Save this Search
     

All JobsElectronic Design

 (168 results)  
Sort by:
  • Posted Date
Fixed Price: Not Sure   |  Posted: Jun 29, 2015  |  Ends: 10d, 2h  |   4 Proposals
Good afternoon, I am looking to develop an ultra lightweight, portable fully USB powered monitor system for business executives and other mobile professionals to use whilst on the move. In short, I am looking for someone to fully design and engineer a portable monitor with the following properties: 1. 10 - 14 inches in size 2. Fully USB powered (no power outlet required) 3. Minimum 720 resolution 4. Ultra lightweight (less than 1kg is a must) 5. Ultra thin (1-2cm max) 6. Free standing / in-built kick stand 7. Protective case / shell for transportation 8. USB 2.0 + compatible 9. Compatible with all modern operating systems Whilst a very brief overview, hopefully this provides you with a basic understanding as to what I am after to allow you to consider if your skill set would be appropriate for the project. By way of reference, below are a couple of links to existing competitors in this space which I am seeking to compete against. If you feel that your skill set would be appro...
Category: Electrical       

t****y86
 [?]
Sign in to view client's details.
| t****y86
|    United Kingdom
Fixed Price: $1,000 - $5,000   |  Posted: Jun 29, 2015  |  Ends: 20d, 15h  |   5 Proposals
Describe it To Me is a fun, multi-level game, created to help improve the receptive and expressive language skills in children and adults. Designed by a certified speech-language pathologist, Describe it To Me employs a game show atmosphere to engage clients in their learning while incorporating a variety of questions designed to help clients build a deeper understanding of everyday items. Designed to facilitate a deep semantic understanding, each picture stimulus has six (6) questions designed to probe and teach a deeper level understanding of these everyday items. In addition to teaching semantic knowledge to children, Describe it To Me can be used to facilitate rebuilding semantic knowledge in adults. Perfect for all levels from beginning categorization skills to deeper level language skills, Describe it To Me is sure to be a great app for the busy speech-language pathologist, teacher, parent, or caregiver.
Category: Business Plans       

v****686
 [?]
Sign in to view client's details.
| v****686
|    India
Fixed Price: $500 - $1,000   |  Posted: Jun 29, 2015  |  Ends: 24d, 19h  |   4 Proposals
- Proximity of 1-2m range - Custom proximity sensor that can act as a switch to 'do something' on an ipad. An example would be your cat walks within 1-2m range of your ipad and the ipad plays a 'meow' audio file. Must also be familiar with iOS language and programming
Category: Electrical       
Skills: Electrical Engineering, Electronics       
Preferred Location: Eastern Europe, India/Southern Asia, Middle East & Central Asia

L****ner
 [?]
Sign in to view client's details.
| L****ner
|    United Arab Emirates
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 29, 2015  |  Ends: 9d, 15h  |   10 Proposals
Looking for experienced candidates required for estimating take offs: 1. Floor and wall tiling 2. Stones 3. Waterproofing Preference for: 1) Knowledge of Planswift 2) Knowledge of Australian Building Standards 3) MS Office skills Freelancer required for regular take offs to efficiently prepare quantities breakdown and provide summary. Regular take off required ranging from small to large commercial jobs. Thanks.
Category: Other - Engineering &...       

Q****s34
 [?]
Sign in to view client's details.
| Q****s34
Fixed Price: $25 - $35   |  Posted: Jun 28, 2015  |  Ends: 9d, 10h  |   14 Proposals
I need a brochure that can be sent electronically. I have attached an example we will follow however, the one I need designed will not be as extensive. Only expect there to be 4 pages. The first page with image and logo I already have designed. You just need to place it and perhaps make a few small relocations. Must have completed by July 5.
Category: Graphic Design       

A****MER
 [?]
Sign in to view client's details.
| A****MER
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 28, 2015  |  Ends: 9d, 6h  |   27 Proposals
Programming of microcontrollers as well as PCB design and software review. I am based in worcester ma.
Category: Electrical       

S****gal
 [?]
Sign in to view client's details.
| S****gal
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 28, 2015  |  Ends: 9d, 6h  |   7 Proposals
Programming of microcontrollers as well as PCB design and software review. I am based in worcester ma.
Category: Electrical       

