Save this Search
     

All JobsElectrical Engineering

 (159 results)  
Sort by:
  • Posted Date
Results for 'Electrical Engineering'
Fixed Price: Less than $500   |  Posted: Mar 26, 2015  |  Ends: 8d, 23h  |   4 Proposals
hi i'm looking for a long term work together relationship on raspberry Pi development... in this project, i already got the working version (MC9S08AC16 )in C++ code, i need it to be converted to raspberry Pi and replace by raspberry Pi.. Please let me know if you are interested
Category: Electrical       

w****att
 [?]
Sign in to view client's details.
| w****att
|    Malaysia
Fixed Price: Not Sure   |  Posted: Mar 26, 2015  |  Ends: 8d, 23h  |   0 Proposals
We have developed a number of products using BLE121LR a Bluegiga chip - this was done after testing the BLE121LR chip in DKBLE. Our products are not performing close to the range performed by DKBLE based on BLE121LR. We are looking for a consultant who has expertise with similar modules in general and BLE121LR in specific to assist in increasing the BLE RF range of our products.
Category: Electrical       

s****dha
 [?]
Sign in to view client's details.
| s****dha
|    India
Hourly Rate: More than $50 / hr   |  Duration: Not Sure  |  Posted: Mar 25, 2015  |  Ends: 8d, 12h  |   7 Proposals
Hi Looking to hire an Engineer to help create a product for me. Need them to have knowledge about electricity and knowledge in fire. Willing to pay top Dollar please be in the US and needs to sign a NDA
Category: Chemical Engineering       

m****ado
 [?]
Sign in to view client's details.
| m****ado
|    United States
Hourly Rate: More than $50 / hr   |  Duration: Not Sure  |  Posted: Mar 25, 2015  |  Ends: 8d, 12h  |   4 Proposals
Hi Looking to hire an Engineer to help create a product for me. Need them to have knowledge about electricity and knowledge in fire. Willing to pay top Dollar please be in the US and needs to sign a NDA
Category: Electrical       

m****ado
 [?]
Sign in to view client's details.
| m****ado
|    United States
Fixed Price: Less than $500   |  Posted: Mar 25, 2015  |  Ends: 8d, 11h  |   5 Proposals
The device: Turn switch on > sound and vibration is produced > Turn switch off Specification: -Volume should reach 100dB -Frequency should reach 8000Hz -Vibration intensity (as powerful as a mobile phone vibration motor) (sound volume, sound frequency and vibration intensity must be adjustable and able to be set to specific figures)
Category: Electrical       
Preferred Location: United Kingdom

j****jim
 [?]
Sign in to view client's details.
| j****jim
|    United Kingdom
Fixed Price: Less than $500   |  Posted: Mar 25, 2015  |  Ends: 8d, 10h  |   2 Proposals
The device: Turn switch on > sound and vibration is produced > Turn switch off Specification: -Volume should reach 100dB -Frequency should reach 8000Hz -Vibration intensity (as powerful as a mobile phone vibration motor) (sound volume, sound frequency and vibration intensity must be adjustable and able to be set to specific figures)
Category: Electrical       

j****jim
 [?]
Sign in to view client's details.
| j****jim
|    United Kingdom
Fixed Price: $20 - $30   |  Posted: Mar 25, 2015  |  Ends: 8d, 10h  |   26 Proposals
Our company name is Mustang Renewable Power Ventures. We develop projects that divert trash from landfills. Primarily we recover recyclables and organics from the trash. We use anaerobic digestion to turn the organics into biogas, which we either clean up and compress to be sold as CNG or combust in CHP engines to produce electricity. We like the recycle symbol and how it represents a closed loop. Looking for our logo to represent what we do. Green and blue are our preferred colors. Job description: Looking for an abstract art or negative space logo. Logo type: Abstract
Category: Logos       

t****rdt
 [?]
Sign in to view client's details.
| t****rdt
|    United States
Fixed Price: Not Sure   |  Posted: Mar 25, 2015  |  Ends: 8d, 5h  |   5 Proposals
Looking for homekit compatible pcb design with bluetooth wifi. Which Needs simple firmware. Based broadcom wice , marvell , or texas instruments. Homekit compatible chip Which has mfi licence from Apple.
Category: Electrical       

