Save this Search
     
Sort by:
  • Posted Date
Fixed Price: $250 or more   |  Posted: 5h, 56m ago  |  Ends: 29d, 18h  |   3 Proposals
A square shaped,durable light weight compartment. About 6 inches in hieght, )10 inches in length, and 8 inches in width. With the capability of releasing it's inner contents via push of a button, from a remote control.The frequency of the device being strong enough to transmit a secure signal up to 20 miles.
Category: Other - Engineering &...       

g****od9
 [?]
Sign in to view client's details.
| g****od9
Fixed Price: Less than $500   |  Posted: 9h, 1m ago  |  Ends: 14d, 14h  |   5 Proposals
hello, I'm looking for someone who has an experience ( most likely an engineer) that can do me a prototype for a compressible ( foldable ) mug. that coffee mug can also can also make the coffee hot by connecting it with a USB. please keep in mind that i need a working prototype because the mug will be taken into a next level which is manufacturing. if you can deliver me the followings, then please send me your proposal. ? a working prototype of the mug ? the that can be compressed ? the mug has somehow a heating feature ? he mug should be printed and shipped because no 3D prinitng companies are available here ? milestones should be given every while ? the work should be done fast because its a part of a graduation project please take into consideration that the budget doesn't include the cost of the prototype 3d printing.
Category: Other - Engineering &...       

s****leh
 [?]
Sign in to view client's details.
| s****leh
|    Qatar
Hourly Rate: $30 - $40 / hr   |  Duration: 1-2 weeks  |  Posted: 12h, 34m ago  |  Ends: 14d, 11h  |   4 Proposals
Hello friends how are you? My problem is this: I am using a PIC16F887 microcontroller to program with C CCS pic c compiler. I have two push bottom one for and one for RB5 RB4. When I press RB4 a green LED should flash for 7 seconds, after which it goes and lights a red LED. When I press a push botom to RB5, the red light goes off and a blue LED blinks for 7 seconds, after which the program is reset, ports and flags are cleaned to start a new cycle. It is very important that must be programmed in CCS C
Category: Product Design       

l****936
 [?]
Sign in to view client's details.
| l****936
|    Mexico
Fixed Price: Less than $500   |  Posted: 17h, 0m ago  |  Ends: 14d, 6h  |   2 Proposals
i am seeking a person who knows about arduino .i need circuit and pcb layout design for arduino based home automation system.
Category: Product Design       

b****i09
 [?]
Sign in to view client's details.
| b****i09
|    India
Hourly Rate: $15 - $50 / hr   |  Duration: 1-2 weeks  |  Posted: 22h, 6m ago  |  Ends: 14d, 1h  |   0 Proposals
This project is specifically for the optimization of a Serit SP2636 Tuner using the ST Chip sets STV6110A and STV0903. We have the circuits working but do not perform as good as another similar system that we built. The Serit SP2636 is equivalent to the Sharp F7HZ0169 tuner can. The will require an advanced knowledge of DVBS2 circuit design including external hardware and the ability to optimize the software until the performance of this Tuner PCB matches our previous design. Experience in this area is a must.
Category: Electrical       

r****gul
 [?]
Sign in to view client's details.
| r****gul
|    United States
Fixed Price: Less than $500   |  Posted: Jul 04, 2015  |  Ends: 28d, 19h  |   7 Proposals
We are looking to hire a firmware developer to assist us on a project to read data from a CCD array using a ARM Cortex M3 microcontroller. We already have a working prototype from other freelance developers/open source designs and for this fixed price project we just want someone who show competence in understanding the project and help us migrate the firmware from one demo board to another. This job post is just to identify right freelancers and test their skills before we start working on a hourly basis. Experience in hardware oriented / embedded firmware development - Excellent Programming Skills in C language. Some experience with GUI using java, python etc desired too. - Should have working experience with Atmel/Freescale/STMicro development tools - A major plus if you have previous work experience with CCD - previous experience on low cost demo boards from NXP and TI - Knowledge of ARM Cortex Controllers & Digital Hardware Circuits is desirable - Should have excellent de...
Category: Electrical       

j****t87
 [?]
Sign in to view client's details.
| j****t87
|    United States
Fixed Price: Not Sure   |  Posted: Jul 04, 2015  |  Ends: 13d, 19h  |   9 Proposals
I am looking for an Electronic engineer with an understanding of hardware-software integration to help me determine if a project is feasible as well as come up with a list of components that can be used. Stage two preferable from the same individual will be to prototype. In global terms elements of this project deals with surface pressure and vibration.
Category: Other - Engineering &...       

