Save this Search
     
Sort by:
  • Posted Date
Fixed Price: $3,000 - $13,000   |  Posted: 58 minutes ago  |  Ends: 14d, 23h  |   0 Proposals
New bootstrapping startup is developing a diving industry device that requires un-tethering from the primary power source. We need a handheld trigger throttle with start-stop-hold functions. Must be able to perform at 80ft depth from hull mounted receiver as well as above water 80ft unobstructed distance. Please submit resume if you have direct and tangible experience with design, production and system integration of comparable equipment. Compensation negotiable, timeline immediate. Location: Del Mar, CA On site desk available,
Category: Electrical       

d****rra
 [?]
Sign in to view client's details.
| d****rra
|    United States
Hourly Rate: Less than $10 / hr   |  Duration: Not Sure  |  Posted: 8h, 19m ago  |  Ends: 14d, 15h  |   3 Proposals
looking for DESIGN FOR THE MECHANICAL, ELECTRICAL, AND PLUMBING (MEP) ENGINEERING Budget is less, time and budget is tight, please reply if you are familiar with required skill and expertise. software REVITS 2013-14
Category: CAD       

j****123
 [?]
Sign in to view client's details.
| j****123 *
|    India
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 10h, 18m ago  |  Ends: 14d, 13h  |   14 Proposals
I have a PCB design using bluetooth created in Altium. I would like a second set of eyes to look over the design and make changes to improve it. NDA is needed.
Category: Electrical       

r****jam
 [?]
Sign in to view client's details.
| r****jam
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 12h, 49m ago  |  Closed  |   16 Proposals
We are a small architecture and design company located in Fort Lauderdale, FL. We need a person able to develop a full project of a contemporary house to be built in Fort Lauderdale or Miami area. ______________________________________________________________ Technical specifications: House is: 3 story, 2500 sq feet = 240 sq meters (A/C area) Has to be designed in: contemporary, modern, futuristic style with clean lines, warm vibrant colors, and minimalist concept. Land area is: 5500 sq feet = 500 sq meters located on a paved road with public utilities available (sewer, electricity, water). Terrain is: mostly compact sand, flat area, elevation is 5-10 meters above sea level Approximate GPS location is: 26N and 80W Building orientation: (to be decided yet) Weather is: Tropical humid, maritime influence (salt spray), heavy rainfall, subject to hurricanes Category 1 to 5 hurricanes. Very strong solar radiation. 4 bedrooms + 3 bathrooms (3 bedrooms with 3 en-suite bathrooms) 2 car...
Category: Architecture       
Skills: 3ds Max, ArchiCAD, Architecture, V-Ray, 3D Rendering       

a****tez
 [?]
Sign in to view client's details.
| a****tez
|    United States
Hourly Rate: $15 - $20 / hr   |  Duration: 1-2 weeks  |  Posted: 19h, 6m ago  |  Ends: 14d, 4h  |   21 Proposals
? Ability to read, analyzes, and interprets blueprints ? Organization/time management skills ? Ability to work independently as well as part of a team, good attention to detail ? Ability to meet deadlines and recognize discrepancies ? General understanding of electrical system drawings ? Knowledge of basic AutoCAD skills ? Capable of reading 2D plans, electronically or hard copy ? Working knowledge of 3D layout and design
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

h****ton
 [?]
Sign in to view client's details.
| h****ton
|    United States
Fixed Price: More than $10,000   |  Posted: 19h, 47m ago  |  Ends: 14d, 4h  |   1 Proposal
I am looking for the development of a portable device which will be able to recognize at a certain level, images printed at the back side of a cardboard. Recently, I have heard the development of microchip utilizing Terahertz for "Xray" short of vision. Maybe there is another technology, that I am not aware of. If this kind of technology/device is in prototype or test mode, I am still interested.
Category: Other - Engineering &...       

s****ist
 [?]
Sign in to view client's details.
| s****ist
|    Greece
Fixed Price: More than $10,000   |  Posted: 19h, 50m ago  |  Ends: 29d, 4h  |   0 Proposals
I am looking for the development of a portable device which will be able to recognize at a certain level, images printed at the back side of a cardboard. Recently, I have heard the development of microchip utilizing Terahertz for "Xray" short of vision. Maybe there is another technology, that I am not aware of. If this kind of technology/device is in prototype or test mode, I am still interested.
Category: Other - Engineering &...       

