Save this Search
     
Sort by:
  • Posted Date
Fixed Price: About $185   |  Posted: Dec 10, 2015  |  Closed  |   1 Proposal
I own a sign business in Albuquerque NM and am required to pull permits for most of my job installations. A large portion of my work includes channel letters. These are the individual letters that businesses have in their storefronts and light up at night. I have all licenses necessary to install these type of signs. I have no problem pulling permits in the city i live in. The problem i have is i can't pull permits in a nearby county because they specifically need engineer drawings of how the sign will be installed to the building wall. They specified i need an engineer with an official engineer stamp on all drawings. The current permits i provide the city i live in contain a drawing of how i will install the sign to the wall, but since i'm not an engineer they cannot accept my drawings. I can provide these drawings as a guide of what i need. I hope i explained myself correctly. Hope there is someone who can help me. Thank you!
Category: Other - Engineering &...       

d****gns
 [?]
Sign in to view client's details.
| d****gns
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: Dec 09, 2015  |  Closed  |   10 Proposals
Hi All, I'm looking for a translator who can translate a technical manual. There are about 41.000 words and we need it by 7 January. It's a description of procedures for operation, handling, testing, and maintenance. Thank you!
Category: Other - Engineering &...       

****
 [?]
Sign in to view client's details.
| Client
|    Netherlands
Hourly Rate: $10 - $15 / hr   |  Duration: 1-2 weeks  |  Posted: Nov 25, 2015  |  Closed  |   1 Proposal
the task, is to determine if a have a pointy rod charged at 10.000 volts, how far would the nitrogen atoms in the air around it repel from it in air conditions, the electric field would change its polarity every 16ms or 60hz AC signal, im triying to calculate repulsion forces between two charge points but i have to bottlenecks. 1 How to calculate columbs for a point charge if the only thing i have is V 2 How to calculate the repulsion speed and time it would be affected the single nitrogen atom so i can say for example that in this 16 ms of potential the particle would fly 1 km away or so.
Category: Other - Engineering &...       

h****nas
 [?]
Sign in to view client's details.
| h****nas
|    Colombia
Fixed Price: Less than $500   |  Posted: Nov 24, 2015  |  Closed  |   2 Proposals
Need a technical report in supply management and manufacturing. Need to simplify and implement 2 models of the marketing department from journal papers and compare it with the traditional models. Attached is a sample of what is expected.
Category: Other - Engineering &...       

m****nja
 [?]
Sign in to view client's details.
| m****nja
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Nov 15, 2015  |  Closed  |   16 Proposals
We are doing a demo for a major tolling agency in the US to test our tolling cell phone app. We want to build a secondary detection method at each toll gantry using device to device technology. We need a prototype build for the test to transmit 200 ft. If the test is successful we plan to roll out nationally.
Category: Other - Engineering &...       

m****tfc
 [?]
Sign in to view client's details.
| m****tfc
|    United States
Fixed Price: Not Sure   |  Posted: Nov 11, 2015  |  Closed  |   13 Proposals
We are a company in Denmark who is looking for a manufacturer which can pass on developing our product. The product should be able to charge an iPhone & Android. The concept is a one time use and therefore low cost high priority. We have the Electrical design and concept design mechanical design ready and prototypes. We are looking for a company to develop mold and mass produce our product... More info. contact us
Category: Other - Engineering &...       
Skills: Electrical Engineering, Electronics       

