Save this Search
     
Sort by:
  • Posted Date
Hourly
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 6h, 19m ago  |  Ends: 14d, 17h  |   1 Proposal
Are you a creative engineer? Can you take an idea and turn it into reality? Maybe build something fun? Am looking for someone who has a background in computer hardware engineering, someone whom can take an idea and figure out if an idea can work. You would also need skills (or know someone who does) in APP writing for iPhones and or Android based mobile phones. First part is to figure out if the project is possible to build. Second part is to build it. Think this is you? It's for a toy.
Category: Product Design       
Preferred Location: United States

L****_76
 [?]
Sign in to view client's details.
| L****_76
|    United Arab Emirates
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 27, 2015  |  Ends: 13d, 3h  |   15 Proposals
I would like to prototype a board that will: - Read a temperature from a sensor - Based on the temperature, it will have a pre-set requiremet to reach x degrees in x minutes (for example, I need to reach 50Degrees in 15 minutes) - Based on the above logic, it will have to control a gas valve to open or close it. I need a consultant help in order to: - Program it using arduino (desirable to log some info to raspberry PI) - Help on the list of components to be used (which temperature sensor to use, which gas valve to use, ...)
Category: Electrical       
Skills: Electrical Engineering, Electronics, Arduino       

a****elo
 [?]
Sign in to view client's details.
| a****elo
|    Brazil
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 27, 2015  |  Ends: 13d, 3h  |   1 Proposal
I am looking for a Service Engineer to do troubleshooting, small modifications, service on machine we have installed and commisionned with clients of us in the USA, Michigan - Chicago area. Required knowledge, Siemens TIA portal, drive technologie.
Category: Electrical       

T****edt
 [?]
Sign in to view client's details.
| T****edt
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 27, 2015  |  Ends: 12d, 22h  |   5 Proposals
I have a project where i need to flash a NAND chip attached to a Marvell PXA320 processor. I need to be able to disable the I/O section of the 320 so it does not interfere with in circuit programming of the NAND chip. I need to know what to do and how to do it.
Category: Electrical       

r****009
 [?]
Sign in to view client's details.
| r****009
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 27, 2015  |  Ends: 27d, 20h  |   1 Proposal
Need Collaboration Partners for electronics business with capital investment. Please send across your profile so that we could discuss further. Thanking you.
Category: Other - Engineering &...       
Preferred Location: North America, Western Europe, Eastern Europe, Eastern Asia, Middle East & Central Asia, Central & South America, Africa, Australia/Oceania

s****dia
 [?]
Sign in to view client's details.
| s****dia
|    India
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 27, 2015  |  Ends: 12d, 18h  |   1 Proposal
We are a company specializing manufacturing and distribution of microphones, wireless microphone systems and other audio equipment. We look for cooperation with native sound engineers to give us professional product reviews. we are also open to other cooperation.
Category: Other - Engineering &...       

x****guo
 [?]
Sign in to view client's details.
| x****guo
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 26, 2015  |  Ends: 27d, 12h  |   0 Proposals
MDA Information Systems LLC has an immediate opening for a Mid-level Integration Engineer to join our team. The position provides an opportunity to work on projects that support some of our nation's fundamental defense services. MDA employees work closely with esteemed customers to develop solutions that allow them to carry out high-stakes national security missions. The selected candidate will work with collaborative teams on various technical projects associated with our core mission. The Mid-level Integration Engineer will enhance their skill set by working among a talented and technically accomplished group of colleagues. Engineers enjoy a flexible work environment, where contributions are recognized and rewarded. Position is available in either the Washington DC Metro Area or in Ypsilanti, MI. Michigan-based employees will need to be able to travel between 10-20% of their time. The Company: MDA Information Systems LLC is a major supplier of weather information and geospa...
Category: Other - Engineering &...       
Preferred Location: United States

M****sOC
 [?]
Sign in to view client's details.
| M****sOC
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 26, 2015  |  Ends: 27d, 12h  |   2 Proposals
MDA Information Systems LLC is looking for a Junior Software Engineer in our Ypsilanti, MI location. This position involves working with a massive C++ codebase, and you will need to be willing to dive right in. The Company MDA Information Systems LLC is a major supplier of weather information and geospatial intelligence. The firm serves a diverse client base including commercial and governmental organizations in agriculture, energy, defense, and civilian government. MDA Information Systems LLC offers an excellent comprehensive benefits package including medical, dental, life, and short/long-term disability insurance, vacation and sick leave, 401(k) retirement plan, Flexible Spending Account and tuition assistance. MDA Information Systems LLC is an Equal Opportunity Employer. To be qualified you must be a US Citizen and be eligible to receive an active TS/SCI Clearance. Core Responsibilities * This position involves working with a massive C++ codebase, and you need to be will...
Category: Other - Engineering &...       
Preferred Location: United States

