Save this Search
     

All JobsElectrical Engineering

 (1,062 results)  
Sort by:
  • Posted Date
Fixed Price: Less than $500   |  Posted: Jan 19, 2016  |  Closed  |   7 Proposals
Hello, I want you to design 5- stage Pipelined 32 bit Mips Processor. I would attach the manual explaining the whole project and i will give you the memory on which you need to make the processor work and you need to make the processor work for the square root and Fibonacci code which are given along with memory. I can give you further details who are interested in this project.
Category: Electrical       
Skills: Electronics, Computer Hardware Design       

****
 [?]
Sign in to view client's details.
| Client
|    Sweden
Fixed Price: Not Sure   |  Posted: Dec 14, 2015  |  Closed  |   0 Proposals
You will be required to design a 'Night Timer' system .The timer should have four 7-segment LEDs i.e. should count up to 59 minutes 59 seconds in increment of 1 second.there should be a pause and reset button. 1. Four 7-segment RED LEDs. 2. One PAUSE button and one RESET button to pause and reset the timer as needed. 3. You need to use and configure a Light Dependent Resistor for that purpose. (Note: Multisim does not make provision for LDRs so to simulate your design you have to use an Opto-coupler and potentiometer combination to represent the LDR). 4. You need to use a step-down transformer as the system will have a 230V AC supply and the timer should operate on 9V DC. 5. You MUST ONLY use the following components in your design: Power Source, Transformer, Optocoupler, Potentiometer, switches, LED Display, Resistors, Capacitors, Transistors, Diodes, Basic logic gates ICs, Decoders, Timers, Counters and Flip-Flops. 6. You CANNOT use Programmable ICs, Micro-controllers or M...
Category: Electrical       

k****shg
 [?]
Sign in to view client's details.
| k****shg
|    Mauritius
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Dec 12, 2015  |  Closed  |   9 Proposals
vehicle tracking device for all vehicles and can be small and accessed from devices or connected..........
Category: Other - Engineering &...       

D****ney
 [?]
Sign in to view client's details.
| D****ney
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Dec 11, 2015  |  Closed  |   4 Proposals
I need help studying for my electrical engineering exam. This course is about Electric Machines and Power Systems. I am looking for someone who knows this subject matter very well. I need help with the following subjects: Electro-mechanical Energy Conversion Principles Rotating Machines Synchronous Machines Polyphase Induction Machines (Asynchronous Machines)
Category: Electrical       

d****065
 [?]
Sign in to view client's details.
| d****065
|    Canada
Fixed Price: About $185   |  Posted: Dec 10, 2015  |  Closed  |   1 Proposal
I own a sign business in Albuquerque NM and am required to pull permits for most of my job installations. A large portion of my work includes channel letters. These are the individual letters that businesses have in their storefronts and light up at night. I have all licenses necessary to install these type of signs. I have no problem pulling permits in the city i live in. The problem i have is i can't pull permits in a nearby county because they specifically need engineer drawings of how the sign will be installed to the building wall. They specified i need an engineer with an official engineer stamp on all drawings. The current permits i provide the city i live in contain a drawing of how i will install the sign to the wall, but since i'm not an engineer they cannot accept my drawings. I can provide these drawings as a guide of what i need. I hope i explained myself correctly. Hope there is someone who can help me. Thank you!
Category: Other - Engineering &...       

d****gns
 [?]
Sign in to view client's details.
| d****gns
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Dec 09, 2015  |  Closed  |   2 Proposals
Hello, I'm taking stochastic processes course and the professor will post an extra homework for bonus on Dec 15th, 3:30 pm (Central time zone). Its due 24 hours. So, I'll need ur help then. The book we use: "Introduction to probability models", 10th ed, by Sheldon Ross. U can find a free pdf copy online. The topics covered in this bonus HW: Poisson Process (Ch5), Continuous time Markov chains (Ch6), Renewal Process (Ch7), & Queuing Theory (Ch8). Please take a look at the topics in the book and let me know if u will be available by then as we need to coordinate. Looking forward hearing from u soon. Thanks, Kamal
Category: Electrical       

k****311
 [?]
Sign in to view client's details.
| k****311
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Dec 09, 2015  |  Closed  |   6 Proposals
Looking for an Electrical Engeineer with experience and knowledge in Power Systems, specifically the technology involved in Power strips and Surge Protectors. The product is in it's early stages and would like someone that is able to engineer and design for manufacturing. I live in Westchester, New York. Although not an absolute necessity, it is preferable I find someone in the New York City area. Thank you.
Category: Electrical       

F****Y00
 [?]
Sign in to view client's details.
| F****Y00
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: Dec 09, 2015  |  Closed  |   10 Proposals
Hi All, I'm looking for a translator who can translate a technical manual. There are about 41.000 words and we need it by 7 January. It's a description of procedures for operation, handling, testing, and maintenance. Thank you!
Category: Other - Engineering &...       