M****MoG
 [?]
Sign in to view client's details.
| M****MoG
|    Denmark
Hourly Rate: $40 - $50 / hr   |  Duration: Not Sure  |  Posted: Nov 10, 2015  |  Closed  |   6 Proposals
I need a person to design and specify electrical components in a mechanical small lift system to aid the handicapped in reaching objects for a setting position. Knowledge of electric motors for lifting Knowledge of synchro and servos systems to provide control and feedback during lifting process Knowledge interlocks to meet safety requirements and provide user with stable lift platform
Category: Other - Engineering &...       
Skills: Electrical Engineering       

t****ech
 [?]
Sign in to view client's details.
| t****ech *
|    United States
Hourly Rate: $30 - $40 / hr   |  Duration: 1-2 weeks  |  Posted: Nov 06, 2015  |  Closed  |   6 Proposals
Controller: 250 v DC, brush, PMDC motor, variable, reversible, analog, open loop, compact. V out ? 0?230 Vdc V source ? up to 450 vdc I operation ?< 10 A Protection features: Short circuit Overcurrent >12 A Over voltage >550 v dc Over heat > 60-80C Operation temperature - -20C ? +40C Operation altitude >6000 m above sea leval Reverse motor: power ON at out ~100 V instantaneous toggle switch of h-bridge control. Continuous operation power 1.5 kW at 220 vdc Prototype. Similar controller based on Copley 432, ( [obscured] /MC/Drive/DCbrush_less.html#4xx), <225 Vdc source (discontinued, unavailable) with all above features was used in described conditions for 15 years - never failed. For high voltage (400 Vdc) application similar controller was built around 100A40 Advanced Motion Control ( [obscured] -m-c.com/products/analog_brush.html?tab=3) servo amplifier. It is too big for current project. General idea of new controller: PWM controller + H-bridge d...
Category: Other - Engineering &...       
Preferred Location: United States

z****nov
 [?]
Sign in to view client's details.
| z****nov
|    United States
Hourly Rate: $40 - $50 / hr   |  Duration: 3-4 weeks  |  Posted: Nov 03, 2015  |  Closed  |   0 Proposals
AACL is looking for a reliability engineer to assist with an aerospace systems reliability project, specifically, putting together a Reliability Program Plan in accordance with ANSI/GEIA-STD-0009.
Category: Other - Engineering &...       
Preferred Location: United States

j****acl
 [?]
Sign in to view client's details.
| j****acl
|    United States
Fixed Price: Not Sure   |  Posted: Oct 24, 2015  |  Closed  |   2 Proposals
Hello, everyone! This project requires a technical professional with an experience in TURKEY/IRAN regulations for construction OR petroleum/oil and gas development, production, fire/occupational safety Or other similar technical fields, etc. You can be an Engineer, an Architect, Technical Designer or a Government Worker. Your expertise shall be 1. Know the approval process (i.e. for construction) 2. know what regulations are used and required. 3. to be able to collect these regulations or know where to find them. Please place any bid just to be able chat. We will then discuss the details. Thank you.
Category: Other - Engineering &...       

****
 [?]
Sign in to view client's details.
| Client
|    United States
Fixed Price: Less than $500   |  Posted: Oct 22, 2015  |  Closed  |   3 Proposals
Hello, I just completed drilling and installation of a water well/borehole for a client and he now requests me to provide a declaration of conformity for all installed equipment. Below is a list of what was installed: 1) Steel casing Shedule 40, 6 5/8" API steel casing 2) Johnson Stainless steel Screens, same as ones used in oilfield and water industry 3) Electrical Cables, 6mm PVC insulated cables 4) Lowara Submersible pumps 7.5HP 5) Plastic tigre pipes 50mm diameter 6) Panel with Lovato electrical components To make a declaration of conformity, i require the standards for each of these or as many as i can get for all listed categories. Manufactures are listed i.e Johnson screens, Lowara pumps, Tigre Pipes e.t.c Need urgently. I am currently located in West Africa - Nigeria. Declaration of conformity is for this region, however, i expect the standards to be universal world wide. I.e casing imported from USA, Lovato Pumps - Italy and so on. Regards Fola
Category: Other - Engineering &...       

f****ter
 [?]
Sign in to view client's details.
| f****ter
|    Nigeria
Hourly Rate: More than $50 / hr   |  Duration: Not Sure  |  Posted: Oct 21, 2015  |  Closed  |   10 Proposals
Dear fellow colleagues, We are a small group of engineers currently working on a project around control systems and sensor fusion involving Double Integration and Dead Reckoning. Currently, we are looking for experts in these areas to assist and advice us in our current project. We intend to work with these individuals on an hourly basis whereby we discuss and solve challenges and problems we face in our projects, specific to the areas mentioned. Some key challenges we face are: - Double integration to generate real world position values from acceleration and velocity values - Kalman Filter Design - Matlab Integration - 3D GUI Position Values Plotting - Real time instant feedback of sensor data through movement If you are familiar with these areas, we would love to hear from you and looking forward to working together. Warmest regards, Ming
Category: Other - Engineering &...       

