Businesses that have had their lighting systems updated by our company have seen electricity savings in the order of 30-80%, and the entire cost, financed interest free, has been paid for from the monthly savings. We specialize in reducing energy costs and improving lighting through energy efficient lighting retrofits of all types of commercial buildings-parking lots, warehouses, factories, retail establishments, restaurants, schools and offices. Our energy efficient lighting systems drastically reduce lighting bills while transforming the current lighting system into one that offers much improved lighting by showing colors better, looking cleaner and making your facility safer and more pleasant to work in. There are no out of pocket expenses to complete the project- a combination of utility provided rebates an...
Category: Lead Generation       
Skills: Direct Marketing, E-mail marketing       
Preferred Location: North America, Western Europe, Eastern Europe

j****and
 [?]
Sign in to view client's details.
| j****and
|    United States
Fixed Price: About $2,500   |  Posted: Aug 28, 2015  |  Ends: 11d, 14h  |   7 Proposals
We need a Radar system developed that is camera based. The project will require the freelancer to build a pan, tilt and zoom solution+ the detection and tracking software. Operational Specification 1)System scans the sky looking for planes (Any Kind) 2)Detect at least 10 planes at the same time 3)Assign Ids to all detected plane (  [obscured]  /watch?v=LNaL58GRou4) Something like this but for the planes. 4)Track the plane selected by the operator 5)The software needs to calculate the GPS location of the plane + altitude + Speed + Distance of the plane from the camera + expected path 6)The system will need to identify the planes by make and name 7)Have a traditional radar GUI + Show the plane( that is being tracked) on Google Maps 8)Detection range of 5Km 9)Required accuracy rate of +-10m
Category: Product Design       

a****ski
 [?]
Sign in to view client's details.
| a****ski
|    Canada
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 27, 2015  |  Ends: 8d, 19h  |   35 Proposals
I've got a concept for a new electronic product, for which I would like some assistance building a functional prototype. This includes: - Initial review and feasibility - Electronic product design - Prototype design and construction Contact me with examples of your work and rate information. If you have any questions, let me know. Thank you.
Category: Electrical       

y****act
 [?]
Sign in to view client's details.
| y****act
|    United States
Fixed Price: Not Sure   |  Posted: Aug 27, 2015  |  Ends: 8d, 11h  |   12 Proposals
Need to develop an LED bulb with backup battery inside which will activate itself when the power goes off. No manual switch , no remote, must turn automatically on when the power goes off and if the wall switch is on. Must be able to turn off using wall switch. 900 lumens of light needed. Need 10-14 hours of runtime in good lighting in emergency mode when power goes off.
Category: Electrical       

n****imd
 [?]
Sign in to view client's details.
| n****imd
|    United Arab Emirates
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job