M****sOC
 [?]
Sign in to view client's details.
| M****sOC *
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 26, 2015  |  Ends: 27d, 12h  |   0 Proposals
MDA Information Systems LLC is looking for a Senior Eng 1 - Software in our Ypsilanti, MI location. This position has a massive C++ codebase, and the right candidate will need to be willing to dive right in, This is primarily heavy duty image processing code that crunches on big images. The Company: MDA Information Systems LLC is a major supplier of weather information and geospatial intelligence. The firm serves a diverse client base including commercial and governmental organizations in agriculture, energy, defense, and civilian government. MDA is an industry leader in earth observation remote sensing technology and image processing. We build satellite ground systems that enable users to acquire and process imagery form the most sophisticated Earth-observing satellites in the world: much of the satellite imagery that you see on Google Maps was generated by our software! To be qualified you must be a US Citizen and have the ability to obtain a TS/SCI Clearance within 18 Mon...
Category: Other - Engineering &...       
Preferred Location: United States

M****sOC
 [?]
Sign in to view client's details.
| M****sOC
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 26, 2015  |  Ends: 27d, 12h  |   0 Proposals
MDA Information Systems LLC is looking for a Software Engineer/Web Developer in our Ypsilanti, MI location. This position has a massive C++ codebase, and the right candidate must be willing to dive right in. This is primarily heavy duty image processing code that crunches on big images. The Company: MDA Information Systems LLC is a major supplier of weather information and geospatial intelligence. The firm serves a diverse client base including commercial and governmental organizations in agriculture, energy, defense, and civilian government. MDA is an industry leader in earth observation remote sensing technology and image processing. We build satellite ground systems that enable users to acquire and process imagery from the most sophisticated Earth-observing satellites in the world: much of the satellite imagery that you see on Google Maps was generated by our software! To be qualified you must be a US Citizen and be able to obtain an active TS/SCI Clearance * Most...
Category: Other - Engineering &...       
Preferred Location: United States

M****sOC
 [?]
Sign in to view client's details.
| M****sOC *
|    United States
Hourly Rate: $40 - $50 / hr   |  Duration: 1-2 weeks  |  Posted: Mar 26, 2015  |  Ends: 12d, 11h  |   5 Proposals
Need an "antenna" design for a gsm base station using an Ettus Research N210 USRP. A single antenna configuration should have a coverage area with a radius of 450 ft. Multiple antennas/N210s will be used on a site covering approximately 1/4 sq. mile(s). N210 has 31dB gain. Specs for the N210 can be found at ettus.com.
Category: Electrical       
Skills: Electrical Engineering, Electronics       

y****ers
 [?]
Sign in to view client's details.
| y****ers
|    United States
Hourly Rate: $15 - $20 / hr   |  Duration: 1-2 weeks  |  Posted: Mar 26, 2015  |  Ends: 4d, 4h  |   0 Proposals
Hi Elancers, Ik zoek z.s.m. een klusser die voor mij een aanhanger kan vernieuwen. De aanhanger is gemaakt van hout. Dit hout is toe aan vervanging en ik zoek iemand die dit voor mij zou kunnen doen. Er gaat maximaal 10 uurtjes in zitten. Specificaties aanhanger: Lengte: 365 CM Breedte: 194.5 CM Hoogte: 175 CM Nieuw materiaal: Betonplex of watervast berken multiplex
Category: Other - Engineering &...       
Preferred Location: Netherlands

a****sic
 [?]
Sign in to view client's details.
| a****sic
Hourly Rate: $10 - $15 / hr   |  Duration: 1-2 weeks  |  Posted: Mar 26, 2015  |  Ends: 12d, 2h  |   3 Proposals
I need help for design a Tunable Band Stop Filter (By using ADS software) I need explanation of the steps of that design and how to complete it by ADS program. If someone have the knowledge about ADS software. Happy bidding. Thanks Robin.
Category: Electrical       

h****bin
 [?]
Sign in to view client's details.
| h****bin
|    Italy
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 26, 2015  |  Ends: 11d, 22h  |   2 Proposals
I need some consulting on how mobile wireless hotspot devices are built and the cost of their components. I have some examples that I can show you and then ask questions re: the feasibility of building one. Then potentially design and manufacture one.
Category: Other - Engineering &...       
Skills: Manufacturing Design, Electronics       

b****enb
 [?]
Sign in to view client's details.
| b****enb
|    Canada
Hourly Rate: More than $50 / hr   |  Duration: Not Sure  |  Posted: Mar 25, 2015  |  Ends: 11d, 10h  |   7 Proposals
Hi Looking to hire an Engineer to help create a product for me. Need them to have knowledge about electricity and knowledge in fire. Willing to pay top Dollar please be in the US and needs to sign a NDA
Category: Chemical Engineering       

m****ado
 [?]
Sign in to view client's details.
| m****ado
|    United States
Hourly Rate: More than $50 / hr   |  Duration: Not Sure  |  Posted: Mar 25, 2015  |  Ends: 11d, 10h  |   3 Proposals
Hi Looking to hire an Engineer to help create a product for me. Need them to have knowledge about electricity and knowledge in fire. Willing to pay top Dollar please be in the US and needs to sign a NDA
Category: Electrical       