K****e_M
 [?]
Sign in to view client's details.
| K****e_M
|    Australia
Fixed Price: $500 - $1,000   |  Posted: Oct 09, 2015  |  Closed  |   2 Proposals
We need: 1) 1 logic diagram 2) 4 loop diagram 3) 1 SIL calculation You have to use AUTOCAD for the point 1) and 2). The SIL calculation will be made: . on the basis of the architecture of the system . based on the data of failure of individual components contained in the documents and attachments . using the analysis technique known as Fault Tree Analysis using a reliability evaluation tool The specifications of the work are in the file : .LogicDescription.zip Examples are in the file: Logic-and-Loop-Diagrams.zip Note: we have 4 identical BMS, but is sufficient have only un logic diagram and un SIL calculation for all BMS It is necessary to indicate the development time
Category: Other - Engineering &...       

r****i46
 [?]
Sign in to view client's details.
| r****i46
|    Italy
Fixed Price: $5,000 - $10,000   |  Posted: Oct 08, 2015  |  Closed  |   26 Proposals
Electrical Engineering We are a San Francisco startup of Big data and Internet of thing IOT company looking for partners in the fallowing : Engineering management, for IOT systems Embedded system, Zig bee, Bluetooth Low Energy, Robot prototyping, Projects Prototype and Testing: Identity & Access Management, Home Automation, Smart Logistics, Environment Monitoring, ETC Design and fabricate of custom PCBs and enclosures. Looking for long term partner for our IoT electronic idea from concept to reality.
Category: Other - Engineering &...       

T****e15
 [?]
Sign in to view client's details.
| T****e15
|    Portugal
Fixed Price: Not Sure   |  Posted: Oct 08, 2015  |  Closed  |   5 Proposals
Preliminary study for: Shrink sleeve applicator: floating mandrel, single head, hourly production <200 ppm, variable product dimensions. Shrink steam tunnel: versions with single stage, 2 or 3 or 4 stages, stage 600/700mm long, hot steam shrink, gas steam generator and electrical steam generator. I'm looking for a complete (mechanical and electrical) preliminary study for a shrink sleeve applicator + shrink steam tunnel. I'm looking for: Shrink sleeve applicator - preliminary 3D modelling and assembly to define technical solutions and materials (I can supply all the electrical/electronic specs and their 3D models). - no drawings at this step Shrink steam tunnel - preliminary 3D modelling and assembly to define technical solutions and materials. - preliminary electrical/electronic study and scheme to define technical solutions and bill of materials. 3D modelling /assembly: - PTC CREO 3.0 prior choice - Autodesk Inventor >2014 second choice - other 3D cad to be agreed Electrical...
Category: Other - Engineering &...       

m****gdi
 [?]
Sign in to view client's details.
| m****gdi
|    Italy
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Sep 27, 2015  |  Closed  |   1 Proposal
We are deploying radio infrastructure, antennas, feedline and out of band communications to cell sites in the NE and Midwest. This requires 3-5 years prior experience with MW deployment, site/contractor management. Knowledge of tower structures, site work, radio deployment, antenna alignment is a must. Knowledge of MS Office is required as well as skills with MS Project or equivalent tools. Candidate should have good fundamental knowledge of electrical and RF engineering principals as well as Internet protocols such as Ethernet, UDP, TCP and the establishment of network infrastructure.
Category: Other - Engineering &...       
Preferred Location: United States

