Save this Search
     
Sort by:
  • Posted Date
Engineering & Manufacturing
Hourly Rate: Less than $10 / hr   |  Duration: Not Sure  |  Posted: 2h, 45m ago  |  Ends: 14d, 21h  |   0 Proposals
Information Operations is a category of direct and indirect support operations for the United States Military. By definition in Joint Publication 3-13, "IO are described as the integrated employment of electronic warfare (EW), computer network operations (CNO), psychological operations (PSYOP), military deception (MILDEC), and operations security (OPSEC), in concert with specified supporting and related capabilities, to influence, disrupt, corrupt or usurp adversarial human and automated decision making while protecting our own."[1] Information Operations (IO) are actions taken to affect adversary information and information systems while defending one's own information and information systems. or rumors deliberately spread widely to influence opinions.[1]
Category: Contract Manufacturing       
Skills: Processing       

o****ssa
 [?]
Sign in to view client's details.
| o****ssa
|    Algeria
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 19h, 33m ago  |  Ends: 14d, 4h  |   10 Proposals
Hi, I am in the process of working on a device which utilizes an ESP8266 wifi module, specifically the ESP-12 variation. The module will be controlling a bank of 4 to 6 RGB leds. I have nearly everything working, but there are some issues and I am a noob when it comes to electronics. I am looking for a go-to person who is fluent in electronics, integrated circuits and micro-controllers such as Arduino and the ESP8266 module who can assist me when I have questions and provide consulting/guidance guidance when it comes to helping me plan resistors, transistors, wiring layout, etc. over the course of the project. This is a small project, and I will have just occasional questions and need occasional assistance. I am looking for someone who can charge by the hour to provide consulting on an as needed basis.
Category: Electrical       

l****abs
 [?]
Sign in to view client's details.
| l****abs
|    United States
Fixed Price: $20 - $60   |  Posted: 20h, 15m ago  |  Ends: 14d, 3h  |   1 Proposal
Hi, I'm looking for someone who can make a step-by-step, super simple explained tutorial on how I can build a drone based on Arduino. I need to know - All the parts that I need, including ebay links to order them (Find cheapest parts) - Step-by-step tutorial in simple language, on how I can assemble. Pictures/videos would be best if possible. - I need to have the code I need to run on Arduino for it to make it work - And overall I'm looking to build a small Quadcopter without camera or anything. This job is for those who have already built quadcopters/drones and can teach me how to build an arduino based on that is super simple to assemble and has cheap parts. I'm looking to spend maximum $100 on parts. I don't want to to google a tutorial and send me a link, but make it super clear on what to do so that with the instructions even a child should be able to follow the instructions. Type of drones I like (Simple and cheap ones:   [obscured]  /id/the-pencil-drone/ ) Som...
Category: Electrical       

J****rim
 [?]
Sign in to view client's details.
| J****rim
|    Netherlands
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 21h, 29m ago  |  Ends: 14d, 2h  |   1 Proposal
I would like to create the next biggest WII game or computerized game. The game would have Motion Path behavior where there will be rotating objects in sync with one another. There will be custom speed option for motion path as well. It will be used for exercise, and also the objects will move to the beat of music. So it can be programmed to music. It will be a cool fun game for kids of all ages! I am not sure all who would be involved. I would think an engineer and an IT person. Help!
Category: Product Design       

w****tee
 [?]
Sign in to view client's details.
| w****tee *
|    United States
Fixed Price: Less than $500   |  Posted: 23h, 16m ago  |  Ends: 14d, 0h  |   19 Proposals
This job will require design for a wearable PCB enclosure with (preferably) only two fixed pieces with a clip. It is an extremely simple design. Dimensions: *Approximately* 1.5 inches L X .7 in W X .4 in H Product enclosure design will be for eventual injection molding so all industrial design considerations should be taken into consideration. Must fit existing PCB design perfectly, so close coordination and excellent English communication is important. Full specifications and design will be provided if hired (NDA requested). Preferably, the final version will be submitted in a common 3D print file format (.stl file format preferred). When posting proposals please include the software to be used and the file format you expect to deliver the final design in.
Category: CAD       
Preferred Location: North America

