Save this Search
     
Sort by:
  • Posted Date
Posted: Within 7 days
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 2h, 5m ago  |  Ends: 14d, 21h  |   1 Proposal
We are looking for someone that can design our investor's deck. We are not locking for very creative design because the message is very clear and it is a B2B service. We are looking for a deck that can tell our story in the best way. Our presentation is almost ready (the content) and it will be around 12-14 slides. Please specify how long it should take and what will be the cost. One of the thing that is mandatory for us is the ability to have voice communication and not just electronic.
Category: Presentations       

s****ter
 [?]
Sign in to view client's details.
| s****ter
|    United States
Fixed Price: $500 - $1,000   |  Posted: 3h, 4m ago  |  Ends: 14d, 20h  |   0 Proposals
I am working on a software that required designing and building a new scanner different from the conventional one. Anyone with expertise in Electronics and Java integration would be welcome. Communications and Promptness is very important to me. If you do not have these please do not respond
Category: Other - Engineering &...       

S****abs
 [?]
Sign in to view client's details.
| S****abs
|    Belgium
Fixed Price: $500 - $1,500   |  Posted: 3h, 38m ago  |  Ends: 14d, 20h  |   1 Proposal
Hello, Need design schematics with proper rf shielding, interference protection circuitry for 865-867 Band with 200 KHz spread. Module should have a processor and ample memory. Lorawan (  [obscured]  /labs/zurich/ics/lrsc/lmic.html) needs to be emdedded in it. Provision for connecting to RS232 + RS485 Interface You can use sample desgin which are provided by semtech as starting point (  [obscured]  /product-search/en?vendor=0&keywords=SX1276MB1MAS) Power Requirements The offered hardwares should capable of operating on three phase supply drawn from the meter input itself. Auxiliary power supply will not be acceptable. The hardware shall have three phase AC input supply and should be capable of proper functioning within the power supply range of 77 AC P-P to 470V AC P-P, 50 Hz hardware should also be capable of operating on single phase 230V, 50 Hz power supply. The hardware shall be suitably protected against surges. Average Power consumption of th...
Category: Product Design       
Skills: Electronics, RF Design       

S****Vai
 [?]
Sign in to view client's details.
| S****Vai
|    India
Fixed Price: $30 - $40   |  Posted: 3h, 48m ago  |  Ends: 14d, 20h  |   0 Proposals
Your challenge is to create brief sounds for an android app that sound futuristic and "cool". These are brief and fast with a rhythm, and call to mind the door latch of a very expensive car, or the inner workings of a finely tuned mechanism being activated, or the mechanical part of some high tech automatic device. By brief, the sounds can be a tenth of a second up to two seconds long. The things you imagine the sounds to come from should be expensive, brand new, a gadget that everyone wishes they had. Imagine a robotic device that creates a cocktail, or some high tech weapon being cocked or armed by a high-tech spy. For a few examples, there can be a mix of electronic beeps and mechanical sounds, but most should be all mechanical sounds. Imagine "James Bond" devices like: -Machine/Mechanical Clicks and latches -Whirring (like an electric motor) -Laser gun firing -Electronic chirps (like data communication) Once you get a sound you like, make a second varia...
Category: Other - Multimedia...       
Skills: Music, Sound Design, Sound Effects       

s****ert
 [?]
Sign in to view client's details.
| s****ert
|    United States
Fixed Price: About $20   |  Posted: 6h, 29m ago  |  Ends: 14d, 17h  |   1 Proposal
This is only scoping and quotation request - Also Send proof of work First, I would like you to assess the information that I have and indicate what you will need in order to perform a feasibility report that could also to be used to attract investors. Second, Also what you can provide in order to get this done. Last how much it will cost for you to do this. The attachment are just background info, I do have coordinates, also irradiation levels, temperature, wind, precipitation etc. Grid information
Category: Other - Engineering &...       
Skills: Manufacturing Design, Electronics       

r****ant
 [?]
Sign in to view client's details.
| r****ant
|    South Africa
Fixed Price: Less than $500   |  Posted: 7h, 14m ago  |  Ends: 14d, 16h  |   1 Proposal
Looking to get a invention put onto paper with full drawings for construction. egg shape structure which is a bed which can close electronics will be placed inside. will give further infomation on acseptance
Category: Product Design       