s****ist
 [?]
Sign in to view client's details.
| s****ist
|    Greece
Fixed Price: Less than $500   |  Posted: 21h, 16m ago  |  Ends: 2d, 2h  |   1 Proposal
Construction estimator needed to determine cost of renovations of a church. Complete plans for bidding and construction are available for use in doing take-offs. Renovations include stripping a flat roof for construction of a 14'x40' choir loft; stairs; LULA elevator; and reconstruction of restrooms for barrier free. Scopes of work are available for the following: Carpentry, Concrete, Demolition, Drywall, Electrical, Elevator, Insulation, Mechanical, Plumbing, Roofing. Detailed take-offs for construction are NOT needed, only assembly (square foot) cost for budget purposes. Material and Labor should be separated for local adjustment or cost shall be on US national average with local/regional adjustments. Estimator shall provide its own estimating software or books for use in preparing estimate. Final estimates should be in 4 categories - 1) Barrier Free Restrooms 2) LULA elevator 3) Choir Loft and stairs 4) Mechanical ductwork. Details of cost determination shall be provi...
Category: Architecture       
Preferred Location: United States

C****Mon
 [?]
Sign in to view client's details.
| C****Mon
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 22h, 26m ago  |  Ends: 14d, 1h  |   0 Proposals
Design and implement a credit card swiper that will interface with the iPhone and iPad lightning connector. The end product is to produce both a working prototype of the electronics for the swiper and a digital design to hand over to a manufacturer to build the swiper. Key Requirements The magnetic swiper head must be easily replaceable by a non-technical person. The swiper must be reliable. The device must not require charging, but may draw power from the lighting connector. Key Results A Prototype swiper for the iPhone, iPad and iPad Mini. Integration of the prototype with it's housing. Output to provide for manufacturing of the final product. Optional (Industrial Design) Design a durable, aesthetically pleasing credit card swiper to attach to an iPhone, iPad & iPad Mini. The end product is to produce both a prototype of the swiper and a digital design to hand over to a manufacturer to build the swiper.
Category: Electrical       
Skills: Electrical Engineering       

f****ise
 [?]
Sign in to view client's details.
| f****ise
|    United States
Fixed Price: $500 - $1,000   |  Posted: 23h, 0m ago  |  Ends: 14d, 0h  |   1 Proposal
Looking for AutoCAD Designer with strong skills and experience in the Wireless Communications Industry. Typical projects include drafting of field sketches and assembly of drawings. An existing CAD library of details is required. Typical project may include the following: Lease Exhibits FAA 2Cs Zoning Drawings and Civil Site Plans Construction Drawings Electrical Drafting Structural Drafting
Category: CAD       
Skills: AutoCAD, SolidWorks, Electronics, Wireless       
Preferred Location: United States

p****ngo
 [?]
Sign in to view client's details.
| p****ngo
|    United States
Fixed Price: Not Sure   |  Posted: 23h, 47m ago  |  Ends: 14d, 0h  |   2 Proposals
We need a project for a DVR The specifications can be discussed, but are mainly this: - Linux 3.0 or higher - 4 video input - 4 audio channel - 1 HDMI - SATA - 485 PORT - Resolution: 4D1@30fps - 30fps per camera - 120fps - Video recording - FTP server to access the videos - Possibility to save the video on the HD SATA or SD Card. Possibility to configure the output video resolution. - Possibility to connect a WIFI or 3G dongle through USB. - 2 USB ports - GPI/O - Ethernet
Category: Electrical       

s****asa
 [?]
Sign in to view client's details.
| s****asa
|    Brazil
Fixed Price: Not Sure   |  Posted: Apr 17, 2014  |  Ends: 28d, 21h  |   4 Proposals
I need someone to connect a transformer and a thermostat for a heating pad. To make sure it works and is safe. I'm asking for someone to put together a new heating pad that I've designed and patented.
Category: Electrical       

P****PAD
 [?]
Sign in to view client's details.
| P****PAD
|    United States
Hourly Rate: Less than $10 / hr   |  Duration: Not Sure  |  Posted: Apr 17, 2014  |  Closed  |   1 Proposal
design all types of electrical system " lighting,power,fire,telephone,data and security" systems for different type of buildings
Category: Electrical       
Skills: Electrical Engineering, Interior Design       

