Save this Search
     
Sort by:
  • Posted Date
Engineering & Manufacturing
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 20, 2015  |  Ends: 10d, 15h  |   14 Proposals
Need prototype of small electronic consumer product. Further description discussed when meeting. NDA
Category: Product Design       
Preferred Location: United States

c****nic
 [?]
Sign in to view client's details.
| c****nic
|    United States
Hourly Rate: Not Sure   |  Duration: 1-3 months  |  Posted: Apr 20, 2015  |  Ends: 10d, 13h  |   17 Proposals
Without seeing the design I have in mind for this project it will be difficult to explain to you exactly what we want to produce. Essentially we're in need of a square panel (apx. 30"x30") made out of a .5 inch white cast acrylic that is translucent enough to trigger LED sensors through it. These sensors will need to be able to control volume, music controls (play, pause, next, etc.), an LED light strip, and a relay switch that powers two 110v 10watt lights. The panels audio components will need to include a bluetooth receiver for controlling and inputting mobile devices. It also needs an option of a 3.5mm stereo input that will bypass the bluetooth's audio for direct connection. This will all need to be output to a stereo jack (3.5mm or RCA). For lighting, the panel will need to include three functions for controlling a RGBW LED light strip. These need to include, set color, auto dimming, & sound activated responses. Also we need a relay sensor/switch to power on &am...
Category: Electrical       

t****use
 [?]
Sign in to view client's details.
| t****use
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 20, 2015  |  Ends: 85d, 13h  |   0 Proposals
GCL Environmental Ltd. (GCL) is a privately owned environmental consulting firm primarily focused on the upstream oil and gas sector. We provide services in environmental site assessment (ESA), remediation, reclamation, spill response, liability assessment, environmental auditing and facility decommissioning. GCL has and continues to provide services across Western Canada. The successful candidate will possess the following skills and attributes: Bachelor of Science degree or Masters of Science Degree in Environmental Science, Environmental Engineering, Geology or other relevant Environmental Program along with a minimum of 10 years of experience. In addition, candidate should have applicable professional designation. Candidates who are not designated, but who are eligible, will also be considered. ? Experience in soil and groundwater contaminated sites monitoring and remediation programs. ? Experience with Tier 2 guidelines provided by the Subsoil Tool (SST) and application. Th...
Category: Other - Engineering &...       
Preferred Location: Canada

J****009
 [?]
Sign in to view client's details.
| J****009
|    Canada
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 20, 2015  |  Ends: 85d, 12h  |   0 Proposals
Assistance for projects using the IBM Bluemix platform. Must be familiar with the platform and know multiple programming languages.
Category: Other - Engineering &...       

b****dev
 [?]
Sign in to view client's details.
| b****dev
|    United States
Fixed Price: Not Sure   |  Posted: Apr 20, 2015  |  Ends: 25d, 11h  |   8 Proposals
Hi i have some circuit level simulation design that are to be executed in cadence. If anyone available please reply......
Category: Electrical       

r****adi
 [?]
Sign in to view client's details.
| r****adi
|    Canada
Fixed Price: $1,000 - $5,000   |  Posted: Apr 20, 2015  |  Ends: 10d, 7h  |   6 Proposals
I require a bespoke KVM device, with the following features: 1) In-line functionality - The device must sit between a computer and its KVM peripherals, so that a local user can make full use of the system, as well as a remote user. 2) Video support - The device should support D-SUB VGA, DVI-D and HDMI connectors. 3) Keyboard/Mouse support - USB support only required. 4) Storage - The remote user must be able to provide files to the computer. This should be implemented by uploading files to the device, which then presents a USB storage device to the computer. This should include the presentation of an ISO image as a USB CD/DVD drive. 5) Connectivity - The device should have at least an Ethernet connection, but ideally include a 3G/GPRS module for use in the event of wired network outage. The primary non-functional requirement is minimum cost per unit for production. I would need to see at least a high level design of the hardware and software before I could accept a proposal. Su...
Category: Other - Engineering &...       