b****o_7
 [?]
Sign in to view client's details.
| b****o_7
|    South Africa
Fixed Price: $20 - $60   |  Posted: 9h, 31m ago  |  Ends: 14d, 14h  |   4 Proposals
I have 3 phase 480v electrical into my property, I need to run power out to my site 850 feet away. I'd like to have a 100-200amp service of 1 phase power at the end of the 850ft run. This will be direct burial cable and I would need the EE to look up the Oregon or County specs to make sure the cable selected is suitable. In summary: 1. Size wire according to load and length and 3-phase. 2. Select wire from a discounted source ideally, like ebay 3. Size transformer for 3phase to 1phase 4. Select transformer.
Category: Electrical       

b****s07
 [?]
Sign in to view client's details.
| b****s07
|    United States
Hourly Rate: Not Sure   |  Duration: 4-6 months  |  Posted: 16h, 12m ago  |  Ends: 14d, 7h  |   16 Proposals
Job Description: We are looking for a versatile and experienced engineer and designer of electronics. From prototypes to full production, to work with a small team to help us create the hardware part of our products. This individual must be well organized, technically proficient, independent, creative, and accommodating. Skills required: - Must be able to efficiently produce accurate engineering documentation - Excellence in soldering, mechanical assembly, and rework for design prototypes. - Professional courtesy and communications, especially in dealing with customers. - Experience with video/audio streaming, WebRTC, wireless connection, Bluetooth, motion detection is a plus. - Experience with OpenCV will make you our hero. We are looking for a long-term relationship starting with this project. We are also expecting a first-class hardware developers.
Category: Electrical       

a****tan
 [?]
Sign in to view client's details.
| a****tan
|    United Kingdom
Fixed Price: About $20   |  Posted: 16h, 24m ago  |  Ends: 14d, 7h  |   3 Proposals
This is only scoping and quotation request - Also Send proof of work First, I would like you to assess the information that I have and indicate what you will need in order to perform a feasibility report that could also to be used to attract investors. Second, Also what you can provide in order to get this done. Last how much it will cost for you to do this. The attachment are just background info, I do have coordinates, also irradiation levels, temperature, wind, precipitation etc. Grid information
Category: Other - Engineering &...       
Skills: Manufacturing Design, Electronics       

r****ant
 [?]
Sign in to view client's details.
| r****ant
|    South Africa
Fixed Price: Not Sure   |  Posted: 19h, 50m ago  |  Ends: 14d, 4h  |   12 Proposals
The objective is to design and fabricate one or several circuit board(s) capable of collecting multiple vital signs (ECG, SpO2, Temperature). The design can be a new design or one that is based on an existing reference design if the requirements can be met. If a reference design is used, schematics and demo software/firmware will be provided by the freelancer. The requirements are: - Capable of measuring ECG, pulse oximeter (SpO2), and temperature - Use an embedded 32-bit microprocessor with DSP functionality - Data collection of ECG and SpO2 must be simultaneous or with a low, deterministic latency (<1ms) between ECG/SpO2 samples - Sampling of ECG/SpO2 should occur at a rate higher than 100Hz with a good signal-to-noise ratio - Communication over USB/RS232 to a PC host - Onboard storage for at least 10 seconds of ECG/SpO2 data - Powered by a +5V DC power supply. Preferably a USB port. - A touch or infrared sensor for temperature - Firmware/software program demonstrating the fu...
Category: Electrical       

m****sia
 [?]
Sign in to view client's details.
| m****sia
|    United States
Hourly Rate: Not Sure   |  Duration: 1-3 months  |  Posted: 21h, 51m ago  |  Ends: 14d, 2h  |   27 Proposals
Embedded hardware engineering support needed to assist with design iteration. Work includes schematic, layout and hardware bring-up.
Category: Product Design       

s****obs
 [?]
Sign in to view client's details.
| s****obs
|    United States
Fixed Price: Not Sure   |  Posted: Sep 03, 2015  |  Ends: 13d, 20h  |   22 Proposals
We looking for an expert in magneto to help us customize or style our product page by possibly creating some static block to achieve what we are looking for or come up with a simple solution. An example of what we are trying to achieve is(  [obscured]  /products/speedo-shine) The current theme we are working with is(  [obscured]  /demo/electronics_en) All the necessary by the theme author will be given, plus they are ready to guide you through any challenges. More details will be given before you start. I believe this will give you some understanding of what we are trying to achieve. What is required from you: 1. Be able to give us a fix price 2. Roughly time scale 3.provide us with example of completed project A knowledge of html,front end development, css and magneto.. If you require more information please email us. Many thanks.
Category: Website Design       
Skills: CSS, HTML, PHP, Magento       