B****uzr
 [?]
Sign in to view client's details.
| B****uzr
|    United States
Fixed Price: Not Sure   |  Posted: Aug 01, 2015  |  Ends: 13d, 23h  |   6 Proposals
Need microcontroller instructions to drive the motor, so that it pushes the box. Need advice on - motor-microcontroller combination, that is best suited for this kind of application. This small requirement is part of a bigger system. Attached are detail description of the project.
Category: Other - Engineering &...       

v****015
 [?]
Sign in to view client's details.
| v****015
|    United States
Fixed Price: Less than $500   |  Posted: Aug 01, 2015  |  Ends: 13d, 12h  |   7 Proposals
Hello, I have purchased an LED controler called a WIFI 300 controler. The device comes with a number of pre-programmed sequences to control 5 meters of LED strip that you connect to the controler. I would like to hire a person to reprogram the WIFI 300 controler so i can add some new sequences and remove some existing sequences. Please let me know. Thanks, Harry
Category: Electrical       
Skills: Electrical Engineering, Electronics       

h****tun
 [?]
Sign in to view client's details.
| h****tun
|    United Kingdom
Fixed Price: Not Sure   |  Posted: Jul 31, 2015  |  Ends: 12d, 22h  |   8 Proposals
Looking to design a device which can be the size of a Samsung Note 2/3 (or smaller) and thickness doesn't really matter. The purpose of this device is to perform the following functions: - Send GPS signal of device's location - Capable of reading weight 5lbs min (Can be a mat (cloth) or something similar so when object is placed it'll read that weight when it goes past 5lbs. When weight goes above 5lbs it'll have indicator light on the actual device to show the weight of 5lbs or more is present. - Make an audible alarm (just like you'd hear on your smart phone) - Capable of communicating with the Mobile APP (Bluetooth) - Temperature reading capability - Device should have LED indicators - Device should be able to run on rechargeable lithium-ion battery and should be able to deliver performance signal for 10 hours - GPS is NOT activated after a certain action is not performed within the specified time (Save on battery life) The purpose of this device (size of smartphone) it'll ...
Category: Product Design       

W****2Go
 [?]
Sign in to view client's details.
| W****2Go
|    United States
Fixed Price: Not Sure   |  Posted: Jul 31, 2015  |  Ends: 27d, 13h  |   5 Proposals
This is a simple LCD laser projector that is similar to those seen on weather clocks (see image). I would like to have a stand-alone that can communicate with my iPhone app and other smartphone (android). Features and functionality include: Rotate to shine on any ceiling or wall operate on 2 AAA that will last at least 6 months Will turn off display when disconnected from smartphone Turn on LCD display when connected to Bluetooth device temperature of where device is (optional) Projection feature brightens as room light levels increase Will display Time Temperature and weather - received from smartphone
Category: Electrical       

f****412
 [?]
Sign in to view client's details.
| f****412
|    United States
Fixed Price: Not Sure   |  Posted: Jul 31, 2015  |  Ends: 12d, 11h  |   5 Proposals
Hi, I need a high voltage circuit designed. I need to be able to transform a low voltage (ideally between 12-24V) to a very high voltage of 45,000V, so there is a potential difference between two electrodes of 45,000V (i can then vary the electrode size, distance to create the desired electric field strength etc). The output voltage needs to be variable to a minimum of the low input voltage and to a maximum of 45,000V.
Category: Electrical       

b****691
 [?]
Sign in to view client's details.
| b****691
|    United Kingdom
Fixed Price: Not Sure   |  Posted: Jul 31, 2015  |  Ends: 12d, 11h  |   2 Proposals
(In this project,you will focus attention on sufferers of plantar peripheral neuropathy (numbness of the feet)caused by diabetes .In order to enable automatic testing of plantar neuropathy our in house robotic test bed must avoid probing lesions(areas of broken skin).features will be extracted from images of patient's feet and used to detect lesions from normal skin.This project will be based around determining the best features to extract for optimal classification and will be carried out using matlab. you may try clustering.) I NEED BELOW ONE FIRST( as soon as possible atleat before 20th july ) hint I am attaching my project information here (i need abstract first and matlab code ) matlab code for non foot ,edge of the foot with non foot area,foot where the pressure is more(white colour in picture) and the foot with pressure is less. if u need more information i will provide you.Thank you
Category: Other - Engineering &...       
Skills: Electronics, MATLAB, clustering, diabetics       