s****ada
 [?]
Sign in to view client's details.
| s****ada
|    Egypt
Fixed Price: $30 - $250   |  Posted: Apr 17, 2014  |  Ends: 13d, 17h  |   2 Proposals
Hello, I have a project i have been working on I am building a wireless power transfer system that should work as far as 10 feet and should power multiple devise like laptop and cell phone at the same time. I have build a smaller model of this but i need help building a larger one the. at the end of this project i will need you to also build it physical and ship it to me i will pay for the cost of shipping and the parts needed for this the cost of building this should not be more then $50 USD the wireless devices should work in all 4 directions not just one directions. please let me know the cost of this project and how long it will take to do it. this is the Schematic   [obscured]  /img/bezdratovy-prenos-energie/wet.gif references i used to build my device   [obscured]  /bezdratovy-prenos-energie.php   [obscured]  /watch?v=r1UT4NuygmQ   [obscured]  /pages/intellectual-property.html   [obscured]  /stuff/41/wec.shtml#description(ID: 5576281...
Category: Electrical       

A****d12
 [?]
Sign in to view client's details.
| A****d12 *
|    Pakistan
Fixed Price: Not Sure   |  Posted: Apr 17, 2014  |  Ends: 28d, 15h  |   2 Proposals
We're now looking for Japanese to English translators to work in a project about electronics & mechanics. The volume is about 500K char. Trados required. This is a long-term project and will start immediately, so we will appreciate your early reply and participation. However, if you are not available right now, you can still apply for the job, but you will be given fewer characters to translate. The job is open only to freelance working anywhere around the world. To know more about the subject, please refer to the sample text below. If you're interested in this job, please e-mail your CV with picture along with the following information to   [obscured]  .tw with the subject line: To Jeremy Jap>Eng_ProZ: your name - Name: - Best Rate Per Japanese Character(USD): - Daily Output: - Native Language: - When can you start this project ( Please note that if you are not available right now, you can still apply for this job, but you will be given fewer characters to...
Category: Electrical       

s****iao
 [?]
Sign in to view client's details.
| s****iao
|    Taiwan
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 17, 2014  |  Closed  |   12 Proposals
A quick job. I have a 3 separate CAD architectural drawing with lots of layers/blocks, and need these flattened down to a single layer drawing with all 3 floors shown to use as an xref'd drawing for use elsewhere. (I will be placing electrical devices on this later). The work needs to be done quickly, I need a super light, small file that is clean and properly referenced, ideally already nested and referenced properly. If the work is clean I have more work in the pipeline.
Category: CAD       
Skills: AutoCAD, AutoCAD 2012, CAD/AutoCAD       

l****us4
 [?]
Sign in to view client's details.
| l****us4
|    United Kingdom
Hourly Rate: $15 - $20 / hr   |  Duration: 1-2 weeks  |  Posted: Apr 17, 2014  |  Ends: 13d, 12h  |   3 Proposals
We wish to keep our bulls head logo but want to revamp it to have a more corporate look. We also would like colour combinations and background colours streamlined and what colour layers to use for all marketing material: Website, business cards, envelopes, brochures etc. We are bulbar manufacturers and deal with a male dominated transport trucking industry.
Category: Mechanical       

A****lys
 [?]
Sign in to view client's details.
| A****lys
|    Australia
Fixed Price: Less than $500   |  Posted: Apr 16, 2014  |  Ends: 13d, 7h  |   4 Proposals
I've got the hardware and board layout designed for a PIC30 Microcontroller for a Solid State Relay design and wanted to have a programmer add some intelligence in order to prevent false triggering in conducting the power to the load. This includes fault detection and filtering/decision making on weather the trigger input signal is truely a "on" signal or weather it was due to some sort of random noise (transients), a power system fault (loss of power/sagging power), random switching noise, a damaged/faulty component upstream, etc...
Category: Electrical       
Skills: C, C++, Adaptive Algorithms, Embedded System       

s****yka
 [?]
Sign in to view client's details.
| s****yka
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 16, 2014  |  Ends: 13d, 0h  |   4 Proposals
We need an interface cable designed and prototyped that will incorporate three channels of charge mode amplifiers with gain and a single channel 15W speaker amplifier. This cable will connect a device containing two piezoelectric sensors and one speaker to an existing embedded system. Currently, the embedded system connects to a slightly different device which contains a speaker and two microphones. The goal is to include the electronics in the prototype cable that will interface the new device to the existing embedded system. We would like this designed and fabricated ASAP and would like five cables made after we have tested the prototype. A non-disclosure agreement will be required to work on this project. See attachment for the requirements. Applicants should be well versed in analog circuit design and PCB layout.
Category: Electrical       
Preferred Location: United States

j****007
 [?]
Sign in to view client's details.
| j****007
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job