Save this Search
     

All JobsElectronic Design

 (112 results)  
Sort by:
  • Posted Date
Results for 'Electronic Design'
Fixed Price: Not Sure   |  Posted: Aug 21, 2015  |  Ends: 5d, 2h  |   7 Proposals
I need help designing a product that will throw/lunch a football using compression and RFID to determine target. This support is just to build the blue print for the product and help identify the best method of achieving said goal. Below is the description of what the final product will do This device is a machine that replaces the need of having a quarterback or someone to throw a football during practice or fun. The machine throws footballs to its intended target based on RFID technology and selected patterns picked by the player. This machine give players the ability to play backyard football with as little as 2 players or can be used by a wide receiver to prefect his route running. Picture this: Four kids in backyard, One team with RED RFID wrist band that and the other team with Blue RFID wrist band. Each band is tractable by that the Elway. To start the game, each member of the red team selects a pre-programed route that he wants to run. Player 1 selects 10 yard post, Playe...
Category: Product Design       

j****kor
 [?]
Sign in to view client's details.
| j****kor
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 21, 2015  |  Ends: 4d, 21h  |   15 Proposals
We are a start-up (  [obscured]  ) developing and manufacturing integrated micro-electronics circuits (chips) that are used by scientific community to study neurons and in particular neuronal networks and retina. For instance, a network of neurons derived from stem cells can be cultured on our chip up to form a sort of "mini-brain" and then our chip is able to sense the electrical activity of the neurons (which is the language used by neurons to communicate) in order to study neurodegenerative diseases such as Alzheimer's Disease. Our devices represent the interface between the neuro-biological world and the digital-electronic world. The novelty is that our chip integrates thousands of sensors (each sensor can interface with a neuron, hence we can read-out from thousands of them), while past devices had only ~60 sensors. We need an illustration (either 2D or 3D) to express these two main concepts: (i) neuro-chip interface and (ii) high-resolution. The illustration should sh...
Category: Illustration       

t****ain
 [?]
Sign in to view client's details.
| t****ain
|    Switzerland
Fixed Price: $1,000 - $5,000   |  Posted: Aug 21, 2015  |  Ends: 4d, 19h  |   14 Proposals
We need a digital scale (we will provide the scale base and load cells) with a tablet as weighing display. The display should connect with an external A/D conversion device then connect to the scale base with a cable. The tablet should come with an application processing the data collected from the scale base. The scale is designed for bars. It is used to weigh wine bottles to check inventory every day. The user scan the bar code on the bottle and input the data into the application. The app will show the picture of the bottle and speak out the name of the wine. Please check the attached app design. Final delivery will include the schematics, firmware and the application. A demo sample is also required. Thanks, Edward
Category: Data Engineering       
Skills: Manufacturing Design, Electronics       

e****pan
 [?]
Sign in to view client's details.
| e****pan
|    United States
Hourly Rate: Not Sure   |  Duration: 3-4 weeks  |  Posted: Aug 20, 2015  |  Ends: 4d, 15h  |   6 Proposals
I have developed a new fitness product that uses air powered cables and bluetooth handles to adjust the weight.   [obscured]   We are now at the CE and UL certification stage. We are looking for an engineer to help manage the certification process and if done well, we hope this engineer decided to stay on for ongoing design and manufacturing. Please look at the website video and then let me know if you are interested. Include your experience with CE and UL products or process. -Brandon
Category: Other - Engineering &...       
Preferred Location: United States

i****fun
 [?]
Sign in to view client's details.
| i****fun
|    United States
Hourly Rate: $10 - $20 / hr   |  Duration: 3-4 weeks  |  Posted: Aug 20, 2015  |  Ends: 4d, 13h  |   18 Proposals
We are an Australian based Start Up company with two software designers building a web based application. We require a software consultant to review our current development and provide our team with a basic action plan of the next stages. This will assist our management team with timeframes and budget forecasts. We require: - A meeting with our team via Skype and Teamviewer (or similar) to review of our current development - A basic action plan/road map of the next software development stages (including what stage we are currently at) - An estimated timeline based on standard practise Our team is using HTML5, CSS3, PHP, MySQL and jQuery and to date we have completed: - Wireframe - Framework - Interface Components - Database Design We are currently working on: - Pages - PHP > Database Processing However we have not started on the: - Secure Authentication - API Integration About you. You will: -Possess a general understanding in the areas of software development, responsive ...
Category: Other IT & Programming       
Skills: MySQL Administration, CSS, PHP, HTML5, JQuery Mobile       