m****ado
 [?]
Sign in to view client's details.
| m****ado
|    United States
Hourly Rate: $20 - $80 / hr   |  Duration: Not Sure  |  Posted: Mar 24, 2015  |  Ends: 10d, 10h  |   8 Proposals
I am looking for a specialist, who is deep inside how are boosters and amplifiers for smartphones are working. I need answers, how each smartphone can increase the power and sound quality with an external device. There are different products available and I want to develop a new one. The focus is on a battery like from the wearables to become external power and will load it wireless as beats doing it. I need an offer for developing a PCB, produce and test with such battery and make it as small and as light as possible. Itīs especially for boosting Ear sets, not for headphones (later we will develop also) We have some more ideas to develop in the same direction.
Category: Electrical       

m****ion
 [?]
Sign in to view client's details.
| m****ion
|    Bulgaria
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 24, 2015  |  Ends: 10d, 2h  |   7 Proposals
Hi, I need a circuit board designed and code written for a device that will transmit a weight over GSM to remote servers. The signal coming in will be that of a load cell. I would like the inputs from the load cells to be intrinsically isolated if possible as well. Once the signal is received by the Micro controller, it needs to be sent by GSM. That signal will be sent to a remote server and a web application will use the data to provide customer specific information. The unit will be able to take from 1-10 inputs from the load cells for now, depending on the application. Some Digital outputs from the controller will also be transmitted for alarms. The unit will need to be battery powered, with battery level indication also transmitted. I was thinking that readings from the load cell could be stored up and every couple of minutes sent to server to save on battery life. The project is in South Africa. So, I will need controller, modem etc. to be freely available here. I would prefer...
Category: Electrical       

k****ter
 [?]
Sign in to view client's details.
| k****ter
|    South Africa
Hourly Rate: $20 - $30 / hr   |  Duration: 1-3 months  |  Posted: Mar 24, 2015  |  Ends: 10d, 0h  |   19 Proposals
we have a prototype based on arduino for a sensor and wifi communications. Likely cc3000 chip or equivalent. We want to first put this on one pcb board and get it packaged into a device. Can use arduino or whatever other recommended microcontroller.
Category: Electrical       
Skills: Electrical Engineering, Electronics       

c****n99
 [?]
Sign in to view client's details.
| c****n99
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 24, 2015  |  Ends: 1d, 17h  |   12 Proposals
We need someone to work with us on a small work regarding a specific micro controller board. Someone who can deliver fast. Freescale.
Category: Electrical       

s****kss
 [?]
Sign in to view client's details.
| s****kss
|    India
Hourly Rate: $10 - $15 / hr   |  Duration: 1-2 weeks  |  Posted: Mar 23, 2015  |  Ends: 9d, 15h  |   5 Proposals
Small circuit board 32x25mm (4) 2.4 screw holes (specific location requirement) Micro USB 1 Button Long Hold Tap 1 Tap 2 Long Hold Power 1 Fan (2.5v) ON OFF 1 Peltier Module 1.0v 1.5v 1.9v Off L.E.D. Lights 1 Light 2 Lights 3 Lights Off I have a sketch on where i would like the button and l.e.d. lights to be located. Very simple. Please email me any questions.
Category: Electrical       

S****1ds
 [?]
Sign in to view client's details.
| S****1ds
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 23, 2015  |  Ends: 9d, 15h  |   8 Proposals
We are looking for professional engineers with practical experience within Hazardous Areas to join our team on an Ad-Hoc basis. We are a social enterprise business that believes that Safety should be first in all work places and that it is the RIGHT of all humans to work & live in a safe work environment. The individuals that we are looking for must share a desire for social justice and something burning within them to change the way people think about safety. We are looking for experienced candidates that have a proven track record of delivering work within acceptable time frames and that can provide an exceptionally high level of work
Category: Electrical       
Skills: Electrical Engineering, Electronics       

T****ero
 [?]
Sign in to view client's details.
| T****ero
|    Australia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 23, 2015  |  Ends: 9d, 14h  |   2 Proposals
I have a Factory Talk Historian project that I may need some help on. We are a systems integrator and we have done a ton of PLC type work but have not done Historian. I'm fairly new to Historian and i'm not exactly sure even how to see if this is something you are interested in. It is a really small and straight forward Historian Project with only about 30 Tags or so. it is basically a Batch Mixing process and they want to record some values every 5 minutes during a batch and then they want to store a bunch of values at the end of the batch. Thanks, Jay King
Category: Electrical       

J****123
 [?]
Sign in to view client's details.
| J****123
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 23, 2015  |  Ends: 9d, 11h  |   19 Proposals
Requirements: 1. Thermal control of 2 resistance heaters with thermocouple feedback. May include Fan control also for cooling. 2. Toggle 8 LEDs on/off 3. Convert 4 analog signals to digital value. Will require some on board signal conditioning. Signal source is a photo diode or similar type device. Signal will need to be free of noise. 4. Battery powered - will need a battery charging circuit 5. Processor - TBD 6. USB access 7. Bluetooth capable - will need to control the hardware via a mobile App. App development will be done separately. Primarily looking for hardware designer at this point. If the same individual can do the firmware, then we may also engage them on the firmware side. Otherwise, we have our own guy we often use.
Category: Electrical       

b****ght
 [?]
Sign in to view client's details.
| b****ght *
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job