n****per
 [?]
Sign in to view client's details.
| n****per
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: Jul 04, 2015  |  Ends: 13d, 18h  |   7 Proposals
The task is simple, recreate the teensy 3.1 with the same number of pins and specs, just make it as thin as possible using thinner pcb, chips on the back, etc. Bidders must provide evidence that they have experience designing and producing electrical chips. We need someone that can take this project through to a working prototype. If after thorough testing we agree that it performs to our satisfaction, we will look to produce the chips in some quantity but what you should bid for is just for building us a prototype.
Category: Electrical       

h****eye
 [?]
Sign in to view client's details.
| h****eye
|    Canada
Fixed Price: $500 - $1,000   |  Posted: Jul 04, 2015  |  Ends: 13d, 13h  |   3 Proposals
ITALIANO: Ricerchiamo un ingegnere elettronico con esperienza nella programmazione FPGA e generica e nel campo di crittografia, per collaborare allo sviluppo di un miner per l'algoritmo script (litecoin, dogecoin). preferibilmente italiano ma non necessariamente. Il progetto prevede la realizzazione di un miner con un potenza congrua alle difficoltà di mining attuali, pensavamo ad un 400MHs/s o superiore: possiamo fornire: - esperienza decennale nella realizzazioni di master e pcb anche multuilayer e disponiamo di software avanzato per il disegno elettronico -abbiamo accesso illimitato e gratutito ad un infinità di componenti elettronici -realizzazione dei PCB e prototipi rapidissima e presso un nostro terzista di fiducia a basso costo -possibilità di reperire facilmente E RAPIDAMENTE I COMPONENTI NECESSARI RICHIEDIAMO UNA PERSONA SERIA E CON ESPERIENZA ED APPASSIONATA NEL CAMPO DELLE CRYPTOVALUTE, PER LO SVILUPPO DELLO SCHEMA ELETTRICO E PER L'EVENTUALE PROGRAMMAZIONE. DISPONIBI...
Category: Electrical       

p****964
 [?]
Sign in to view client's details.
| p****964
|    Italy
Fixed Price: Not Sure   |  Posted: Jul 04, 2015  |  Ends: 13d, 11h  |   2 Proposals
Need a DVR surveillance system designed and prototype. Preferably be able to record on a Flash drive or SD card. This system needs to be as small as possible. I would be completely fine with a USB port connected to a camera that plugs into a Flash drive. Need the system to be able to hold at least 2 cameras and record even after a vehicle or motorcycle has been parked. To conserve battery the system can go to sleep after a certain period of time of inactivity.
Category: Product Design       

Y****212
 [?]
Sign in to view client's details.
| Y****212
|    United States
Fixed Price: Not Sure   |  Posted: Jul 04, 2015  |  Ends: 13d, 11h  |   7 Proposals
I have an idea that not only will be useful for me but many other people. I want to make a motorcycle lock with alarm, similar to Xena. This lock will have a remote key fob that will disable the electric shock option. The problem with the XENA locks is that, you can cover the speaker with your finger and the alarm can't be heard. After 15 seconds the alarm shuts off. Please respond with quotes and proposals.
Category: Product Design       

Y****212
 [?]
Sign in to view client's details.
| Y****212
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 03, 2015  |  Ends: 13d, 4h  |   8 Proposals
We have an ongoing requirement for the services of a control systems engineer who can assist with the creation of front end hardware design for the purposes of quotation.
Category: Electrical       

