Save this Search
     
Sort by:
  • Posted Date
Product Design
Fixed Price: Less than $500   |  Posted: 4h, 8m ago  |  Ends: 2d, 19h  |   6 Proposals
Need a 3D Model / 3D Render of a prototype I am in the process of building. It's a pocket sized electronic device that could easily fit in a purse or wallet. I am NOT looking for a wire frame or CAD design of this (yet). I need the most high quality render to be able to add this to my website as a product representation of what the final design could look like. I'm looking for someone to provide photorealistic renders in a scene (most likely a countertop) as well as an isolated image. The device is essentially the size of a credit card, but more thick. I had someone do another render on here for a product I currently have in production (  [obscured]  )... he did more than 20 individual renders in multiple colors and staged in multiple settings... he also did a fly by 3D animation as well... he did it for under $450. I say this because I dont want anyone wasting their time (or mine), by quoting me $499. I've watched remotely as these models are made and Ive seen what a good designe...
Category: Product Design       

c****ass
 [?]
Sign in to view client's details.
| c****ass
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 4h, 23m ago  |  Ends: 14d, 19h  |   1 Proposal
I am looking for someone to build a prototype from scratch. It is a "mini" PC. the size of the pc will be small.. I would like the parts and the entire prototype to cost less than $50 us dollars. This is for the parts and cost of everything (not labor). I would like the below configuration for the prototype. Please tell me your final cost to make this prototype for me. You will get all the parts (or make it), up to you. but the prototype itself should not cost more than $50 us dollars to make. Please get back to me if you have any questions or please get back to me with a quote to make this prototype and ship it to me in USA PC Configuration Prototype - 1.8 ghz processor or higher - 4GB ram - 32 gb SSD (if expensive maybe flash storage but only If its significantly cheaper) - 1 HDMI (must support 4k+2k resolution) - Minimum 2 and maximum 4 - USB 3.0 connections (if 4.0 USB connection is same price that's fine too) - Ethernet connection - Wifi - 802.11 b/g/n/ (if ac is same ...
Category: Product Design       

k****amm
 [?]
Sign in to view client's details.
| k****amm
|    United States
Fixed Price: Less than $500   |  Posted: 8h, 8m ago  |  Ends: 14d, 15h  |   0 Proposals
Please do let me know is there someone who can design an elevator control as per a sample design which can be a base for the same
Category: Product Design       
Skills: Manufacturing Design, Electronics       

m****oor
 [?]
Sign in to view client's details.
| m****oor
|    Kuwait
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 03, 2015  |  Ends: 13d, 22h  |   12 Proposals
The job is for the product design of a pair of sports wrap around sunglasses which contain electronics at the corners before the leg hinges. A single lens design with the nose bridge completely separate from the frame is wanted. The two main electronics modules are approximately 12mm*12mm*3mm to be embedded at the corners of the frames and with 4 buttons also located at the corners. Wiring between the modules needs to run behind the top of the glasses lens. Below shows examples of the desired style:   [obscured]  /item/Men-s-Sunglasses-100-Top-Quanlity-Sports-Sunglasses-fashion-sunglasses-brand-sunglasses-Ride-Glasses-eyeglasses-sports/355777567.html   [obscured]  /oakley-wrap-around-sunglasses/p/itmdtz5s6qjkgxzw   [obscured]  /sports-wrap-around-sunglasses-d548-orange-uv400/
Category: Product Design       

b****eda
 [?]
Sign in to view client's details.
| b****eda
|    Ireland
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 02, 2015  |  Ends: 28d, 0h  |   2 Proposals
Blow our minds and design a Sparx Smart System for Pets! Imagine that you are on your way home and you want to adjust the temperature before you get home or turn on the lights or feed your dog, make coffee, play music or unlock your garage door. You reach for your smart phone, open a SparxSmart app and you do your smart thing. Or imagine that you go on vacation and realize that you forgot to turn off the AC (like me). You simply reach for your smart phone, click and voila! You've just saved yourself $200 and also saved the environment from adding redundant carbon emissions. Now, imagine the future - your house learns from you what you like and so when you arrive home, it greets you and adjusts your living space, just the way you like it. Once integrated in our daily lives, Sparx Smart offers convenience, security, energy saving and intelligence. Our spaces of the future will be responsive, adjustable, dynamic and will evolve, wherever we are. Say hello to Sparx, Say hello to the F...
Category: Product Design       