S****gal
 [?]
Sign in to view client's details.
| S****gal
|    United States
Fixed Price: $2,000 or less   |  Posted: Jun 28, 2015  |  Ends: 8d, 22h  |   19 Proposals
Device functionality: -Soil moisture and PH sensor probe (non-corrosive) planted into ground -Daily soil moisture and PH Readings transmitted via SMS to mobile phone -Solar power as primary source with battery cell as secondary source -Power on only when a reading is to be taken -GPS tracker -Data not stored on device -Housed in waterproof casing Requirement: Construct a finished circuit prototype that fits my external design outline. External design illustration will be provided to shortlisted candidate
Category: Product Design       

N****n_A
 [?]
Sign in to view client's details.
| N****n_A
|    United Kingdom
Fixed Price: $1,000 - $5,000   |  Posted: Jun 26, 2015  |  Ends: 7d, 4h  |   34 Proposals
I need some experienced hands to help us write a desktop application and also a SaaS. It will be an Electronic Medical Records (EMR), have a dynamic database, and the person(s) who win the tender will be able to help us from design, implement and the upkeep of the software. The software has to have the capability of connecting to other Medical software already in use. If interested, please get in touch and i will offer more in-depth details.
Category: Software Application       
Skills: Java, PHP       

j****o51
 [?]
Sign in to view client's details.
| j****o51
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: Jun 26, 2015  |  Ends: 22d, 3h  |   23 Proposals
Short description: In this system, each table in the restaurant gets a battery powered wireless calling device with buttons. When pressed, this calling device sends a wireless zigbee or generic 2.4GHz message that will be received by one or more of the base stations of the system, which are based on Raspberry PI A+. The master base station memorizes the call status for each transmitter so that said information can later be polled over wifi and displayed by apps run in smartphones worn by the waiters. The apps for said smartphones are developed in a separate project ? you don't have to develop them. Deliverables for this project: ? For the calling device; scematics, PCB layout, MCU firmware ? For the Raspberry base station; software (including installer script that makes the software start upon boot) All software must be delivered with source code, and all source code must be professionally written and well documented in English. Suggested milestones (open to discussion before proje...
Category: Electrical       
Preferred Location: Eastern Europe, India/Southern Asia, Eastern Asia

I****tor
 [?]
Sign in to view client's details.
| I****tor
|    Sweden
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 26, 2015  |  Ends: 7d, 3h  |   7 Proposals
I am looking to improve conventional HFAC (air conditioning system) Controller. I need design for the board and prototype made if needed. The system will do the following Input 120VAC and 240VAC / Output 24VAC Board will receive input from 8 thermostats which send 24VAC signal to Board When Signal is received the Board needs to start (using relay) High Voltage Motors (blowers) and in some cases also send 24VAC to another device. Board needs to be connected to Network using Ethernet Cable All of these rules need to be configurable in some software utility Board needs to be connected ready OHM from Temperature sensors (8 of them ) Board needs to be able to receive information from network for each 8 zones about Requested temperature. Board needs to make decisions as to if temperature is ABOVE requested then DO THIS if below THEN DO THIS. Programmable on board. This is the first time I am designing a board so I will need assistance and iterations.
Category: Product Design       

T****ORP
 [?]
Sign in to view client's details.
| T****ORP
|    United States
Fixed Price: $100 - $500   |  Posted: Jun 26, 2015  |  Ends: 7d, 1h  |   8 Proposals
Topbuy.pk Ecommerce Store of all type consumer electronics and clothing apperals Need a custom made theme on magento or any other good platform which is SEO Friendly and easy to operate Requirements: The website should meet to all international standard for example Daraz.pk . The total website product will be 20,000 but on initial basis there will be 3000 to 40000 . The Wesite should be responsive, e.g shop.ca . The theme should simple and in light in colours e.g   [obscured]  / , or kindly check the attachment for example or any other your suggestion .?? . Back end should be SEO friendly and easily operatable, e.g magento or any other custom made but it should be easily operatable . There should be Landing pages for categories . There should be filters for the product . Need a real time search in it . Complete art work logos, posts of landing pages, . Online customer support portal e.g zopim or any good platform . There should be a separate blogging page on w...
Category: Web Programming       
Skills: PHP, Web Design, Magento, Web Development, Woocommerce       

T****buy
 [?]
Sign in to view client's details.
| T****buy
|    Australia
Fixed Price: Not Sure   |  Posted: Jun 25, 2015  |  Ends: 6d, 13h  |   2 Proposals
Hello, I am looking for a small project development of "Micro SD Memory Card Write Protection On & OFF with Password Protection". Basically I would like to protect the data which i have copied to Micro SD Card from Delete, Format. So, kindly bid for the above who are interested to do the above project in Embedded Systems.
Category: Product Design       