M****anu
 [?]
Sign in to view client's details.
| M****anu
|    United Kingdom
Fixed Price: Not Sure   |  Posted: Sep 03, 2015  |  Ends: 13d, 17h  |   3 Proposals
we want to bulid a matlab program that connect CC2540 device and read sensor data from it using Bluetooth then do actions deped on the data that sended by the device
Category: Other - Engineering &...       

a****992
 [?]
Sign in to view client's details.
| a****992 *
|    Jordan
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Sep 03, 2015  |  Ends: 13d, 17h  |   23 Proposals
Hi, I have at a fair a device that is able to talk to centralised Heat&AC systems (like the ones that you find in hotels) and to control remotely temperature etc.. The device is marketed as a power saver due to the fact that uses ultrasonic sensors to detect the presence of people in the room and shuts down heat/AC or reduces it based on the setting chosen. The device is powered and uses power line network and a proprietary protocol to record power saving (the delta between the power reduced since the absence and what it would have used in power if the device was never in place). I would like to produce this device, right now this little device (15cmx10cm) can not be bough, so I would like to create one to propose to hotels etc... Would you be able to help? How would that work? I am a software person and never tried HW/Electronics before, so I am sorry if this might sound a bit foolish, but I can assure the project is serious and I have intention to find the right partner ...
Category: Electrical       

G****Dub
 [?]
Sign in to view client's details.
| G****Dub
|    United Kingdom
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Sep 03, 2015  |  Ends: 5d, 14h  |   12 Proposals
The job involves converting two gerber files (to be provided) into the respective CAD files so that these PCB CAD files that can be edited. The gerber files were given for a reference layout of a electronic component application; unfortunately the existing layouts are not optimised for heat dissipation and the OEM will not supply the CAD files. Gerber File #1: Two layer boards (top and bottom); two traces only Gerber File #2: Four layers boards (top RF signal, RF signal ground, DC signal, DC signal ground); three RF traces; some DC traces. Deliverables of this project: 1. CAD files for the two PCB designs; 2. Check and verification of the gerber vs CAD output Please let me know if you are interested.
Category: CAD       
Skills: Altium Designer, Electronic Design       

J****510
 [?]
Sign in to view client's details.
| J****510
|    Hong Kong SAR, PRC
Fixed Price: $50 - $1,000   |  Posted: Sep 03, 2015  |  Ends: 13d, 13h  |   35 Proposals
Hi, We needed packaging done for electronic products company (eg. battery charger, phone cable etc) We need to know - budget per gift box - Lead time - You past experiences in packaging design Please provide examples of previous work you have done or portfolio in elance. Those freelancers without portfolio will not be considered. WE DON'T WANT to see copy and paste cover letter and outline for the job Thanks
Category: Label & Package Design       

m****ion
 [?]
Sign in to view client's details.
| m****ion
|    Hong Kong SAR, PRC
Fixed Price: Not Sure   |  Posted: Sep 03, 2015  |  Ends: 13d, 11h  |   16 Proposals
Hello, We are looking for an experienced electronic engineer, who could develop a PCB ( schematics, routing and at least basic firmware ) for a camera, that would be using the OV13850 image sensor, save images/video to a micro SD card and/or transfer them via wifi. you are free to select a microprocessor or FPGA that you are most familiar with, as long as it is available, would be able to handle 13.5MP images/video and costs user 25$ or so. other requirements during future communication.
Category: Electrical       

C****mes
 [?]
Sign in to view client's details.
| C****mes
|    Latvia
Fixed Price: $500 - $1,000   |  Posted: Sep 02, 2015  |  Ends: 13d, 3h  |   4 Proposals
Hi, i am looking for some one who can help & design complete hardware to insert text into cctv video camera. Input : from POS system link shows exact final output.   [obscured]  /watch?v=wzkPFapw88A Thanks.
Category: Electrical       