****
 [?]
Sign in to view client's details.
| Client
|    Netherlands
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Dec 08, 2015  |  Closed  |   10 Proposals
Looking to compile a customer leads list of construction trades companies and construction retailers in Vancouver, BC and surrounding cities. Want company names, contact phone and email(if available), contact name. These are the specific trades categories to search for: Air Conditioning Contractors Appliances Asbestos Removal Builders & General Contractors Building Material & Tools Cabinets Carpet & Rug Dealers Carpet Cleaning Closet Organizers Concrete Breaking, Corning, Cutting & Repairs Concrete Contractors & Pumping Srvices Concrete Ready Mix Countertops Dampproofing Doors & Mouldings Drainage Services Drapery & Blinds Drywall Contractors Electrical Contractors Electrical Supplies Engineers Excavating, Drainage & Wastework Supplies Excavation & Demolition Fence Fence Rentals Finishing Carpentry Fire Protection Fireplace Form Rentals Framing Contractors Furnace Garage Doors & Floors Garbage Collection General Accounting Glass & Shower D...
Category: Lead Generation       
Skills: Internet Marketing, Lead Generation, Sales       

j****123
 [?]
Sign in to view client's details.
| j****123
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Dec 08, 2015  |  Closed  |   5 Proposals
This is a small job. I am building a radio controlled vehicle . I need someone to draw a clear wiring diagram for me, to wire a T6EHP-E radio transmitter with R6EH receiver to 4 - Pololu 18v7 simple motor controllers. The left joy stick needs to operate 2 dc motors (tank style steering). These channels need to be "mixed" The right joystick (forward /back)needs to operate a dc up/down linear actuator, and a toggle switch needs to switch a dc motor on/off. Anyone interested in doing this at a fixed price? I need someone who is experienced in RC. Richard
Category: Electrical       

b****ird
 [?]
Sign in to view client's details.
| b****ird
|    Canada
Fixed Price: About $25   |  Posted: Dec 08, 2015  |  Closed  |   1 Proposal
I have already the code and everything, just need to change some values and run it. This task is urgent now and start and finish within an hour Thanks
Category: Electrical       
Skills: MATLAB       

a****a24
 [?]
Sign in to view client's details.
| a****a24
|    United States
Fixed Price: Less than $500   |  Posted: Dec 07, 2015  |  Closed  |   6 Proposals
Hi writer I have a small niche site review for amazon.com , my product is : induction cooktop I need 2 articles and will pay 5$/articles , with 700 words /article Article 1 (5$ ~ 700 words) : Compare induction cooktop vs gas cooktop ? with key word : induction cooktop vs gas Article 2 (5$ ~ 700 words) : Compare induction cooktop vs electric cooktop ? with key word : induction cooktop vs .electric Key requirements : - Content must be 100% unique and must contain nearly error-free spelling and grammar. - Strong English writing skills. - Experience with SEO-writing ? In particular, you will need to write each article title in such a way that it is optimized for search engines (i.e. you should strategically select titles that contain phrases and keywords that receive at least some search volume from Google)
Category: Article Writing       
Preferred Location: Philippines

h****oon
 [?]
Sign in to view client's details.
| h****oon
|    Vietnam
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Dec 06, 2015  |  Closed  |   15 Proposals
Hello, my name is Russ, I live in Sarasota and I would like for you to give me a price to build a small project for me. I would like to have two potentiometers control two stepper motors. Please see attachment
Category: Electrical       

f****225
 [?]
Sign in to view client's details.
| f****225
|    United States
Hourly Rate: Less than $10 / hr   |  Duration: Not Sure  |  Posted: Dec 03, 2015  |  Closed  |   4 Proposals
I need a program in Allen Bradley rs logix 5000 for the crystallization process of sugar.i want the program for only one batch.There are approximately 6 control valves.All info will be provided.
Category: Electrical       
Skills: PLC & SCADA       

d****n14
 [?]
Sign in to view client's details.
| d****n14
|    Mauritius
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: Dec 02, 2015  |  Closed  |   6 Proposals
I need to solve three problems for the course "semi conductors" it does not seem to be hard, but I have to travel and I have no time to spend on it.
Category: Electrical       
Skills: Semiconductor       

f****230
 [?]
Sign in to view client's details.
| f****230
|    United States
Fixed Price: Less than $500   |  Posted: Dec 02, 2015  |  Closed  |   10 Proposals
We are looking for Smart home automation with capacitive touch buttons and with remote Specification : 4 touch button control to operate lights( on & off + dimming control and fans ( on & off + regulate the fan speed). Components of this project should be economical and readily available For the Switching please use SCR family devices( Traic , Mosfet , thyristors etc ) It should also be controlled using ir or rf control remote Deliverable: Schematic BOM Source code
Category: Electrical       