w****eaf
 [?]
Sign in to view client's details.
| w****eaf
|    United States
Hourly Rate: $20 - $30 / hr   |  Duration: Not Sure  |  Posted: Sep 22, 2015  |  Closed  |   5 Proposals
I am setting up online monitoring system for Hydroponic and Aquaponic system. It is based on Arduino and Raspberry Pi. I have little knowledge about Hydroponic and need one time help to understand EC measurements and conversion of Analog reading by Arduino to actual Siemens units and writing code to support various EC sensors. I need someone with knowledge of Hydroponic and Arduino
Category: Other - Engineering &...       
Skills: Electrical Engineering, Electronics       

r****oly
 [?]
Sign in to view client's details.
| r****oly
|    Israel
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Sep 15, 2015  |  Closed  |   11 Proposals
I'm looking for a team of engineers who can help me build a prototype in Seattle. This can either be a full-time job for 1 month or a part-time job for 2-3 months. What I'm building: I'm building a special kind of vending machine that will be refrigerated and contain fresh fruits. Will share more details upon signing the attached NDA and IP. What I'm looking for: Electrical Engineer (firmware, motors, circuits) Mechanical Engineer Industrial Engineer Structural Engineer Things that need to be installed: Water supply and drainage (temporary) Infrared sensing latch Dispensing mechanism Welding metal (exterior structure) Controls, motors and circuits Refrigeration Touch UI (menu) panel What I currently have: Mechanical Designer CAD Manufacturer (for guidance) Materials/Ideas Look forward to working with you!
Category: Other - Engineering &...       
Preferred Location: United States

f****ala
 [?]
Sign in to view client's details.
| f****ala
|    United States
Fixed Price: Less than $500   |  Posted: Sep 08, 2015  |  Closed  |   12 Proposals
Hi I'm looking for an industrial designer to design for me a portable high powered blender/protein shaker. I want to use a removable 18v Lithium battery, similar to a high powered cordless drill. I want to utilize and off the shelf 18v motor and battery. Everything else should be able to be cnc router / 3d printed for prototyping. I have access to a prototyping lab in my city. The volume of the shaker should be 500ml Deliverable - files for CNC router/3d printer.
Category: Other - Engineering &...       

B****ris
 [?]
Sign in to view client's details.
| B****ris
|    Australia
Fixed Price: Less than $500   |  Posted: Sep 08, 2015  |  Closed  |   17 Proposals
As the title states, I need some guidance (and circuit diagram) on a very basic design that uses both an Adafruit Trinket 5V micro-controller and a Hall Effect IC sensor (links below). Basically need the hall effect sensor to notify through USB when flagged. If you can code in Arduino, there's extra work in it for you.   [obscured]  /introducing-trinket/pinouts   [obscured]  /datasheet-pdf/pdf/547695/OHHALLSENSOR/OH44E.html
Category: Other - Engineering &...       

****
 [?]
Sign in to view client's details.
| Client
|    United States
Hourly Rate: $20 - $30 / hr   |  Duration: Not Sure  |  Posted: Sep 04, 2015  |  Closed  |   1 Proposal
Must work in Surrey, B.C. (Cloverdale area). Must be proficient with an oscilloscope. Analyze and understand the signals of fuel injectors and various sensors in a car engine that's operating at different RPM ranges. Then develop a fully programmable device that can intercept and manipulate said signals to alter engine performance/economy. The device must be capable of supporting 3 cylinder (3 injector) to 10 cylinder (10 injector) engines, meaning that while we will create a different plug 'n play harness for each engine, the device (that you will help develop) can be programmed to work with any engine. For instance, if the device will be connected to a V10 engine, then we will upload a V10 program into it. The device should also have logging capability, meaning we can download signals via USB to a laptop. If you think another engineer (or outside contracting) is needed to assist this product development, then please let us know.  If possible, show us the projects that you have ac...
Category: Other - Engineering &...       
Preferred Location: Canada

q****omm
 [?]
Sign in to view client's details.
| q****omm
|    Canada
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job