w****842
 [?]
Sign in to view client's details.
| w****842
|    Norway
Fixed Price: Not Sure   |  Posted: Mar 25, 2015  |  Ends: 8d, 3h  |   8 Proposals
I need a prototype created of a very specific solar charging unit. Details will be given once job has begun. Must be extremely well versed in solar energy and solar charges. Wattage for the charger must be high. Must be willing to sign consultant agreement and non-disclosure agreement. Must be able to create working prototype for solar charging unit. Rate to be discussed.
Category: Electrical       

J****sDo
 [?]
Sign in to view client's details.
| J****sDo
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: Mar 25, 2015  |  Ends: 8d, 3h  |   10 Proposals
Hi, My name is Jacob I am a BIM Manager at a large electrical engineering firm in Sydney Australia. I am looking for capable C# programmers to create a several plugins. They are for Revit Architecture and Revit MEP 2014 & 2015. This is a software architects and building services engineers and drafters use to model projects. The aim with the plugins are to automate and extend the capabilities of Revit making the user more productive. Therefor it is imperative for the applicants to be familiar with Revit. This will be an ongoing relationship with the right programmers which have knowledge in Revit, C#, API Development and Building Architecture. Please send me a message if you match description. Regards Jacob Type of application development required: New Application Integration requirements: Requires Integration Purpose or functionality of application: First application; This application will automatically issue models. For example; Compacting file> Dethatching ...
Category: Software Application       

a****ian
 [?]
Sign in to view client's details.
| a****ian
|    Australia
Fixed Price: Not Sure   |  Posted: Mar 24, 2015  |  Ends: 7d, 15h  |   23 Proposals
Hello, I am working on a 3D marble maze toy. This toy consists of several rings that are connected together, forming a maze. These rings are rotated at random by a motor inside the toy, which creates a new maze after each rotation. I am looking for a mechanical engineer to develop these rings and other mechanical elements, and integrate electrical motor into this design. Experience in designing marble mazes or similar toys is desirable. Expected deliverables: 2D CAD drawings, 3D Solidworks model, STEP files and everything else required for prorotype production. Contact me for more details.
Category: Mechanical       

l****404
 [?]
Sign in to view client's details.
| l****404
|    Canada
Fixed Price: Not Sure   |  Posted: Mar 24, 2015  |  Ends: 22d, 14h  |   5 Proposals
Looking for an honest, hard-working, student electrical engineer who has the ability to design a prototype, source all parts, and assemble a working model of a small product. Payment for services and possible percentage of ownership involved.
Category: Electrical       
Preferred Location: United States

M****ion
 [?]
Sign in to view client's details.
| M****ion
|    United States
Hourly Rate: Less than $10 / hr   |  Duration: 1-2 weeks  |  Posted: Mar 24, 2015  |  Ends: 7d, 9h  |   6 Proposals
Hi, This is an interesting request and will most probably take someone 2-3 hours to complete. I am looking for someone who knows how to navigate the various websites where patents are published. I am looking for a single example of a patent illustration in the following industries to publish in my marketing materials. 1) Medical Devices 2) Wireless Technologies 3) Semiconductors 4) Electrical Engineering 5) Biotech 6) Automotive The image chosen should capture the respective industry. It should not just be a single image taken from a company in that technology area. I will hire multiple people for this job and it has to be performed ASAP. If you have any questions feel free to ask.
Category: Other - Administrative...       