****
 [?]
Sign in to view client's details.
| Client
|    Oman
Fixed Price: Less than $500   |  Posted: Dec 02, 2015  |  Closed  |   3 Proposals
mistake lab1 Matlab question 1c lab2 prelab(mathematical calculation) question 1f-part d (part "f" we need to repeat all from a-e and "d" part is wrong) prelab question 2,c,d,e,f. Matlab part needs to be updated.
Category: Electrical       
Skills: MATLAB, Matlab signal processing       

x****iee
 [?]
Sign in to view client's details.
| x****iee
|    Sweden
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Dec 01, 2015  |  Closed  |   8 Proposals
A CO2 controller for Rooftop Units- RTUs for commercial buildings. Application will be on single phase, 208 volt RTUs with economizer. All applications will be on 5 ton or smaller RTUs with single phase blowers. I need a CO2 controller that will work along side of the Fanhandler   [obscured]  /index.php/applications/hvac-whisperer The controller needs to measures the return air CO2 concentrations and modulate the outside air damper/economizer's actuator until the CO2 concentrations have come back under the required concentrations. The controller will only need to function during the heating cycle. During the cooling and economizing cycles the CO2 controller will be in the waiting/off mode "Advanced Rooftop Controllers" always incorporate CO2 controls as a part of their systems.   [obscured]  /
Category: Electrical       
Skills: Electronic Design, Digital Electronics       

j****bel
 [?]
Sign in to view client's details.
| j****bel
|    United States
Fixed Price: More than $10,000   |  Posted: Dec 01, 2015  |  Closed  |   6 Proposals
ONLY FOR PEOPLE LIVING IN SHENZHEN OR CLOSE TO SHENZHEN !!! We are business men from Denmark. We arrive in Shenzhen on December 12 and on this occasion, we would like to arrange some meetings with people who manufactures power bank. If you are the one we are looking for, we will be grateful to you for contacting us as we seek a permanent, reliable, loyal and wonderful cooperation partner.
Category: Electrical       
Skills: Electronics       

M****MoG
 [?]
Sign in to view client's details.
| M****MoG
|    Denmark
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Nov 30, 2015  |  Closed  |   12 Proposals
Assistance is needed in designing a device that will be attached to an agricultural planter for sensing and recording soil parameters as the machine travels through the field.
Category: Electrical       
Preferred Location: North America

d****och
 [?]
Sign in to view client's details.
| d****och
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Nov 30, 2015  |  Closed  |   28 Proposals
Multidicipline AV / IT / Security Consulting firm looking for a reliable, dependable, AutoCAD fluent person to develop (corporate) interior facilities, primarily general office space and specialty conference rooms. Arcitectural backgrounds are provided to us, by the project architect. AutoCAd work includes basic facility and electrical plans, reflected ceiling plans, elevations, cable / riser drawings, power / data / telecom and system flow drawings and the associated (architectural) details. Any background in technical design / lite engineering of AV, Telecommunciations and/or Security systems is a plus.
Category: Architecture       
Skills: AutoCAD       

C****123
 [?]
Sign in to view client's details.
| C****123
|    United States
Fixed Price: Not Sure   |  Posted: Nov 30, 2015  |  Closed  |   17 Proposals
We are renovating an apartment formed by joining 2 adjacent 2 bedroom flats, the total carpet area being approx 1600 Sq ft and looking for a complete design, detailed drawing, material selection and BoQ to be done by an experienced interior architect. Ideas will be provided through sketches and will be available on skype/phone/hangout Design for finishing and furnishing of an existing apartment. The scope would include Change in existing layout(Plan): The layout needs to be personalised as per need. Bill of Quantity Detailed drawing: Elevation of each wall showing the fitment of luminaries, electrical switched and other fitment. Wiring diagram Gypsum design on ceiling and wall junctions Luminaire Kitchen design Flooring designs Bathroom Designs Living room Bedrooms
Category: Architecture       

i****rss
 [?]
Sign in to view client's details.
| i****rss
|    India
Fixed Price: Less than $500   |  Posted: Nov 30, 2015  |  Closed  |   15 Proposals
Hello I need someone who can make me a new PCB of the (netduino 3 ethernet). The only reason is I would like to combine my shield with it, so it will become 1 PCB. What needed to be delivered, Schematics, PCB Files, BOM Also you must check if all the parts can be purchased Preferable in Altium
Category: Electrical       

d****mps
 [?]
Sign in to view client's details.
| d****mps *
|    Jordan
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job