n****ole
 [?]
Sign in to view client's details.
| n****ole
|    United Kingdom
Hourly Rate: Not Sure   |  Duration: 1-2 weeks  |  Posted: Apr 20, 2015  |  Ends: 10d, 3h  |   13 Proposals
I have an idea for a new type of light switch. I need someone to build me a prototype. If you are interested in discussing it more please let me know and I will be happy to discuss it in more detail. I am sure this is a relatively simple project but someone to build this in a quick time frame.
Category: Product Design       
Skills: Manufacturing Design, Electronics, plastics       

j****ssi
 [?]
Sign in to view client's details.
| j****ssi
|    Vietnam
Fixed Price: Not Sure   |  Posted: Apr 20, 2015  |  Ends: 10d, 0h  |   5 Proposals
Your task is to design a cup holder/Spice rack transporter (choose only one application). For the cup holder the intended use is to attach the cup holder system to a desk. There should be a part in cup holder system to secure a coffee mug in it. The intended use of the spice rack is to mount it on the wall or the ceiling close to cooking area. In both cases, the spice rack holder and the cup holder could be placed and locked above the working area. To achieve this objective, four parts/group of parts (subassembly) should be designed. They are: Attachment group, locking group, transport group, and cup/spice rack holder group. Each should address the following functional requirements. The function of the attachment group is to secure the transport group to a desk, wall, or ceiling. The function of the locking group is to lock the transport group so that it is not falling under its own weight. The function of the transport group is to move the cup holder/spice rack in the space anywhere a...
Category: Other - Engineering &...       

a****dar
 [?]
Sign in to view client's details.
| a****dar
|    United States
Fixed Price: $50 - $75   |  Posted: Apr 20, 2015  |  Ends: 10d, 0h  |   12 Proposals
simple power analysis simulation < $75. The normal/basic power analysis simulation. to be delivered as soon as possible. If done this task perfectly, will continue to work in future too.
Category: Electrical       

m****ota
 [?]
Sign in to view client's details.
| m****ota
|    United States
Fixed Price: Not Sure   |  Posted: Apr 19, 2015  |  Ends: 84d, 13h  |   11 Proposals
l am desinging a locker back that uses electrical magnets for latches to close its doors. I want to connect these electrical magnets to be controlled with a computer. these are the electro magnets l want to use.   [obscured]  /item/Free-shipping-ZYE1-P34-DC-Stainless-steel-Round-Electro-Holding-Magnet-Electro-Holding-Force-18KG-12V/2011964493.html
Category: Electrical       
Skills: AutoCAD, Electrical Engineering, Electronics       

i****nyc
 [?]
Sign in to view client's details.
| i****nyc
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 19, 2015  |  Ends: 9d, 12h  |   4 Proposals
I have a large qty of wireless gaming controllers. The company no longer exists. They made 2 type, one that was a universal amd one that was not. I want to take the one that is not and convert it to be universal. It has bluetooth or sometype of wifi built in but i believe it is a fixed frequency that is out of typical range. It may be a hardware or a software solution. It does not matter as long as it works.
Category: Other - Engineering &...       
Skills: Manufacturing Design, Electronics       

j****eff
 [?]
Sign in to view client's details.
| j****eff
|    United States
Fixed Price: $500 - $1,000   |  Posted: Apr 19, 2015  |  Ends: 9d, 7h  |   4 Proposals
Hi, I'm looking for a prototype of an idea i'm working on. I need to be able to control the direction of 2 separate antennas that will be on a RC plane The antennas need to be programmed to point to my location Must be free freely rotate (spin without getting tangled) It must track the signal so that it is has the strongest signal Can provide further details if required Thanks
Category: Mechanical       

S****728
 [?]
Sign in to view client's details.
| S****728
|    United Kingdom
Fixed Price: Not Sure   |  Posted: Apr 18, 2015  |  Ends: 23d, 14h  |   10 Proposals
This posting is for the delivery of a schematic and PCB design and layout of a 40W, 110V, 60Hz sine wave inverter. This includes design documentation and all files (GERBER, etc) required to manufacture and modify the design in the future. The incoming power will be from four of the attached lithium-ion batteries, arranged in a 4S configuration, which are already regulated to a 4.1V maximum charge by another circuit. Therefore, maximum input for the inverter circuit will be 16.4Vdc. Circuit size should be no more than 3x2x1" (LxWxH), and the smaller the better in all cases. Height is of highest concern, but overall size should be as compact as possible. The inverter will be in an IP56 minimum container, so heat generation is an issue to be mindful of - heatsinking to the outside is possible, but a design that generates little-to-no heat is ideal, and should be possible with this low of wattage. Audible noise should be non-existent - transformer selection should be of high quali...
Category: Electrical       