s****nbu
 [?]
Sign in to view client's details.
| s****nbu
|    United Kingdom
Fixed Price: Less than $500   |  Posted: Jul 31, 2015  |  Ends: 4d, 8h  |   4 Proposals
hello Guys, i have a small electric circuit working with generator principle that needs to be improved. a PCB with coil on it passes by a magnet. the induced Voltage is then kept in Ecaps and is slowly released to drive 2 standard LEDs. please see attachment. the whole PCB is rather simple. only 9 components so far. in case there is small money needed for component etc, we will pay extra or ship from here...
Category: Electrical       

S****ial
 [?]
Sign in to view client's details.
| S****ial
|    Germany
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 31, 2015  |  Ends: 4d, 7h  |   1 Proposal
I have a wireless flash trigger transmitter and a receiver. They work with a Amiccom A7105 chip. I want to develop something similar with an Atmel microcontroller and this Amiccom chip. I'm a electronic engineer and I need support for this project. I DO NOT need someone who writes all the code or design all the schematic, I NEED someone who can explain me some points : 1) I need to know how my trigger transmitter and receiver works(probably we need read the signals transmitted and received) (1-2 hours) 2) If they work with RF I need a quickly introduction on RF and protocol as ZigBee (1hours) 3) I need support to develop the library(SPI) to comunicate between microcontroller and A7105. (around 10 hours or less) I prefer working face to face so I prefer someone from UK / Italy or Europe.
Category: Electrical       
Skills: Electrical Engineering, Electronics       
Preferred Location: Western Europe, Eastern Europe

a****e87
 [?]
Sign in to view client's details.
| a****e87
|    United Kingdom
Fixed Price: Not Sure   |  Posted: Jul 31, 2015  |  Ends: 12d, 4h  |   5 Proposals
Hi I want to make battery powered individually addressable LED strip lighting. I want to control this strip lighting with a cell phone app. Do you think this is something you can do?
Category: Product Design       

b****605
 [?]
Sign in to view client's details.
| b****605
|    United States
Fixed Price: Not Sure   |  Posted: Jul 31, 2015  |  Ends: 12d, 4h  |   12 Proposals
Hi I want to make battery powered individually addressable LED strip lighting. I want to control this strip lighting with a cell phone app. Do you think this is something you can do?
Category: Product Design       

b****605
 [?]
Sign in to view client's details.
| b****605
|    United States
Fixed Price: Less than $500   |  Posted: Jul 30, 2015  |  Ends: 12d, 0h  |   4 Proposals
I need an Arduino Zero to interface with Arduino TCD1304 using USB native protocol not Serial Over USB ( Too Slow)
Category: Other - Engineering &...       

M****626
 [?]
Sign in to view client's details.
| M****626
|    United States
Hourly Rate: $15 - $20 / hr   |  Duration: 1-2 weeks  |  Posted: Jul 30, 2015  |  Ends: 11d, 19h  |   5 Proposals
Need engineer/programmer to develop wearable wireless proximity sensor (such as bracelet) with capability to send alerts to leading smart phone technologies when different conditions are met. Must meet US electrical requirements. Need working prototype developed on fixed budget. Open to discussing an equity stake.
Category: Electrical       
Skills: Electrical Engineering, Electronics       
Preferred Location: North America