y****984
 [?]
Sign in to view client's details.
| y****984
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 24, 2015  |  Ends: 22d, 8h  |   17 Proposals
I am looking for an experienced and knowledgeable engineer to aid in the design and prototyping of an embedded system for a product we are planning on bringing to market. The design and components should closely mirror that of the Raspberry Pi Model A+, with some components removed and some added. In particular, we desire a pre-certified (FCC) wireless-n module and 4-8gb of eMMC or NAND flash. HDMI and two USB will also be required. A successful candidate will have the ability to provide a schematic of the design, will be able to aid in the component selection, will be able to produce a functional prototype and provide required support for internal embedded linux development. Milestones for the project are anticipated to be, (1) component selection in coordination with the client, (2) delivery of approved schematic and (3) delivery of functional prototype. Ongoing opportunities for a successful candidate may be available. Please fell free to contact us with any questions relating ...
Category: Electrical       

s****e11
 [?]
Sign in to view client's details.
| s****e11
|    United States
Fixed Price: Less than $500   |  Posted: Mar 24, 2015  |  Ends: 7d, 8h  |   4 Proposals
it is a brushless hobby motor designed for airplanes but has ALOT of torque and can handle unto 70A at my 25V nominal system. It is a 14 pole outrunner motor. We use 120 degree hall sensors to monitor position, rpm, I have just focused on current control and limits for acceleration. I use a PIC32MX250 micro controller Expert should apply which quick turn around. ready to hire now
Category: Electrical       
Skills: Electrical Engineering, Electronics       

E****ido
 [?]
Sign in to view client's details.
| E****ido *
|    Pakistan
Fixed Price: $1,000 - $5,000   |  Posted: Mar 24, 2015  |  Ends: 22d, 6h  |   12 Proposals
I have never posted an ad before on a site like this so bear with me. Want to build an energy device. I have the plans to do this and they are from a very reliable source. I need help from an electrical engineer to complete this. Ideally you are in Missouri or Arkansas. However Skype could certainly mitigate that problem. I am 60 years old and have many skills including running a medium size company for 20 years. I am willing to pay well for the right person. Not a job that pays by the hour, rather a price agreed upon. If you are willing to consider the knowledge you will receive from the plans as payment that would be ideal, but not necessary. Could set that up so that there is no risk for you, such as payment first, if project is successful, refund for technology. Or other ideas or possibilities. Some of what you will learn is not taught in schools. But, I know you are looking because you need money. That is on the table. One more thing, it's not mechanical it's electronic. Also, don...
Category: Electrical       
Skills: Electrical Engineering, Electronics       

T****dom
 [?]
Sign in to view client's details.
| T****dom
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 24, 2015  |  Ends: 7d, 5h  |   6 Proposals
Hi James, I am searching for a talented person like you to design a new product. The piece is small; on the order of approximately 20mm x 9mm. The product is required to operate at high temperatures and be heated by means of electrical current. I am interested in learning about how you handle intellectual property protection. After viewing your portfolio capability is not in question. Are you interested in having a conversation? Thank you, Chuck
Category: 3D Modelling       
Preferred Location: United States

C****osi
 [?]
Sign in to view client's details.
| C****osi
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 24, 2015  |  Ends: 7d, 5h  |   7 Proposals
Hi, I need a circuit board designed and code written for a device that will transmit a weight over GSM to remote servers. The signal coming in will be that of a load cell. I would like the inputs from the load cells to be intrinsically isolated if possible as well. Once the signal is received by the Micro controller, it needs to be sent by GSM. That signal will be sent to a remote server and a web application will use the data to provide customer specific information. The unit will be able to take from 1-10 inputs from the load cells for now, depending on the application. Some Digital outputs from the controller will also be transmitted for alarms. The unit will need to be battery powered, with battery level indication also transmitted. I was thinking that readings from the load cell could be stored up and every couple of minutes sent to server to save on battery life. The project is in South Africa. So, I will need controller, modem etc. to be freely available here. I would prefer...
Category: Electrical       

k****ter
 [?]
Sign in to view client's details.
| k****ter
|    South Africa
Hourly Rate: $20 - $30 / hr   |  Duration: 1-3 months  |  Posted: Mar 24, 2015  |  Ends: 7d, 2h  |   20 Proposals
we have a prototype based on arduino for a sensor and wifi communications. Likely cc3000 chip or equivalent. We want to first put this on one pcb board and get it packaged into a device. Can use arduino or whatever other recommended microcontroller.
Category: Electrical       
Skills: Electrical Engineering, Electronics       