A****QLD
 [?]
Sign in to view client's details.
| A****QLD
|    China
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 02, 2015  |  Ends: 12d, 1h  |   3 Proposals
I would like to create the next biggest WII game or computerized game. The game would have Motion Path behavior where there will be rotating objects in sync with one another. There will be custom speed option for motion path as well. It will be used for exercise, and also the objects will move to the beat of music. So it can be programmed to music. It will be a cool fun game for kids of all ages! I am not sure all who would be involved. I would think an engineer and an IT person. Help!
Category: Product Design       

w****tee
 [?]
Sign in to view client's details.
| w****tee
|    United States
Fixed Price: Not Sure   |  Posted: Jul 31, 2015  |  Ends: 10d, 22h  |   8 Proposals
Looking to design a device which can be the size of a Samsung Note 2/3 (or smaller) and thickness doesn't really matter. The purpose of this device is to perform the following functions: - Send GPS signal of device's location - Capable of reading weight 5lbs min (Can be a mat (cloth) or something similar so when object is placed it'll read that weight when it goes past 5lbs. When weight goes above 5lbs it'll have indicator light on the actual device to show the weight of 5lbs or more is present. - Make an audible alarm (just like you'd hear on your smart phone) - Capable of communicating with the Mobile APP (Bluetooth) - Temperature reading capability - Device should have LED indicators - Device should be able to run on rechargeable lithium-ion battery and should be able to deliver performance signal for 10 hours - GPS is NOT activated after a certain action is not performed within the specified time (Save on battery life) The purpose of this device (size of smartphone) it'll ...
Category: Product Design       

W****2Go
 [?]
Sign in to view client's details.
| W****2Go
|    United States
Fixed Price: Not Sure   |  Posted: Jul 31, 2015  |  Ends: 10d, 3h  |   5 Proposals
Hi I want to make battery powered individually addressable LED strip lighting. I want to control this strip lighting with a cell phone app. Do you think this is something you can do?
Category: Product Design       

b****605
 [?]
Sign in to view client's details.
| b****605
|    United States
Fixed Price: Not Sure   |  Posted: Jul 31, 2015  |  Ends: 10d, 3h  |   12 Proposals
Hi I want to make battery powered individually addressable LED strip lighting. I want to control this strip lighting with a cell phone app. Do you think this is something you can do?
Category: Product Design       

b****605
 [?]
Sign in to view client's details.
| b****605
|    United States
Fixed Price: Less than $500   |  Posted: Jul 30, 2015  |  Ends: 9d, 15h  |   3 Proposals
Hello, I need a generic obd interface (hardware + plus software) , which can gather all available information provided by the machine and provide it as an xml. The hardware can be configured to monitor certain parameters like - car speed, car pollution efficiency (via some mechanism), braking or zig zag driving. and store this value and when required push it via obd cable (or wifi) based on configuration.
Category: Product Design       
Skills: Electronics, Embedded System, OBD Interface       

S****Vai
 [?]
Sign in to view client's details.
| S****Vai
|    India
Fixed Price: $500 - $1,000   |  Posted: Jul 30, 2015  |  Ends: 9d, 15h  |   5 Proposals
Hello, I need help in designing a prototype for water flow meter. (which can be then updated be measure gas too). Following functionalities are required a) Minimum battery consumption b) Tell volume flow in literes in last x minutes , and should store last n readings. c) On request or or automatic convey the information via ipnetwork to a machine.
Category: Product Design       