K****lia
 [?]
Sign in to view client's details.
| K****lia
|    Australia
Fixed Price: $50 - $100   |  Posted: Jul 03, 2015  |  Ends: 13d, 2h  |   4 Proposals
I need someone to help me in designing a usb wrist cable for charging cell phones that can be worn as a bracelet.
Category: Electrical       

N****007
 [?]
Sign in to view client's details.
| N****007
|    Saudi Arabia
Fixed Price: Not Sure   |  Posted: Jul 03, 2015  |  Ends: 12d, 22h  |   15 Proposals
I need to build a control device for something I'm building. I need to control a stepper motor to feed a wire, and then I need a 1-3 second delay, and then move a separate servo motor, to control a lever. I will build all the other components, I just need someone to provide me with all the electronic components (Arduino, Button, small readout Screen, 1 Stepper, 1 servo motor etc...). Here is what I would ideally like: 1. 2 button control (with a display) - 1st button will start the action (GO) - 2nd button will control count (So I would like to repeat the Go function 1 - 9 times) 2. So when the User presses the GO button, the Stepper motor will feed Slowly lets 360 Deg (I will need to able to change this in the code, because I need to specify the length and speed of the feed, which I need to measure after installation) - This motor dosn't have to be strong at all, I'm just feeding a small wire with this. 3 Once the stepper finishes its move I would like 1-3 second delay...
Category: Electrical       

d****hbt
 [?]
Sign in to view client's details.
| d****hbt
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: Jul 03, 2015  |  Ends: 23d, 18h  |   7 Proposals
Static Voltage Stabilizer To design and build prototype of fully solid-state static voltage stabilizer using IGBT/ MOSFET in PWM AC Chopper/Inverter topology with Buck Boost Transformer with any suitable DSP IC # Deliverables WORKER MUST PROVIDE : 1. Complete and detailed Schematic Diagram of the product. 2. Complete artwork of the PCB including laser print out of the tracks and pads, laser print out of component layout (silk screen), laser print out of soldering masking (Green masking). 3. Complete component list and location of the components on PCB. 4. Explanation of the working theory. 5. Assembling and testing methods. 6. Fault finding / trouble shooting. 7. Full winding details of the transformer 8. Wiring details 9. source code and hex code. 10. detail schematic in pdf, simulated schematics in proteus v.7.6 detail PCB in pdf format (single sided) complete source code in c_language with hex file. 11. Three assembled and tested cards suita...
Category: Electrical       

i****ani
 [?]
Sign in to view client's details.
| i****ani
|    India
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 03, 2015  |  Ends: 8h, 10m  |   9 Proposals
The goal of this project will be to update a design of a PCBA for a 2500 mAh LiPo single battery power bank. PCBA specifications: Hi, we have not found a part number of the main IC. We are now choosing a provider to update this design to a new IC. We'd like the resulting design: - to reuse as much as possible from the existing design - to fully comply with this list of requirements: 1. Input: DC5V 1A, so that battery charges at 1Amp rate 2. Outputs: two independent outputs, DC5V 1A. Connection of an external device to one output automatically blocks the other output. 3. Built-in protections for input and outputs: 3.1. overvoltage 3.2. overcurrent 3.3. short circuit 4. Built-in protections for battery: 4.1. Overcharge 4.2. Overdischarge 4.3. Overcurrent 4.4. Overheating 5. Battery charging/discharging: standard 3.7V LiPo battery charging cycle, 2500 mAh battery (we will provide the samples) 6. Simple shake sensor: activates LED indication. Example:   [obscured]  /Electron...
Category: Electrical       
Preferred Location: North America, Western Europe, Eastern Europe, Eastern Asia

a****kov
 [?]
Sign in to view client's details.
| a****kov
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: Jul 02, 2015  |  Ends: 12d, 4h  |   11 Proposals
We are looking for a electronics purchasing agent located in Shenzhen. Our company   [obscured]   is in the process of sourcing and manufacturing our product. We would like an agent that has experience in negotiating and purchasing electronics. The agent must be fluent in English. They would be responsible for negotiating product pricing, working on product certification, product quality assurance, and any other tasks to help us achieve full scale production. Consumer electronics experience is needed.
Category: Other - Engineering &...       
Preferred Location: China

