Save this Search
     
Sort by:
  • Posted Date
Posted: Within 7 days
Hourly Rate: $20 - $30 / hr   |  Duration: Not Sure  |  Posted: 48 minutes ago  |  Ends: 14d, 23h  |   0 Proposals
QA/QC Project Engineer Syntegra Solar, AG Act as Owner's Engineer in the entire duration of the project. Responsible for the strict implementation of construction as per Issued for Construction (IFC) drawings. In-charge of the Quality Controls and Assurances of incoming goods(IGC) used for the project, third-party inspections(3I), milestone inspections(MI) of every accredited contractors daily construction schedule. Recommends necessary materials and equipment testings. Maintain records of constructions for monitoring purposes and punch listing. Technical Engineer Orient Star International 1. Primarily to sell substation transformers used for ground mounted and overhead design. 2. Receive customers Request for Quotation (RFQ) and prepares necessary documents. 3. Perform site testing (winding test, turns ratio, insulation tests, etc.) prior to transformer commissioning as well as rectification if needed. 4. Prepare Technical Submittals for Client/Consultants approval. 5. Coordinates ...
Category: Electrical       
Preferred Location: Philippines

M****k35
 [?]
Sign in to view client's details.
| M****k35
|    Philippines
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: 1h, 42m ago  |  Ends: 14d, 22h  |   0 Proposals
I need a oral chinese translator Jun 10-11, in Tulsa OK. I hope you are good at manufacturing especially in lubrication and industry design. We can negotiate the price in person. Anny
Category: Mechanical       

2****NNY
 [?]
Sign in to view client's details.
| 2****NNY
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: 1h, 46m ago  |  Ends: 2d, 22h  |   6 Proposals
Need MEP design and drafting documents for construction for two buildings. Please provide questions if needing more info before a specific proposal can be provided. Would like a provider with familiarity of US MEP standards. ****This is a previous post, I had forgotten to attach the drawings.****** 2009 International Building Code 2009 International Energy Code 2009 International Fire Code 2009 International Fuel Gas Code 2009 International Mechanical Code 2009 International Plumbing Code 2009 International Residential Code 2009 International Property Maintenance Code 2011 National Electric Code
Category: Mechanical       
Preferred Location: United States

s****ina
 [?]
Sign in to view client's details.
| s****ina
|    United States
Fixed Price: Less than $500   |  Posted: 3h, 40m ago  |  Ends: 14d, 20h  |   0 Proposals
I want to interface 40 Kg Load cell interfacing with Arduino for 1 gram accuracy.Please send your proposal with detailed explanation about this project. Load cell: CZL 601,Precision : 0.02
Category: Electrical       

S****ies
 [?]
Sign in to view client's details.
| S****ies
|    India
Hourly Rate: Less than $10 / hr   |  Duration: 1-2 weeks  |  Posted: 6h, 24m ago  |  Ends: 14d, 17h  |   1 Proposal
Programming firmware for Atmel SAM D21 microcontroller. Following functions have to be covered: - basic firmware for SAM D21 clock, ports, etc. - DMX receiver compliant to DMX512 protocol. - 2x16 character LC display vie SPI - 4 buttons for control the menu at LCD - The DMX start address can be configured via buttons / LCD - 8 PWM outputs, with 8 respective 16 bit. The TCC unit of D21 have to be used. The circuit is developing right now by ourselves. The challenge will be to start the programming without final board because this project is under time pleasure. It may be ture that the firmware have to be programmed without the final PCB!
Category: Electrical       
Skills: C, ARM, Atmel AVR, Firmware Engineering       

e****mbH
 [?]
Sign in to view client's details.
| e****mbH
|    Germany
Fixed Price: Not Sure   |  Posted: 7h, 40m ago  |  Ends: 14d, 16h  |   5 Proposals
AIM - To make circuit using sonar(distance sensor) as input which will be deployed in fast moving vehicle and to take output in form of vibration and display Objective - Sensors should be sensitive with range of .1m to 3 m. Need to know the options with respect to quality and cost Circuit should be designed with input from sonar and output as vibration(closer object gets, more vibrant it should become), and color changing LED (changing color from red to yellow to green) The power to be supported by solar films as well from external battery. The communication should be wireless for LED display as well for vibration module if possible Kindly let me know if more details are required. Thanks and Best Regards
Category: Electrical       
Skills: Integrated Circuits, Electronics       