S****Vai
 [?]
Sign in to view client's details.
| S****Vai
|    India
Fixed Price: Less than $500   |  Posted: Jul 30, 2015  |  Ends: 9d, 7h  |   3 Proposals
I am looking to create a frisbee for a new game i have invented. The frisbee needs to be approx 175g including the electronic timing device. What i hope to achieve is a frisbee that when thrown is just a normal frisbee, but when caught it activates a variable timer 2/3/4/5 sec. The timer then activates LED's to flash if the frisby is not spinning before the time has lapsed. The electronics need to be moulded within the plastic with access to the battery and the switch for on/off and varying the timer needs to be accessible. Finally the unit needs to be waterproof, sand proof etc. As this will predominantly be a beach game.
Category: Product Design       

a****808
 [?]
Sign in to view client's details.
| a****808
|    Australia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 29, 2015  |  Ends: 9d, 0h  |   7 Proposals
My company has an injection pump system that is in need of a complete redesign. The product was introduced in 1995 and it needs a modern overhaul. The system is comprised of a pump, tank, tank base, mixer motor and shaft, plumbing assembly, and dual control switch assembly. Tank and Base are rotationally molded parts. Designer needs to have experience/understanding of the roto-molding process and roto-molded part designs. System upgrade needs will be discussed with designer. Expectations are that the designer will understand our needs and updates, make sure that those needs are met while providing creative, functional and engineered aspects of his/her own. Designer will need to sign a confidentiality and work-made-for-hire agreement after selection.
Category: Product Design       

T****orn
 [?]
Sign in to view client's details.
| T****orn
|    United States
Fixed Price: $50 - $200   |  Posted: Jul 28, 2015  |  Ends: 7d, 18h  |   3 Proposals
I need patent drawings for a new dog jacket product that we are going to patent. The drawing should be completed as per the requirements of the US patent office. The file format will be determined by the patent office. There will be two drawings. The first will be an illustration of the jacket and the second will be a illustration of how it functions. The drawings will include at a minimum, type of material, buckle locations, etc.
Category: Product Design       

d****015
 [?]
Sign in to view client's details.
| d****015
|    United States
Hourly Rate: $20 - $50 / hr   |  Duration: 3-4 weeks  |  Posted: Jul 28, 2015  |  Ends: 7d, 15h  |   4 Proposals
Hoping to get initials (JSF) in a nice overlapping and/ or cubic design. Also hope to have lettering raised (blind embossed) and no color besides black gold and silver.
Category: Product Design       
Skills: Electronic Design       

B****f32
 [?]
Sign in to view client's details.
| B****f32
|    United States
Fixed Price: Not Sure   |  Posted: Jul 28, 2015  |  Ends: 7d, 10h  |   4 Proposals
looking for a company to design and prototype a sliding gate motor with remote controls. A sample sliding motor with remotes will be provided to the right company. The manufacture cost of the motor must be $50. Company must have mechanical and electronic design experience. A sample sliding gate motor can be provided to aid in the design. Most important aspect is to reduce production cost of the motor. Target production cost must be no higher than $50.
Category: Product Design       

r****014
 [?]
Sign in to view client's details.
| r****014 *
|    South Africa
Fixed Price: Less than $500   |  Posted: Jul 28, 2015  |  Ends: 7d, 8h  |   2 Proposals
Hi, We need complete working design with working model of 40 MHz 20 W RF Amplifier. For design consideration 1) Input will power 12V DC 2) Facility to interface the amplifier with microcontroller - for setting frequency from 40MHz to 41MHz - for setting sensing o/p watts. - to Turn ON/OFF RF output. 3) Load will be capacitive
Category: Product Design       
Preferred Location: India