c****n99
 [?]
Sign in to view client's details.
| c****n99
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 24, 2015  |  Ends: 7d, 0h  |   7 Proposals
You MUST have experience in the Automotive REPAIR Industry. You MUST speak FLUENT English. You MUST be a proficient typist. You MUST be able to commit a minimum of 20 hours per week. Please DO NOT apply if you do not meet this criteria. Job Description: This job involves re-writing short, concise repair bulletins for Automotive Technicians. The information will be provided in a spreadsheet and you will then enter it into a database online.This is not copy/paste data entry. You must interpret and re-write the articles. The writing must be in an "instructional" format, not in prose (see example) There are approximately 5000 articles to be written. There will also be ongoing work for the right person if desired. There will be comprehensive instructional documentation including flowcharts, videos and references to help you get started. I will also be contactable 16 hours per day for any questions The work will be randomly checked to ensure consistent quality and output. B...
Category: Technical Writing       

r****sae
 [?]
Sign in to view client's details.
| r****sae
|    Australia
Hourly Rate: $10 - $15 / hr   |  Duration: 1-2 weeks  |  Posted: Mar 23, 2015  |  Ends: 6d, 18h  |   7 Proposals
Small circuit board 32x25mm (4) 2.4 screw holes (specific location requirement) Micro USB 1 Button Long Hold Tap 1 Tap 2 Long Hold Power 1 Fan (2.5v) ON OFF 1 Peltier Module 1.0v 1.5v 1.9v Off L.E.D. Lights 1 Light 2 Lights 3 Lights Off I have a sketch on where i would like the button and l.e.d. lights to be located. Very simple. Please email me any questions.
Category: Electrical       

S****1ds
 [?]
Sign in to view client's details.
| S****1ds
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 23, 2015  |  Ends: 6d, 18h  |   6 Proposals
After a suitable candidate to design an electric open air heater suitable for 1000 degree centigrade for the testing of purpose built flame retardent panelling. Once the candidate has been selected they will be engaged to carry out the complete design work for the construction of said test station. All works must comply with Australian Standards
Category: Product Design       

T****ero
 [?]
Sign in to view client's details.
| T****ero
|    Australia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 23, 2015  |  Ends: 6d, 18h  |   8 Proposals
We are looking for professional engineers with practical experience within Hazardous Areas to join our team on an Ad-Hoc basis. We are a social enterprise business that believes that Safety should be first in all work places and that it is the RIGHT of all humans to work & live in a safe work environment. The individuals that we are looking for must share a desire for social justice and something burning within them to change the way people think about safety. We are looking for experienced candidates that have a proven track record of delivering work within acceptable time frames and that can provide an exceptionally high level of work
Category: Electrical       
Skills: Electrical Engineering, Electronics       

T****ero
 [?]
Sign in to view client's details.
| T****ero
|    Australia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 23, 2015  |  Ends: 6d, 17h  |   3 Proposals
I have a Factory Talk Historian project that I may need some help on. We are a systems integrator and we have done a ton of PLC type work but have not done Historian. I'm fairly new to Historian and i'm not exactly sure even how to see if this is something you are interested in. It is a really small and straight forward Historian Project with only about 30 Tags or so. it is basically a Batch Mixing process and they want to record some values every 5 minutes during a batch and then they want to store a bunch of values at the end of the batch. Thanks, Jay King
Category: Electrical       

J****123
 [?]
Sign in to view client's details.
| J****123
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 23, 2015  |  Ends: 6d, 14h  |   21 Proposals
Requirements: 1. Thermal control of 2 resistance heaters with thermocouple feedback. May include Fan control also for cooling. 2. Toggle 8 LEDs on/off 3. Convert 4 analog signals to digital value. Will require some on board signal conditioning. Signal source is a photo diode or similar type device. Signal will need to be free of noise. 4. Battery powered - will need a battery charging circuit 5. Processor - TBD 6. USB access 7. Bluetooth capable - will need to control the hardware via a mobile App. App development will be done separately. Primarily looking for hardware designer at this point. If the same individual can do the firmware, then we may also engage them on the firmware side. Otherwise, we have our own guy we often use.
Category: Electrical       

b****ght
 [?]
Sign in to view client's details.
| b****ght *
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job