1****in9
 [?]
Sign in to view client's details.
| 1****in9
|    United States
Fixed Price: Not Sure   |  Posted: Sep 02, 2015  |  Ends: 23h, 54m  |   6 Proposals
Cool music lifestyle/consumer electronics brand requires a developer to code up our designs using the Leadpages software platform. You MUST have an active portfolio of web pages developed using the Leadpages platform, and have a grasp of templates and options available in the Leadpages marketplace.
Category: Website Design       
Skills: CSS, HTML, Landing Pages, Leadpages       
Preferred Location: North America

r****com
 [?]
Sign in to view client's details.
| r****com
|    United States
Fixed Price: Not Sure   |  Posted: Sep 02, 2015  |  Ends: 22h, 53m  |   0 Proposals
Hello, I wanted to know if you could help me. I'm designing a new product that needs an internal power generation. My research has steered me towards "disc type axial flux generators /motors". See attached sketch idea. Basically I need a test bed to prove theory I have based on the contrasts that are given. I can't fully describe the entire design but part of it needs to generate electricity and output it to a outlet, which kind of mimics a typical low voltage wall outlet performance you would find at a normal house. The initial device constraints was to have a cylinder can design with a max diameter of 3.5 -5 inches, and have the device be very light weight, and requiring very little force to spin the axial flux inside. I have not specified a height yet this is all a idea in testing phase. What I'm requesting is a design or instructions to create a test bed in my shop and so I can build and tested it, the shape and design are critical. This is a generator, I will ...
Category: Electrical       

m****478
 [?]
Sign in to view client's details.
| m****478 *
|    United States
Fixed Price: $80 - $120   |  Posted: Sep 02, 2015  |  Ends: 12d, 22h  |   30 Proposals
I am looking for someone who can design me 2 logos for two different companies. Please have a look at the details below. 1. Logo 1 - for Electronics and automation company 2. Logo 2 - for Garments 3. Logos can be combination of icon/Symbol or customized text 4. Logos must NOT represent full or any part of animal/human being 5. Vector illustration is needed 6. jpg, png, Ai, PSD format are needed 7. Unlimited revision 8. Unique & Custom Concepts You would need to create some variations (potential) of two logos for review. Your good working experience (creative designing) in logo design will be considered. Please mention how many logo you can propose for this project.
Category: Logos       

s****psk
 [?]
Sign in to view client's details.
| s****psk
|    Canada
Fixed Price: Less than $500   |  Posted: Sep 02, 2015  |  Ends: 12d, 22h  |   26 Proposals
The company name is The Treasure Dock. It will be an online retail store. We want the logo to be creative based around the name of the wed site . Possibly to include toys ,gagits, electronic goods,beauty and health, baby products, and household items. We would like the design to be very simple but very catchy.
Category: Graphic Design       
Skills: Graphic Design       

S****bar
 [?]
Sign in to view client's details.
| S****bar
|    Ireland
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Sep 02, 2015  |  Ends: 27d, 19h  |   3 Proposals
Imperium, Inc. is presently contract work by a Senior Mechanical Engineer with a minimum of 10 - 15 years of mechanical instrumentation and device experience. Experience to include full life cycle precision product development from concept into production, human engineering design, layout and drawing generation, working with vendors, validating prototypes, and providing sustaining assistance with production released products. 7 years Solidworks experience required. Handheld rugged instrumentation development experience preferred. Candidates must be in the Washington DC or Baltimore area. Candidate shall be capable of collecting and maintaining requirements in electronic format, developing concepts, design layouts, and calculations to support design concepts. Must have good communication skills, require little or no supervision, and possess exceptional creative skills. Optimal additional areas of experience include basic motion control and mechanism design, optical design and indu...
Category: Mechanical       
Skills: SolidWorks, 3D Design, Packaging Design, thermal       
Preferred Location: United States

b****ser
 [?]
Sign in to view client's details.
| b****ser
|    United States
Fixed Price: $20 - $25   |  Posted: Sep 02, 2015  |  Ends: 12d, 18h  |   24 Proposals
Im looking for someone to make me a logo for a new brand coming out electronics must be a good logo to attract new consumers If you cant please dont send a price just some one you done it
Category: Logos       

j****688
 [?]
Sign in to view client's details.
| j****688
|    United Kingdom
Fixed Price: Not Sure   |  Posted: Sep 01, 2015  |  Ends: 4h, 1m  |   39 Proposals
I have a PCB that needs a redesign + improvement. It will need to be coded from scratch but it's a simple device. Looking for someone who can do it within 2 weeks as it's a priority job.
Category: Electrical       

t****gak
 [?]
Sign in to view client's details.
| t****gak
|    Australia
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job