s****rc1
 [?]
Sign in to view client's details.
| s****rc1
|    United States
Fixed Price: Not Sure   |  Posted: Jul 02, 2015  |  Ends: 12d, 3h  |   5 Proposals
i need an engineer to design me a device that is hooked up to the owner's shower. This device will be able to turn on the shower or bath with the press of a button. It should be as easy to press as an iphone. The device will also be able to connect to the owner's bluetooth on whatever wireless device. The device will have some kind of speaker implemented into it that will allow for music to play through. The device will also let owner choose temperature. They can control the temperature by increasing or decreasing by pressing up & down arrows. The hotter the temperature the redder the numbers get. Colder they get bluer.
Category: Product Design       

t****093
 [?]
Sign in to view client's details.
| t****093 *
|    United States
Fixed Price: Not Sure   |  Posted: Jul 02, 2015  |  Ends: 12d, 2h  |   3 Proposals
I have to build a simulink model of a POWER SYSTEM INFINITE BUSBAR. The model have to be built in simulink using blocks from the simulink library.
Category: Other - Engineering &...       
Skills: Manufacturing Design, MathCAD, Electronics       

r****deo
 [?]
Sign in to view client's details.
| r****deo
|    Trinidad And Tobago
Fixed Price: $1,000 - $5,000   |  Posted: Jul 02, 2015  |  Ends: 12d, 0h  |   5 Proposals
We are looking for a electronics purchasing agent located in Taiwan. Our company   [obscured]   is in the process of sourcing and manufacturing our product. We would like an agent that has experience in negotiating and purchasing electronics. The agent must be fluent in English. They would be responsible for negotiating product pricing, working on product certification, product quality assurance, and any other tasks to help us achieve full scale production. Electronic experience is needed.
Category: Other - Engineering &...       
Preferred Location: Taiwan

s****rc1
 [?]
Sign in to view client's details.
| s****rc1
|    United States
Fixed Price: Not Sure   |  Posted: Jul 02, 2015  |  Ends: 11d, 23h  |   9 Proposals
1) RFID based locking solution (Mandatory) ? Making an RFID based lock. ? Integrating the RFID based lock with the Raspberry Pi/Black Beagle. ? The Raspberry Pi should contain the database of RFID tags, which can be updated via an online server (Azure Web can be used to create the web interface), and we should be able to add the RFID tags directly using the web server. ? We must be able to get the logging data (check in time, checkout time, RFID tag no.) on either a note or excel sheet. ? Remember, only one user should be able to use the locker at any given point of time. Reference to how it may look like:   [obscured]  /watch?v=4lra1Y2RsWM 2) Temperature control ? Will be using a simple exhaust fan connected to a relay. ? Measure the temperature using a temperature sensor. ? The raspberry pi should signal the relay to turn on the fan when temperature inside the locker goes above 77 degrees Fahrenheit. 3) Capturing videos and streaming our Internet. ? We need to capture ima...
Category: Electrical       

j****ota
 [?]
Sign in to view client's details.
| j****ota
|    United States
Fixed Price: Less than $500   |  Posted: Jul 02, 2015  |  Ends: 11d, 22h  |   6 Proposals
Need consultant for the selecting best home automation for home , provide with possible matrix to compare best home automation standards which can also be controlled by Ipad , building best home server with firewall , media center and etc
Category: Other - Engineering &...       

h****azi
 [?]
Sign in to view client's details.
| h****azi
|    United Arab Emirates
Hourly Rate: $40 - $50 / hr   |  Duration: 7-9 months  |  Posted: Jul 02, 2015  |  Ends: 11d, 20h  |   7 Proposals
Hello everyone! We are looking for a freelance engineer who is able to design or to build this device   [obscured]  -o-moto.com/moto-sajt/raznoe/motodrajv/letayushchij-mototsikl
Category: Other - Engineering &...       

M****man
 [?]
Sign in to view client's details.
| M****man *
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job