C****ONE
 [?]
Sign in to view client's details.
| C****ONE
|    India
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 25, 2015  |  Ends: 58d, 12h  |   29 Proposals
Hi! I have a great idea that i want to produce. I wanted to know if you can help me engineer, manufacture, and execute this idea. Thank you very much.
Category: Product Design       

A****131
 [?]
Sign in to view client's details.
| A****131
|    United States
Fixed Price: $500 - $1,000   |  Posted: Jun 25, 2015  |  Ends: 21d, 9h  |   25 Proposals
I have a prototype, but need someone that can make a battery to last longer and someone to make its design more clean and smaller. If anyone has experience please get in touch with me as soon as possible.
Category: Electrical       

M****539
 [?]
Sign in to view client's details.
| M****539
|    United States
Fixed Price: Less than $500   |  Posted: Jun 25, 2015  |  Ends: 6d, 6h  |   27 Proposals
Requires on off switch or method for going into sleep mode. The circuit board and components need to be as small as possible.
Category: Electrical       

s****ell
 [?]
Sign in to view client's details.
| s****ell
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 25, 2015  |  Ends: 6d, 5h  |   8 Proposals
We are looking for someone extremely well educated, most likely an engineer, who has worked with either the technical aspects of biomass enough to understand the complexities of generating electricity from agricultural waste, or someone with extensive experience with fuel procurement related to biomass. We are an international renewable energy development company looking for a resident expert in all things biomass to keep on our company roster and payroll.
Category: Other - Engineering &...       

A****ner
 [?]
Sign in to view client's details.
| A****ner
|    United States
Fixed Price: Less than $500   |  Posted: Jun 25, 2015  |  Ends: 6d, 5h  |   64 Proposals
Our brand is Life Force Accessories, offering premium smartphone accessories. Our design is real simple and high-tech. We offer exceptional customer service and play that up with all of our design, calling it 'The Life Force Guarantee'. Our first product is the selfie stick and our promotional theme for the selfie stick is 'Do It Your Selfie'. We need a WordPress themed design for our website to showcase our brand and product. We have a great template for you to follow with full instructions, see below! I already own my domain and have hosting. I will need a basic blog site with some e-commerce features, like a 'buy now' type button that links directly to my listing on Amazon. Design Type: New Website Purpose of the WordPress Website: Blog to Publish Articles Number of Pages to be Designed: 6 or more Description of Each Page: Home, About Us, Contact Us, Blog, Press, Our Products (Our Products will link directly to our Amazon product listing until we get more products) Websites ...
Category: Website Design       
Skills: WordPress       

n****ane
 [?]
Sign in to view client's details.
| n****ane
|    United States
Fixed Price: Not Sure   |  Posted: Jun 25, 2015  |  Ends: 6d, 3h  |   14 Proposals
design is already made in proteus 8, only two things need getting sorted Move switch 1 inch below, move 5 pins header to further side
Category: Electrical       

B****rat
 [?]
Sign in to view client's details.
| B****rat
|    United Kingdom
Fixed Price: Less than $500   |  Posted: Jun 25, 2015  |  Ends: 5d, 14h  |   8 Proposals
Looking for renderings of our initial product designs for use in marketing materials and sending to manufacturers. Experience in design and product development of fitness / consumer products preferred. Person must understand the technology and develop & design the system within 4 weeks. Will send out full project details upon request Sincerely! North Lion Team
Category: Product Design       

N****oup
 [?]
Sign in to view client's details.
| N****oup
|    United States
Fixed Price: $50 - $150   |  Posted: Jun 24, 2015  |  Ends: 5d, 12h  |   13 Proposals
Need to design an Ultrasonic motion sensor and notfyer to be installed in the wheel arches of a car. Need the design to be able to build the unit myself. This project is to avoid parking tickets my creating notification when a parking officer marks my car tyres with chalk. When the parking officer moved their hand under the wheel arch the movement will be detected and I will be notified by text, email or key fob beeper. ( Range required approx 500m and within a building) The sensor could be mounted under the wheel arches ( the 2 front) or on the body of the car above the wheel arches. Ideally the components to build the project will be less that $250 and be available from online sellers. I imagine Arduino or rasberry pi will be the best options for a controller. Ideally the unit will be battery powered so I dont have to wire it into the car. With the bulk of the unit being attached to the dash an an on off switch so I can arm the unit when I get out of the car. Ideally the plans ...
Category: Electrical       
Skills: Electrical Engineering, Electronics       

m****b33
 [?]
Sign in to view client's details.
| m****b33
|    Australia
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job