p****fit
 [?]
Sign in to view client's details.
| p****fit
|    Australia
Fixed Price: $1,000 - $5,000   |  Posted: Aug 20, 2015  |  Ends: 4d, 13h  |   26 Proposals
I need an electrical engineer to help me design a small ultrabright LED prototype product for my clothing line. I have 3D renders completed and a basic idea of what I want in the electrical platform. Although, I do need the entire interior electrical platform built for this product. I am hoping to get the prototype built and a small product run completed at least 12 working units. This is a pretty simple design and functionality. I am also looking to have this completed in the $1000-$2000 range. I look forward to hearing back from you all.
Category: Electrical       

O****lic
 [?]
Sign in to view client's details.
| O****lic
|    United States
Hourly Rate: Not Sure   |  Duration: 3-4 weeks  |  Posted: Aug 20, 2015  |  Ends: 4d, 4h  |   8 Proposals
I am looking to get help with a project that will require controlling up to 20 servo motors with specific logic. There will be wiring involved and programming of an arduino or motor controllers. Candidate must be from the San Diego area and be able to go on site at some point and help get the product up and running. I don't anticipate more than a couple days at the customer location.
Category: Electrical       
Skills: Electronics, Computer-Aided Design, Arduino       
Preferred Location: United States

h****e33
 [?]
Sign in to view client's details.
| h****e33
|    United States
Fixed Price: Not Sure   |  Posted: Aug 20, 2015  |  Ends: 3d, 21h  |   4 Proposals
Hi we are looking for a flash coder that will be able to create electronic scratch cards. For more info inbox us.
Category: Other - Design       
Skills: Adobe Dreamweaver, Adobe Flash       

B****fin
 [?]
Sign in to view client's details.
| B****fin
|    South Africa
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 20, 2015  |  Ends: 3d, 19h  |   6 Proposals
I am looking for a talented Electrical Engineer to design a electronic device based on provided requirements and tolerances. The final product will delivered as detailed design documents and full BOM for the device. Will look to have an ongoing relationship with the designer to improve the design post prototype stage.
Category: Product Design       
Preferred Location: Western Europe

g****502
 [?]
Sign in to view client's details.
| g****502
|    United Kingdom
Fixed Price: Less than $500   |  Posted: Aug 20, 2015  |  Ends: 3d, 16h  |   0 Proposals
we manufacture stability chambers for pharmaceutical industry. We have our own 21 CFR software for data download. We wish to have it certified for complaince by a third party. Can you help us??
Category: Electrical       

o****123
 [?]
Sign in to view client's details.
| o****123
|    India
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 20, 2015  |  Ends: 3d, 16h  |   0 Proposals
We have already created a website we need a programmer who can change and add content, add promotions, make the website responsive, and fix some glitches,
Category: Other - Engineering &...       

K****owd
 [?]
Sign in to view client's details.
| K****owd
|    United States
Fixed Price: $20,000 - $100,000   |  Posted: Aug 19, 2015  |  Ends: 3d, 11h  |   19 Proposals
I am designing a modern electronic calculator with built in functions for the energy industry. this project will involve: System requirement analysis system architecture electronic, hardware and software requirement analysis electronic, hardware and software design system test system integration electronic, hardware and software test electronic, hardware and software integration electronic construction hardware construction software construction
Category: Product Design       