N****nGR
 [?]
Sign in to view client's details.
| N****nGR
|    India
Fixed Price: $50 - $80   |  Posted: 8h, 15m ago  |  Ends: 1d, 15h  |   2 Proposals
need expert in math - communication engineer in order to derive some formulas more details as in attached file.
Category: Electrical       

m****lab
 [?]
Sign in to view client's details.
| m****lab
|    Jordan
Hourly Rate: $20 - $30 / hr   |  Duration: 3-4 weeks  |  Posted: 14h, 42m ago  |  Ends: 29d, 9h  |   0 Proposals
Requirements: 1) licensed mechanical engineer 2) experience developing washing machines. U.S.A only
Category: Mechanical       

k****016
 [?]
Sign in to view client's details.
| k****016
|    United States
Fixed Price: $5,000 - $10,000   |  Posted: 15h, 31m ago  |  Ends: 29d, 8h  |   3 Proposals
I am looking for an licensed mechanical engineer in the U.S only, preferably in California, that has a proven record of developing blueprints for appliances: such as washing machines and dishwashers. If you worked for a company like Whirlpool, this is the job for you.
Category: Mechanical       
Preferred Location: United States

k****016
 [?]
Sign in to view client's details.
| k****016
|    United States
Fixed Price: Less than $500   |  Posted: 19h, 11m ago  |  Ends: 14d, 4h  |   4 Proposals
i need a complete vedio tutorial with examples of how to use STM32 nucleo F411RE with sensor shield to and an open source compiler to build the following: 1- RTOS concepts and overall explanation explained for first time user with small embedded system back ground. 2- Setup, IDE ,library and compilation instruction 3- example: 3 threads for LED with full explanation 4- Example: multi threads for thread1: Buzzer song thread2: two dc motor with encoders that turns 10 turns, then stops, 5 then stops, then keep repeating. 5- Example : thread1: Stepper motors controlled by 2 buttons for up/down direction control (half rotation per press) thread2: 2 servo motors controlled by 2 IR sensors thread3: RTC serial printing current time on terminal. 6- other important examples Important notes: * All vedios should be private and in english. * All documents should be in .doc formal * money will be released after making sure all information given is complete and correct. * i will a...
Category: Electrical       
Skills: Electronics, Embedded Systems, Robotics, RTOS       

K****RDA
 [?]
Sign in to view client's details.
| K****RDA
|    Kuwait
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: 21h, 11m ago  |  Ends: 14d, 2h  |   9 Proposals
I'm looking for a programmer to help me write code for an arduino run circuit. When a button is pushed, two things happen; 1. one led lights, then dimm's down within a 1/4 of a second. 2. the next led lights, then dimm's down within a 1/4 of a second. I will be using super bright led's, like the ones shown here;   [obscured]  /products/531 ill be looking to make this gimmick pretty small, but enough current to supply the led's. To further understand my requirements I would be happy to discuss through Skype or google hangout. This job is also a trial employment; as further electronic products will be needed in the future. If there's any more information you require please don't hesitate to ask.
Category: Electrical       
Skills: arduino programming       

s****oup
 [?]
Sign in to view client's details.
| s****oup
|    United Kingdom
Fixed Price: Less than $500   |  Posted: May 28, 2015  |  Ends: 13d, 22h  |   1 Proposal
I require a board that interface to the MLX90621. The microcontroller needs to be Cortex M4. Software need to be written to prove the design works and capturing thermal data.
Category: Other - Engineering &...       

g****010
 [?]
Sign in to view client's details.
| g****010
|    New Zealand
Fixed Price: Less than $500   |  Posted: May 28, 2015  |  Ends: 13d, 22h  |   5 Proposals
Two boards. I require a board to interface to HopeRF RFM95W. The antenna needs to be small chip antenna. The board needs to be compact. The second board requires is based loosely on the Mediatek Linkit Assist 2502. The board design requires only the processor and the GPS. Both jobs should be easy for someone that has RF experience and board design. Both boards need to be tested to proof that it is working. Both boards need to be designed in Altium.
Category: Electrical       