T****unt
 [?]
Sign in to view client's details.
| T****unt
|    United States
Fixed Price: Not Sure   |  Posted: Apr 18, 2015  |  Ends: 23d, 13h  |   4 Proposals
The description of the job entails confidential information. I would require whomever interested to sign a Non-Disclosure Agreement my attorney and I drafted before discussing any details. Prefer local electrical engineer in the South Florida Tri-County area.
Category: Electrical       
Skills: AutoCAD, Electrical Engineering, Electronics       
Preferred Location: United States

g****413
 [?]
Sign in to view client's details.
| g****413
|    United States
Fixed Price: Not Sure   |  Posted: Apr 18, 2015  |  Ends: 8d, 11h  |   14 Proposals
i want to create for the shower and electronic device(water proof) that will be connected with the shower and be able to turn on and off the shower, set water to certain degree, and maybe have little speakers connected so people can connect their phone to bluetooth and play music.
Category: Product Design       
Skills: 3D Modeling, AutoCAD, Manufacturing Design       

t****093
 [?]
Sign in to view client's details.
| t****093 *
|    United States
Hourly Rate: $15 - $20 / hr   |  Duration: 1-3 months  |  Posted: Apr 18, 2015  |  Ends: 8d, 5h  |   9 Proposals
I need a wireless chip designed for wifi communication. Two of them. I need the chip to be operated by three buttons. The casting needs to fit into a watch size band. The signal constantly connecting and transmitting data to the other chip. receiver.
Category: Electrical       
Skills: Electronic Design, Digital Electronics       

k****ing
 [?]
Sign in to view client's details.
| k****ing
|    United States
Fixed Price: Less than $500   |  Posted: Apr 18, 2015  |  Ends: 83d, 4h  |   10 Proposals
I want SMPS adpter design for water purifier. The specification are as below. Input 230v AC Output 24V DC at 1.5A
Category: Electrical       

T****iya
 [?]
Sign in to view client's details.
| T****iya
|    India
Hourly Rate: $100 - $500 / hr   |  Duration: 3-4 weeks  |  Posted: Apr 18, 2015  |  Ends: 8d, 3h  |   15 Proposals
Hi I am looking for someone to design a device connect to a computer via USB and send signals to other devices of its kind on a net work, I will give a better explaination when contacted
Category: Other - Engineering &...       

A****tar
 [?]
Sign in to view client's details.
| A****tar
|    United Kingdom
Fixed Price: $500 - $1,000   |  Posted: Apr 18, 2015  |  Ends: 23d, 1h  |   2 Proposals
Hi i am looking for the multiple loop feedback structures that should be applied on continuous time current mode filter and design equations for that project. In mlf there are two topologies FLF and IFLF. we have to apply the combination of both of them in a single topology and design the equations. If any one are good in this topic please respond or you can contact me. Thanks..
Category: Electrical       

r****adi
 [?]
Sign in to view client's details.
| r****adi
|    Canada
Fixed Price: $1,000 - $5,000   |  Posted: Apr 17, 2015  |  Ends: 82d, 21h  |   10 Proposals
Automated vehicle Control System. For Mining and Construction. We are looking to develop a system where, once a vehicle enters a certain "Marked "area that a signal is sent out to the driver telling him he is within a restricted, hazardous, end of ground or slow go Area. NOTE: No antennas are allowed to be put on site and should only work from site. !!!Please refer to the "Safemine" system to get the look and feel of what we want. The system will have more options and will have to be designed accordingly!!!! The system will be used to: 1. Warn Drivers within Hazardous areas (light or alarm), slow go Areas or intersections eg. Personal Walkways. 2. Automatically reduce speed when in certain location. 3. Access control ? a. Automatically open Boom gates for Vehicles and Auto Log movement. b. More compact Versions to be used on staff to monitor their movement and restrict and warn them. 4. End of Ground Notification ? By geofencing, when vehicle get too close to end...
Category: Other - Engineering &...       

M****ies
 [?]
Sign in to view client's details.
| M****ies
|    South Africa
Fixed Price: $500 - $1,000   |  Posted: Apr 17, 2015  |  Ends: 7d, 20h  |   4 Proposals
HD quality bluetooth (not in-ear buds) headphones that are in case in thin silicone. It needs ability to be recharged, power on and off, and connect to android and apple ios. The silicone slabs will be fitted to insert into wrestling headgear.
Category: Electrical       
Skills: Electrical Engineering, Electronics       

t****483
 [?]
Sign in to view client's details.
| t****483 *
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 17, 2015  |  Ends: 7d, 17h  |   0 Proposals
Working on a project and looking to identify best fit model for current medical application candidate must have background in nucleic acid experiments
Category: Product Design       

a****eo7
 [?]
Sign in to view client's details.
| a****eo7
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 17, 2015  |  Ends: 7d, 17h  |   0 Proposals
I need an excel spreadsheet to use arduino to control stepper motors and rgb led lights, wirelessly, through something such as zigbee.
Category: Electrical       

j****511
 [?]
Sign in to view client's details.
| j****511
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job