M****rgy
 [?]
Sign in to view client's details.
| M****rgy
|    United States
Fixed Price: Not Sure   |  Posted: Aug 19, 2015  |  Ends: 3d, 9h  |   10 Proposals
A start up company is looking to introduce a new brand into a fairly competitive electronics market. Need help in improving and executing an e-commerce marketing plan with a focus on increasing brand awareness and customer acquisition. We have a preliminary marketing plan. Need experienced and creative professionals to give us a review of directions and to prioritize the marketing activities. We'll also need assistance in implementing the plan on a monthly basis as we don't have designated marketing personnel in house. Our main geographic focus is USA therefore prefer local marketers. Need Elancer with expertise in: B2C marketing, inbound marketing, and social media management, email marketing and possibly guerrilla marketing.
Category: Marketing Strategy       
Preferred Location: United States

v****oat
 [?]
Sign in to view client's details.
| v****oat
|    United States
Hourly Rate: Not Sure   |  Duration: 1-2 weeks  |  Posted: Aug 19, 2015  |  Ends: 3d, 1h  |   9 Proposals
I'm looking for a long term cooperate relationship with someone who could provide me content writing. I'm a website solution provider, I have a few website needs to write content. Here's what my requirement: 1st website: This website is being designing, but I have some company introduction, quality control system, technology introduction and owner story to write. Here's my option: 1ST, I provide different articles, you mix them together and become something I want, I will told you what I want of course. 2ND, I provide keywords, you write article for me. Pls quote in different options.This website is about USB cable,bluetooth speaker etc electronics products 2ND website: This website has been produced. But I need to do some SEO thing, like content marketing. Still two options,1ST, I provide different articles, you mix them together and become something I want, I will told you what I want of course. 2ND, I provide keywords, you write article for me. Tell me what's the price for differ...
Category: Technical Writing       

e****777
 [?]
Sign in to view client's details.
| e****777
|    Japan
Fixed Price: Not Sure   |  Posted: Aug 18, 2015  |  Ends: 2d, 11h  |   6 Proposals
I am looking for a product designer to design the casing for our new amplifier. We are really looking for a B&O style design, it must be sleek and simplistic. We are hoping to use electroplated Aluminum for the case as well as some acrylic. Please add a portfolio of items you have designed in the past. WE DO NOT NEED SCHEMATICS or CAD Drawings - RENDORS ONLY.
Category: Other - Design       

A****rth
 [?]
Sign in to view client's details.
| A****rth
|    United Kingdom
Fixed Price: $500 - $4,500   |  Posted: Aug 18, 2015  |  Ends: 2d, 2h  |   12 Proposals
Seeking engineer well experienced in bluetooth devices for smartphones that can provide a consolidated and refined schematic and firmware. **Board layout, assembly and testing will be handled here.** ***Please review your quotes for price and delivery. The tasks here do not require a man month to complete as you are working off of a reference design*** Need firmware refinement and adaption of a Microchip Technology RN-52-EK Development kit coupled with barebones Arduino board. Basically a bluetooth device that controls music/audio on Iphone/Android phones, and or pick up/answer incoming calls (Arduino needed to handle switching modes) Most of the control and features are currently demonstrated in the kit with an iphone, but has some issues with Android phones.The working prototype will be provided to assist the work. switches, mic, speaker, and vibration motor have been selected for working model. An NDA will be required. A Product requirements document will be provided when proje...
Category: Electrical       
Skills: Electronics, Bluetooth, Digital Electronics       

m****ner
 [?]
Sign in to view client's details.
| m****ner
|    United States
Fixed Price: Less than $500   |  Posted: Aug 18, 2015  |  Ends: 1d, 17h  |   9 Proposals
Company Introduction We are a leading provider of eLearning content for US schools. Over the last 10 years, we've developed content for grades K?12 across the entire range of subjects including ELA, Math, Science, Social Studies, for Core Curriculum, Electives, CTE, AP, etc. Requirement We are currently developing HS World History lessons for US high school students that maps to the Common Core standards. This project will continue for next 4-6 months and will have regular work for the SMEs. The content will be in electronic form, and the courses will be delivered online to students. The lessons in these courses will will include tutorials and assessments. The main tasks in the project include: ? Writing the lessons designs in MS Word templates, which will include a combination of instructional text and interactions, and a set of objective assessment items to test students. These lesson storyboards will include the audio and onscreen content, and also detailed descriptions of the e...
Category: Academic Writing       
Preferred Location: North America