g****010
 [?]
Sign in to view client's details.
| g****010
|    New Zealand
Fixed Price: $1,000 - $5,000   |  Posted: May 28, 2015  |  Ends: 13d, 17h  |   15 Proposals
We are looking for an MEP engineer who can work with us on a project to project basis for production of detailed MEP drawings. The details to include HVAC and ventilation drawings with heat load calculation Fire Fighting drawings Fire Suppression system details Water supply and drainage drawings Electrical drawings with circuit and Load Distribution schedule Detailed BOQ for contractor Please revert back with your details of charges, time frame required etc.
Category: Mechanical       

h****nid
 [?]
Sign in to view client's details.
| h****nid
|    United Arab Emirates
Hourly Rate: $20 - $30 / hr   |  Duration: 3-4 weeks  |  Posted: May 28, 2015  |  Ends: 13d, 17h  |   12 Proposals
General This project has the ability to send GPS data to a central server using GSM over TCP/IP. There will be some input to control and output for activate ex. a relay. As MCU platform the ATMEL 328p has been used running 8MHz. It is essential the program use absolute minimum power consumption. Programmer need to know how to set MCU, GPS and GSM in sleep and standby mode. The hardware contains a 3 axes sensor for Tilt, acceleration and movement, which will be part of the software. The hardware is driven by a 400mA 3v7 battery. All documentation will be available with direct technical support from hardware supplier.
Category: Electrical       

s****ics
 [?]
Sign in to view client's details.
| s****ics
|    Denmark
Fixed Price: $1,000 - $5,000   |  Posted: May 28, 2015  |  Ends: 13d, 13h  |   4 Proposals
Urgently need a highly motivated, intelligent, flexible freelancer SCADA/Power control systems researcher. Who can carry out research on SCADA vulnerability. he/she must have the following traits: 1:- Strong Programming Capability 2:-Strong Mathematical Background 3:-Strong Research Background (highly desired)
Category: Electrical       

j****113
 [?]
Sign in to view client's details.
| j****113
|    Pakistan
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 27, 2015  |  Ends: 13d, 12h  |   3 Proposals
Charity open water swim 8/15/15. Need waterproof individual ankle or wrist timing device for participants swimming 2.4 mile race in 70 degree lake. Start and finish line same location.
Category: Electrical       

t****tis
 [?]
Sign in to view client's details.
| t****tis
|    United States
Fixed Price: Not Sure   |  Posted: May 27, 2015  |  Ends: 13d, 12h  |   13 Proposals
Research firm possess a design for a voltage controlled mosfet switch. We seek an experienced subcontractor to receive our build package (schematic, parts list and component connection paths) to produce a professional quality PCB complete with the working and tested circuit for delivery to us. Job includes: a) produce a PCB layout based on a circuit schematic provided by Research firm. The circuit has less than 25 components - all components are through hole style. See attached schematic, minus part numbers. b) Order parts to populate the PCB based on parts list provided by Research firm. c) Assemble, solder and test the populated PCB to assure proper on/off function. This voltage controlled mosfet switch turns on at 550vdc and off at 220vdc. Applicants responding to this job offer must have a power supply capable of operating at these voltages in order to test functionality of the circuit. If this 1st job experience goes well, there are other opportunities which may be discussed....
Category: Electrical       
Preferred Location: United States

I****ing
 [?]
Sign in to view client's details.
| I****ing
|    United States
Hourly Rate: $40 - $50 / hr   |  Duration: Not Sure  |  Posted: May 27, 2015  |  Ends: 13d, 11h  |   2 Proposals
Need expert who working on HDMI and understand everything in deep. ready to start work now we need expert in audios
Category: Electrical       

i****t41
 [?]
Sign in to view client's details.
| i****t41
|    Pakistan
Fixed Price: Not Sure   |  Posted: May 27, 2015  |  Ends: 28d, 10h  |   0 Proposals
- Must be experienced in Purchasing function - Graduate of Mechanical Engineering or Electrical Engineering - Male or Female - Computer-literate - 18 to 35 years of age - Must be willing to work in Cabuyao, Laguna - Must be willing to travel
Category: Other - Sales & Marketing       
Skills: Sales, Purchasing       
Preferred Location: Philippines

c****wer
 [?]
Sign in to view client's details.
| c****wer *
|    Japan
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job