A****001
 [?]
Sign in to view client's details.
| A****001
|    India
Fixed Price: $1,000 - $5,000   |  Posted: Jul 27, 2015  |  Ends: 51d, 11h  |   26 Proposals
Hello, I'm currently adding to a robot prototype I have, and would like to work with someone who has experience in working with manufactured products. Ideally you are a mechanical/electrical engineer or an industrial designer that would either help with the internal electronics and motors or a designer who will help with materials and 3D designs that are ready for manufacturing. The things I have already worked out are: - The way the robot navigates - Self balancing on ball (see picture) - Dimensions The things I need work on: - A way to interact with the robot - Developing the arms to fit the design - Work with parts (micro processor and such) to help when it comes to manufacturing
Category: Product Design       

s****awy
 [?]
Sign in to view client's details.
| s****awy
|    Canada
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 22, 2015  |  Ends: 1d, 18h  |   9 Proposals
My company markets various consumer products, primarily low-tech electronics such as flashlights, lanterns, various LED lighting (decorative, seasonal), occasional furniture, hand tools and implements. Need some mechanical/industrial design assistance to refine/modify/update/stylize products selected from Asian manufacturing partners. Some graphic art assistance would be a welcome additional skill set as well as some photo-realistic imaging. Have competent Chinese engineers at my factories to execute these modifications, the creation of which, however, is beyond their capabilities. San Diego domiciled freelancer desired.
Category: Product Design       
Skills: AutoCAD, Product Design       

n****nor
 [?]
Sign in to view client's details.
| n****nor
|    United States
Fixed Price: $70 - $100   |  Posted: Jul 22, 2015  |  Ends: 1d, 14h  |   0 Proposals
I am looking for someone to quickly write an mplab harmony project which has a cdc com port and mass storage device and is capaple of reading an at45db641e memory chip. The board we have has a pic32mx250f128d. The memory chip is interfaced using spi.
Category: Product Design       

H****530
 [?]
Sign in to view client's details.
| H****530
|    United Kingdom
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 22, 2015  |  Ends: 1d, 13h  |   1 Proposal
Need some design help with electronic component selection and other safety design aspects of design for C1D1 wireless tank sensor. UL913 UL/CSA 60079-0 UL/CSA 60079-11 Mostly complete but need some consultative input.
Category: Product Design       
Skills: Electronic Design       

r****o99
 [?]
Sign in to view client's details.
| r****o99
|    United States
Fixed Price: $500 - $1,000   |  Posted: Jul 21, 2015  |  Ends: 21h, 0m  |   3 Proposals
I need an expert in optics to design and perhaps build a video display that would be fit in sunglasses and not strain the user. The job is very open and the worker is expected to provide innovation as this probably has not been done before. Some ideas that could be implemented are holographic waveguides, nano-pixels, or oleds. Challenges include: -Not blinding the user. -Creating a focus-able object very close to human eyes -Must be able to connect to a streaming circuit. -Must be reproducible (teach to manufacturers, pictures and drawings along the way) All parts will be bought by me. Final product will be shipped to me at the end and the shipping will be paid by me. If final product is patentable the creator may co-patent with me. If the project is a success, creator will be asked to join the company.
Category: Product Design       

K****h10
 [?]
Sign in to view client's details.
| K****h10
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: 3-4 weeks  |  Posted: Jul 18, 2015  |  Ends: 8d, 0h  |   7 Proposals
Hi - I am wanting to build a custom version of the TI Sensortag. I noticed you did a similar project not long ago. Can you provide some details. My project requires addition of the following; - Larger Rechargeable Battery - More storage - Brighter LEDS - Stronger Buzzer The PCB will need to be relayed out to include above changes.
Category: Product Design       

e****ell
 [?]
Sign in to view client's details.
| e****ell
|    Australia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 16, 2015  |  Ends: 26d, 14h  |   6 Proposals
Looking for a capable team (preferably from India) with proven experience to assist us in developing, prototyping/finding manufacturing partnerships for a uniquely designed waterproof GPS tracking device which communicates with mobile application to notify of location using bluetooth technology. More features to be discussed when chosen and after signing NDA. Looking forward to working long term.
Category: Product Design       
Preferred Location: India/Southern Asia

a****010
 [?]
Sign in to view client's details.
| a****010
|    India
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job