d****mba
 [?]
Sign in to view client's details.
| d****mba
|    United States
Fixed Price: Not Sure   |  Posted: Jul 30, 2015  |  Ends: 11d, 16h  |   22 Proposals
We need you to convert the attached Eagle Files to Altium. The PCB is a simple open source board created by SparkFun. In addition we need you to: 1: Use our own custom silkscreen art and place it into the final file. 2: Add .5" to each end of the board and add four through-holes in these areas, so we can physically mount the board with fasteners. 3: Change the solder mask to black. 4: Radius the corners 1-2mm. 5: Deliver to us a full Altium package, including BOM, 3D renders (top, bottom & perspective views), and output a SW2014 or equivalent CAD file so we can import it into our product's master CAD file. Do not alter the actual electrical engineering in any way. This is a simple file conversion job. REFERENCE VIDEO FOR CONVERTING FROM EAGLE TO ALTIUM:   [obscured]  /watch?v=mKk__RNxuwc MORE INFORMATION ABOUT OPEN SOURCE BOARD:   [obscured]  /products/13019   [obscured]  /tutorials/bc118-ble-mate-2-hookup-guide
Category: Electrical       

h****agi
 [?]
Sign in to view client's details.
| h****agi
|    United States
Fixed Price: Less than $500   |  Posted: Jul 30, 2015  |  Ends: 11d, 16h  |   2 Proposals
Hello, I need a generic obd interface (hardware + plus software) , which can gather all available information provided by the machine and provide it as an xml. The hardware can be configured to monitor certain parameters like - car speed, car pollution efficiency (via some mechanism), braking or zig zag driving. and store this value and when required push it via obd cable (or wifi) based on configuration.
Category: Product Design       
Skills: Electronics, Embedded System, OBD Interface       

S****Vai
 [?]
Sign in to view client's details.
| S****Vai
|    India
Fixed Price: Not Sure   |  Posted: Jul 30, 2015  |  Ends: 26d, 15h  |   15 Proposals
Temperature control utilizing a 1000 ohm RTD input designed to output to a 3-32vdc solid state relay. The temperature control features power saving functions such as standby (reduced heat) and sleep (self power off) modes, a remote encoder / pot w/ momentary for user input, LED display and other calibration parameters. There should be an output to power (activate) other or additional modules and sleep mode may be inhibited by an external feedback from such other modules. Of particular interest is temperature calibration and related duty cycle settings as described later.
Category: Electrical       

p****ian
 [?]
Sign in to view client's details.
| p****ian
|    United States
Fixed Price: $500 - $1,000   |  Posted: Jul 30, 2015  |  Ends: 11d, 15h  |   3 Proposals
Hello, I need help in designing a prototype for water flow meter. (which can be then updated be measure gas too). Following functionalities are required a) Minimum battery consumption b) Tell volume flow in literes in last x minutes , and should store last n readings. c) On request or or automatic convey the information via ipnetwork to a machine.
Category: Product Design       

S****Vai
 [?]
Sign in to view client's details.
| S****Vai
|    India
Fixed Price: Less than $500   |  Posted: Jul 30, 2015  |  Ends: 11d, 8h  |   2 Proposals
I am looking to create a frisbee for a new game i have invented. The frisbee needs to be approx 175g including the electronic timing device. What i hope to achieve is a frisbee that when thrown is just a normal frisbee, but when caught it activates a variable timer 2/3/4/5 sec. The timer then activates LED's to flash if the frisby is not spinning before the time has lapsed. The electronics need to be moulded within the plastic with access to the battery and the switch for on/off and varying the timer needs to be accessible. Finally the unit needs to be waterproof, sand proof etc. As this will predominantly be a beach game.
Category: Product Design       

a****808
 [?]
Sign in to view client's details.
| a****808
|    Australia
Hourly Rate: $20 - $30 / hr   |  Duration: Not Sure  |  Posted: Jul 30, 2015  |  Ends: 11d, 5h  |   6 Proposals
Looking help for project on systems engineering where taking one system as model and identifying the subsystems, functions, concept exploration, concept definition, performance requirements etc
Category: Other - Engineering &...       
Preferred Location: North America, Western Europe, Eastern Europe, India/Southern Asia, Eastern Asia, Australia/Oceania

r****143
 [?]
Sign in to view client's details.
| r****143
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job