v****pte
 [?]
Sign in to view client's details.
| v****pte
|    India
Fixed Price: More than $10,000   |  Posted: Aug 17, 2015  |  Ends: 1d, 7h  |   33 Proposals
I have a project that needs a couple of UI/UX designers. The job is about electronics including cameras and cell phones, and they need designers to find best matched targeted customer demographics. They need you to design the user experience, and come up with solutions how to best sell to them. The other few projects are software and hardware user designs. You don't have to have exactly the same product experience. But as an ideal candidate, you have to have one of the following: 1) long term experience; 2) short-term experience but exceptional talents. You are creative.
Category: Design Project Management       
Preferred Location: United States

a****rey
 [?]
Sign in to view client's details.
| a****rey
|    United States
Fixed Price: Not Sure   |  Posted: Aug 17, 2015  |  Ends: 1d, 3h  |   4 Proposals
In need of someone who has experience writing for the electronics category. Our website   [obscured]  /v5y31x needs content written. You'll need to be a self starter and write with minimal guidance. Each product listed in the website has a page in Amazon from which you can get information to work with. You can take the matching info from each Amazon product and tweak it to fit in our website. The writing should be friendly and easy to read. Amazon page   [obscured]  /vyy31x If you have any questions please let me know.
Category: Technical Writing       

D****ign
 [?]
Sign in to view client's details.
| D****ign
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 17, 2015  |  Ends: 1d, 2h  |   11 Proposals
Experienced, capable CAD and Excel freelancer sought to create device arrangements on a plan drawing, from these to generate cable diagrams, and finally to extract attribute data from these drawing blocks to create a cable list. The project is a building services electrical system design, so delivery will be of all required drawings and cable lists. General system design will not be required. This work is for several systems on the same site, so potentially 80+ hours of work. The successful applicant should demonstrate experience with this type of work, some examples of previous projects of this nature, and competitive pricing. Accuracy, strong communication skills, good English and a strong work ethic are sought - the project has a short timeline.
Category: CAD       

l****us4
 [?]
Sign in to view client's details.
| l****us4
|    United Kingdom
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 17, 2015  |  Ends: 1d, 2h  |   20 Proposals
Looking for someone to design the layout for a PC Board. The product is solar light that is about 2.5" diameter. Please attach samples with your bid. Thanks
Category: Product Design       

C****d77
 [?]
Sign in to view client's details.
| C****d77
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 17, 2015  |  Ends: 1d, 1h  |   3 Proposals
we are a small company based in Mexico that deals with custom repairs and modifications to railroad box cars, we are looking for someone who can design an electron beam welder based on metalicarap. the main requirements for the electron beam gun project are: -smallest size possible. -autocad file of the gun -the gun has to be easy to assemble with clear instruction on the assembly. -it has to use the power supply already developed for the metalicarap (in the future we may hire someone for a better development of a more efficient power supply). -the materials for the EB gun also have to be the ones that are specified for the metalicarap. -the gun has to run for 30 hours continuously. -life time of materials before replacement(cathode, wehnelt, etc).
Category: Product Design       

c****234
 [?]
Sign in to view client's details.
| c****234
|    Mexico
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 17, 2015  |  Ends: 1d, 0h  |   10 Proposals
I need some help designing boards for some high end hifi equipment. The aim is to design a slim line amplifier with both analog and digital inputs, inc a phono stage.
Category: Electrical       

A****rth
 [?]
Sign in to view client's details.
| A****rth
|    United Kingdom
Fixed Price: $500 - $1,000   |  Posted: Aug 16, 2015  |  Ends: 15h, 18m  |   6 Proposals
We are looking for a fire alarm engineer/consultant that has at least 5 years experience in the fire alarm industry. - Must be familiar with Canadian building and fire alarm codes. - Knowledge of Fire Detection and Alarm Systems for a wide range of analogue addressable control panels and the associated detection devices is an asset.
Category: Electrical       

l****ydc
 [?]
Sign in to view client's details.
| l****ydc
|    Canada
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job